TZ is called to restore key configuration in case of UFS reset
Change-Id: Id434e7f9ec6befdce97f52fd350957b66adcb15f
Signed-off-by: Andrey Markovytch <andreym@codeaurora.org>
Null terminate cpr4_mmss_regulator_match_table with
'{}', to fix the error reported from KASAN.
Change-Id: Ib991fe5ce57e9e12132c3c836e1e807cb0afad22
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Add proper status flag in wcn3990 wlan module device node to
enable the ath10k SNOC platform driver probe for the APQ8998
target. The wcn3990 wlan module doesn't have any register
resource to request so remove invalid register base address
from the device node handle.
CRs-Fixed: 2003852
Change-Id: I554063ac8d8da3c4bbca29a2ba8e216323c7a9e0
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Slimbus is used as audio transport for Bluetooth & FM between sdm630 &
wcn3990. Add device tree entry for wcn3990 slimbus slave device in sdm630.
Change-Id: Ie5ee241e0a952b61e84682a289c69d10877cedd1
Signed-off-by: Rupesh Tatiya <rtatiya@codeaurora.org>
Enable CONFIG_FREE_PAGES_RDONLY for 32bit sdm660, that
marks freed kernel pages as read-only.
Change-Id: I532dc10fc6aee5200275550eb1df7d1e6cf195e9
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
CONFIG_FREE_PAGES_RDONLY, which marks freed kernel pages
as read-only missed the Kconfig and an interface to mark
pages as read-only for 32 bit system. Add them.
Change-Id: Ibb5020a44323fb50febd66e16ca448da8ecb352c
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
Align arm32 and arm64 sdm660 defconfig with respect to
iommu configs and remove cma size selection as it is to be
moved to device tree.
Change-Id: I5c5f88c05dce9f58d29d56d9cfea2b0d785d665a
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
CTS malloc tests on Android 'N' expects higher entropy in
mmap returned address. Present value of mmap random bits
is not providing enough variations for 32 bit tasks.
Increase mmap_rnd_bits for 32bit and mmap_rnd_compat_bits
for 64bit targets to value of 16.
Change-Id: I1cb88cb1f1fc2a8dc7e27eb54b8c0b2a3eb37843
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
CONFIG_RODATA allows strict kernel mapping permissions to
be followed and accordingly maps regions as read-only,
not-executable etc. correspondingly. CONFIG_RODATA however
assumes all memory regions to be SECTION_SIZE aligned and
section mapped for performance reasons.
With CONFIG_FORCE_PAGES, we force all kernel mappings as
page mapped thus breaking CONFIG_RODATA.
Provide provision to apply permissions at page (pte)
level, if CONFIG_RODATA does not find section mapping.
Change-Id: I8dbf5c3741836bc63a231d8a471cf0306662993b
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
sched_group_upmigrate tunable can accept values greater than
100%. Don't limit it to 100% while doing the auto adjustment.
Change-Id: I3d1c1e84f2f4dec688235feb1536b9261a3e808b
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
If disconnect happens before connect_work start executing, then
there is a chance that connect_work returns with port_usb NULL.
Due to this, port->is_connected will be NULL and disconnect_work
returns with this check, but not decremented pm_usage count, which
is incremented before scheduling connect_work in ipa_data_connect.
Hence fix this by decrementing pm_usage count in connect_work if
port_usb is NULL.
Change-Id: Ic60f2addcf07375429e0858d3c7a376a35132750
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Use NOM ACC settings up to TURBO voltage corner for APC0/1 for
sdm660.
CRs-Fixed: 2003900
Change-Id: Id1c82a7e1681e028d0426fe0565d88faa6588ab5
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
The highmem code provides kmap_flush_unused to ensure all kmap
mappings are really removed if they are unused. This code does not
handle kmap_atomic mappings since they are managed separately.
This prevents an issue for any code which relies on having absolutely
no mappings for a particular page. Rather than pay the penalty of
having CONFIG_DEBUG_HIGHMEM on all the time, add functionality
to remove the kmap_atomic mappings in a similar way to kmap_flush_unused.
Change-Id: Ieb25da809b377b1fae1629e2cb75f8aebc1c1bca
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Configure the size of the default CMA region to 32 MB in
DT for sdm630.
Configuring the default CMA region in the DT is cleaner
than using CONFIG_CMA_SIZE_MBYTES since it is easier to
configure per target and the alloc ranges can be specified
in DT.
Change-Id: I329ae0aa9cffeed7c30e44749c15fbb83c58b599
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
An spcom server that is waiting for request, but has no client connected,
will not get RX-ABORT or REMOTE-DISCONNECT notification,
that should cancel the server pending rx operation.
Change-Id: I52f69ac4bd0b53c60e2115761569d967bb77ea0e
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
This config is already enabled in all other variants but missed
in the 32 bit debug defconfig.
Change-Id: I7b1cb538eaf63305eba171c7453c1459c802eb41
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Power supply framework expects all registered power_supply
entities(except "battery" psy) to support ONLINE property.
