qmi_send_req_wait expects timeout argument to be passed in ms and not
in jiffies. Update the call in service-locator to pass in the correct
argument.
Change-Id: Ib2f8deedf2fb2a561c30b0c8511bb1edd5a37361
Signed-off-by: Kyle Yan <kyan@codeaurora.org>
ENOMSG is not a real failure return code for qmi_recv_msg. Instead ENOMSG
signifies that we have finished reading the entirety of the message buffer.
Update the error condition to print errors only when any error message
other than ENOMSG is returned.
Change-Id: Id6b42df182cb02f2cbffaae9698363b7dafce4e4
Signed-off-by: Kyle Yan <kyan@codeaurora.org>
Fix the programming of DisplayPort SDP registers primarily related
to Audio enable sequence. This would fix potential issues caused by
read/append/write operations on SDP registers which might corrupt
the parity/data bytes. This would lead to audio issues since the DP
controller would treat the corrupt SDP information as invalid data.
Change-Id: I55db6a70be0fdf94a60fd7cc8bf0d30702febef8
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
Issue:
When total_steps is updated, after that, copy_from_user
fails with an error, then, i2c_reg_tbl is not allocated.
In this case, when calling msm_actuator_parse_i2c_params,
it lead to out-of-bound memory write.
Fix:
1) Assign total_steps to zero when error from copying.
2) Add NULL pointer check for i2c tbl.
Change-Id: I4df8557719533900a5c571fc00f9844943c8f7b1
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
There can be use after free with multiple ioctl calls.
Add mutex lock when updating userspace power.
Change-Id: Ieae08d05478a462b19cf7f91b64267177eaebe84
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
ADV7481 driver is board-specific, and thus should be compiled
as a module. This is part of the kernel modularization requirement.
Change-Id: I38ab9efca34ac9f898c2b76843563d8f74c29320
Suggested-by: Resmi Rajendran <resmir@qti.qualcomm.com>
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
Reset ASRC after audio playback is completed to clear
the FIFO and avoid any noise being generated.
CRs-Fixed: 2129994
Change-Id: Ie45796e1bd68d5a8bd790490a65520358f26b811
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
Add kernel pointer restriction while printing the global
page table entries through the debugfs.
Change-Id: Ia2ef4243248ece477e3f679c0027379686670928
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
Add SLPI fw name property to support dynamic loading of SLPI
fw images based on the version info.
Change-Id: I31baf971106a7a076cf83bd72c4509d860b3e7cb
Signed-off-by: Ananda Kishore <kananda@codeaurora.org>
Add support for clients to notify SRM update
to HDCP 1.x driver.
Integrate the SRM validation check in the HDCP 1.x
authentication flow to check HDCP 1.x receiver/repeater
KSV against the SRM revoked list and fail the authentication
if the sink is found to be present in the list.
Change-Id: I6615122f785bde94cb746ec4df7ab63b9f878528
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
During linkdown pci host cannot save the config space
prior to suspending the link. If saved_state is null
recover rc config space using shadow recovery.
CRs-Fixed: 2141146
Change-Id: I6c6e817ae2c32d8040853fe22785040480aa76eb
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
Issue:
When total_steps is updated, after that, copy_from_user
fails with an error, then, i2c_reg_tbl is not allocated.
In this case, when calling msm_actuator_parse_i2c_params,
it lead to out-of-bound memory write.
Fix:
1) Assign total_steps to zero when error from copying.
2) Add NULL pointer check for i2c tbl.
CRs-Fixed: 2111672
Change-Id: Ib9dcb182356e2df8078c131edfd0791fa95a35e0
Signed-off-by: Haibin Liu <haibinl@codeaurora.org>
Add device tree entry needed to support eeprom on the
irs1645 sensor.
Change-Id: I88ad09c7da813e3b74d465392e8e40839d9c88a9
Signed-off-by: Vivek Iyer <viyer@codeaurora.org>
FW now reports SNR for RX management frames.
Drop probe responses with SNR lower than the configured threshold.
Change-Id: Ife1863b07aebe5cb6097420290c0c10b590c2da1
Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
snr_thresh sysfs can be used to set omni and direct SNR threshold for
connection.
Change-Id: I091a6b61a1a4cb98e0e8c0f70b2fff4d22486e61
Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
The dispatcher timer should be updated if preemption is not in
progress. This schedules the dispatcher work in case the command
does not make progress.
Change-Id: I9ef55b12d7a4f07a3c5bba650e37453bd8f86ce3
Signed-off-by: Lynus Vaz <lvaz@codeaurora.org>
ICE clock funciton masks the error code from
scm call. This might introduce unwanted issues
in device. Ensure to return proper error code
to storage frameworks.
Change-Id: Ibd7358c3b19d23d5995cf267f56ef3bacf166569
Signed-off-by: Neeraj Soni <neersoni@codeaurora.org>
Do not need to do HDMI PHY reset here, because will do
that when HDMI cable connected again in HDMI mode setting
function.
Change-Id: Ifae7c35f72a9008980c207e0806ab7aaa57dfe07
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Due to delay of ~3 sec between core reset response
and core init cmd, i2c send fails as NFC controller
goes to deep sleep state if its idle for ~1sec.
Delay caused due to logs in driver probe sequence.
Delay is added after every gpio state change to
ensure, modified value is taken into consideration
and unnecessary delays are removed.
Change-Id: I4c6e8f867f641d6648139206244d67bb556e0099
Signed-off-by: Gaurav Singhal <gsinghal@codeaurora.org>
