Fastreg is mandatory for signature, so if the
device doesn't support it we don't need to use it.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes a bug where outstanding RDMA_READs with WRITE_PENDING
status require an extra target_put_sess_cmd() in isert_put_cmd() code
when called from isert_cq_tx_comp_err() + isert_cq_drain_comp_llist()
context during session shutdown.
The extra kref PUT is required so that transport_generic_free_cmd()
invokes the last target_put_sess_cmd() -> target_release_cmd_kref(),
which will complete(&se_cmd->cmd_wait_comp) the outstanding se_cmd
descriptor with WRITE_PENDING status, and awake the completion in
target_wait_for_sess_cmds() to invoke TFO->release_cmd().
The bug was manifesting itself in target_wait_for_sess_cmds() where
a se_cmd descriptor with WRITE_PENDING status would end up sleeping
indefinately.
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Now that TASK_ABORTED status is not generated for all cases by
TMR ABORT_TASK + LUN_RESET, a new TFO->abort_task() caller is
necessary in order to give fabric drivers a chance to unmap
hardware / software resources before the se_cmd descriptor is
released via the normal TFO->release_cmd() codepath.
This patch adds TFO->aborted_task() in core_tmr_abort_task()
in place of the original transport_send_task_abort(), and
also updates all fabric drivers to implement this caller.
The fabric drivers that include changes to perform cleanup
via ->aborted_task() are:
- iscsi-target
- iser-target
- srpt
- tcm_qla2xxx
The fabric drivers that currently set ->aborted_task() to
NOPs are:
- loopback
- tcm_fc
- usb-gadget
- sbp-target
- vhost-scsi
For the latter five, there appears to be no additional cleanup
required before invoking TFO->release_cmd() to release the
se_cmd descriptor.
v2 changes:
- Move ->aborted_task() call into transport_cmd_finish_abort (Alex)
Cc: Alex Leung <amleung21@yahoo.com>
Cc: Mark Rustad <mark.d.rustad@intel.com>
Cc: Roland Dreier <roland@kernel.org>
Cc: Vu Pham <vu@mellanox.com>
Cc: Chris Boot <bootc@bootc.net>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Cc: Saurav Kashyap <saurav.kashyap@qlogic.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch addresses three of long standing issues wrt to Task
Aborted Status (TAS) handling.
The first is the incorrect assumption in core_tmr_handle_tas_abort()
that TASK_ABORTED status is sent for the task referenced by TMR
ABORT_TASK, and sending TASK_ABORTED status for TMR LUN_RESET on
the same nexus the LUN_RESET was received.
The second is to ensure the lun reference count is dropped within
transport_cmd_finish_abort() by calling transport_lun_remove_cmd()
before invoking transport_cmd_check_stop_to_fabric().
The last is to fix the delayed TAS handling to allow outstanding
WRITEs to complete before sending the TASK_ABORTED status. This
includes changing transport_check_aborted_status() to avoid
processing when SCF_SEND_DELAYED_TAS has not be set, and updating
transport_send_task_abort() to drop the SCF_SENT_DELAYED_TAS
check.
Signed-off-by: Alex Leung <amleung21@yahoo.com>
Cc: Alex Leung <amleung21@yahoo.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch changes isert_conn_create_fastreg_pool() to follow
logic in iscsi_target_locate_portal() for determining how many
FRMR descriptors to allocate based upon the number of possible
per-session command slots that are available.
This addresses an OOPs in isert_reg_rdma() where due to the
use of ISCSI_DEF_XMIT_CMDS_MAX could end up returning a bogus
fast_reg_descriptor when the number of active tags exceeded
the original hardcoded max.
Note this also includes moving isert_conn_create_fastreg_pool()
from isert_connect_request() to isert_put_login_tx() before
posting the final Login Response PDU in order to determine the
se_nacl->queue_depth (eg: number of tags) per session the target
will be enforcing.
v2 changes:
- Move isert_conn->conn_fr_pool list_head init into
isert_conn_request()
v3 changes:
- Drop unnecessary list_empty() check in isert_reg_rdma()
(Sagi)
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org> #3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
If during data-transfer a data-integrity error was detected we
must fail the command with CHECK_CONDITION and not execute
the command.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Remove code duplication from RDMA_READ and RDMA_WRITE
completions that do basically the same check.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
If protection is involved, iSER target must wait for
completion of RDMA_READ before sending SCSI response.
