[ Upstream commit df80cd9b28b9ebaa284a41df611dbf3a2d05ca74 ]
Now when peeling off an association to the sock in another netns, all
transports in this assoc are not to be rehashed and keep use the old
key in hashtable.
As a transport uses sk->net as the hash key to insert into hashtable,
it would miss removing these transports from hashtable due to the new
netns when closing the sock and all transports are being freeed, then
later an use-after-free issue could be caused when looking up an asoc
and dereferencing those transports.
This is a very old issue since very beginning, ChunYu found it with
syzkaller fuzz testing with this series:
socket$inet6_sctp()
bind$inet6()
sendto$inet6()
unshare(0x40000000)
getsockopt$inet_sctp6_SCTP_GET_ASSOC_ID_LIST()
getsockopt$inet_sctp6_SCTP_SOCKOPT_PEELOFF()
This patch is to block this call when peeling one assoc off from one
netns to another one, so that the netns of all transport would not
go out-sync with the key in hashtable.
Note that this patch didn't fix it by rehashing transports, as it's
difficult to handle the situation when the tuple is already in use
in the new netns. Besides, no one would like to peel off one assoc
to another netns, considering ipaddrs, ifaces, etc. are usually
different.
Reported-by: ChunYu Wang <chunwang@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0642840b8bb008528dbdf929cec9f65ac4231ad0 ]
The way people generally use netlink_dump is that they fill in the skb
as much as possible, breaking when nla_put returns an error. Then, they
get called again and start filling out the next skb, and again, and so
forth. The mechanism at work here is the ability for the iterative
dumping function to detect when the skb is filled up and not fill it
past the brim, waiting for a fresh skb for the rest of the data.
However, if the attributes are small and nicely packed, it is possible
that a dump callback function successfully fills in attributes until the
skb is of size 4080 (libmnl's default page-sized receive buffer size).
The dump function completes, satisfied, and then, if it happens to be
that this is actually the last skb, and no further ones are to be sent,
then netlink_dump will add on the NLMSG_DONE part:
nlh = nlmsg_put_answer(skb, cb, NLMSG_DONE, sizeof(len), NLM_F_MULTI);
It is very important that netlink_dump does this, of course. However, in
this example, that call to nlmsg_put_answer will fail, because the
previous filling by the dump function did not leave it enough room. And
how could it possibly have done so? All of the nla_put variety of
functions simply check to see if the skb has enough tailroom,
independent of the context it is in.
In order to keep the important assumptions of all netlink dump users, it
is therefore important to give them an skb that has this end part of the
tail already reserved, so that the call to nlmsg_put_answer does not
fail. Otherwise, library authors are forced to find some bizarre sized
receive buffer that has a large modulo relative to the common sizes of
messages received, which is ugly and buggy.
This patch thus saves the NLMSG_DONE for an additional message, for the
case that things are dangerously close to the brim. This requires
keeping track of the errno from ->dump() across calls.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 052d41c01b3a2e3371d66de569717353af489d63 ]
After refcnt reaches zero, vlan_vid_del() could free
dev->vlan_info via RCU:
RCU_INIT_POINTER(dev->vlan_info, NULL);
call_rcu(&vlan_info->rcu, vlan_info_rcu_free);
However, the pointer 'grp' still points to that memory
since it is set before vlan_vid_del():
vlan_info = rtnl_dereference(dev->vlan_info);
if (!vlan_info)
goto out;
grp = &vlan_info->grp;
Depends on when that RCU callback is scheduled, we could
trigger a use-after-free in vlan_group_for_each_dev()
right following this vlan_vid_del().
Fix it by moving vlan_vid_del() before setting grp. This
is also symmetric to the vlan_vid_add() we call in
vlan_device_event().
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Fixes: efc73f4bbc ("net: Fix memory leak - vlan_info struct")
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2b5ec1a5f9738ee7bf8f5ec0526e75e00362c48f ]
When run ipvs in two different network namespace at the same host, and one
ipvs transport network traffic to the other network namespace ipvs.
'ipvs_property' flag will make the second ipvs take no effect. So we should
clear 'ipvs_property' when SKB network namespace changed.
Fixes: 621e84d6f3 ("dev: introduce skb_scrub_packet()")
Signed-off-by: Ye Yin <hustcat@gmail.com>
Signed-off-by: Wei Zhou <chouryzhou@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3b11775033dc87c3d161996c54507b15ba26414a ]
Christoph Paasch sent a patch to address the following issue :
tcp_make_synack() is leaving some TCP private info in skb->cb[],
then send the packet by other means than tcp_transmit_skb()
tcp_transmit_skb() makes sure to clear skb->cb[] to not confuse
IPv4/IPV6 stacks, but we have no such cleanup for SYNACK.
tcp_make_synack() should not use tcp_init_nondata_skb() :
tcp_init_nondata_skb() really should be limited to skbs put in write/rtx
queues (the ones that are only sent via tcp_transmit_skb())
This patch fixes the issue and should even save few cpu cycles ;)
Fixes: 971f10eca1 ("tcp: better TCP_SKB_CB layout to reduce cache line misses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove 160 MHz band-width support for VN as per master sheet
CRs-Fixed: 2145374
Change-Id: Id0cda10bf3343bccda5eea08ae5369754bb40edb
Signed-off-by: Rajeev Kumar Sirasanagandla <rsirasan@codeaurora.org>
DFS requirement for ETSI domain (section 4.7.1.4 in
ETSI EN 301 893 V1.8.1) is the only one which explicitly
states that once DFS channel is marked as available afer
the CAC, this channel will remain in available state even
moving to a different operating channel. But the same is
not explicitly stated in FCC DFS requirement. Also, Pre-CAC
requriements are not explicitly mentioned in FCC requirement.
Current implementation in keeping DFS channel in available
state is same as described in ETSI domain.
For non-ETSI DFS domain, this patch gives a grace period of 2 seconds
since the completion of successful CAC before moving the channel's
DFS state to 'usable' from 'available' state. The same grace period
is checked against the channel's dfs_state_entered timestamp while
deciding if a DFS channel is available for operation. There is a new
radar event, NL80211_RADAR_PRE_CAC_EXPIRED, reported when DFS channel
is moved from available to usable state after the grace period. Also
make sure the DFS channel state is reset to usable once the beaconing
operation on that channel is brought down (like stop_ap, leave_ibss
and leave_mesh) in non-ETSI domain.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
Git-commit: b35a51c7dd25a823767969e3089542d7478777e9
[svishnoi@codeaurora.org: removed NaN interface type from switch case in net/wireless/chan.c
as NaN interface is not supported]
Change-Id: Iba19513d1e40fe5da129d6251212c33d1361fec3
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Pass wowlan configuration data as parameter in the rdev
suspend. The userspace wlan utility (iw, wpa_supplicant etc.)
configured the wow pattern and event through nl80211 cmd.
During the wlan system suspend the wlan device configured the
wakeup source and event as per the configuration data passed
by the wlan utility to wkae up the device from the sleep state
on wow pattern or event match.
