Added basic support for CPU boost: when driver calls ops_bus_request
with a high bandwidth requirement, enable the big CPU cluster
and adjust the affinity of the wil6210 interrupt to run on
the first big core. The first big core is selected because
WLAN driver uses the other cores.
Change-Id: Ia752b9a8ca343b56e2839a30a4fdb59231f9a634
CRs-Fixed: 1114406
Signed-off-by: Lior David <liord@codeaurora.org>
To avoid buffer overflow, validate input length used to
set Dolby params.
Change-Id: I3f9d6040f118f63b60c20c83b0d8cae638f4a530
CRs-Fixed: 1095947
Signed-off-by: Sharad Sangle <assangle@codeaurora.org>
GPIO11 is used for home key on QRD sdm660 device.
Configure it to input/pull-up mode and add it to gpio-keys
device for key detection.
CRs-Fixed: 1115040
Change-Id: I7144a784c8cae4fbb026c4822b757ea76502bf7d
Signed-off-by: cyizhao <cyizhao@codeaurora.org>
It is needed to enable remote file system on modem processor, which
needs access to store data onto eMMC/UFS device.
The shared memory size used by modem and apps for this purpose is 2MB
on sdm630.
Change-Id: Ib41f8c542e10add6ec5d77632a104028e51e6b8c
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
PM660A supports LAB-IBB and OLEDB regulator while they are not
existing in PM660L. Add device nodes and enable them for PM660A.
Change-Id: I0210accea5e3a358830acf2235f72bad003d8144
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Correct the conditional check in the oledb_hw_init to avoid programming the
configuration registers if module is already enabled. Also correct the
conditional check in the oledb_regulator_disable.
CRs-Fixed: 1114628
Change-Id: I1af6c5ba6427050832ae04e693f161c517ef03a2
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Programming the default (1.5x) LAB_CURRENT_SENSE configuration is not
required for PM660A. Configure it only if explicitly specified in the
DT config.
CRs-Fixed: 1114628
Change-Id: Ib09e6430e99a7f39a9d2f837494a977daff354ba
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Currently usb function instance driver depends on diag char driver to
create the channel (using usb_diag_open api). Failing to create channel
can result in enumeration failure. Avoid this dependency by creating
diag channel from function instance if not available. Same channel
will be reused when diag char driver creates/opens the channel.
Change-Id: I11debd0189d81542762af22b3d203728d2266a42
Signed-off-by: Liangliang Lu <luliang@codeaurora.org>
Currently, the code reports whatever is in the BATTERY_CHARGING_STATUS_1
register for the battery status.
We have seen that the register continues to report FAST charging
even when the chg_ok pin could be low or dc path is in collapsed
state (collapsed state is treated as dc not online). This unexpected
report of charging while it is not really charging breaks certain
features.
Fix it by checking for usb_online and dc_online. But make sure that
if the battery is full it continues to report so.
Change-Id: I732c916b4f63f9ff0fd8d9c77ce5253c309698a4
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Add IRQ_AFFINITY_MANAGED flag and related kernel APIs so that
kernel driver can modify an irq's status in such a way that
user space affinity change will be ignored. Kernel space's
affinity setting will not be changed.
Change-Id: Ib2d5ea651263bff4317562af69079ad950c9e71e
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Drain WLAN_PROD pipe by sending a QMI to modem only in case
that the pipe is not empty. Also for SSR case, set a timeout
for QMI message response.
Change-Id: Iecd63a929b622d80ad4d4ebf15e8de9251f7d9d3
CRs-Fixed: 1113156
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Fix the HBR2 pattern generation by ensuring that the pattern
selection bit is not overwritten by a subsequent register write
that updates the scrambler reset count.
CRs-Fixed: 1108048
Change-Id: I2d2dcc79de82756eab015a343c24411a735947c9
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Interupts marked with this flag are excluded from user space interrupt
affinity changes. Contrary to the IRQ_NO_BALANCING flag, the kernel internal
affinity mechanism is not blocked.
This flag will be used for multi-queue device interrupts.
