CONFIG_RODATA allows strict kernel mapping permissions to
be followed and accordingly maps regions as read-only,
not-executable etc. correspondingly. CONFIG_RODATA however
assumes all memory regions to be SECTION_SIZE aligned and
section mapped for performance reasons.
With CONFIG_FORCE_PAGES, we force all kernel mappings as
page mapped thus breaking CONFIG_RODATA.
Provide provision to apply permissions at page (pte)
level, if CONFIG_RODATA does not find section mapping.
Change-Id: I8dbf5c3741836bc63a231d8a471cf0306662993b
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
sched_group_upmigrate tunable can accept values greater than
100%. Don't limit it to 100% while doing the auto adjustment.
Change-Id: I3d1c1e84f2f4dec688235feb1536b9261a3e808b
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
If disconnect happens before connect_work start executing, then
there is a chance that connect_work returns with port_usb NULL.
Due to this, port->is_connected will be NULL and disconnect_work
returns with this check, but not decremented pm_usage count, which
is incremented before scheduling connect_work in ipa_data_connect.
Hence fix this by decrementing pm_usage count in connect_work if
port_usb is NULL.
Change-Id: Ic60f2addcf07375429e0858d3c7a376a35132750
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Use NOM ACC settings up to TURBO voltage corner for APC0/1 for
sdm660.
CRs-Fixed: 2003900
Change-Id: Id1c82a7e1681e028d0426fe0565d88faa6588ab5
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
The highmem code provides kmap_flush_unused to ensure all kmap
mappings are really removed if they are unused. This code does not
handle kmap_atomic mappings since they are managed separately.
This prevents an issue for any code which relies on having absolutely
no mappings for a particular page. Rather than pay the penalty of
having CONFIG_DEBUG_HIGHMEM on all the time, add functionality
to remove the kmap_atomic mappings in a similar way to kmap_flush_unused.
Change-Id: Ieb25da809b377b1fae1629e2cb75f8aebc1c1bca
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Configure the size of the default CMA region to 32 MB in
DT for sdm630.
Configuring the default CMA region in the DT is cleaner
than using CONFIG_CMA_SIZE_MBYTES since it is easier to
configure per target and the alloc ranges can be specified
in DT.
Change-Id: I329ae0aa9cffeed7c30e44749c15fbb83c58b599
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
An spcom server that is waiting for request, but has no client connected,
will not get RX-ABORT or REMOTE-DISCONNECT notification,
that should cancel the server pending rx operation.
Change-Id: I52f69ac4bd0b53c60e2115761569d967bb77ea0e
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
This config is already enabled in all other variants but missed
in the 32 bit debug defconfig.
Change-Id: I7b1cb538eaf63305eba171c7453c1459c802eb41
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
If fw ready indication is not received prior
driver probe, core register will fail as fw interfaces
are not ready.
Return failure for insmod if fw ready indication is
not received by the driver.
Change-Id: I1953c60bda3df464b5f815bb66cc0d5da7aee037
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Power supply framework expects all registered power_supply
entities(except "battery" psy) to support ONLINE property.
"usb-main" psy doesn't support ONLINE property and prints
error for unsupported properties in get_property function.
Update error prints to debug in get-property function of
"usb-main" to prevent log flooding.
Change-Id: I270a93fe2e48d368f13e74e63c48613c1a4fb693
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
The sched_new_task_windows tunable is set to 5 in the scheduler
and it is not changed from user space. Remove this unused tunable.
Change-Id: I771e12b44876efe75ce87a90e4e9d69c22168b64
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Currently hardware based OTG soft start will fail when enabling OTG with
high capacitance.
Fix this by implementing a software based OTG soft start sequence in
addition to the underlying hardware OTG soft start.
This soft start workaround will begin when an OTG over-current interrupt
is triggered.
Change-Id: I2f3fd5f1bb6e792b2b353eb241d83548e33f563b
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The clock to the PM660 charger has to be configured in the
CHG_FREQ module instead of CHG_MISC. Also, the charger
frequencies for PM660 and PMI8998 are different, add
logic to handle that.
CRs-Fixed: 1104287
Change-Id: I5f4daf9354b209226a03b4f8026e20be8a73348b
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
commit 1eec2157d8 ("usb: dwc3: Update core clock rate based on
USB port speed.") only sets clk rate for HS/FS/LS device add notification.
In case super speed device is plugged in after LS/FS/HS device unplug in
absence of runtime suspend, core clk rate remains at high speed core clk
rate. Fix this issue by setting the core clk rate back to default when
a device is being removed from root hub.
Change-Id: I0ac37b7ff08a9a297441304eb2cfaff398d44bb9
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Add a mutex to prevent two threads from processing the same response
at the same time. This ensures responses are processed completely and
sequentially.
CRs-Fixed: 1116015
Change-Id: Id2ef32edb939f8af2850b54bd6f6f447939c0732
Signed-off-by: Siena Richard <sienar@codeaurora.org>
MCLK widget is not enabled during speaker protection VI feedback
path setup. Underflow errors are observed in VI path because of
missing MCLK. Fix this issue by adding MCLK widget routing to VI
feedback path.