CRs-Fixed: 2147919
Change-Id: Iaca21724e8dd5a9c18e104c44ee6fe73752594e6
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=AafR
-----END PGP SIGNATURE-----
Merge 4.4.100 into android-4.4
Changes in 4.4.100
media: imon: Fix null-ptr-deref in imon_probe
media: dib0700: fix invalid dvb_detach argument
ext4: fix data exposure after a crash
KVM: x86: fix singlestepping over syscall
bpf: don't let ldimm64 leak map addresses on unprivileged
xen-blkback: don't leak stack data via response ring
sctp: do not peel off an assoc from one netns to another one
net: cdc_ether: fix divide by 0 on bad descriptors
net: qmi_wwan: fix divide by 0 on bad descriptors
arm: crypto: reduce priority of bit-sliced AES cipher
Bluetooth: btusb: fix QCA Rome suspend/resume
dmaengine: dmatest: warn user when dma test times out
extcon: palmas: Check the parent instance to prevent the NULL
fm10k: request reset when mbx->state changes
ARM: dts: Fix compatible for ti81xx uarts for 8250
ARM: dts: Fix am335x and dm814x scm syscon to probe children
ARM: OMAP2+: Fix init for multiple quirks for the same SoC
ARM: dts: Fix omap3 off mode pull defines
ata: ATA_BMDMA should depend on HAS_DMA
ata: SATA_HIGHBANK should depend on HAS_DMA
ata: SATA_MV should depend on HAS_DMA
drm/sti: sti_vtg: Handle return NULL error from devm_ioremap_nocache
igb: reset the PHY before reading the PHY ID
igb: close/suspend race in netif_device_detach
igb: Fix hw_dbg logging in igb_update_flash_i210
scsi: ufs-qcom: Fix module autoload
scsi: ufs: add capability to keep auto bkops always enabled
staging: rtl8188eu: fix incorrect ERROR tags from logs
scsi: lpfc: Add missing memory barrier
scsi: lpfc: FCoE VPort enable-disable does not bring up the VPort
scsi: lpfc: Correct host name in symbolic_name field
scsi: lpfc: Correct issue leading to oops during link reset
scsi: lpfc: Clear the VendorVersion in the PLOGI/PLOGI ACC payload
ALSA: vx: Don't try to update capture stream before running
ALSA: vx: Fix possible transfer overflow
backlight: lcd: Fix race condition during register
backlight: adp5520: Fix error handling in adp5520_bl_probe()
gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomap
ALSA: hda/realtek - Add new codec ID ALC299
arm64: dts: NS2: reserve memory for Nitro firmware
ixgbe: fix AER error handling
ixgbe: handle close/suspend race with netif_device_detach/present
ixgbe: Reduce I2C retry count on X550 devices
ixgbe: add mask for 64 RSS queues
ixgbe: do not disable FEC from the driver
staging: rtl8712: fixed little endian problem
MIPS: End asm function prologue macros with .insn
mm: add PHYS_PFN, use it in __phys_to_pfn()
MIPS: init: Ensure bootmem does not corrupt reserved memory
MIPS: init: Ensure reserved memory regions are not added to bootmem
MIPS: Netlogic: Exclude netlogic,xlp-pic code from XLR builds
Revert "crypto: xts - Add ECB dependency"
Revert "uapi: fix linux/rds.h userspace compilation errors"
uapi: fix linux/rds.h userspace compilation error
uapi: fix linux/rds.h userspace compilation errors
USB: usbfs: compute urb->actual_length for isochronous
USB: Add delay-init quirk for Corsair K70 LUX keyboards
USB: serial: qcserial: add pid/vid for Sierra Wireless EM7355 fw update
USB: serial: garmin_gps: fix I/O after failed probe and remove
USB: serial: garmin_gps: fix memory leak on probe errors
Linux 4.4.100
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit df80cd9b28b9ebaa284a41df611dbf3a2d05ca74 upstream.
Now when peeling off an association to the sock in another netns, all
transports in this assoc are not to be rehashed and keep use the old
key in hashtable.
As a transport uses sk->net as the hash key to insert into hashtable,
it would miss removing these transports from hashtable due to the new
netns when closing the sock and all transports are being freeed, then
later an use-after-free issue could be caused when looking up an asoc
and dereferencing those transports.
This is a very old issue since very beginning, ChunYu found it with
syzkaller fuzz testing with this series:
socket$inet6_sctp()
bind$inet6()
sendto$inet6()
unshare(0x40000000)
getsockopt$inet_sctp6_SCTP_GET_ASSOC_ID_LIST()
getsockopt$inet_sctp6_SCTP_SOCKOPT_PEELOFF()
This patch is to block this call when peeling one assoc off from one
netns to another one, so that the netns of all transport would not
go out-sync with the key in hashtable.
Note that this patch didn't fix it by rehashing transports, as it's
difficult to handle the situation when the tuple is already in use
in the new netns. Besides, no one would like to peel off one assoc
to another netns, considering ipaddrs, ifaces, etc. are usually
different.
Reported-by: ChunYu Wang <chunwang@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=ql4j
-----END PGP SIGNATURE-----
Merge 4.4.99 into android-4.4
Changes in 4.4.99
mac80211: accept key reinstall without changing anything
mac80211: use constant time comparison with keys
mac80211: don't compare TKIP TX MIC key in reinstall prevention
usb: usbtest: fix NULL pointer dereference
Input: ims-psu - check if CDC union descriptor is sane
ALSA: seq: Cancel pending autoload work at unbinding device
tun/tap: sanitize TUNSETSNDBUF input
tcp: fix tcp_mtu_probe() vs highest_sack
l2tp: check ps->sock before running pppol2tp_session_ioctl()
tun: call dev_get_valid_name() before register_netdevice()
sctp: add the missing sock_owned_by_user check in sctp_icmp_redirect
packet: avoid panic in packet_getsockopt()
ipv6: flowlabel: do not leave opt->tot_len with garbage
net/unix: don't show information about sockets from other namespaces
ip6_gre: only increase err_count for some certain type icmpv6 in ip6gre_err
tun: allow positive return values on dev_get_valid_name() call
sctp: reset owner sk for data chunks on out queues when migrating a sock
ppp: fix race in ppp device destruction
ipip: only increase err_count for some certain type icmp in ipip_err
tcp/dccp: fix ireq->opt races
tcp/dccp: fix lockdep splat in inet_csk_route_req()
tcp/dccp: fix other lockdep splats accessing ireq_opt
security/keys: add CONFIG_KEYS_COMPAT to Kconfig
tipc: fix link attribute propagation bug
brcmfmac: remove setting IBSS mode when stopping AP
target/iscsi: Fix iSCSI task reassignment handling
target: Fix node_acl demo-mode + uncached dynamic shutdown regression
misc: panel: properly restore atomic counter on error path
Linux 4.4.99
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit d01332f1acacc0cb43a61f4244dd2b846d4cd585 upstream.
Changing certain link attributes (link tolerance and link priority)
from the TIPC management tool is supposed to automatically take
effect at both endpoints of the affected link.
Currently the media address is not instantiated for the link and is
used uninstantiated when crafting protocol messages designated for the
peer endpoint. This means that changing a link property currently
results in the property being changed on the local machine but the
protocol message designated for the peer gets lost. Resulting in
property discrepancy between the endpoints.
In this patch we resolve this by using the media address from the
link entry and using the bearer transmit function to send it. Hence,
we can now eliminate the redundant function tipc_link_prot_xmit() and
the redundant field tipc_link::media_addr.
Fixes: 2af5ae372a (tipc: clean up unused code and structures)
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Reported-by: Jason Hu <huzhijiang@gmail.com>
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[backported to 4.4 by Tommi Rantala]
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 06f877d613be3621604c2520ec0351d9fbdca15f ]
In my first attempt to fix the lockdep splat, I forgot we could
enter inet_csk_route_req() with a freshly allocated request socket,
for which refcount has not yet been elevated, due to complex
SLAB_TYPESAFE_BY_RCU rules.
We either are in rcu_read_lock() section _or_ we own a refcount on the
request.