So we must consider that when calculating post_send_buf_count
additions, also when processing good/error completions.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
As REG_SIG_MR work request and it's LOCAL_INVALIDATE are
not accounted in post_send_buf_count we must color these
with ISER_FASTREG_LI_WRID in order to process their error
completions when the QP flushes.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch adds check for NopOUT->flag (LMB) which is a mandatory
as per RFC 3720 Section 10.18.
(Fix up context changes for v3.14-rc code - nab)
Signed-off-by: Arshad Hussain <arshad.hussain@calsoftinc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
In case the Target core passed transport T10 protection
operation:
1. Register data buffer (data memory region)
2. Register protection buffer if exsists (prot memory region)
3. Register signature region (signature memory region)
- use work request IB_WR_REG_SIG_MR
4. Execute RDMA
5. Upon RDMA completion check the signature status
- if succeeded send good SCSI response
- if failed send SCSI bad response with appropriate sense buffer
(Fix up compile error in isert_reg_sig_mr, and fix up incorrect
se_cmd->prot_type -> TARGET_PROT_NORMAL comparision - nab)
(Fix failed sector assignment in isert_completion_rdma_* - Sagi + nab)
(Fix enum assignements for protection type - Sagi)
(Fix devision on 32-bit in isert_completion_rdma_* - Sagi + Fengguang)
(Fix context change for v3.14-rc6 code - nab)
(Fix iscsit_build_rsp_pdu inc_statsn flag usage - nab)
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
In case of protected transactions, we will need to check the
protection status of the transaction before sending SCSI response.
So be ready for RDMA_WRITE completions. currently we don't ask
for these completions, but for T10-PI we will.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Introduce pi_context to hold relevant RDMA protection resources.
We eliminate data_key_valid boolean and replace it with indicators
container to indicate:
- Is the descriptor protected (registered via signature MR)
- Is the data_mr key valid (can spare LOCAL_INV WR)
- Is the prot_mr key valid (can spare LOCAL_INV WR)
- Is the sig_mr key valid (can spare LOCAL_INV WR)
Upon connection establishment check if network portal is T10-PI
enabled and allocate T10-PI resources if necessary, allocate
signature enabled memory regions and mark connection queue-pair
as signature enabled.
(Fix context change for v3.14-rc6 code - nab)
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
export map/unmap data buffer to a routine that may
be used in various places in the code and keep the
mapping data in a designated descriptor. Also, let
isert_fast_reg_mr to decide weather to use global
MR or do fast registration.
This commit does not change any functionality.
(Fix context change for v3.14-rc6 code - nab)
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
User may enable T10-PI support per network portal group. any connection
established on top of it, will be required to serve protected transactions.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
In case an iscsi portal group will be defined as t10_pi enabled,
all connections on top of it will support protected transactions.
T10-PI support may require extra reource allocation and maintenance by
the transport layer, so we don't want to apply them on non-t10_pi network
portals. This is a hook for the iscsi target layer to signal the transport
at connection establishment that this connection will carry protected
transactions.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This is not going to be supported soon - so drop it.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Some transports (iSCSI/iSER/SRP/FC) support hardware INSERT/STRIP
capabilities while other transports like loopback/vhost-scsi need
perform this is software.
This patch allows fabrics using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC
to signal the early LUN scan handling case where PROTECT CDB bits
are set, but no fabric buffer has been provided.
For transports which use generic new command these buffers have yet
to be allocated.
Also this way, target may support protection information
against legacy initiators (writes are inserted and reads
are stripped).
(Only set prot_pto for loopback during early special case - nab)
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
No need to actually compute protection information when formatting
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
If we remove a file that has inline data after mount, our statistics turns to
inaccurate.
cat /sys/kernel/debug/f2fs/status
- Inline_data Inode: 4294967295
Let's add stat_inc_inline_inode() to stat inline info of the file when lookup.
Change log from v1:
o stat in f2fs_lookup() instead of in do_read_inode() for excluding wrong stat.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Before setting the acl, call posix_acl_valid() to check if it is
valid or not.
