This snapshot is taken as of
msm-3.18 'commit 7e1165aac628 ("Merge drivers: iio: bmi160:
Enabled the buffering support for BMI160 Sensor")'
CRs-Fixed: 2035593
Change-Id: I2951e77f226062d82e84a26fce6ab932b9685223
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
Buffer overflow can occur if MBA firmware size exceeds 1MB.
So validate size before copying the firmware.
CRs-Fixed: 2001803
Change-Id: I070ddf85fbc47df072e7258369272366262ebf46
Signed-off-by: Kishor PK <kpbhat@codeaurora.org>
For some use cases, mdp clock source needs to be parked at a safe
frequency when it is disabled and force enabled in order to execute
a safe dynamic switch. Add support for the same by adding
non_local_children flag.
Change-Id: Idcbaef90fdfcb80e93b00c61a91e5eadaabfbf56
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
When SMMU stage1 is enabled, set IOVA base and end in geometry
attr to allow PCIe driver to map the GIC MSI address.
Change-Id: I7826a941823a6204143ea077a45c71b22316699b
Signed-off-by: Maya Erez <merez@codeaurora.org>
Minidump only collect parts of memory which are registered
to its table. So add lpm_debug buffer to Minidump table.
Change-Id: I8635542411a560a88530ffbbfe033cd48d3507dc
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Add Minidump support for clients to get minimum required data
at the time of system crash. The Minidump table resides in SMEM,
BOOT(SBL) will iterate the table entries and dumps out (to USB/Flash)
the data in address location.
Any client can register to this table with static or known addresses,
as currently Minidump doesn't support dumping of dynamic data structures.
To simplify post processing, we create an ELF header, where each entry in
the minidump table is a section in elf header.
If Memory dump table enabled, Dump all data entries registered with MDT.
Enable Minidump:
echo mini > /sys/kernel/dload/dload_mode
Change-Id: I0fc8d21aef71ded34a498426ee3d7f86b063a639
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
For branch clocks having aggr_sibling_rates flag as set, get_rate()
always returns the parents rate despite the branch clocks prepare
status. Fix the same by adding a check for branch prepare status
and aggr_sibling_rates flag value.
Change-Id: If0ba62e178f14bc5fd8ec6007a67538a9b97285b
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
This enables 128 bit matching in ip6tables to help
optimize cases where there is no match required.
This shows a rough improvement of 40Mbps in a UDPv6
downlink test using iperf.
CRs-Fixed: 2034577
Change-Id: I093069b17f21cfbbe60b2bd941f8e2dfef562401
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
iptables matching for ipv6 always has a mask if an address is
specified for match. Adding a check for mask prior to that
helps to improve performance as it avoids the masked comparison.
This is achieved by defining a new feature IP6_NF_IPTABLES_128
which allows to perform 128 bit arithmetic while matching.
CRs-Fixed: 2034577
Change-Id: I9ffd34e29d1b06ad74545d4751aa0e1ea06ded49
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
The 4k display variant of the 8998 MTP has a new device subtype.
Creating a new device tree file with the default panel set to
4k command mode to support this MTP variant.
Change-Id: I1f1eee1baf2bfb1f452e724b55536674a9d6d973
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
OLEDB driver needs to configure the PBS RAM sequence for
disabling the OLEDB pull down during the module disable.
Add it for PM660A.
Change-Id: I8a969125faa14b2011714ad5bd98a1f9a0f5b649
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
On SSR scenario disable statuses for modem producer pipes.
Since modem is not up these statuses are redundant and are
not read by any EE.
Change-Id: I6e7a475d74902f7c5d1b9083f9f7935d3ed2c7c9
CRs-Fixed: 2034903
Signed-off-by: Amir Levy <alevy@codeaurora.org>
OLEDB_SPARE_CTL register bit is set by the PBS during the display enable
and is used during the display suspend to trigger the PBS event.
Hence, move clearing of the OLEDB_SPARE_CTL register to regulator disable.
Also enable the force_pd_ctl only for DRAX-A revisions <=2.0.
Change-Id: I339cefc91f94f772bc4f84e85f2471e1a73e4aed
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Use safer version of strcpy i.e. strlcpy instead of
strncpy for NULL terminated strings.
Change-Id: I5e2800d1d539545744a1b1231e1d589a7c92797a
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
This fix checks the validity of memory device session's
process descriptor before issuing a signal to it while
subsystem restart is performed. This fix avoids accessing
of cleaned-up process descriptor's fields.
CRs-Fixed: 2034816
Change-Id: I2725d3348fbeb8290c887cccea4bca6d41c5b184
Signed-off-by: Gopikrishna Mogasati <gmogas@codeaurora.org>
Register a notifier callback for LAB_VREG_NOT_OK, which is triggered
by the LABIBB driver when short circuit(SC) is detected on the LAB
rail. Disable the OLEDB module upon receiving the LAB_VREG_NOT_OK
notification.
Change-Id: Ia3cc19d9a3c2f32acc413677a9ea4b3100464cd2
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
On certain PMICs, there is no short circuit (SC) detection available
in LAB module. Add support to detect it manually and disable LAB/IBB
module upon SC detection. In addition, notify it to OLEDB driver to
disable OLEDB module.
Change-Id: I2a9dc5b1ae8ece45c85b3992026c7f389fd4d135
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Restore default android binder domains. As 'binder,hwbinder,vndbinder'
is the default, this change enables vndbinder.
Change-Id: I48ce75fc6090ad3d9a5b66ca437acbde5a913751
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Add support to dump dsi debug bus registers to memory
or print in xlog. This will be helpful in analyzing HW
behavior more precisely while debugging DSI stability
issues.
Change-Id: I7735897d9f24ca06e15015cf0d277bfe800b35bf
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Invalid typecast in MAC address store sysfs entry method
causing device crash due to the buffer overflow.
To fix the above issue check the length of the userspace MAC
address before write. Update the datatype and parsing method
to store the userspace MAC address.
CRs-Fixed: 2034549
Change-Id: I0d4709c5b623c8333a99991c042552df1e7da923
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
IPAv2 hardware works with 32 bit addressing,
so allocate a kernel memory using GFP_DMA flag
which is processed by IPA hardware.
Add a error check for return of dma_map_single
using dma_mapping_error API.
Change-Id: I08e3eec8e9b2d81f945283a72338c0a8f23e2ac9
Acked-by: Mohammed Javid <mjavid@qti.qualcomm.com>
Signed-off-by: Utkarsh Saxena <usaxena@codeaurora.org>
In the current implementation DBA driver always assumes
the TV connected is supporting audio. However if the TV
connected is in DVI mode or it's EDID does not contain
any audio block then it will not support audio data.
Hence after parsing EDID, check if the connected TV has
support for audio and accordingly configure and send HPD
events to audio framework.
Change-Id: Id1d175b9c0c1c07bcb4447eeaa907a17c15df098
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Vishnuvardhan Prodduturi <vproddut@codeaurora.org>
