[ Upstream commit 65f11c72780fa9d598df88def045ccb6a885cf80 ]
Enable force feedback for the Thrustmaster Dual Trigger 2 in 1 Rumble Force
gamepad. Compared to other Thrustmaster devices, left and right rumble
motors here are swapped.
Signed-off-by: Ilya Trukhanov <lahvuun@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Add the proper non-secure CB configuration required for video
codec MMU on msm8996.
Change-Id: I4952e31d1154a7043b871a54be2d29a7a709e45f
Signed-off-by: Bo Fang <bofang1@codeaurora.org>
Add check in i2c driver to ensure the client passes valid messages
for i2c transfer.
Change-Id: I75ceee649d387e4324155c01d0c1e8a40342dff5
Signed-off-by: Vipin Deep Kaur <vkaur@codeaurora.org>
Release interrupt synchronously on driver teardown such as during
re-enumeration, manual rmmod and device power down.
Change-Id: I8a2f97266513001ed9a6c08b8ca865c9ffac9065
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
OverlayFS should be enabled only for new launch target,
so disabled it for OTA target i.e. sdm660 & msm8998.
Change-Id: Ib1f3cadd888d345bd58a945996f887e0831ea6e0
Signed-off-by: Rahul Shahare <rshaha@codeaurora.org>
In some rare scenario, race condition is observed between
rls_work handler and ufshcd_resume operation.
Sequence of events:
1.rls_work is scheduled due to UIC error.
2.ufshcd_rls_handler sets host_self_blocked to 1 and then
invokes pm_runtime_get_sync
3. pm_runtime_get_sync is not yet completed because
runtime_status was RPM_RESUMING.
4.pm_runtime_work schedules at almost same time of rls_work.
Here ufshcd_resume schedules out as host_self_blocked
was set to 1 by rls_work.
Call stacks:
-006|wait_for_completion_io(?)
-007|blk_execute_rq()
-008|scsi_execute()
-009|scsi_execute_req_flags()
-010|ufshcd_set_dev_pwr_mode()
-011|ufshcd_resume()
-012|ufshcd_runtime_resume(hba)
-013|ufshcd_pltfrm_runtime_resume(?)
-014|pm_generic_runtime_resume(?)
-015|__rpm_callback(inline)
-003|schedule()
-004|spin_lock_irq(inline)
-004|rpm_resume()
-005|__pm_runtime_resume()
-006|ufshcd_rls_handler()
Fix this by calling pm_runtime_get_sync before setting
host_self_blocked to 1 during rls_work.
Change-Id: I69f23c169ac8a9eb59062b461302f5521cd57ebc
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
For wlfw_msa_mem_info_send_sync_msg QMI request to firmware,
it expects range of addresses and size in response from firmware.
Correct condition used to check whether address and size in
response fall under valid range.
Change-Id: If431fdf3d2bd8a913bd5ee34e0a5778d7c2f36e7
Signed-off-by: Naman Padhiar <npadhiar@codeaurora.org>
Fix type casting of channel descriptor to avoid memory access
violations during the descriptor usage.
Change-Id: I3d73bf327fd796f482e492265d18d3417f21dc9a
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Update card state change API to synchronize multiple invocation
of the same API from different drivers.
Change-Id: I03c18a9540bdb64fa462262faa9cabe158e9e199
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Add ipc router sdio plugin config in Makefile and Kconfig
to enable it for compilation.
Change-Id: If3bc8e812240bd86f2ef3bc63452edcdf69deac6
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Disable logs to console after reporting error only once,to stop
excessive prints on console whcich causes watchdog bite due to
console lock up.
Change-Id: I26d9f3f258e0428c059440369c88691b2d523bba
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Free rx DMA buffere after the data is read from the buffer.
Change-Id: I2b8f97beb50b4752674fc8b4034feb84d2a36302
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Add driver state information param to view from the user space.
Change-Id: I2d4cd86ae5d67ac948a93d28e24ea96394343513
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Disable retuning in function 1 driver by default. Created a sysfs
entry to enable it if needed.
Change-Id: I29b5ea4a8e0f1614b10226edb21c6cbeb7a327cd
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Ping with known good phase if last phase of tuning fails.
Change-Id: I3d8d8ce3d8a4dc00146668b815b69619d3a4cea8
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Update read write API to drop further messages during transport or
interface removal.
Change-Id: Ied43de8aa7cef1c36c9c520976357ba1e63017db
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Add API to dynamically add and remove the SDIO card on demand.
Change-Id: I946115880da75804a6636616d9cf7cfb4a682b92
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Add QCN SDIO core diver config into Makefile and
Kconfig to enable its compilation.
Change-Id: I19d184c628658175179d9b5c52a3a8bd07dd7999
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Add QCN SDIO client driver config into Makefile and
Kconfig to enable its compilation.
Change-Id: I40ffa1844b2030aca53d0e36f1bee2900a3ea8d4
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
This snapshot is taken as of msm-4.4 commit dc86ce0faa ("soc: qcom:
ipc_rtr_xprt: Add support to set version in transport").
Change-Id: I729d3c910372d2c3c0bbaaae74a42150c9929732
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Add support for SDIO transport in diag core framework.
Change-Id: Ic3ccfec3acd60b36a96aebb49a5681219a25e643
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Update code to support diag for peripheral devices over sdio bus.
Change-Id: I14678f301f94b239b61c4c94d3c0ff65204e739e
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
This commit is taken as of msm-4.4 commit f185067e36 ("diag: Fix
HSIC read complete work function").
Change-Id: I629fe0d9ed697fb20fd9263ecea6009157181e63
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Update the completion variable sequence to avoid multiple complete
call on a stale staack completion variable.
Change-Id: I582777431918c359cd10e4e072f33589dc600e62
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Add QCN bridge client driver to provide interface to QCN SDIO
core function-1 driver. This driver currently provides interfacing
for diag, IPC router and sahara application.
Change-Id: Ie992aec91347bb68e46a01ee6f67a1d07ce40ecc
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
Add synchronization support between clients that operate on different
modes, i.e. synchronous or asynchronous. The synchronous client will
momentarily switch to asynchronous if any asynchronous transmission is
scheduled.
Change-Id: I41aec9bff950d2816a9ce55017e118e8504be77a
Signed-off-by: Amandeep Singh <amansing@codeaurora.org>