Change-Id: I55623574c93be271723fe4a2a268f129719041fc
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
The threshold comparators should be set to "<=". Set them.
Change-Id: I45cf6dd7f165d20e2f2dbc6fce7fd321b4ac145a
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The temperature change IRQ is used to update the parallel power supply
when the temperature of the connector changes. Enable it.
Change-Id: I26582ffc2c98183c75f5c302386416e840bd6ed0
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The connector thermal regulation source must be enabled in order to
receive temperature-change interrupts. Enable it.
Change-Id: I9bb2d3eaf3bba1b1f40bfd724060f2fa437235b5
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Add a device tree property qcom,connector-temp-max-mdegc to configure
the connector temperature at which mitigation should start.
This will set the thresholds for when the temperature-change IRQ will
fire.
Change-Id: I47df477b56a6654fbf94b5bb0f7dfdfb80e2f16e
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Use the CONNECTOR_THERM_ZONE property to show the current thermal zone
of the USB connector temperature.
Change-Id: Ia9a85055d68ed08aa9be5b2b66e3e6389ec2e6c3
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The CONNECTOR_THERM_ZONE property shows which thermal zone the
connector temperature is currently in.
Change-Id: I669344feea13f34f98ee808cae5649766543201a
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The temperature change IRQ is used to notify the CTM driver that the
connector temperature has changed. Enable it.
Change-Id: Ibda88fcac6044c0f9a1db96be70b7e7f99e6fb73
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The charger temperature threshold should be configured for thermal
balancing. Add a device tree property to configure the temperature
threshold. A default value will be used in the absence of this property.
Change-Id: I5d64a8012a9c13c578714d91f1e7e4426cef235a
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The hardware conversion triggers are required for thermal regulation.
Enable them.
Change-Id: I4172f7ae8df437ba3a49e6abae587298bc11d78b
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The TADC hardware supports configuring temperature thresholds. Add
support for configuring these thresholds via the IIO framework.
Change-Id: Ib673965eb9b8265874580c8c26f72c85590151c2
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
In WCN3990, currently firmware gets loaded via non bmi procedure.
Since, firmware-5.bin file is not needed, this change skip parsing
and loading of the same.
CRs-Fixed: 2002151
Change-Id: I7e02349d73d333296b7beefa4c9cfc435de8f1a4
Signed-off-by: Rajeev Kumar Sirasanagandla <rsirasan@codeaurora.org>
Base address needs to be set for SAP interface
in HL 1.0 firmware. If base mac address has not
encoded in WLAN firmware board data file then auto
generate base mac address using device serial number
and user defined mac address.
Change-Id: I66f72c3c14b620107b48664d753c9dcf7a9b418e
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Add INT3 Tx port for LSM to support detections in
cases where this port is used.
Change-Id: Ifddd0dce0b62a352ee10fad9d11b2e83b2d5f902
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
Add TLB dump entries to setup memory space by the cpuss dump
driver to dump TLB entries.
Change-Id: I4193191d85e3839d0fb7e7d38fee4e938d55167b
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Update the nt35597 truly panel init sequence to reduce the
high latency issue seen across suspend resume cycles on
SDM660 target.
Change-Id: I0d71cebd5571fac293a8b0f401d882342fbd9106
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
The gcc_rx2_qlink_clkref_clk is not required by
any client, so remove controlling the clock from
HLOS clock driver.
Change-Id: I20dbb38f3f0fcbcdb3974923f4a0b540153d3fde
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Recovery can be initiated any time and can happen during driver
register also. With current implementation, if recovery starts
just before driver register then probe call back will not be
called as FW is not ready yet but probe call back will not be
called even after FW ready indication. Fix this case by calling
probe call back after FW ready if driver is registered but probe
call back is not called during driver register.
CRs-fixed: 2002797
Change-Id: Ia1ea812a1bac3204ad95a62b7c6e55511753f2db
Signed-off-by: Prashanth Bhatta <bhattap@codeaurora.org>
Update truly FHD panel init sequence to fix corruption
issues. Also enable dfps feature for the video mode panel
on SDM660 target with the updated sequence.
Change-Id: Ife010a0fccefad802877fd50f222587be36d24aa
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
GPU subsystem in sdm630 is supplied by either LDO300(VDD_GFX)
in LDO mode or VDD_CX in BHS mode. This LDO300 is CPR managed
and supports CPR closed-loop operation. Add CPR device node
with required configuration for supporting CPR closed-loop
operation for sdm630.
CRs-Fixed: 2000929
Change-Id: I9a07d9b00ed3830e5146b7b1debe84a9393fafd3
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Update GFX LDO CPR closed-loop target quotients as per silicon
characterization data and also update ro scaling factor values
for sdm660.
Also, change the supported Fmax from 800Mhz to 750Mhz in GFX LDO
CPR device node.
CRs-Fixed: 2001053
Change-Id: I032a4cd13490314b15b3abd289eb5ef541e18c56
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