Correct RCU verb to use here is rcu_dereference_check(), although it is
not possible to prove we actually own a reference on a shared
refcount :/
In v2, I added ireq_opt_deref() helper and use in three places, to fix other
possible splats.
[ 49.844590] lockdep_rcu_suspicious+0xea/0xf3
[ 49.846487] inet_csk_route_req+0x53/0x14d
[ 49.848334] tcp_v4_route_req+0xe/0x10
[ 49.850174] tcp_conn_request+0x31c/0x6a0
[ 49.851992] ? __lock_acquire+0x614/0x822
[ 49.854015] tcp_v4_conn_request+0x5a/0x79
[ 49.855957] ? tcp_v4_conn_request+0x5a/0x79
[ 49.858052] tcp_rcv_state_process+0x98/0xdcc
[ 49.859990] ? sk_filter_trim_cap+0x2f6/0x307
[ 49.862085] tcp_v4_do_rcv+0xfc/0x145
[ 49.864055] ? tcp_v4_do_rcv+0xfc/0x145
[ 49.866173] tcp_v4_rcv+0x5ab/0xaf9
[ 49.868029] ip_local_deliver_finish+0x1af/0x2e7
[ 49.870064] ip_local_deliver+0x1b2/0x1c5
[ 49.871775] ? inet_del_offload+0x45/0x45
[ 49.873916] ip_rcv_finish+0x3f7/0x471
[ 49.875476] ip_rcv+0x3f1/0x42f
[ 49.876991] ? ip_local_deliver_finish+0x2e7/0x2e7
[ 49.878791] __netif_receive_skb_core+0x6d3/0x950
[ 49.880701] ? process_backlog+0x7e/0x216
[ 49.882589] __netif_receive_skb+0x1d/0x5e
[ 49.884122] process_backlog+0x10c/0x216
[ 49.885812] net_rx_action+0x147/0x3df
Fixes: a6ca7abe53633 ("tcp/dccp: fix lockdep splat in inet_csk_route_req()")
Fixes: c92e8c02fe66 ("tcp/dccp: fix ireq->opt races")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: kernel test robot <fengguang.wu@intel.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a6ca7abe53633d08eea1c6756cb49c9b2d4c90bf ]
This patch fixes the following lockdep splat in inet_csk_route_req()
lockdep_rcu_suspicious
inet_csk_route_req
tcp_v4_send_synack
tcp_rtx_synack
inet_rtx_syn_ack
tcp_fastopen_synack_time
tcp_retransmit_timer
tcp_write_timer_handler
tcp_write_timer
call_timer_fn
Thread running inet_csk_route_req() owns a reference on the request
socket, so we have the guarantee ireq->ireq_opt wont be changed or
freed.
lockdep can enforce this invariant for us.
Fixes: c92e8c02fe66 ("tcp/dccp: fix ireq->opt races")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f3594f0a7ea36661d7fd942facd7f31a64245f1a ]
t->err_count is used to count the link failure on tunnel and an err
will be reported to user socket in tx path if t->err_count is not 0.
udp socket could even return EHOSTUNREACH to users.
Since commit fd58156e45 ("IPIP: Use ip-tunneling code.") removed
the 'switch check' for icmp type in ipip_err(), err_count would be
increased by the icmp packet with ICMP_EXC_FRAGTIME code. an link
failure would be reported out due to this.
In Jianlin's case, when receiving ICMP_EXC_FRAGTIME a icmp packet,
udp netperf failed with the err:
send_data: data send error: No route to host (errno 113)
We expect this error reported from tunnel to socket when receiving
some certain type icmp, but not ICMP_EXC_FRAGTIME, ICMP_SR_FAILED
or ICMP_PARAMETERPROB ones.
This patch is to bring 'switch check' for icmp type back to ipip_err
so that it only reports link failure for the right type icmp, just as
in ipgre_err() and ipip6_err().
Fixes: fd58156e45 ("IPIP: Use ip-tunneling code.")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d04adf1b355181e737b6b1e23d801b07f0b7c4c0 ]
Now when migrating sock to another one in sctp_sock_migrate(), it only
resets owner sk for the data in receive queues, not the chunks on out
queues.
It would cause that data chunks length on the sock is not consistent
with sk sk_wmem_alloc. When closing the sock or freeing these chunks,
the old sk would never be freed, and the new sock may crash due to
the overflow sk_wmem_alloc.
syzbot found this issue with this series:
r0 = socket$inet_sctp()
sendto$inet(r0)
listen(r0)
accept4(r0)
close(r0)
Although listen() should have returned error when one TCP-style socket
is in connecting (I may fix this one in another patch), it could also
be reproduced by peeling off an assoc.
This issue is there since very beginning.
This patch is to reset owner sk for the chunks on out queues so that
sk sk_wmem_alloc has correct value after accept one sock or peeloff
an assoc to one sock.
Note that when resetting owner sk for chunks on outqueue, it has to
sctp_clear_owner_w/skb_orphan chunks before changing assoc->base.sk
first and then sctp_set_owner_w them after changing assoc->base.sk,
due to that sctp_wfree and it's callees are using assoc->base.sk.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f8d20b46ce55cf40afb30dcef6d9288f7ef46d9b ]
The similar fix in patch 'ipip: only increase err_count for some
certain type icmp in ipip_err' is needed for ip6gre_err.
In Jianlin's case, udp netperf broke even when receiving a TooBig
icmpv6 packet.
Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0f5da659d8f1810f44de14acf2c80cd6499623a0 ]
socket_diag shows information only about sockets from a namespace where
a diag socket lives.
But if we request information about one unix socket, the kernel don't
check that its netns is matched with a diag socket namespace, so any
user can get information about any unix socket in a system. This looks
like a bug.
v2: add a Fixes tag
Fixes: 51d7cccf07 ("net: make sock diag per-namespace")
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 864e2a1f8aac05effac6063ce316b480facb46ff ]
When syzkaller team brought us a C repro for the crash [1] that
had been reported many times in the past, I finally could find
the root cause.
If FlowLabel info is merged by fl6_merge_options(), we leave
part of the opt_space storage provided by udp/raw/l2tp with random value
in opt_space.tot_len, unless a control message was provided at sendmsg()
time.
Then ip6_setup_cork() would use this random value to perform a kzalloc()
call. Undefined behavior and crashes.
Fix is to properly set tot_len in fl6_merge_options()
At the same time, we can also avoid consuming memory and cpu cycles
to clear it, if every option is copied via a kmemdup(). This is the
change in ip6_setup_cork().
[1]
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 6613 Comm: syz-executor0 Not tainted 4.14.0-rc4+ #127
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801cb64a100 task.stack: ffff8801cc350000
RIP: 0010:ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168
RSP: 0018:ffff8801cc357550 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: ffff8801cc357748 RCX: 0000000000000010
RDX: 0000000000000002 RSI: ffffffff842bd1d9 RDI: 0000000000000014
RBP: ffff8801cc357620 R08: ffff8801cb17f380 R09: ffff8801cc357b10
R10: ffff8801cb64a100 R11: 0000000000000000 R12: ffff8801cc357ab0
R13: ffff8801cc357b10 R14: 0000000000000000 R15: ffff8801c3bbf0c0
FS: 00007f9c5c459700(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020324000 CR3: 00000001d1cf2000 CR4: 00000000001406f0
DR0: 0000000020001010 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
ip6_make_skb+0x282/0x530 net/ipv6/ip6_output.c:1729
udpv6_sendmsg+0x2769/0x3380 net/ipv6/udp.c:1340
inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
SYSC_sendto+0x358/0x5a0 net/socket.c:1750
SyS_sendto+0x40/0x50 net/socket.c:1718
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4520a9
RSP: 002b:00007f9c5c458c08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004520a9
RDX: 0000000000000001 RSI: 0000000020fd1000 RDI: 0000000000000016
RBP: 0000000000000086 R08: 0000000020e0afe4 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004bb1ee
R13: 00000000ffffffff R14: 0000000000000016 R15: 0000000000000029
Code: e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 ea 0f 00 00 48 8d 79 04 48 b8 00 00 00 00 00 fc ff df 45 8b 74 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
RIP: ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: ffff8801cc357550
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 509c7a1ecc8601f94ffba8a00889fefb239c00c6 ]
syzkaller got crashes in packet_getsockopt() processing
PACKET_ROLLOVER_STATS command while another thread was managing
to change po->rollover
Using RCU will fix this bug. We might later add proper RCU annotations
for sparse sake.