Signed-off-by: zhangzhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The kbuild test robot reports the following build errors for x86_64-randconfig-c1-0407:
All error/warnings:
net/built-in.o: In function `wiphy_new':
>> (.text+0x7684c): undefined reference to `rfkill_alloc'
net/built-in.o: In function `wiphy_rfkill_start_polling':
>> (.text+0x76da4): undefined reference to `rfkill_resume_polling'
net/built-in.o: In function `wiphy_rfkill_stop_polling':
>> (.text+0x76de9): undefined reference to `rfkill_pause_polling'
net/built-in.o: In function `wiphy_unregister':
>> (.text+0x76ec9): undefined reference to `rfkill_unregister'
net/built-in.o: In function `wiphy_rfkill_set_hw_state':
>> (.text+0x771bc): undefined reference to `rfkill_set_hw_state'
net/built-in.o: In function `wiphy_register':
>> (.text+0x77968): undefined reference to `rfkill_register'
net/built-in.o: In function `wiphy_register':
>> (.text+0x77981): undefined reference to `rfkill_destroy'
net/built-in.o: In function `cfg80211_rfkill_sync_work':
>> core.c:(.text+0x788ad): undefined reference to `rfkill_blocked'
net/built-in.o: In function `cfg80211_dev_free':
>> (.text+0x78a7b): undefined reference to `rfkill_destroy'
net/built-in.o: In function `cfg80211_netdev_notifier_call':
>> core.c:(.text+0x79203): undefined reference to `rfkill_blocked'
net/built-in.o: In function `nl80211_start_p2p_device':
These undefined sysbols are all satisfied if a "select RFKILL" is added to
Kconfig. This "fix" leads to another problem as follows:
>> nl80211.c:(.text+0x9032e): undefined reference to `rfkill_blocked'
net/rfkill/Kconfig:4:error: recursive dependency detected!
net/rfkill/Kconfig:4: symbol RFKILL is selected by R8723AU
drivers/staging/rtl8723au/Kconfig:1: symbol R8723AU depends on USB
drivers/usb/Kconfig:41: symbol USB is selected by MOUSE_APPLETOUCH
drivers/input/mouse/Kconfig:162: symbol MOUSE_APPLETOUCH depends on INPUT
drivers/input/Kconfig:8: symbol INPUT is selected by ACPI_CMPC
drivers/platform/x86/Kconfig:635: symbol ACPI_CMPC depends on RFKILL
To avoid substituting one build error for another, I added a "depends on RFKILL".
My suspicion is that this particular error is caused by a kbuild bug, or that the
selection of INPUT by ACPI_CMPC is wrong. In any case, that will be solved separately.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Jes Sorensen <Jes.Sorensen@redhat.com>
Cc: kbuild-all@01.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some storage devices show relatively high latencies to complete cache_flush
commands, even though their normal IO speed is prettry much high. In such
the case, it needs to merge cache_flush commands as much as possible to avoid
issuing them redundantly.
So, this patch introduces a mount option, "-o flush_merge", to mitigate such
the overhead.
If this option is enabled by user, F2FS merges the cache_flush commands and then
issues just one cache_flush on behalf of them. Once the single command is
finished, F2FS sends a completion signal to all the pending threads.
Note that, this option can be used under a workload consisting of very intensive
concurrent fsync calls, while the storage handles cache_flush commands slowly.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Lets try this again. We can deadlock the box if we send on a box and try to
write onto the same fs with the app that is trying to listen to the send pipe.
This is because the writer could get stuck waiting for a transaction commit
which is being blocked by the send. So fix this by making sure looking at the
commit roots is always going to be consistent. We do this by keeping track of
which roots need to have their commit roots swapped during commit, and then
taking the commit_root_sem and swapping them all at once. Then make sure we
take a read lock on the commit_root_sem in cases where we search the commit root
to make sure we're always looking at a consistent view of the commit roots.
Previously we had problems with this because we would swap a fs tree commit root
and then swap the extent tree commit root independently which would cause the
backref walking code to screw up sometimes. With this patch we no longer
deadlock and pass all the weird send/receive corner cases. Thanks,
Reportedy-by: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
So I have an awful exercise script that will run snapshot, balance and
send/receive in parallel. This sometimes would crash spectacularly and when it
came back up the fs would be completely hosed. Turns out this is because of a
bad interaction of balance and send/receive. Send will hold onto its entire
path for the whole send, but its blocks could get relocated out from underneath
it, and because it doesn't old tree locks theres nothing to keep this from
happening. So it will go to read in a slot with an old transid, and we could
have re-allocated this block for something else and it could have a completely
different transid. But because we think it is invalid we clear uptodate and
re-read in the block. If we do this before we actually write out the new block
we could write back stale data to the fs, and boom we're screwed.
