Update total number of temperature sensors (TSENS)
supported on controller 0. Remove support to read from
TSENS sensor 5 and 6.
Change-Id: I63e2a0a29f6bbe787fa10170c28569cf692d2807
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
tsens_get_hw_id_mapping() API is used by thermal
client to obtain the logical ID or HW ID mapping
for the available temperature sensors (TSENS)
controller with sensor ID details. Clients
currently query the driver on a per sensor basis.
The API update allows the clients to get the sensor
ID information at once for the available number
of sensors.
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Change-Id: Ibae066276b099ffb78c72a890a689f83e4df56a9
The wakeup variable keeps track of the 2 edge interrupts needed to detect
wakeup from deep sleep, when the second edge interrupt is detected the
wake byte is injected into the tty buffer.
On some boards due to noisy GPIO pins an interrupt is detected as soon as
the wakeup irq is enabled and before the variable is reset leading to
bogus wakeup bytes being injected into the serial buffer.
To protect against this, make sure the wakeup interrupt is enabled after
all the state variables are reset to protect against spurious wakeups.
Change-Id: I8002a67d8d9cb41709049ff34f35717f3dd0acd0
Acked-by: Yijiang Yuan <yijiangy@qti.qualcomm.com>
Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
Add support for audio over MI2S and AUX PCM interfaces
so that applications have flexibility to select MI2S/AUX
PCM interfaces in addition to Slimbus.
CRs-Fixed: 1047362 1047365
Change-Id: I48e6680b026391d8e77bbdcba4fb59ed90b13581
Signed-off-by: Kuirong Wang <kuirongw@codeaurora.org>
Fix possible NULL pointer dereference issue as strrchr() API can
return NULL if there is no port_num found as part of passed string.
Change-Id: I410e58361282f175e46b68cbfaf4824e386454f8
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Device state is updated incorrectly during codec probe when
the wsa881x soundwire slave device is in suspend state, resulting
in register read/write failures. Update the device state during
device probe instead of codec probe.
Change-Id: I46afe2a08495c2ed06806b0568b1c44a6ffd947f
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
The RBBM_ALWAYS_COUNT countable does not function properly
when top level clock gating is enabled. Return -EINVAL
when user requests this perfcounter.
CRs-Fixed: 1038778
Change-Id: I48d560ab2caa6ea467ac56bf0d323937a475cdde
Signed-off-by: Harshdeep Dhatt <hdhatt@codeaurora.org>
Add carve-outs, firmware regions and other cma areas as part of initial
memory map configuration for msmtriton.
Change-Id: If3f17a913aac8fb5959c919ae28973544e33444a
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Use div64_s64() instead of direct division required for 32-bit kernel
compilation.
CRs-Fixed: 1070141
Change-Id: I9f58a411c2a923c07fd27ab9dc5ac244e4b13a44
Signed-off-by: ansharma <ansharma@codeaurora.org>
Update regulator name and phandle for msmfalcon.
While at it, add buck-boost regulator.
CRs-Fixed: 1070486
Change-Id: Ia3c1beed20590e4135d58ad235ff861d47db5882
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Update the initial memory map details for the carveout memory regions
for msmfalcon.
Change-Id: I81b7992aa1117590400050c2da7dc7c9e3903572
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
During suspend, where there isn't a explicit timer requirement, suspend
driver adds a ~0ULL value to current timer value and passes it on to RPM as
the wakeup timer. However, RPM doesn't handle overflow of timer wakeups,
which could indicate that the master is requesting a wakeup in the past
and causes a crash.
Adding 1 to current wakeup times, sets the wakeup time to 0 for suspend
usecases. MPM maps a 0 wakeup time to ~0ULL which would be handled
correctly on the RPM side.
Change-Id: Ida24c83eb2f1ae94ad7168b6065db69da35c3ec9
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Girish S Ghongdemath <girishsg@codeaurora.org>
Convert Goodix driver to dev_pm_ops.
Add return type and parameters for suspend/resume for
Goodix driver.
Change-Id: I5243d9ab801f6964e675ad37c2161beda3586dfe
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
