Add Clock Domain support to the R-Car M1A Clock Pulse Generator (CPG)
driver using the generic PM Domain. This allows to power-manage the
module clocks of SoC devices that are part of the CPG/MSTP Clock Domain
using Runtime PM, or for system suspend/resume.
SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The PERST# line in am57x-evm is connected to a GPIO line and PERST# should
be driven high to indicate the clocks are stable (As per Figure 2-10: Power
Up of the PCIe CEM spec 3.0).
Add support to make GPIO drive PERST# line.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This driver will provide support for calls into the firmware that will
be used by other drivers like cpufreq and vc4.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This part just add necessary change to boot imx6ul.
Update clock and pinctrl for imx6ul
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add device IDs and references for Texas Instruments TPS544B20, TPS544B25,
TPS544C20, and TPS544C25 to the generic PMBus driver.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The HTML output works a little nicer that way.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The clocks and clock-names properties describe input clocks that may be
required for enablement of CAAM.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some palmas based chip variants do not have OTG based ID logic.
For these variants we rely on GPIO based USB ID detection.
These chips do have VBUS comparator for VBUS detection so we
continue to use the old way of detecting VBUS.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The "altr,modrst-offset" property represents the offset into the reset manager
that is the first register to be used by the driver to bring peripherals out
of reset.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
MAX20751 is a multiphase power controller with internal buck converter.
It uses VR12.0 to report the output voltage. This requires an explicit
driver, since the VR version can not be auto-detected.
The chip supports a manufacturer specific command to fine-tune the output
voltage. This command is not currently supported.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the IT8732F. This chip is pretty similar to IT8721F,
with the main difference being that the ADC LSB is 10.9 mV instead of
12 mV.
Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ADM1293 and ADM1294 are mostly compatible with other chips of the same
series, but have more configuration options. There are also some
differences in register details.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull input subsystem fixes from Dmitry Torokhov:
"Just small ALPS and Elan touchpads, and other driver fixups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elantech - add special check for fw_version 0x470f01 touchpad
Input: twl4030-vibra - fix ERROR: Bad of_node_put() warning
Input: alps - only Dell laptops have separate button bits for v2 dualpoint sticks
Input: axp20x-pek - add module alias
Input: turbografx - fix potential out of bound access
Fix typos in ABI documentation
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch adds an entry in ABI Documentation for the name attribute
issued when a trigger is created.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This is intended to help developers faster find their way
inside the Industrial I/O core and reduce time spent on IIO
drivers development.
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Acked-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Also known as the Asus Chromebook Flip.
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Here are some USB and PHY fixes for 4.2-rc6 that resolve some reported
issues.
All of these have been in the linux-next tree for a while, full details
on the patches are in the shortlog below.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlXFMe4ACgkQMUfUDdst+ykcxgCfbv91Efs37AUe7LDiIpaperpJ
wIMAn3xwaOsw8qrpcg3YGOaSggMhuuMC
=vwz8
-----END PGP SIGNATURE-----
Merge tag 'usb-4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB and PHY fixes for 4.2-rc6 that resolve some reported
issues.
All of these have been in the linux-next tree for a while, full
details on the patches are in the shortlog below"
* tag 'usb-4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
ARM: dts: dra7: Add syscon-pllreset syscon to SATA PHY
drivers/usb: Delete XHCI command timer if necessary
xhci: fix off by one error in TRB DMA address boundary check
usb: udc: core: add device_del() call to error pathway
phy: ti-pipe3: i783 workaround for SATA lockup after dpll unlock/relock
phy-sun4i-usb: Add missing EXPORT_SYMBOL_GPL for sun4i_usb_phy_set_squelch_detect
USB: sierra: add 1199:68AB device ID
usb: gadget: f_printer: actually limit the number of instances
usb: gadget: f_hid: actually limit the number of instances
usb: gadget: f_uac2: fix calculation of uac2->p_interval
usb: gadget: bdc: fix a driver crash on disconnect
usb: chipidea: ehci_init_driver is intended to call one time
USB: qcserial: Add support for Dell Wireless 5809e 4G Modem
USB: qcserial/option: make AT URCs work for Sierra Wireless MC7305/MC7355
Create the documentation for SM712. Mention all the supported modes and
how to use.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RTC needs an input clock, it is the slow clock. It is required as it
will not function without it.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The watchdog has an input clock, the slow clock. It is required as it will
not function without it.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The timer counters need the slow clock. It is required as they
will not function without it.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The system timer (at91rm9200), the reset controller and the shutdown
controller need an input clock. This is the slow clock and they will not
function without it.
Also fix the shutdown controller example.
Acked-By: Sebastian Reichel <sre@kernel.org>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Currently there is no general documentation on Keystone SoCs in the
Linux Documentation folder of the source tree. This patch adds some
essential documentation with links to help users of Keystone Linux and
also provide links to existing documents where necessary.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Ben Hutchings writes:
As part of the reproducible builds project, Jérémy Bobbio identified
several time-dependent and non-deterministic functions in the document
build process (htmldocs, mandocs targets). This patch series should fix
all of those.
I ended up reverting one patch that introduced problems.
This reverts commit b44158b170. This commit
introduced warnings and possibly inconsistent results into the doc build
process. The goal is good but it will need to be achieved another way.