Now we definitely need to fix this disconnect between send and balance, but we
really really need to not allow ourselves to accidently read in stale data over
new data. So make sure we check if the extent buffer is not under io before
clearing uptodate, this will kick back EIO to the caller instead of reading in
stale data and keep us from corrupting the fs. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We could have possibly added an extent_op to the locked_ref while we dropped
locked_ref->lock, so check for this case as well and loop around. Otherwise we
could lose flag updates which would lead to extent tree corruption. Thanks,
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
This was done to allow NO_COW to continue to be NO_COW after relocation but it
is not right. When relocating we will convert blocks to FULL_BACKREF that we
relocate. We can leave some of these full backref blocks behind if they are not
cow'ed out during the relocation, like if we fail the relocation with ENOSPC and
then just drop the reloc tree. Then when we go to cow the block again we won't
lookup the extent flags because we won't think there has been a snapshot
recently which means we will do our normal ref drop thing instead of adding back
a tree ref and dropping the shared ref. This will cause btrfs_free_extent to
blow up because it can't find the ref we are trying to free. This was found
with my ref verifying tool. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
OPAL defines opal_msg as a big endian struct so we have to
byte swap it on little endian builds.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The firmware can notify us when new input data is available, so
let's make sure we wakeup the HVC thread in that case.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
opal_notifier_register() is missing a pending "unregister" variant
and should be exposed to modules.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Turn them on at the same time as we allow MSR_IR/DR in the paca
kernel MSR, ie, after the MMU has been setup enough to be able
to handle relocated access to the linear mapping.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
If we take an interrupt such as a trap caused by a BUG_ON before the
MMU has been setup, the interrupt handlers try to enable virutal mode
and cause a recursive crash, making the original problem very hard
to debug.
This fixes it by adjusting the "kernel_msr" value in the PACA so that
it only has MSR_IR and MSR_DR (translation for instruction and data)
set after the MMU has been initialized for the processor.
We may still not have a console yet but at least we don't get into
a recursive fault (and early debug console or memory dump via JTAG
of the kernel buffer *will* give us the proper error).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
All our cpu feature updates were done for every CPU in the device-tree,
thus overwriting the cputable bits over and over again. Instead do them
only for the boot CPU.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Move the definition to setup-common.c and set the init value
to -1 on both 32 and 64-bit (it was 0 on 64-bit).
Additionally add a check to prom.c to garantee that the init
value has been udpated after the DT scan.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
For historical reasons that code was under #ifdef CONFIG_PPC_PSERIES
but it applies equally to all 64-bit platforms.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
We can't take an IRQ when we're about to do a trechkpt as our GPR state is set
to user GPR values.
We've hit this when running some IBM Java stress tests in the lab resulting in
the following dump:
cpu 0x3f: Vector: 700 (Program Check) at [c000000007eb3d40]
pc: c000000000050074: restore_gprs+0xc0/0x148
lr: 00000000b52a8184
sp: ac57d360
msr: 8000000100201030
current = 0xc00000002c500000
paca = 0xc000000007dbfc00 softe: 0 irq_happened: 0x00
pid = 34535, comm = Pooled Thread #
R00 = 00000000b52a8184 R16 = 00000000b3e48fda
R01 = 00000000ac57d360 R17 = 00000000ade79bd8
R02 = 00000000ac586930 R18 = 000000000fac9bcc
R03 = 00000000ade60000 R19 = 00000000ac57f930
R04 = 00000000f6624918 R20 = 00000000ade79be8
R05 = 00000000f663f238 R21 = 00000000ac218a54
R06 = 0000000000000002 R22 = 000000000f956280
R07 = 0000000000000008 R23 = 000000000000007e
R08 = 000000000000000a R24 = 000000000000000c
R09 = 00000000b6e69160 R25 = 00000000b424cf00
R10 = 0000000000000181 R26 = 00000000f66256d4
R11 = 000000000f365ec0 R27 = 00000000b6fdcdd0
R12 = 00000000f66400f0 R28 = 0000000000000001
R13 = 00000000ada71900 R29 = 00000000ade5a300
R14 = 00000000ac2185a8 R30 = 00000000f663f238
R15 = 0000000000000004 R31 = 00000000f6624918
pc = c000000000050074 restore_gprs+0xc0/0x148
cfar= c00000000004fe28 dont_restore_vec+0x1c/0x1a4
lr = 00000000b52a8184
msr = 8000000100201030 cr = 24804888
ctr = 0000000000000000 xer = 0000000000000000 trap = 700
This moves tm_recheckpoint to a C function and moves the tm_restore_sprs into
that function. It then adds IRQ disabling over the trechkpt critical section.