Change-Id: I204c49bb1c8ce87fbcd163119093163b120bfe83
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-block@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: axboe@fb.com
Cc: agordeev@redhat.com
Link: http://lkml.kernel.org/r/1467621574-8277-3-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Git-commit: 9c2555835bb3d34dfac52a0be943dcc4bedd650f
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[runminw@codeaurora.org: resolve trivial merge conflicts]
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Add a device tree node for CDSP loader, that is used for loading
CDSP image during boot.
Change-Id: I955ca3b89d36426a46554a62c11efb5fafb0e2c7
Acked-by: Himateja Reddy <hmreddy@qti.qualcomm.com>
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
This config is already enabled in perf defconfig but missed
in the debug defconfig.
Change-Id: I85ba0624318a0141fb8b6418e8e923201a108c55
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Enable CONFIG_MMC_RING_BUFFER to support ring buffer
logging of legacy and CQ events for sdm660.
Change-Id: I8ea62ea393cc7243b0652ca186cb914f9a7ea321
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
When debug_suspend is set to true and the low power code invokes the
function to print the enabled clocks during suspend the function fails to
execute the do while loop in clock_debug_print_enabled_clocks, so separate
out the function to handle the same.
Change-Id: I014750637bc17c1107c7f0745d2d44caf6c96e62
Signed-off-by: Taniya Das <tdas@codeaurora.org>
To fix access of unmapped memory region, add
lpi registers in pdata of node. This enables
unmapping when pdata is destroyed.
Change-Id: I62b2e50f8db39bdc430299a817ba621288ab4f3e
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Currently mac80211 does not inform the driver of the session
block ack timeout when starting a rx aggregation session.
Drivers that manage the reorder buffer need to know this
parameter.
Seeing that there are now too many arguments for the
drv_ampdu_action() function, wrap them inside a structure.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
Git-commit: 50ea05efaf3bed7dd34bcc2635a8b3f53bd0ccc1
[rsirasan@codeaurora.org: resolved conflicts in include/net/mac80211.h and
net/mac80211/agg-rx.c and not pulled changes for drivers/net/wireless/intel/ and
drivers/net/wireless/st/ since path is not maintained]
CRs-Fixed: 1112956
Change-Id: I15d86f60cd3bd33e392b313f7a4ee2fca91207d4
Signed-off-by: Rajeev Kumar Sirasanagandla <rsirasan@codeaurora.org>
SMD is being removed from defconfig of SDM660. All the references
to SMD like macros and header files are removed from fastrpc driver.
Change-Id: Iaa961e7faee4b59562fc92133c5154027c325f53
Acked-by: Vishnu Karthik <vikarthi@qti.qualcomm.com>
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
Using Debugfs virtual file system to make debug information available
to userspace. A directory called adsprpc is created in debugfs root
directory and a debugfs file is created in this directory for every
device open in the fastrpc driver.
Change-Id: Ie944424e30ddc810ff29116481d63b266c47c037
Acked-by: Vishnu Karthik <vikarthi@qti.qualcomm.com>
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
New stat param "num_qmb_int_handled" is added to rx_ch_stats
by IPA uC in WDI2.0. This results in a size mismatch and
WDI stats feature is broken. Make a change to update the
new param "num_qmb_int_handled" in rx_ch_stats structure.
Also make a change to read all the rx_ch_stats to avoid
printing stale values.
Change-Id: I5d141f531f1cfdab0bd0056041e22acb26657960
Acked-by: Chaitanya Pratapa <cpratapa@qti.qualcomm.com>
Signed-off-by: Utkarsh Saxena <usaxena@codeaurora.org>
Add nt35597 sharp video and command mode panel node to
sdm660 target.
Also enable NULL packet insertion for DSI controller
to avoid corruption seen with nt35597 sharp panel.
Change-Id: I42813cecd68059f835810cd015cd6654c3507dfa
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Add support to Enable/Disable uc monitor holb feature.
sdm660 does not support uc monitor holb feature.
Make changes to get this param via device tree to
support devices which handle holb monitoring via IPA uC.
sdm660 supports WLAN offload. Make changes to configure
wlan pipes on IPA2.6L needed to support WLAN offload.
Change-Id: I07e099ffb7833e4790dda1fd4864f3f61acb2a45
Acked-by: Mohammed Javid <mjavid@qti.qualcomm.com>
Signed-off-by: Utkarsh Saxena <usaxena@codeaurora.org>