"usb-main" psy doesn't support ONLINE property and prints
error for unsupported properties in get_property function.
Update error prints to debug in get-property function of
"usb-main" to prevent log flooding.
Change-Id: I270a93fe2e48d368f13e74e63c48613c1a4fb693
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
The sched_new_task_windows tunable is set to 5 in the scheduler
and it is not changed from user space. Remove this unused tunable.
Change-Id: I771e12b44876efe75ce87a90e4e9d69c22168b64
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Currently hardware based OTG soft start will fail when enabling OTG with
high capacitance.
Fix this by implementing a software based OTG soft start sequence in
addition to the underlying hardware OTG soft start.
This soft start workaround will begin when an OTG over-current interrupt
is triggered.
Change-Id: I2f3fd5f1bb6e792b2b353eb241d83548e33f563b
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The clock to the PM660 charger has to be configured in the
CHG_FREQ module instead of CHG_MISC. Also, the charger
frequencies for PM660 and PMI8998 are different, add
logic to handle that.
CRs-Fixed: 1104287
Change-Id: I5f4daf9354b209226a03b4f8026e20be8a73348b
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
commit 1eec2157d8 ("usb: dwc3: Update core clock rate based on
USB port speed.") only sets clk rate for HS/FS/LS device add notification.
In case super speed device is plugged in after LS/FS/HS device unplug in
absence of runtime suspend, core clk rate remains at high speed core clk
rate. Fix this issue by setting the core clk rate back to default when
a device is being removed from root hub.
Change-Id: I0ac37b7ff08a9a297441304eb2cfaff398d44bb9
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
MCLK widget is not enabled during speaker protection VI feedback
path setup. Underflow errors are observed in VI path because of
missing MCLK. Fix this issue by adding MCLK widget routing to VI
feedback path.
Change-Id: I55623574c93be271723fe4a2a268f129719041fc
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
The threshold comparators should be set to "<=". Set them.
Change-Id: I45cf6dd7f165d20e2f2dbc6fce7fd321b4ac145a
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The temperature change IRQ is used to update the parallel power supply
when the temperature of the connector changes. Enable it.
Change-Id: I26582ffc2c98183c75f5c302386416e840bd6ed0
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The connector thermal regulation source must be enabled in order to
receive temperature-change interrupts. Enable it.
Change-Id: I9bb2d3eaf3bba1b1f40bfd724060f2fa437235b5
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Add a device tree property qcom,connector-temp-max-mdegc to configure
the connector temperature at which mitigation should start.
This will set the thresholds for when the temperature-change IRQ will
fire.
Change-Id: I47df477b56a6654fbf94b5bb0f7dfdfb80e2f16e
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Use the CONNECTOR_THERM_ZONE property to show the current thermal zone
of the USB connector temperature.
Change-Id: Ia9a85055d68ed08aa9be5b2b66e3e6389ec2e6c3
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The CONNECTOR_THERM_ZONE property shows which thermal zone the
connector temperature is currently in.
Change-Id: I669344feea13f34f98ee808cae5649766543201a
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The temperature change IRQ is used to notify the CTM driver that the
connector temperature has changed. Enable it.
Change-Id: Ibda88fcac6044c0f9a1db96be70b7e7f99e6fb73
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The charger temperature threshold should be configured for thermal
balancing. Add a device tree property to configure the temperature
threshold. A default value will be used in the absence of this property.
Change-Id: I5d64a8012a9c13c578714d91f1e7e4426cef235a
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The hardware conversion triggers are required for thermal regulation.
Enable them.
Change-Id: I4172f7ae8df437ba3a49e6abae587298bc11d78b
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The TADC hardware supports configuring temperature thresholds. Add
support for configuring these thresholds via the IIO framework.
Change-Id: Ib673965eb9b8265874580c8c26f72c85590151c2
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
In WCN3990, currently firmware gets loaded via non bmi procedure.
Since, firmware-5.bin file is not needed, this change skip parsing
and loading of the same.
CRs-Fixed: 2002151
Change-Id: I7e02349d73d333296b7beefa4c9cfc435de8f1a4
Signed-off-by: Rajeev Kumar Sirasanagandla <rsirasan@codeaurora.org>
Base address needs to be set for SAP interface
in HL 1.0 firmware. If base mac address has not
encoded in WLAN firmware board data file then auto
generate base mac address using device serial number
and user defined mac address.
Change-Id: I66f72c3c14b620107b48664d753c9dcf7a9b418e
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Add TLB dump entries to setup memory space by the cpuss dump
driver to dump TLB entries.
Change-Id: I4193191d85e3839d0fb7e7d38fee4e938d55167b
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Update the nt35597 truly panel init sequence to reduce the
high latency issue seen across suspend resume cycles on
SDM660 target.
Change-Id: I0d71cebd5571fac293a8b0f401d882342fbd9106
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
