Create a blacklist for processors that should not load the acpi-cpufreq module.
The initial entry in the blacklist function is the Intel 0f68 processor. It's
specification update mentions errata AL30 which implies that cpufreq should not
run on this processor.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Remove an obsolete check that used to prevent there being more
than 2 low P-states. Now that low-to-low P-states changes are
enabled, it prevents otherwise workable configurations with
multiple low P-states.
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Tested-by: Krists Krilovs <pow@pow.za.net>
Signed-off-by: Dave Jones <davej@redhat.com>
This block is allocated with alloc_bootmem() and scanned by kmemleak but
the kernel direct mapping may no longer exist. This patch tells kmemleak
to ignore this memory hole. The dma32_bootmem_ptr in
dma32_reserve_bootmem() is also ignored.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Make it possible to access the all-register-setting/getting MSR
functions via the MSR driver. This is implemented as an ioctl() on
the standard MSR device node.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <petkovbb@gmail.com>
For some reason, the _safe MSR functions returned -EFAULT, not -EIO.
However, the only user which cares about the return code as anything
other than a boolean is the MSR driver, which wants -EIO. Change it
to -EIO across the board.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
fbd8b1819e turns off the bit for
/proc/cpuinfo. However, a proper/full fix would be to additionally
turn off the bit in the CPUID output so that future callers get
correct CPU features info.
Do that by basically reversing what the BIOS wrongfully does at boot.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1251705011-18636-3-git-send-email-petkovbb@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Switch them to native_{rd,wr}msr_safe_regs and remove
pv_cpu_ops.read_msr_amd.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
LKML-Reference: <1251705011-18636-2-git-send-email-petkovbb@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
native_{rdmsr,wrmsr}_safe_regs are two new interfaces which allow
presetting of a subset of eight x86 GPRs before executing the rd/wrmsr
instructions. This is needed at least on AMD K8 for accessing an erratum
workaround MSR.
Originally based on an idea by H. Peter Anvin.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
LKML-Reference: <1251705011-18636-1-git-send-email-petkovbb@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
boot_cpu_physical_apicid is a global variable and used as function
argument as well. Rename the function arguments to avoid confusion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The proposed Moorestown support patches use an extra feature flag
mechanism to make the ioapic work w/o an i8259. There is a much
simpler solution.
Most i8259 specific functions are already called dependend on the irq
number less than NR_IRQS_LEGACY. Replacing that constant by a
read_mostly variable which can be set to 0 by the platform setup code
allows us to achieve the same without any special feature flags.
That trivial change allows us to proceed with MRST w/o doing a full
blown overhaul of the ioapic code which would delay MRST unduly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Moorestown MID devices need to be detected early in the boot process
to setup and do not call x86_default_early_setup as there is no EBDA
region to reserve.
[ Copied the minimal code from Jacobs latest MRST series ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jacob Pan <jacob.jun.pan@intel.com>
x86 bootprotocol 2.07 has introduced hardware_subarch ID in the boot
parameters provided by FW. We use it to identify Moorestown platforms.
[ tglx: Cleanup and paravirt fix ]
Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Platforms like Moorestown require early setup and want to avoid the
call to reserve_ebda_region. The x86_init override is too late when
the MRST detection happens in setup_arch. Move the default i386
x86_init overrides and the call to reserve_ebda_region into a separate
function which is called as the default of a switch case depending on
the hardware_subarch id in boot params. This allows us to add a case
for MRST and let MRST have its own early setup function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We do not need the TSC before late_time_init. Move the tsc_init to the
late time init code so we can also utilize HPET for calibration (which
we claimed to do but never did except in some older kernel
version). This also helps Moorestown to calibrate the TSC with the
AHBT timer which needs to be initialized in late_time_init like HPET.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
TSC calibration is modified by the vmware hypervisor and paravirt by
separate means. Moorestown wants to add its own calibration routine as
well. So make calibrate_tsc a proper x86_init_ops function and
override it by paravirt or by the early setup of the vmware
hypervisor.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move the code where it's only user is. Also we need to look whether
this hardwired hackery might interfere with perfcounters.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The timer and timer irq setup code is identical in 32 and 64 bit. Make
it the same formatting as well. Also add the global variables under
the necessary ifdefs to both files.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
MCA_bus is constant 0 when CONFIG_MCA=n. So the compiler removes that
code w/o needing an extra #ifdef
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Let the compiler optimize the timer_ack magic away in the 32bit timer
interrupt and put the same code into time_64.c. It's optimized out for
CONFIG_X86_IO_APIC on 32bit and for 64bit because timer_ack is const 0
in both cases.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This is a left over of the old x86 sub arch support. Remove it and
open code it like we do in time_64.c
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The timer init code is convoluted with several quirks and the paravirt
timer chooser. Figuring out which code path is actually taken is not
for the faint hearted.
Move the numaq TSC quirk to tsc_pre_init x86_init_ops function and
replace the paravirt time chooser and the remaining x86 quirk with a
simple x86_init_ops function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
paravirt overrides the setup of the default apic timers as per cpu
timers. Moorestown needs to override that as well.