In v2: I replaced kfree(rollover) in fanout_add() to kfree_rcu()
variant, as spotted by John.
Fixes: a9b6391814 ("packet: rollover statistics")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: John Sperbeck <jsperbeck@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1cc276cec9ec574d41cf47dfc0f51406b6f26ab4 ]
Now sctp processes icmp redirect packet in sctp_icmp_redirect where
it calls sctp_transport_dst_check in which tp->dst can be released.
The problem is before calling sctp_transport_dst_check, it doesn't
check sock_owned_by_user, which means tp->dst could be freed while
a process is accessing it with owning the socket.
An use-after-free issue could be triggered by this.
This patch is to fix it by checking sock_owned_by_user before calling
sctp_transport_dst_check in sctp_icmp_redirect, so that it would not
release tp->dst if users still hold sock lock.
Besides, the same issue fixed in commit 45caeaa5ac0b ("dccp/tcp: fix
routing redirect race") on sctp also needs this check.
Fixes: 55be7a9c60 ("ipv4: Add redirect support to all protocol icmp error handlers")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0ad646c81b2182f7fa67ec0c8c825e0ee165696d ]
register_netdevice() could fail early when we have an invalid
dev name, in which case ->ndo_uninit() is not called. For tun
device, this is a problem because a timer etc. are already
initialized and it expects ->ndo_uninit() to clean them up.
We could move these initializations into a ->ndo_init() so
that register_netdevice() knows better, however this is still
complicated due to the logic in tun_detach().
Therefore, I choose to just call dev_get_valid_name() before
register_netdevice(), which is quicker and much easier to audit.
And for this specific case, it is already enough.
Fixes: 96442e4242 ("tuntap: choose the txq based on rxq")
Reported-by: Dmitry Alexeev <avekceeb@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5903f594935a3841137c86b9d5b75143a5b7121c ]
When pppol2tp_session_ioctl() is called by pppol2tp_tunnel_ioctl(),
the session may be unconnected. That is, it was created by
pppol2tp_session_create() and hasn't been connected with
pppol2tp_connect(). In this case, ps->sock is NULL, so we need to check
for this case in order to avoid dereferencing a NULL pointer.
Fixes: 309795f4be ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2b7cda9c35d3b940eb9ce74b30bbd5eb30db493d ]
Based on SNMP values provided by Roman, Yuchung made the observation
that some crashes in tcp_sacktag_walk() might be caused by MTU probing.
Looking at tcp_mtu_probe(), I found that when a new skb was placed
in front of the write queue, we were not updating tcp highest sack.
If one skb is freed because all its content was copied to the new skb
(for MTU probing), then tp->highest_sack could point to a now freed skb.
Bad things would then happen, including infinite loops.
This patch renames tcp_highest_sack_combine() and uses it
from tcp_mtu_probe() to fix the bug.
Note that I also removed one test against tp->sacked_out,
since we want to replace tp->highest_sack regardless of whatever
condition, since keeping a stale pointer to freed skb is a recipe
for disaster.
Fixes: a47e5a988a ("[TCP]: Convert highest_sack to sk_buff to allow direct access")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-by: Roman Gushchin <guro@fb.com>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cfbb0d90a7abb289edc91833d0905931f8805f12 upstream.
For the reinstall prevention, the code I had added compares the
whole key. It turns out though that iwlwifi firmware doesn't
provide the TKIP TX MIC key as it's not needed in client mode,
and thus the comparison will always return false.
For client mode, thus always zero out the TX MIC key part before
doing the comparison in order to avoid accepting the reinstall
of the key with identical encryption and RX MIC key, but not the
same TX MIC key (since the supplicant provides the real one.)
Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2bdd713b92a9cade239d3c7d15205a09f556624d upstream.
Otherwise we risk leaking information via timing side channel.
Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdf7cb4185b60c68e1a75e61691c4afdc15dea0e upstream.
When a key is reinstalled we can reset the replay counters
etc. which can lead to nonce reuse and/or replay detection
being impossible, breaking security properties, as described
in the "KRACK attacks".
In particular, CVE-2017-13080 applies to GTK rekeying that
happened in firmware while the host is in D3, with the second
part of the attack being done after the host wakes up. In
this case, the wpa_supplicant mitigation isn't sufficient
since wpa_supplicant doesn't know the GTK material.
In case this happens, simply silently accept the new key
coming from userspace but don't take any action on it since
it's the same key; this keeps the PN replay counters intact.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=DOmu
-----END PGP SIGNATURE-----
Merge 4.4.98 into android-4.4
Changes in 4.4.98
adv7604: Initialize drive strength to default when using DT
video: fbdev: pmag-ba-fb: Remove bad `__init' annotation
PCI: mvebu: Handle changes to the bridge windows while enabled
xen/netback: set default upper limit of tx/rx queues to 8
drm: drm_minor_register(): Clean up debugfs on failure
KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter
iommu/arm-smmu-v3: Clear prior settings when updating STEs
powerpc/corenet: explicitly disable the SDHC controller on kmcoge4
ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
crypto: vmx - disable preemption to enable vsx in aes_ctr.c
iio: trigger: free trigger resource correctly
phy: increase size of MII_BUS_ID_SIZE and bus_id
serial: sh-sci: Fix register offsets for the IRDA serial port
usb: hcd: initialize hcd->flags to 0 when rm hcd
netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family
IPsec: do not ignore crypto err in ah4 input
Input: mpr121 - handle multiple bits change of status register
Input: mpr121 - set missing event capability
IB/ipoib: Change list_del to list_del_init in the tx object
s390/qeth: issue STARTLAN as first IPA command
net: dsa: select NET_SWITCHDEV
platform/x86: hp-wmi: Fix detection for dock and tablet mode
cdc_ncm: Set NTB format again after altsetting switch for Huawei devices
KEYS: trusted: sanitize all key material
KEYS: trusted: fix writing past end of buffer in trusted_read()
platform/x86: hp-wmi: Fix error value for hp_wmi_tablet_state
platform/x86: hp-wmi: Do not shadow error values
x86/uaccess, sched/preempt: Verify access_ok() context
workqueue: Fix NULL pointer dereference
crypto: x86/sha1-mb - fix panic due to unaligned access
KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2]
ARM: 8720/1: ensure dump_instr() checks addr_limit
ALSA: seq: Fix OSS sysex delivery in OSS emulation
ALSA: seq: Avoid invalid lockdep class warning
MIPS: microMIPS: Fix incorrect mask in insn_table_MM
MIPS: Fix CM region target definitions
MIPS: SMP: Use a completion event to signal CPU up
MIPS: Fix race on setting and getting cpu_online_mask
MIPS: SMP: Fix deadlock & online race
test: firmware_class: report errors properly on failure
selftests: firmware: add empty string and async tests
selftests: firmware: send expected errors to /dev/null
tools: firmware: check for distro fallback udev cancel rule
MIPS: AR7: Defer registration of GPIO
MIPS: AR7: Ensure that serial ports are properly set up
Input: elan_i2c - add ELAN060C to the ACPI table
drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue
rbd: use GFP_NOIO for parent stat and data requests
can: sun4i: handle overrun in RX FIFO
can: c_can: don't indicate triple sampling support for D_CAN
x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context
PKCS#7: fix unitialized boolean 'want'
Linux 4.4.98
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 3a89eaa65db68bf53bf92dedc60084f810e1779a ]
The support for DSA Ethernet switch chips depends on TCP/IP networking,
thus explicit that HAVE_NET_DSA depends on INET.
