Copy speaker configuration from active to inactive bank
and perform bank switch operation while speaker channels
are getting enabled or disabled. This will make sure that
soundwire banks are always in sync and allow independent
control of speaker channels.
CRs-fixed: 1007465
Change-Id: Ic1653194c22fa5669b1c04fd9630158633fb00a5
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
Request device ungroup of speaker channels for independent
disable. It is possible that stereo speaker channels can be
disabled one after other, so remove them from group otherwise
speaker can be left in enabled state.
CRs-fixed: 1007465
Change-Id: I358ab4edcb85ec65b064ca28368ad744f2d36870
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
Handle soundwire slave devices ungroup in master controller.
Set the group device id to 0 when soundwire slave devices
request ungroup for independent control.
CRs-fixed: 1007465
Change-Id: I4f1b39dac949aa3f6aa3abb12ff0310fb0e98d1c
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
Add soundwire API to remove the soundwire slave devices
from group so that the devices can be controlled
independently as required.
CRs-fixed: 1007465
Change-Id: Ibca3e33c0e85629ae5ce121e75526f4786d6408a
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
Add support for 48x2 frame structure in soundwire
so that when slave device data path is not enabled,
all control messaging will happen with 48x2 frame.
Soundwire slave devices send an explicit request to
enable data path which in turn change the frame
structure to 48x16.
CRs-fixed: 996586
Change-Id: Ia4329ac982eb2a29a2b925897cd87ca9711c30e3
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
Add in device tree info to enable flash LED.
CRs-fixed: 1015501
Change-Id: I0c6471549dfa7af435a5ce5f21a56caab1c4ea09
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
Signed-off-by: Chun Zhang <chunz@codeaurora.org>
If driver is registered before FW ready indication then bus error
observed because of powering off the hardware before calling
driver probe. Fix the issue by powering off only when driver is
not registered.
Also add top level reset after FW ready without which bus error
is observed.
CRs-fixed: 1015484
Change-Id: I26609c4011f10c1a9ee62b092050394e064ee2a2
Signed-off-by: Prashanth Bhatta <bhattap@codeaurora.org>
CONFIG_CPUSET sets affinity to cpu 0 without cgroup setting.
Due to this performance regressed.
CRs-Fixed: 1014436
Change-Id: Icf96a123b8d6e9c007198c2969d60e3707a57098
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
Enable energy aware driver for msmcortex targets to support energy aware
scheduler feature.
CRs-fixed: 1018108
Change-Id: I5745dbcbb946ee2f937d1e77a68a4e87bc85e08e
Signed-off-by: Archana Sathyakumar <asathyak@codeaurora.org>
This patch addresses kernel addresses leak by changing
the format specifier to adhere to the kptr_restrict system setting.
CRs-Fixed: 987013
Change-Id: I32649a26f54d96c56d80aa2a1bd5f5d9dd0dd9d3
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
Allow modem mba, modem pbl and err_ready timeouts to be disabled by
writing to starting of pil_imem region.
CRs-Fixed: 1015492
Change-Id: I786d8edcd89e3624ef05ffc9a6953a8f840bbac0
Signed-off-by: Puja Gupta <pujag@codeaurora.org>
Add DSP memory region node that allows for buffers
to be created to be shared with DSP.
Change-Id: Iffd95234813a5dcd8ab7ec07a4ff1d2c679bb26f
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
PCIe is not used or tested on RUMI or SIM for msmcobalt.
Thus, disable PCIe on these platforms.
Change-Id: I0682801c0893a1b1516033b2ec0b0e2ec2713fdd
Signed-off-by: Tony Truong <truong@codeaurora.org>
Add support for secure session that checks whether the
buffer being passed was allocated from a secure heap and
appropriately maps the buffers in the secure context bank.
Change-Id: If590f65d033e264c04f0ad782895b02765ff4f3d
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
Add device node for HW event driver. HW event driver can be used to
configure HW events on msmcobalt device.
Change-Id: I5e633e798a0655d783554538b83b4642ec428c8c
Signed-off-by: Shashank Mittal <mittals@codeaurora.org>
This register write allows to select the usb3 phy mode. It is
recommended to explicitly select the usb3 phy mode before
programming the phy init sequence.
