Currently, when becoming inactive, PD leaves the HDC and input
limited interrupt enabled.
Correct it by disabling it.
Change-Id: I62a1d837f6126951cb428a982fe1d8876f1d5bdc
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Correct the checks while setting the max scaling frequency supported
by the card. With the present checks, even for HS card max frequency
would set as max frequency of HS200 card.
Change-Id: Ie8b42229ef189e591f49b227d043f6186aa7e205
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
SDHC core with 14lpp tech DLL should not enable PWRSAVE_DLL since
such controller's internal gating cannot meet following MCLK requirement:
when MCLK is gated OFF, it is not gated for less than 0.5us and MCLK must
be switched on for at-least 1us before DATA starts coming.
Since all the latest versions of sdhc host has this 14lpp tech DLL
Don't set PWRSAVE_DLL bit accordingly.
Change-Id: I7cccc79a79b32a33e74212fc5f41408c2e07b5cb
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Enable SDHC FIFO explicitly by disabling the alternative FIFO.
The boot-loaders might use alternative FIFO instead of HC FIFO.
And the vendor specific register which has this setting won't get
reset with controller reset. So the FIFO setting done by the
bootloader would remain as it is unless its explicitly cleared.
Without clearing this setting, mmc driver can't make use of regular
FIFO mode.
Change-Id: I8c7ff9b20c33518fb9013cce2f9284117fc2ce3c
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
In case of HDMI interface as primary, if device boots up with
HDMI connected, external interface driver is unable to notify
audio events as audio codec is getting registered later.
Add change to send audio event once audio codec gets registered.
Change-Id: I8d630adf892714ff2eb4d6039dc058b54c425b83
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Modify HDMI driver so that video and audio events are notified
separately. Notify video events asynchronously. send audio
events only after video is up.
Change-Id: Ie6e4e564456d65f6b6d733b8accd14b9ce4c7e15
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
When several threads permanently, e.g., read/write the debugfs
file that triggers vfe_debugfs_statistics_read(), the content of
stats will be modified in an unintended manner, add spin_lock
to protect that.
Change-Id: I15d46498e669132ef1d1f5ad9c4305ee5fdb0da4
Signed-off-by: Ramesh V <ramev@codeaurora.org>
Fix system crash bug when run multiple vidc instances
Change-Id: I7716854c210bf8d1191e2744e555d42f42e4a1f5
Signed-off-by: Yigang Zheng <yigangz@codeaurora.org>
A ctrl-c while the venus session is on causes WARN_ON
from function __vb2_queue_cancel. This fix will ensure that
all buffers are returned to vb2 when a stream off is called.
Also there is no need to process release reference event in
the case of session stop.
Change-Id: Id7bf05a17efe237791ad17585d04b59a16bd76d8
Signed-off-by: Praveen Kumar Dwivedi <pkd@codeaurora.org>
Remove format identifiers in the register dumping
function which incorrectly recognizes the offset and
the count of the registers to be dumped.
Also, reduce the chunk of memory copied from the SDE
hardware register range to align with the existing
register dumping mechanism.
Change-Id: I1ce7148275f5287e568fe6efc8774f4d495cdaa4
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Enable address sanitizer flags for kasan by default.
Change-Id: Ib08149a7d1af589fed3ce30659cb495d4bb2fb81
Signed-off-by: Mao Jinlong <jinlmao@codeaurora.org>
Currently we allocate IPC log buffer when instance is created,
and free IPC log buffer when instance is freed.
So we can't get IPC log when issue happens after the instance
is freed.
Move IPC log buffer allocate and free to module init and exit.
Change-Id: Ic8b0f6d91c9bbbf2a6a6ed87f96c04475a09b7f3
Signed-off-by: Liangliang Lu <luliang@codeaurora.org>
Whenever dwc3_msm_probe() fails, it calls of_depopulate() to remove child
devices as part of cleanup. Due to this, usb_bam_remove() gets called to
do cleanup. But this API is not deleting IPA resources created during
probe and leads to creation of IPA resources fail, when probe is called
again. This eventually results in crash, when IPA driver calls notify
callback after PROD resource granted. Hence fix it by deleting IPA
resources in usb_bam_remove().
Also change enum type of ipa_rm_resource_prod/ipa_rm_resource_cons arrays
to enum ipa_rm_resource_name to fix sparse errors.
Change-Id: I3d9d0e1b26f1de0ba2b56b42c7e10a097d4fa8be
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Compander disable sequence does not get called
after headphone playback on fm. This results in
mute at one channel and low volume at other channel.
Low volume is resolved by setting analog mode to manual
while compander is off.
Also compander clock should be disabled at the end to
resolve mute issue.
CRs-Fixed: 2102126
Change-Id: I68e72f3b333117a8fdf379db30dc24de9bed7270
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
QOS LUT dtsi entries use existing hardware parsing APIs
but dos not increase the size of array. This causes out of
bound access while reading u32 lut array entry. This patch
fixes the array size and also adds checks to avoid future
out of bound access. It also fixes the memory leak in
qos lut parsing.
Change-Id: I98de052d03e1bcfd79d15ab99ca41d7782e56682
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add dummy device for SPSS ETM. This device can be used to
configure SPSS ETM trace path.
Change-Id: Idd060ce0de61acab7842103f47c838f4a618d9df
Signed-off-by: Saranya Chidura <schidura@codeaurora.org>
Uninitalized kernel variable passes to userspace, it may have data
from stack. To avoid data leak from kernel to userspace initializes
struct kgsl_gpuobj_import_useraddr to zero.
CRs-Fixed: 2096006
Change-Id: Ib79b030cd5e3edd7279632af20dc3fac95eb73d4
Signed-off-by: Archana Obannagari <aobann@codeaurora.org>