It also sets the TEXASR FS in the signals code to ensure this is never set now
that we explictly write the TM sprs in tm_recheckpoint.
Signed-off-by: Michael Neuling <mikey@neuling.org>
cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The current kernel code assumes big endian and parses RTAS events all
wrong. The most visible effect is that we cannot honor EPOW events,
meaning, for example, we cannot shut down a guest properly from the
hypervisor.
This new patch is largely inspired by Nathan's work: we get rid of all
the bit fields in the RTAS event structures (even the unused ones, for
consistency). We also introduce endian safe accessors for the fields used
by the kernel (trivial rtas_error_type() accessor added for consistency).
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The emulated (CONFIG_MATH_EMULATION_FULL)
PowerPC Floating Point instruction mtfsf
does not correctly copy bits from its source
register to the Floating Point Status and Register (FPSCR).
The error is in the preparation of the mask used to
select the bits to be copied from the source to the FPSCR.
Execution of the mtfsf instruction does not produce the same
results on a MPC8548 platform (emulated floating point)
as on MPC7410 or 440EP platforms (hardware floating point).
This error has been detected using a Freescale MPC8548
based platform and the patch below tested using that platform.
The patch is based on the patch(es) provided by
Gabriel Paubert and analysis by Gabriel, James Yang and David Laight.
Signed-off-by: Stephen Chivers <schivers@csc.com>
Signed-off-by: Gabriel Paubert <paubert@iram.es>
Tested-by: Stephen Chivers <schivers@csc.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Recent arm64 builds using CONFIG_ARM64_64K_PAGES are failing with:
arch/arm64/kernel/perf_regs.c: In function ‘perf_reg_abi’:
arch/arm64/kernel/perf_regs.c:41:2: error: implicit declaration of function ‘is_compat_thread’
arch/arm64/kernel/perf_event.c:1398:2: error: unknown type name ‘compat_uptr_t’
This is due to some recent arm64 perf commits with compat support:
commit 23c7d70d55:
ARM64: perf: add support for frame pointer unwinding in compat mode
commit 2ee0d7fd36:
ARM64: perf: add support for perf registers API
Those patches make the arm64 kernel unbuildable if CONFIG_COMPAT is not
defined and CONFIG_ARM64_64K_PAGES depends on !CONFIG_COMPAT. This patch
allows the arm64 kernel to build with and without CONFIG_COMPAT.