Move it to x86_init_ops setup and create a separate x86_cpuinit struct
which holds the function for the secondary evtl. hotplugabble CPUs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We really do not need two paravirt/x86_init_ops functions which are
called in two consecutive source lines. Move the only user of
post_allocator_init into the already existing pagetable_setup_done
function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Replace another obscure paravirt magic and move it to
x86_init_ops. Such a hook is also useful for embedded and special
hardware.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
ARCH_SETUP is a horrible leftover from the old arch/i386 mach support
code. It still has a lonely user in xen. Move it to x86_init_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
irq_init is overridden by x86_quirks and by paravirts. Unify the whole
mess and make it an unconditional x86_init_ops function which defaults
to the standard function and can be overridden by the early platform
code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Replace the quirk machinery by a x86_init_ops function which
defaults to the standard implementation. This is also a preparatory
patch for Moorestown support which needs to replace the default
init_ISA_irqs as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Replace the quirk machinery by a x86_init_ops function which defaults
to the standard implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since nmi, debug and int3 returns to irq_return inside common_interrupt,
probing this function will cause int3-loop, so it should be marked
as __kprobes.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20090827172325.8246.40000.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Allow to reenter probe on the post_handler of another probe on x86-64,
because x86-64 already allows reentering int3.
In that case, reentered probe just increases kp.nmissed and returns.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20090827172304.8246.4822.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Call BUG() when a probe have been hit on the way of kprobe processing
path, because that kind of probes are currently unrecoverable
(recovering it will cause an infinite loop and stack overflow).
The original code seems to assume that it's caused by an int3
which another subsystem inserted on out-of-line singlestep buffer if
the hitting probe is same as current probe. However, in that case,
int3-hitting-address is on the out-of-line buffer and should be
different from first (current) int3 address.
Thus, I decided to remove the code.
I also removes arch_disarm_kprobe() because it will involve other stuffs
in text_poke().
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20090827172258.8246.61889.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Since parse_early_param() may (e.g. for earlyprintk=dbgp)
involve calls to page table manipulation functions (here
set_fixmap_nocache()), NX hardware support must be determined
before calling that function (so that __supported_pte_mask gets
properly set up).
But the call after parse_early_param() can also not go away, as
that will honor eventual command line specified disabling of
the NX functionality.
( This will then just result in whatever mappings got
established during parse_early_param() having the NX bit set
despite it being disabled on the command line, but I think
that's tolerable).
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
LKML-Reference: <4A97F3BD02000078000121B9@vpn.id2.novell.com>
[ merged to x86/pat to resolve a conflict. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: the SFI (Simple Firmware Interface) feature in the ACPI
tree needs this cleanup, pull it into the APIC branch as
well so that there's no interactions.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/kernel/sfi.c serves the dual-purpose of supporting the
SFI core with arch specific code, as well as a home for the
arch-specific code that uses SFI.
analogous to ACPI, drivers/sfi/Kconfig is pulled in by arch/x86/Kconfig
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: x86@kernel.org
Some IO-APIC routines are ACPI specific now, but need to
be exposed when CONFIG_ACPI=n for the benefit of SFI.
Remove #ifdef ACPI around these routines:
io_apic_get_unique_id(int ioapic, int apic_id);
io_apic_get_version(int ioapic);
io_apic_get_redir_entries(int ioapic);
Move these routines from ACPI-specific boot.c to io_apic.c:
uniq_ioapic_id(u8 id)
mp_find_ioapic()
mp_find_ioapic_pin()
mp_register_ioapic()
Also, since uniq_ioapic_id() is now no longer static,
re-name it to io_apic_unique_id() for consistency
with the other public io_apic routines.
For simplicity, do not #ifdef the resulting code ACPI || SFI,
thought that could be done in the future if it is important
to optimize the !ACPI !SFI IO-APIC x86 kernel for size.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: x86@kernel.org
Martin Schwidefsky analyzed it:
To register a clocksource the clocksource_mutex is acquired and if
necessary timekeeping_notify is called to install the clocksource as
the timekeeper clock. timekeeping_notify uses stop_machine which needs
to take cpu_add_remove_lock mutex.
Starting a new cpu is done with the cpu_add_remove_lock mutex held.
native_cpu_up checks the tsc of the new cpu and if the tsc is no good
clocksource_change_rating is called. Which needs the clocksource_mutex
and the deadlock is complete.
The solution is to replace the TSC via the clocksource watchdog
mechanism. Mark the TSC as unstable and schedule the watchdog work so
it gets removed in the watchdog thread context.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: John Stultz <johnstul@us.ibm.com>
x86 arch support for remapping HPET MSI's by associating the HPET timer block
with the interrupt-remapping HW unit and setting up appropriate irq_chip
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Jay Fenlason <fenlason@redhat.com>
LKML-Reference: <20090804190729.630510000@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The mpc_apic_id setup is handled by a x86_quirk. Make it a
x86_init_ops function with a default implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
32bit and also the numaq code have special requirements on the
ioapic_id setup. Convert it to a x86_init_ops function and get rid
of the quirks and #ifdefs
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The x86 quirkification introduced an extra ugly hackery with a
variable pointer in the mpparse code. If the pointer is initialized
then it is dereferenced and the variable set to 0 or incremented.
Create a x86_init_ops function and let the affected numaq code
hold the function. Default init is a setup noop.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
memory_setup is overridden by x86_quirks and by paravirts with weak
functions and quirks. Unify the whole mess and make it an
unconditional x86_init_ops function which defaults to the standard
function and can be overridden by the early platform code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
reserve_ebda_region needs to be called befor start_kernel. Moorestown
needs to override it. Make it a x86_init_ops function and initialize
it with the default reserve_ebda_region.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