Change-Id: I2cb648b976d72d2020357881768674241557c56b
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
qmp phy can run in display port mode or in usb3 mode.
It is recommended to explicitly select the usb3 phy
mode before programming the phy init sequence, since
TCSR_USB3_DP_PHYMODE register is commonly used to
select mode between display port driver as well as
ssphy driver.
Change-Id: I270596868762ccd4f2f2cc9b0daaca647a2bee88
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Video firmware will send a HFI_PIC_STRUCT field in sequence changed
event, which indicates whether the clip is interlaced or progressive.
If the color format is NV12 and the clip is interlaced, DPB mode
would be combined NV12 while the DPB mode is split i.e. DPB is in
UBWC and OPB is in NV12. Also combining the pic struct change and
bit depth change into a single event to the userspace.
CRs-fixed: 1017209
Change-Id: Ife71e31622a53d0ea4cc418d434998e710352e10
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
PCI-e devices on MSM systems need to have their stream IDs configured at
device add time, since they're not known at system design time and
therefore can't be placed in the device tree. Add the necessary calls
into the MSM PCI-e driver to obtain stream IDs for devices behind PCI-e
at device add time.
CRs-Fixed: 1012229
Change-Id: I3645a525c3ab5ef6d89eeaa99894542bd3aa261f
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Uncomment some code which got commented during kernel upgrade by mistake
CRs-Fixed: 1015492
Change-Id: Id46bff3b3803d1316ea769581c0f1b0e7fa41498
Signed-off-by: Puja Gupta <pujag@codeaurora.org>
Add slimbus 6 playback hostless and slimbus_6_rx back-end
dai-link to enable independent backend for different devices
during audio playback.
Change-Id: Idac26ac45f1177db96fc3fb5d4a5e2f837f86d1b
Signed-off-by: Kuirong Wang <kuirongw@codeaurora.org>
Add USB audio via ADSP support in the machine driver.
Change-Id: I9773555fb025a41afd27e078f6ef23a4d140128f
Signed-off-by: Kuirong Wang <kuirongw@codeaurora.org>
Fixup callback is added for dais which
do not follow the FE and BE convention
and is directly controlled by userspace
such as hostless dais. This will restrict
the hw_params based on what is supported by
hardware rather than blindly setting what
is given by userspace.
Change-Id: I401c70ab5de1df10363ec808cb68f72d8d74af96
Signed-off-by: Anish Kumar <kanish@codeaurora.org>
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
As per the hardware documentation, PON device in pmicobalt need
not have to be configured during any type of reset. Hence remove
the DT property "qcom,secondary-pon-reset" from pmicobalt PON
device.
CRs-Fixed: 1001210
Change-Id: Iaf46a2247e70e17ed0b0032038860bfa64e7f7c6
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Current list of domains in iommu-debug was only
maintained during attach/detach calls. But for
masters like graphics this won't account for all
the domains, as it allocates multiple different
domains but attaches only one domain at a time.
Add support for maintaining list of unattached
domains too by adding them to debug_attachments
list during domain alloc but keeping dev as NULL.
We would add entry in debugfs attachment directory
only on actual attach call.
Change-Id: Ifde043e5c39f356b4187a30cbdf020ee943618f1
Signed-off-by: Susheel Khiani <skhiani@codeaurora.org>
show_data messages for the value at the addresses
needs to printed in the continuation.
CRs-Fixed: 1010438
Change-Id: I41c48e090ec4c44aeccd0e8fbbcb814b55c0416d
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
While setting up route for a particular device, compare
stream name of CPU DAI and Backend DAI to find the correct
Backend DAI.
Change-Id: Ic3f7c0e5b2a1055e7fdf52c78ded797a9a126d03
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
New country XA is based on Japan. The channels 5170-5250 are marked
as PASSIVE.