Reported-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
A bunch of device tree patches that:
- Enable the OTG controller on some boards
- Various additions to the existing boards
- New boards: A33 Ippo Q8H, Iteaduino Plus,
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ebRO
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt
Allwinner Device Tree changes for 4.3
A bunch of device tree patches that:
- Enable the OTG controller on some boards
- Various additions to the existing boards
- New boards: A33 Ippo Q8H, Iteaduino Plus,
* tag 'sunxi-dt-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (35 commits)
ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseq
ARM: dts: sun5i: hsg-h702: Enable USB OTG controller
ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC
ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tablet
ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno
ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro
ARM: dts: sun4i: Enable USB DRC on A10 OLinuxIno Lime
ARM: sunxi: dt: Convert users to the PIO interrupts binding
ARM: dts: sun4i: Add Iteaduino Plus A10
ARM: dts: A10s-OLinuxIno: Add a node for axp152 pmic
ARM: dts: axp152: Add a dtsi file for the axp152 pmic
ARM: dts: sun6i: Enable otg controller on the cs908
ARM: dts: sun4i: Enable otg controller on the mini-x
ARM: dts: sun4i: Enable otg controller on the ba10-tvbox
ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes
devicetree: Add msi to the vendor-prefix list
ARM: sun8i: dts: Add Ippo-q8h v1.2 with A33
ARM: dts: sun8i: sina33: Enable USB hosts
ARM: dts: sun8i: Enable USB host on GA10H-A33 tablets
ARM: dts: sun8i: Enable USB DRC on GA10H-A33 tablets
...
Signed-off-by: Olof Johansson <olof@lixom.net>
The "cpus" node cannot be inside the "soc" node, while this
works for the CoreSight blocks, the early boot code will look
for "cpus" directly under the root node, so this is a hard
convention. So move the CPU nodes.
Augment the "reg" property to match what is actually in the
hardware: 0x300 and 0x301 respectively.
Then add an SMP enablement type to be used by the SMP init
code, "ste,dbx500-smp".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Changed the documentation to allow sprintf() when the buffer
provided by sysfs cannot be overflowed. Explicitly say
snprintf() must never be used in a show function to format
data to be returned to user space.
Change based on a discussion about the patch
st: convert DRIVER_ATTR macros to DRIVER_ATTR_RO
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shane Seymour <shane.seymour@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have the nvmem framework, we can consolidate the common
driver code. Move the driver to the framework, and hopefully, it will
fix the sysfs file creation race.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[srinivas.kandagatla: Moved to regmap based EEPROM framework]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds bindings for qfprom found in QCOM SOCs. QFPROM driver
is based on simple nvmem framework.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds bindings for simple nvmem framework which allows nvmem
consumers to talk to nvmem providers to get access to nvmem cell data.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[Maxime Ripard: intial version of eeprom framework]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'ctxid_val' array was used to store the value of ETM context ID comparator
which actually stores the process ID to be traced, so using 'ctxid_pid' as
its name instead make it easier to understand.
This patch also changes the ABI, it is normally not allowed, but
fortunately it is a testing ABI and very new for now. Nevertheless,
if you don't think it should be changed, we could always add an alias
for userspace.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'ctxid_val' array was used to store the value of ETM context ID comparator
which actually stores the process ID to be traced, so using 'ctxid_pid' as
its name instead make it easier to understand.
This patch also changes the ABI, it is normally not allowed, but
fortunately it is a testing ABI and very new for now. Nevertheless,
if you don't think it should be changed, we could always add an alias
for userspace.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As a prerequisite to exporting cpu_hotplug_enable/cpu_hotplug_disable
functions to modules we need to convert cpu_hotplug_disabled to a counter
to properly support disable -> disable -> enable call sequences. E.g.
after Hyper-V vmbus module (which is supposed to be the first user of
exported cpu_hotplug_enable/cpu_hotplug_disable) did cpu_hotplug_disable()
hibernate path calls disable_nonboot_cpus() and if we hit an error in
_cpu_down() enable_nonboot_cpus() will be called on the failure path (thus
making cpu_hotplug_disabled = 0 and leaving cpu hotplug in 'enabled'
state). Same problem is possible if more than 1 module use
cpu_hotplug_disable/cpu_hotplug_enable on their load/unload paths. When
one of these modules is been unloaded it is logical to leave cpu hotplug
in 'disabled' state.
To support the change we need to increse cpu_hotplug_disabled counter
in disable_nonboot_cpus() unconditionally as all users of
disable_nonboot_cpus() are supposed to do enable_nonboot_cpus() in case
an error was returned.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 4 sysfs files should be stable ABIs to the user space.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
*) Fix compiler error when sun4i usb phy driver is built as module
*) Fix SATA Lockup issue in dra7 SoC
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=j6wu
-----END PGP SIGNATURE-----
Merge tag 'phy-for-4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus
Kishon writes:
phy: for 4.2-rc6
*) Fix compiler error when sun4i usb phy driver is built as module
*) Fix SATA Lockup issue in dra7 SoC
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This adds documentation of device tree bindings for the
mxc rtc.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add Kconfig entries, header file changes and addition to the documentation.
The early debug infrastructure is also added for easy development.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
