HLOS client send request to SP server and expect response within timeout.
if timeout expires, return ETIMEDOUT error, rather than a general error.
Change-Id: Ic7691848ff133196bf31294c010e98846de2c470
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
Dload type imem offset is corrected for SDM630, so that
correct imem address is updated.
Change-Id: Ibed79e05f528028b10e250e5a41047f2e4255add
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Dload type imem offset is corrected for SDM660, so that
correct imem address is updated.
Change-Id: Ic6f4ca6aef80003fe7547f473c515a3368cb555e
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Clients are not getting notification if qmi connection to locator has
not been established. As a result of this clients are waiting forever.
So to avoid this notifying the client in case of qmi connection fails
to service locator.
Change-Id: Id1625c18db812831860355e987a97789357dda13
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
SDM630 supports multiple GPU power level speed bins. This
change adds all supported GPU power levels speed bins.
Specific speed bin will be used based on efuse value.
Change-Id: I9cbc786c05c668b454effefa03578ecf98e66c5f
Signed-off-by: Deepak Kumar <dkumar@codeaurora.org>
A508 GPU has multiple frequency plan, for loading a
specific frequency plan add speed bin read capability
for A508 GPU.
Change-Id: I32a030bec438edc74f1e78bfb2ea86e7a3f60dab
Signed-off-by: Deepak Kumar <dkumar@codeaurora.org>
In HDMI non-pluggable case, it's supposed that there will
not be hotplug events, so ignore the HPD interrupt and do
not schedule the HPD work.
CRs-Fixed: 2010135
Change-Id: I72b9c3fb0f831ddab4be0545c37cd9189d4afa41
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Audio codec needs audio extension block data in EDID,
so add support for providing this information in ops
registered by the audio driver.
CRs-Fixed: 2010135
Change-Id: Ic1b389872171d5faade38d5ff484be065a9dc489
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
In HPD case the HDMI driver communicate with external display
module by specific notification and acknowledge interfaces.
Add this support to enable the communication.
CRs-Fixed: 2010135
Change-Id: I24ac1e0f0cb1e3946e2a53e4bf72bafbd84e4395
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Aggregation for frequency is not enabled all the time. The aggregated
load is attached to the most busy CPU only when the group load is above
a certain threshold. Print the aggregation status in sched_get_busy
trace event to make debugging and testing easier.
Change-Id: Icb916f362ea0fa8b5dc7d23cb384168d86159687
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Make ext_display a standalone module independent of
framebuffer driver, so that it could be shared by
various drivers such as framebuffer and KMS.
CRs-Fixed: 2010135
Change-Id: I336c556cbfbd66d3cb3467acaea038d5d3651f67
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Use audio codec callback to replace the existing sysfs
node which has permission issues. The usage is the same
as previous sysfs node as the input parameters are not
changed. There are 3 different flags could be passed
in: SET_ENABLE, ENABLE, and CONNECT.
CRs-Fixed: 2010135
Change-Id: Id526bd8a3d750f8da108bc42b1e3e8f680950f3b
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Register ext_disp and provide audio codec ops. This
enables HDMI audio functionality for DRM driver.
CRs-Fixed: 2010135
Change-Id: Ide661456ab42bf6a8f13359819e39317f439a255
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