CRs-Fixed: 990486
Change-Id: I6dad4ce061316680239b3f9c23e64b23a875eb75
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
USB GSI function driver uses usb_ipa_w work to queue different events
like EVT_CONNECTED, EVT_DISCONNECTED and more. ipa_event_handler()
uses those events as inputs to make necessary decision about performing
connect and disconnect with IPA driver. It is required that before USB
GSI driver calls ipa_usb_deinit_teth_prot(), it has invoked IPA
disconnect API ipa_usb_xdci_disconnect() if it has called
ipa_usb_xdci_connect() API. Current code is making sure that any
running usb_ipa_w work is being completed before calling
ipa_usb_deinit_teth_prot() but if work is not scheduled and pending,
ipa_usb_xdci_connect() is not called (i.e. later when usb_ipw_w work is
scheduled, EVT_DISCONNECTED is being processed but gsi_unbind() has
changed sm_state as STATE_UNINITIALIZED which results into no-ops.)
which results into USB and IPA driver go out of sync in terms of
expected state machine. Hence calling ipa_usb_init_teth_prot() on next
USB cable connect from gsi_bind_config() fails which results into no
USB GSI functionality. Fix this issue by using drain_workqueue() instead
of flush_workqueue() which makes sure that re-queue work is flushed.
CRs-Fixed: 1005018
Change-Id: I64ff559b85f901688a4abd0110ebb32a5317e34d
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Enable QPNP_POWER_ON device support for msmcobalt platform so
that the power-on/off reasons of PMIC PON devices can be
printed out during bootup. Also, based on the reset type, PON
devices needs to be configured as per the hardware documentation.
CRs-Fixed: 1001210
Change-Id: I3db5f233e7c182e330f5144b4ab0d0769abf4a8d
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
The defconfigs have gotten out of sync again. Sync them up.
CRs-Fixed: 1017606
Change-Id: I7d2ac7172396e5e08cde8ef156685222eb8941d8
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
This DT bindings header file snapshot is taken as of msm-3.18
'commit 0b20839e37187 ("Merge "slim-msm: Synchronize SSR callbacks"")'.
CRs-Fixed: 1001210
Change-Id: Ic132efb650d4e8de561c3d1f95a281afeef4ce42
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Updating SOC layer clock API to support both platform drivers and
i2c driver.
Change-Id: I3d4a2e5c778c23dd80644080fdad7512c5e71e33
Signed-off-by: Sureshnaidu Laveti <lsuresh@codeaurora.org>
While porting changes to 4.4, looks like some functionality lost
and causing below compilation issues if we try to enable ZRAM.
[1]
drivers/block/zram/zram_drv.c: In function 'zram_bvec_write':
drivers/block/zram/zram_drv.c:724:9: error: 'ALLOC_ERROR_LOG_RATE_MS' \
undeclared (first use in this function)
ALLOC_ERROR_LOG_RATE_MS))
^
drivers/block/zram/zram_drv.c:724:9: note: each undeclared identifier \
is reported only once for each function it appears in
drivers/block/zram/zram_drv.c: In function 'zram_add':
drivers/block/zram/zram_drv.c:1239:34: error: 'struct zram' has no \
member named 'queue'
__set_bit(QUEUE_FLAG_FAST, &zram->queue->queue_flags);
^
make[4]: *** [drivers/block/zram/zram_drv.o] Error 1
make[3]: *** [drivers/block/zram] Error 2
make[2]: *** [drivers/block] Error 2
make[1]: *** [drivers] Error 2
[2]
drivers/block/zram/zram_drv.c: In function 'zram_add':
drivers/block/zram/zram_drv.c:1241:34: error: 'struct zram' \
has no member named 'queue'
__set_bit(QUEUE_FLAG_FAST, &zram->queue->queue_flags);
^
make[4]: *** [drivers/block/zram/zram_drv.o] Error 1
make[3]: *** [drivers/block/zram] Error 2
make[2]: *** [drivers/block] Error 2
CRs-Fixed: 1013947
Change-Id: I4f7944069306ba92e1fd82625bc15c7fa3bcdb0c
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
Enable camera VFE, Pproc and jpeg nodes in dtsi.
CRs-Fixed: 1017151
Change-Id: I33b172ca712064dcc86a87ae413f868f8d7d4342
Signed-off-by: JinHee Kim <jinheek@codeaurora.org>
a malicious app can open a perf event with constraint_duplicate
bit set, disable the event, and close the fd. On closing the fd,
the perf_release() modification causes the kernel to clean up
the event as if it still were enabled, leading to the event
being removed from a list twice.