DSA uses SWITCHDEV, thus select it instead of depending on it.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ebd89a2d0675f1325c2be5b7576fd8cb7e8defd0 ]
ah4 input processing uses the asynchronous hash crypto API which
supplies an error code as part of the operation completion but
the error code was being ignored.
Treat a crypto API error indication as a verification failure.
While a crypto API reported error would almost certainly result
in a memcpy of the digest failing anyway and thus the security
risk seems minor, performing a memory compare on what might be
uninitialized memory is wrong.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f169fd695b192dd7b23aff8e69d25a1bc881bbfa ]
After adding the following nft rule, then ping 224.0.0.1:
# nft add rule netdev t c pkttype host counter
The warning complain message will be printed out again and again:
WARNING: CPU: 0 PID: 10182 at net/netfilter/nft_meta.c:163 \
nft_meta_get_eval+0x3fe/0x460 [nft_meta]
[...]
Call Trace:
<IRQ>
dump_stack+0x85/0xc2
__warn+0xcb/0xf0
warn_slowpath_null+0x1d/0x20
nft_meta_get_eval+0x3fe/0x460 [nft_meta]
nft_do_chain+0xff/0x5e0 [nf_tables]
So we should deal with PACKET_LOOPBACK in netdev family too. For ipv4,
convert it to PACKET_BROADCAST/MULTICAST according to the destination
address's type; For ipv6, convert it to PACKET_MULTICAST directly.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a socket has a valid dst cache, then xfrm_lookup_route will get
skipped. However, the cache is not invalidated when applying policy to a
socket (i.e. IPV6_XFRM_POLICY). The result is that new policies are
sometimes ignored on those sockets. (Note: This was broken for IPv4 and
IPv6 at different times.)
This can be demonstrated like so,
1. Create UDP socket.
2. connect() the socket.
3. Apply an outbound XFRM policy to the socket. (setsockopt)
4. send() data on the socket.
Packets will continue to be sent in the clear instead of matching an
xfrm or returning a no-match error (EAGAIN). This affects calls to
send() and not sendto().
Invalidating the sk_dst_cache is necessary to correctly apply xfrm
policies. Since we do this in xfrm_user_policy(), the sk_lock was
already acquired in either do_ip_setsockopt() or do_ipv6_setsockopt(),
and we may call __sk_dst_reset().
Performance impact should be negligible, since this code is only called
when changing xfrm policy, and only affects the socket in question.
Change-Id: I54b4ec422aa5f4e31652a8c6913696f0a5610a51
Fixes: 00bc0ef5880d ("ipv6: Skip XFRM lookup if dst_entry in socket cache is valid")
Tested: https://android-review.googlesource.com/517555
Tested: https://android-review.googlesource.com/418659
Signed-off-by: Jonathan Basseri <misterikkit@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
(cherry picked from commit 2b06cdf3e688b98fcc9945873b5d42792bd4eee0)
* refs/heads/tmp-ceee5bd
BACKPORT: arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux
sched/core: fix have_sched_energy_data build warning
sched/core: Warn if ENERGY_AWARE is enabled but data is missing
sched: walt: Correct WALT window size initialization
FROMLIST: sched/fair: Use wake_q length as a hint for wake_wide
sched: WALT: account cumulative window demand
sched/fair: remove useless variable in find_best_target
sched/tune: access schedtune_initialized under CGROUP_SCHEDTUNE
sched/fair: consider task utilization in group_max_util()
sched/fair: consider task utilization in group_norm_util()
sched/fair: enforce EAS mode
sched/fair: ignore backup CPU when not valid
sched/fair: trace energy_diff for non boosted tasks
UPSTREAM: sched/fair: Sync task util before slow-path wakeup
UPSTREAM: sched/fair: Fix usage of find_idlest_group() when the local group is idlest
UPSTREAM: sched/fair: Fix usage of find_idlest_group() when no groups are allowed
BACKPORT: sched/fair: Fix find_idlest_group when local group is not allowed
UPSTREAM: sched/fair: Remove unnecessary comparison with -1
BACKPORT: sched/fair: Move select_task_rq_fair slow-path into its own function
UPSTREAM: sched/fair: Force balancing on nohz balance if local group has capacity
UPSTREAM: sched/core: Add missing update_rq_clock() call in set_user_nice()
UPSTREAM: sched/core: Add missing update_rq_clock() call for task_hot()
UPSTREAM: sched/core: Add missing update_rq_clock() in detach_task_cfs_rq()
UPSTREAM: sched/core: Add missing update_rq_clock() in post_init_entity_util_avg()
UPSTREAM: sched/core: Fix find_idlest_group() for fork
BACKPORT: sched/fair: Fix PELT integrity for new tasks
BACKPORT: sched/cgroup: Fix cpu_cgroup_fork() handling
UPSTREAM: sched/fair: Fix and optimize the fork() path
BACKPORT: sched/fair: Make it possible to account fair load avg consistently
cpufreq/sched: Consider max cpu capacity when choosing frequencies
Linux 4.4.95
FS-Cache: fix dereference of NULL user_key_payload
fscrypto: require write access to mount to set encryption policy
KEYS: Fix race between updating and finding a negative key
fscrypt: fix dereference of NULL user_key_payload
f2fs crypto: add missing locking for keyring_key access
f2fs crypto: replace some BUG_ON()'s with error checks
sched/autogroup: Fix autogroup_move_group() to never skip sched_move_task()
parisc: Fix double-word compare and exchange in LWS code on 32-bit kernels
parisc: Avoid trashing sr2 and sr3 in LWS code
pkcs7: Prevent NULL pointer dereference, since sinfo is not always set.
KEYS: don't let add_key() update an uninstantiated key
lib/digsig: fix dereference of NULL user_key_payload
KEYS: encrypted: fix dereference of NULL user_key_payload
rtlwifi: rtl8821ae: Fix connection lost problem
clockevents/drivers/cs5535: Improve resilience to spurious interrupts
bus: mbus: fix window size calculation for 4GB windows
brcmsmac: make some local variables 'static const' to reduce stack size
i2c: ismt: Separate I2C block read from SMBus block read
ALSA: hda: Remove superfluous '-' added by printk conversion
ALSA: seq: Enable 'use' locking in all configurations
drm/nouveau/mmu: flush tlbs before deleting page tables
drm/nouveau/bsp/g92: disable by default
can: esd_usb2: Fix can_dlc value for received RTR, frames
usb: musb: Check for host-mode using is_host_active() on reset interrupt
usb: musb: sunxi: Explicitly release USB PHY on exit
can: gs_usb: fix busy loop if no more TX context is available
ALSA: usb-audio: Add native DSD support for Pro-Ject Pre Box S2 Digital
usb: hub: Allow reset retry for USB2 devices on connect bounce
usb: quirks: add quirk for WORLDE MINI MIDI keyboard
usb: cdc_acm: Add quirk for Elatec TWN3
USB: serial: metro-usb: add MS7820 device id
USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor()
USB: devio: Revert "USB: devio: Don't corrupt user memory"
ANDROID: binder: show high watermark of alloc->pages.