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
During development, the driver first really needed to depend on
COMMON_CLK only. Later, it was switched to writel_relaxed, but it was
forgotten to update the dependencies, so build errors occured:
config: make ARCH=i386 allyesconfig
All error/warnings:
drivers/i2c/busses/i2c-cadence.c: In function 'cdns_i2c_clear_bus_hold':
>> drivers/i2c/busses/i2c-cadence.c:168:3: error: implicit declaration
>> of function 'writel_relaxed' [-Werror=implicit-function-declaration]
Use a very safe dependency for now.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Highlights include:
- Stable fix for a use after free issue in the NFSv4.1 open code
- Fix the SUNRPC bi-directional RPC code to account for TCP segmentation
- Optimise usage of readdirplus when confronted with 'ls -l' situations
- Soft mount bugfixes
- NFS over RDMA bugfixes
- NFSv4 close locking fixes
- Various NFSv4.x client state management optimisations
- Rename/unlink code cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=weNx
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- Stable fix for a use after free issue in the NFSv4.1 open code
- Fix the SUNRPC bi-directional RPC code to account for TCP segmentation
- Optimise usage of readdirplus when confronted with 'ls -l' situations
- Soft mount bugfixes
- NFS over RDMA bugfixes
- NFSv4 close locking fixes
- Various NFSv4.x client state management optimisations
- Rename/unlink code cleanups"
* tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits)
nfs: pass string length to pr_notice message about readdir loops
NFSv4: Fix a use-after-free problem in open()
SUNRPC: rpc_restart_call/rpc_restart_call_prepare should clear task->tk_status
SUNRPC: Don't let rpc_delay() clobber non-timeout errors
SUNRPC: Ensure call_connect_status() deals correctly with SOFTCONN tasks
SUNRPC: Ensure call_status() deals correctly with SOFTCONN tasks
NFSv4: Ensure we respect soft mount timeouts during trunking discovery
NFSv4: Schedule recovery if nfs40_walk_client_list() is interrupted
NFS: advertise only supported callback netids
SUNRPC: remove KERN_INFO from dprintk() call sites
SUNRPC: Fix large reads on NFS/RDMA
NFS: Clean up: revert increase in READDIR RPC buffer max size
SUNRPC: Ensure that call_bind times out correctly
SUNRPC: Ensure that call_connect times out correctly
nfs: emit a fsnotify_nameremove call in sillyrename codepath
nfs: remove synchronous rename code
nfs: convert nfs_rename to use async_rename infrastructure
nfs: make nfs_async_rename non-static
nfs: abstract out code needed to complete a sillyrename
NFSv4: Clear the open state flags if the new stateid does not match
...
The button mappings for the Fujitsu Lifebook T901 and T902 are quite different
from the generic Lifebook T mappings that are defined. This patch adds
mappings that are specific to the hardware on these machines, and allows
users to take advantage of features like screen rotation.
Signed-off-by: Scott K Logan <logans@cottsay.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
... so that one can know what this option is about without opening the
long help text.
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The only real change is passing in event_mask to the formerly nested functions.
Otherwise it's just moving around function and macro code.
This is the only place in the Linux kernel where nested functions are still in
use. Nested functions aren't part of the C standards, and complicate the
generated code. Although the Linux Kernel has never set out to be entirely C
standard compliant, it is increasingly compliant to the standard which is
supported by other compilers such as Clang. The LLVMLinux project is working on
being able to compile the Linux kernel with Clang. The use of nested functions
blocks this effort.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
CC: David Woodhouse <David.Woodhouse@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: ibm-acpi-devel@lists.sourceforge.net
CC: platform-driver-x86@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Dan Aloni has submitted a patch to set adaptive mode to function mode
when system resume back. Thanks Dan. :)
Following patch can make it to be restored to previous mode like What
Windows does.
Thanks,
Shuduo
>From 0ca960138518ceab23110141a0d7c0cafd54a859 Mon Sep 17 00:00:00 2001
From: Shuduo Sang <shuduo.sang@canonical.com>
Date: Thu, 27 Mar 2014 17:51:24 +0800
Subject: [PATCH] save and restore adaptive keyboard mode for suspend and
resume
The mode of adaptive keyboard on X1 Carbon need be saved first before
suspend then it can be restored after resume. Otherwise it will be
unusable.
Signed-off-by: Bruce Ma <bruce.ma@canonical.com>
Signed-off-by: Shuduo Sang <shuduo.sang@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Submit patch V4 to support Adaptive Keyboard on Thinkpad X1 Carbon 2nd
generation according to Tobias's comments.
Thanks,
Shuduo
>From b153a7b14791c6e01892c0e274e23eefd625fb8d Mon Sep 17 00:00:00 2001
From: Shuduo Sang <shuduo.sang@canonical.com>
Date: Mon, 3 Mar 2014 14:29:32 +0800
Subject: [PATCH] support thinkpad X1 Carbon's adaptive keyboard
Thinkpad X1 Carbon's adaptive keyboard has five modes including Home
mode, Web browser mode, Web conference mode, Function mode and Lay-flat
mode. We support Home mode and Function mode currently.
Signed-off-by: Bruce Ma <bruce.ma@canonical.com>
Signed-off-by: Shuduo Sang <shuduo.sang@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Given that some new features were added to the
driver, bump its version to 0.20 and add myself
to the copyright list for these new features
that were added.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