CRs-Fixed: 977563
Change-Id: I5fbec3722407d2f3d0ff0d9f7097c5889e31fd62
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
Type-C cable can be connected in two different orientations.
Connector orientation information is required to configure
super speed phy lane. Extcon driver provides this information
using EXTCON_USB_CC.
Change-Id: Ib2c86970b30cb575146438611a11fde17ab106e8
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
When SPM_CORE_RET_MAPPING is set to 1, cores in retention
are treated as inactive by the OSM. However, currently
this register is programmed to 0 when the flag to treat
cores in retention as inactive is specified. Fix this.
Change-Id: Ibc5df71ddd0cfdabf82d3c1e47efca0d88823a2f
CRs-Fixed: 1017123
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Currently USB GSI function driver increments USB gadget device's
pm usage count on set_alt() and decrements on USB bus suspend or
USB cable disconnect case. Current code is not decrementing this
usage count when sm_state is STATE_INITIALIZED and USB cable is
disconnected (i.e. event EVT_DISCONNECTED posted). Fix this issue
by decrementing USB gadget device's pm usage count by addding check
for event EVT_DISCONNECTED when sm_state is STATE_INITIALIZED.
CRs-Fixed: 1003242
Change-Id: I4d6c9ce254f4c4139313dfd33da6c8745f34a1d3
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
This change adds support for concurrent writeback in supported
targets. The client requests for concurrent writeback by
selecting the data point in output buffer flags.
Change-Id: Ic108ce94daef4f96d1fa27b4057e49c01b9e9b8e
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Ingrid Gallardo <ingridg@codeaurora.org>
Add programming the PLL_CAL_L_VAL register to the fabia PLL
set_rate sequence. This is required on MSMCOBALT v1 as a
workaround.
CRs-Fixed: 1016938
Change-Id: I298acf633228b2c565736bf7bfd446d96f4e1983
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
Currently we don't support having both CONFIG_DEBUG_RODATA
and CONFIG_FORCE_PAGES enabled at the same time.
Update the dependencies for CONFIG_FORCE_PAGES to enforce
this.
If there is a need for read only support with
CONFIG_FORCE_PAGES enabled then enable
CONFIG_KERNEL_TEXT_RDONLY instead of CONFIG_DEBUG_RODATA.
Change-Id: I9ee1732ed0673edc7272d32469d08133fba9637f
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Port support from 3.10 for retrying cma allocations
to 3.18 to help resolve cma allocation failures.
It was observed that CMA pages are sometimes getting
pinned down by BG processes scheduled out in their exit
path. Since BG processes have lower priority they end up
getting less time slice by scheduler there by consuming
more time to free up CMA pages.
Also when a process is being forked copy_one_pte
may create copy-on-write mappings, when this is done
the page _count and page _mapcount are each
incremented sequentially. If the process is context
switched out after incrementing the _count but before
incrementing the _mapcount then the page will appear
temporarily pinned.
So instead of failing to allocate and directly
returning an error on the CMA allocation path we do 2
retries, with sleeps, to give the system an opportunity
to unpin any pinned pages.
Change-Id: I022a9341f8ee44f281c7cb34769695843e97d684
Signed-off-by: Susheel Khiani <skhiani@codeaurora.org>
Signed-off-by: Liam Mark <lmark@codeaurora.org>
While force mapping regions as page, do not go for 1GB
block mapping.
Change-Id: I85ca7046626048acb7a138dc174dc40efbba4ac9
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
The provision to map 1GB block, gives a problem during
dma_contiguous_remap when it attempts to remaps the dma
buffers into 4K. During this attempt to remap dma buffers
it overwrites pgd mapping for 1G block, thus leaving an
unmapped hole.
Managing remapping of dma regions with 1G block mapping is
difficult hence avoid mapping 1G block and switch to
SECTION_SIZE mapping (2MB) when memory region overlaps
with dma buffers range.
Change-Id: I2aa4119b3aeb328a2b95cf22656d2ec36012716f
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