ANDROID: binder: Add thread->process_todo flag.
UPSTREAM: arm64: compat: Remove leftover variable declaration
ANDROID: sched/fair: Select correct capacity state for energy_diff
Revert "UPSTREAM: efi/libstub/arm64: Set -fpie when building the EFI stub"
cpufreq: schedutil: clamp util to CPU maximum capacity
FROMLIST: android: binder: Fix null ptr dereference in debug msg
FROMLIST: android: binder: Change binder_shrinker to static
cpufreq/sched: Use cpu max freq rather than policy max
Conflicts:
include/linux/sched.h
kernel/sched/core.c
kernel/sched/fair.c
Change-Id: I2751f851df741f00e797deaf2119872b3dced655
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
For deaggregation, the real device receives a large linear skb and
passes it on to rmnet. rmnet creates new skbs from this large frame.
If the real device supports recycling, it does not need to allocate
the large skbs during packet reception and can instead reuse them.
CRs-Fixed: 2140499
Change-Id: I4f3c67bafe1918dc1a96690305d00cc8c625a9b7
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=vcfF
-----END PGP SIGNATURE-----
Merge 4.4.95 into android-4.4
Changes in 4.4.95
USB: devio: Revert "USB: devio: Don't corrupt user memory"
USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor()
USB: serial: metro-usb: add MS7820 device id
usb: cdc_acm: Add quirk for Elatec TWN3
usb: quirks: add quirk for WORLDE MINI MIDI keyboard
usb: hub: Allow reset retry for USB2 devices on connect bounce
ALSA: usb-audio: Add native DSD support for Pro-Ject Pre Box S2 Digital
can: gs_usb: fix busy loop if no more TX context is available
usb: musb: sunxi: Explicitly release USB PHY on exit
usb: musb: Check for host-mode using is_host_active() on reset interrupt
can: esd_usb2: Fix can_dlc value for received RTR, frames
drm/nouveau/bsp/g92: disable by default
drm/nouveau/mmu: flush tlbs before deleting page tables
ALSA: seq: Enable 'use' locking in all configurations
ALSA: hda: Remove superfluous '-' added by printk conversion
i2c: ismt: Separate I2C block read from SMBus block read
brcmsmac: make some local variables 'static const' to reduce stack size
bus: mbus: fix window size calculation for 4GB windows
clockevents/drivers/cs5535: Improve resilience to spurious interrupts
rtlwifi: rtl8821ae: Fix connection lost problem
KEYS: encrypted: fix dereference of NULL user_key_payload
lib/digsig: fix dereference of NULL user_key_payload
KEYS: don't let add_key() update an uninstantiated key
pkcs7: Prevent NULL pointer dereference, since sinfo is not always set.
parisc: Avoid trashing sr2 and sr3 in LWS code
parisc: Fix double-word compare and exchange in LWS code on 32-bit kernels
sched/autogroup: Fix autogroup_move_group() to never skip sched_move_task()
f2fs crypto: replace some BUG_ON()'s with error checks
f2fs crypto: add missing locking for keyring_key access
fscrypt: fix dereference of NULL user_key_payload
KEYS: Fix race between updating and finding a negative key
fscrypto: require write access to mount to set encryption policy
FS-Cache: fix dereference of NULL user_key_payload
Linux 4.4.95
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
* refs/heads/tmp-89074de
Linux 4.4.94
Revert "tty: goldfish: Fix a parameter of a call to free_irq"
cpufreq: CPPC: add ACPI_PROCESSOR dependency
nfsd/callback: Cleanup callback cred on shutdown
target/iscsi: Fix unsolicited data seq_end_offset calculation
uapi: fix linux/mroute6.h userspace compilation errors
uapi: fix linux/rds.h userspace compilation errors
ceph: clean up unsafe d_parent accesses in build_dentry_path
i2c: at91: ensure state is restored after suspending
net: mvpp2: release reference to txq_cpu[] entry after unmapping
scsi: scsi_dh_emc: return success in clariion_std_inquiry()
slub: do not merge cache if slub_debug contains a never-merge flag
ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
crypto: xts - Add ECB dependency
net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new probed PFs
sparc64: Migrate hvcons irq to panicked cpu
md/linear: shutup lockdep warnning
f2fs: do not wait for writeback in write_begin
Btrfs: send, fix failure to rename top level inode due to name collision
iio: adc: xilinx: Fix error handling
netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value.
net/mlx4_en: fix overflow in mlx4_en_init_timestamp()
mac80211: fix power saving clients handling in iwlwifi
mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length
irqchip/crossbar: Fix incorrect type of local variables
watchdog: kempld: fix gcc-4.3 build
locking/lockdep: Add nest_lock integrity test
Revert "bsg-lib: don't free job in bsg_prepare_job"
tipc: use only positive error codes in messages
net: Set sk_prot_creator when cloning sockets to the right proto
packet: only test po->has_vnet_hdr once in packet_snd
packet: in packet_do_bind, test fanout with bind_lock held
tun: bail out from tun_get_user() if the skb is empty
l2tp: fix race condition in l2tp_tunnel_delete
l2tp: Avoid schedule while atomic in exit_net
vti: fix use after free in vti_tunnel_xmit/vti6_tnl_xmit
isdn/i4l: fetch the ppp_write buffer in one shot
bpf: one perf event close won't free bpf program attached by another perf event
packet: hold bind lock when rebinding to fanout hook
net: emac: Fix napi poll list corruption
ip6_gre: skb_push ipv6hdr before packing the header in ip6gre_header
udpv6: Fix the checksum computation when HW checksum does not apply
bpf/verifier: reject BPF_ALU64|BPF_END
sctp: potential read out of bounds in sctp_ulpevent_type_enabled()
MIPS: Fix minimum alignment requirement of IRQ stack
drm/dp/mst: save vcpi with payloads
percpu: make this_cpu_generic_read() atomic w.r.t. interrupts
trace: sched: Fix util_avg_walt in sched_load_avg_cpu trace
sched/fair: remove erroneous RCU_LOCKDEP_WARN from start_cpu()
sched: EAS/WALT: finish accounting prior to task_tick
cpufreq: sched: update capacity request upon tick always
sched/fair: prevent meaningless active migration
sched: walt: Leverage existing helper APIs to apply invariance
Conflicts:
kernel/sched/core.c
kernel/sched/fair.c
kernel/sched/sched.h
Change-Id: I0effac90fb6a4db559479bfa2fefa31c41200ce9
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
commit 363b02dab09b3226f3bd1420dad9c72b79a42a76 upstream.
Consolidate KEY_FLAG_INSTANTIATED, KEY_FLAG_NEGATIVE and the rejection
error into one field such that:
(1) The instantiation state can be modified/read atomically.
(2) The error can be accessed atomically with the state.
(3) The error isn't stored unioned with the payload pointers.
This deals with the problem that the state is spread over three different
objects (two bits and a separate variable) and reading or updating them
atomically isn't practical, given that not only can uninstantiated keys
change into instantiated or rejected keys, but rejected keys can also turn
into instantiated keys - and someone accessing the key might not be using
any locking.
The main side effect of this problem is that what was held in the payload
may change, depending on the state. For instance, you might observe the
key to be in the rejected state. You then read the cached error, but if
the key semaphore wasn't locked, the key might've become instantiated
between the two reads - and you might now have something in hand that isn't
actually an error code.
The state is now KEY_IS_UNINSTANTIATED, KEY_IS_POSITIVE or a negative error
code if the key is negatively instantiated. The key_is_instantiated()
function is replaced with key_is_positive() to avoid confusion as negative
keys are also 'instantiated'.
Additionally, barriering is included:
(1) Order payload-set before state-set during instantiation.
(2) Order state-read before payload-read when using the key.
Further separate barriering is necessary if RCU is being used to access the
payload content after reading the payload pointers.
Fixes: 146aa8b145 ("KEYS: Merge the type-specific data with the payload data")
Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=gevA
-----END PGP SIGNATURE-----
Merge 4.4.94 into android-4.4
Changes in 4.4.94
percpu: make this_cpu_generic_read() atomic w.r.t. interrupts
drm/dp/mst: save vcpi with payloads
MIPS: Fix minimum alignment requirement of IRQ stack
sctp: potential read out of bounds in sctp_ulpevent_type_enabled()
bpf/verifier: reject BPF_ALU64|BPF_END
udpv6: Fix the checksum computation when HW checksum does not apply
ip6_gre: skb_push ipv6hdr before packing the header in ip6gre_header
net: emac: Fix napi poll list corruption
packet: hold bind lock when rebinding to fanout hook
bpf: one perf event close won't free bpf program attached by another perf event
isdn/i4l: fetch the ppp_write buffer in one shot
vti: fix use after free in vti_tunnel_xmit/vti6_tnl_xmit
l2tp: Avoid schedule while atomic in exit_net
l2tp: fix race condition in l2tp_tunnel_delete
tun: bail out from tun_get_user() if the skb is empty
packet: in packet_do_bind, test fanout with bind_lock held
packet: only test po->has_vnet_hdr once in packet_snd
net: Set sk_prot_creator when cloning sockets to the right proto
tipc: use only positive error codes in messages
Revert "bsg-lib: don't free job in bsg_prepare_job"
locking/lockdep: Add nest_lock integrity test
watchdog: kempld: fix gcc-4.3 build
irqchip/crossbar: Fix incorrect type of local variables
mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length
mac80211: fix power saving clients handling in iwlwifi
net/mlx4_en: fix overflow in mlx4_en_init_timestamp()
netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value.
iio: adc: xilinx: Fix error handling
Btrfs: send, fix failure to rename top level inode due to name collision
f2fs: do not wait for writeback in write_begin
md/linear: shutup lockdep warnning
sparc64: Migrate hvcons irq to panicked cpu
net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new probed PFs
crypto: xts - Add ECB dependency
ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
slub: do not merge cache if slub_debug contains a never-merge flag
scsi: scsi_dh_emc: return success in clariion_std_inquiry()
net: mvpp2: release reference to txq_cpu[] entry after unmapping
i2c: at91: ensure state is restored after suspending
ceph: clean up unsafe d_parent accesses in build_dentry_path
uapi: fix linux/rds.h userspace compilation errors
uapi: fix linux/mroute6.h userspace compilation errors
target/iscsi: Fix unsolicited data seq_end_offset calculation
nfsd/callback: Cleanup callback cred on shutdown
cpufreq: CPPC: add ACPI_PROCESSOR dependency
Revert "tty: goldfish: Fix a parameter of a call to free_irq"
Linux 4.4.94
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 4b86c459c7bee3acaf92f0e2b4c6ac803eaa1a58 ]
Commit 4dee62b1b9b4 ("netfilter: nf_ct_expect: nf_ct_expect_insert()
returns void") inadvertently changed the successful return value of
nf_ct_expect_related_report() from 0 to 1 due to
__nf_ct_expect_check() returning 1 on success. Prevent this
regression in the future by changing the return value of
__nf_ct_expect_check() to 0 on success.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d98937f4ea713d21e0fcc345919f86c877dd8d6f ]
iwlwifi now supports RSS and can't let mac80211 track the
PS state based on the Rx frames since they can come out of
order. iwlwifi is now advertising AP_LINK_PS, and uses
explicit notifications to teach mac80211 about the PS state
of the stations and the PS poll / uAPSD trigger frames
coming our way from the peers.
Because of that, the TIM stopped being maintained in
mac80211. I tried to fix this in commit c68df2e7be0c
("mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE")
but that was later reverted by Felix in commit 6c18a6b4e799
("Revert "mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE")
since it broke drivers that do not implement set_tim.
Since none of the drivers that set AP_LINK_PS have the
set_tim() handler set besides iwlwifi, I can bail out in
__sta_info_recalc_tim if AP_LINK_PS AND .set_tim is not
implemented.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aad06212d36cf34859428a0a279e5c14ee5c9e26 ]
In commit e3a77561e7 ("tipc: split up function tipc_msg_eval()"),
we have updated the function tipc_msg_lookup_dest() to set the error
codes to negative values at destination lookup failures. Thus when
the function sets the error code to -TIPC_ERR_NO_NAME, its inserted
into the 4 bit error field of the message header as 0xf instead of
TIPC_ERR_NO_NAME (1). The value 0xf is an unknown error code.
In this commit, we set only positive error code.
Fixes: e3a77561e7 ("tipc: split up function tipc_msg_eval()")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9d538fa60bad4f7b23193c89e843797a1cf71ef3 ]
sk->sk_prot and sk->sk_prot_creator can differ when the app uses
IPV6_ADDRFORM (transforming an IPv6-socket to an IPv4-one).
Which is why sk_prot_creator is there to make sure that sk_prot_free()
does the kmem_cache_free() on the right kmem_cache slab.
Now, if such a socket gets transformed back to a listening socket (using
connect() with AF_UNSPEC) we will allocate an IPv4 tcp_sock through
sk_clone_lock() when a new connection comes in. But sk_prot_creator will
still point to the IPv6 kmem_cache (as everything got copied in
sk_clone_lock()). When freeing, we will thus put this
memory back into the IPv6 kmem_cache although it was allocated in the
IPv4 cache. I have seen memory corruption happening because of this.
With slub-debugging and MEMCG_KMEM enabled this gives the warning
"cache_from_obj: Wrong slab cache. TCPv6 but object is from TCP"
A C-program to trigger this:
void main(void)
{
int fd = socket(AF_INET6, SOCK_STREAM, IPPROTO_TCP);
int new_fd, newest_fd, client_fd;
struct sockaddr_in6 bind_addr;
struct sockaddr_in bind_addr4, client_addr1, client_addr2;
struct sockaddr unsp;
int val;
memset(&bind_addr, 0, sizeof(bind_addr));
bind_addr.sin6_family = AF_INET6;
bind_addr.sin6_port = ntohs(42424);
memset(&client_addr1, 0, sizeof(client_addr1));
client_addr1.sin_family = AF_INET;
client_addr1.sin_port = ntohs(42424);
client_addr1.sin_addr.s_addr = inet_addr("127.0.0.1");
memset(&client_addr2, 0, sizeof(client_addr2));
client_addr2.sin_family = AF_INET;
client_addr2.sin_port = ntohs(42421);
client_addr2.sin_addr.s_addr = inet_addr("127.0.0.1");
memset(&unsp, 0, sizeof(unsp));
unsp.sa_family = AF_UNSPEC;
bind(fd, (struct sockaddr *)&bind_addr, sizeof(bind_addr));
listen(fd, 5);
client_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
connect(client_fd, (struct sockaddr *)&client_addr1, sizeof(client_addr1));
new_fd = accept(fd, NULL, NULL);
close(fd);
val = AF_INET;
setsockopt(new_fd, SOL_IPV6, IPV6_ADDRFORM, &val, sizeof(val));
connect(new_fd, &unsp, sizeof(unsp));
memset(&bind_addr4, 0, sizeof(bind_addr4));
bind_addr4.sin_family = AF_INET;
bind_addr4.sin_port = ntohs(42421);
bind(new_fd, (struct sockaddr *)&bind_addr4, sizeof(bind_addr4));
listen(new_fd, 5);
client_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
connect(client_fd, (struct sockaddr *)&client_addr2, sizeof(client_addr2));
newest_fd = accept(new_fd, NULL, NULL);
close(new_fd);
close(client_fd);
close(new_fd);
}
As far as I can see, this bug has been there since the beginning of the
git-days.
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit da7c9561015e93d10fe6aab73e9288e0d09d65a6 ]
Packet socket option po->has_vnet_hdr can be updated concurrently with
other operations if no ring is attached.
Do not test the option twice in packet_snd, as the value may change in
between calls. A race on setsockopt disable may cause a packet > mtu
to be sent without having GSO options set.
Fixes: bfd5f4a3d6 ("packet: Add GSO/csum offload support.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4971613c1639d8e5f102c4e797c3bf8f83a5a69e ]
Once a socket has po->fanout set, it remains a member of the group
until it is destroyed. The prot_hook must be constant and identical
across sockets in the group.
If fanout_add races with packet_do_bind between the test of po->fanout
and taking the lock, the bind call may make type or dev inconsistent
with that of the fanout group.
Hold po->bind_lock when testing po->fanout to avoid this race.
I had to introduce artificial delay (local_bh_enable) to actually
observe the race.
Fixes: dc99f60069 ("packet: Add fanout support.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 62b982eeb4589b2e6d7c01a90590e3a4c2b2ca19 ]
If we try to delete the same tunnel twice, the first delete operation
does a lookup (l2tp_tunnel_get), finds the tunnel, calls
l2tp_tunnel_delete, which queues it for deletion by
l2tp_tunnel_del_work.
The second delete operation also finds the tunnel and calls
l2tp_tunnel_delete. If the workqueue has already fired and started
running l2tp_tunnel_del_work, then l2tp_tunnel_delete will queue the
same tunnel a second time, and try to free the socket again.
Add a dead flag to prevent firing the workqueue twice. Then we can
remove the check of queue_work's result that was meant to prevent that
race but doesn't.
Reproducer:
ip l2tp add tunnel tunnel_id 3000 peer_tunnel_id 4000 local 192.168.0.2 remote 192.168.0.1 encap udp udp_sport 5000 udp_dport 6000
ip l2tp add session name l2tp1 tunnel_id 3000 session_id 1000 peer_session_id 2000
ip link set l2tp1 up
ip l2tp del tunnel tunnel_id 3000
ip l2tp del tunnel tunnel_id 3000
Fixes: f8ccac0e44 ("l2tp: put tunnel socket release on a workqueue")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 12d656af4e3d2781b9b9f52538593e1717e7c979 ]
While destroying a network namespace that contains a L2TP tunnel a
"BUG: scheduling while atomic" can be observed.
Enabling lockdep shows that this is happening because l2tp_exit_net()
is calling l2tp_tunnel_closeall() (via l2tp_tunnel_delete()) from
within an RCU critical section.
l2tp_exit_net() takes rcu_read_lock_bh()
<< list_for_each_entry_rcu() >>
l2tp_tunnel_delete()
l2tp_tunnel_closeall()
__l2tp_session_unhash()
synchronize_rcu() << Illegal inside RCU critical section >>
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 0, pid: 86, name: kworker/u16:2
INFO: lockdep is turned off.
CPU: 2 PID: 86 Comm: kworker/u16:2 Tainted: G W O 4.4.6-at1 #2
Hardware name: Xen HVM domU, BIOS 4.6.1-xs125300 05/09/2016
Workqueue: netns cleanup_net
0000000000000000 ffff880202417b90 ffffffff812b0013 ffff880202410ac0
ffffffff81870de8 ffff880202417bb8 ffffffff8107aee8 ffffffff81870de8
0000000000000c51 0000000000000000 ffff880202417be0 ffffffff8107b024
Call Trace:
[<ffffffff812b0013>] dump_stack+0x85/0xc2
[<ffffffff8107aee8>] ___might_sleep+0x148/0x240
[<ffffffff8107b024>] __might_sleep+0x44/0x80
[<ffffffff810b21bd>] synchronize_sched+0x2d/0xe0
[<ffffffff8109be6d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff8105c7bb>] ? __local_bh_enable_ip+0x6b/0xc0
[<ffffffff816a1b00>] ? _raw_spin_unlock_bh+0x30/0x40
[<ffffffff81667482>] __l2tp_session_unhash+0x172/0x220
[<ffffffff81667397>] ? __l2tp_session_unhash+0x87/0x220
[<ffffffff8166888b>] l2tp_tunnel_closeall+0x9b/0x140
[<ffffffff81668c74>] l2tp_tunnel_delete+0x14/0x60
[<ffffffff81668dd0>] l2tp_exit_net+0x110/0x270
[<ffffffff81668d5c>] ? l2tp_exit_net+0x9c/0x270
[<ffffffff815001c3>] ops_exit_list.isra.6+0x33/0x60
[<ffffffff81501166>] cleanup_net+0x1b6/0x280
...
This bug can easily be reproduced with a few steps:
$ sudo unshare -n bash # Create a shell in a new namespace
# ip link set lo up
# ip addr add 127.0.0.1 dev lo
# ip l2tp add tunnel remote 127.0.0.1 local 127.0.0.1 tunnel_id 1 \
peer_tunnel_id 1 udp_sport 50000 udp_dport 50000
# ip l2tp add session name foo tunnel_id 1 session_id 1 \
peer_session_id 1
# ip link set foo up
# exit # Exit the shell, in turn exiting the namespace
$ dmesg
...
[942121.089216] BUG: scheduling while atomic: kworker/u16:3/13872/0x00000200
...
To fix this, move the call to l2tp_tunnel_closeall() out of the RCU
critical section, and instead call it from l2tp_tunnel_del_work(), which
is running from the l2tp_wq workqueue.
Fixes: 2b551c6e7d ("l2tp: close sessions before initiating tunnel delete")
Signed-off-by: Ridge Kennedy <ridge.kennedy@alliedtelesis.co.nz>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 008ba2a13f2d04c947adc536d19debb8fe66f110 ]
Packet socket bind operations must hold the po->bind_lock. This keeps
po->running consistent with whether the socket is actually on a ptype
list to receive packets.
fanout_add unbinds a socket and its packet_rcv/tpacket_rcv call, then
binds the fanout object to receive through packet_rcv_fanout.
Make it hold the po->bind_lock when testing po->running and rebinding.
Else, it can race with other rebind operations, such as that in
packet_set_ring from packet_rcv to tpacket_rcv. Concurrent updates
can result in a socket being added to a fanout group twice, causing
use-after-free KASAN bug reports, among others.
Reported independently by both trinity and syzkaller.
Verified that the syzkaller reproducer passes after this patch.
Fixes: dc99f60069 ("packet: Add fanout support.")
Reported-by: nixioaming <nixiaoming@huawei.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
