It is observed that the hard ID IRQ is enabled when the
threaded IRQ handler for the same is still running. In that
case, there are two issues. The ID LOW IRQ can come
consecutively which will increase the disable count of
vbus_irq. Then ID HIGH IRQ will not enable the vbus_irq and
peripheral mode detection will not work anymore. The second
issue is that ID HIGH IRQ is fired just before ID LOW IRQ.
This will mark usb->id_state from HIGH to LOW even while
threaded IRQ is running which will lead to host not getting
stopped and peripheral mode not working.
Fix both issues by maintaning a local copy of ID IRQ in
threaded IRQ handler and comparing it with previous ID state.
If same, then bail out.
Change-Id: If5da1f91ece9d1751d7002e64bab0e145623a92e
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
This changes removes the unwanted gsi dedug register reads, to which
IPA driver dont have access to.
Change-Id: I6efb1045275a9bdb238e6184ec676013ab1678bc
Acked-by: Jyothi Jayanthi <jyothij@qti.qualcomm.com>
Signed-off-by: Michael Adisumarta <madisuma@codeaurora.org>
Add new dummy tv tuner driver and its documentation.
Update Makefile, Kconfig and add new tuner id type to msm_ba.h
Change-Id: I14f822ad9fdf85ea7509067d536c49fd24cf1609
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
Get lane count and settle count from device tree.
Add VIDIOC_G_CSI_PARAMS ioctl to pass lane count
and settle count values to userspace.
Change-Id: Ic0e0b7b402908c9970fd1771cf9bf19627f5a5d8
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
As the length datatype is signed, supplying a negative number
can have undesired consequences. Always use unsigned integer
types for length values.
Change-Id: Ifde2f0d35129014b976507f7723a319c53fabddf
Acked-by: Thyagarajan Venkatanarayanan <venkatan@qti.qualcomm.com>
Signed-off-by: Tharun Kumar Merugu <mtharu@codeaurora.org>
With this, it becomes clear to know it is HAB's log and
which line of which function shows the log. Moreover, it
is helpful for issue debugging with those prepared logs.
Change-Id: I9641e779f592a5be7750885228cac6374880c301
Signed-off-by: Yong Ding <yongding@codeaurora.org>
Increase the CAN controller reset time to 200ms on msm8996
CV2X boards. This is the time we expect the CAN micro-controller
will take to complete its boot up process.
Change-Id: Ib70a8ac6eb296558a42eb7d34b73a384c7b7e8c8
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Image address and size must be aligned to 4k as the SMMU works on a
4k granularity.
Change-Id: I4780aa67f09796ec0a8dd5b62da0e9a99c50e596
Signed-off-by: Kyle Yan <kyan@codeaurora.org>
Add support to set and get audio effects module params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
Use common pack and set param functions to set and
get parameters to DSP instead of handling them at an
individual module level.
CRs-Fixed: 2151551
Change-Id: I62342d434fc5bd58c06d22913683d7d0fd602da9
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add support to set and get ASM module params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
Use common pack and set param functions to set and
get parameters to DSP instead of handling them at an
individual module level.
CRs_Fixed: 2151551
Change-Id: I48a0f0f856d8b8b59b7e7361fae63283e0f87948
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add support to set and get dap modules params with
Instance ID support for both Dolby and DS2.
Maintain support for non Instance ID set and get param
structures as well. Use common pack and set param
functions to set and get parameters to DSP instead of
handling them at an individual module level.
CRs-Fixed: 2151551
Change-Id: Ic2722cf5d686a7b10c682ca7866f7900da9d0cdb
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add support to set and get ADM module params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
Use common pack and set param functions to set and
get parameters to DSP instead of handling them at an
individual module level.
CRs-Fixed: 2151551
Change-Id: Ida9591e96501a2edbffe080eb8531c860bde8539
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add support to set and get rtac params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
Use common pack and set param functions to set and
get parameters to DSP instead of handling them at an
individual module level.
CRs-Fixed: 2151551
Change-Id: Ic07cb109b9e469dccf510f89ba9917e8c9eccbd8
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add support to set and get AFE module params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
Use common pack and set param functions to set and
get parameters to DSP instead of handling them at an
individual module level.
CRs-Fixed: 2151551
Change-Id: I9f2cc097a0f1a99a4639bb0cd636500b41a41b1b
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add support to set and get voice module params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
Use common pack and set param functions to set and
get parameters to DSP instead of handling them at an
individual module level.
CRs-Fixed: 2151551
Change-Id: If18c89ef6e0e98419d271923387eae10d45cb7f3
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add support to set and get LSM module params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
CRs-Fixed: 2151551
Change-Id: I138cceb5165443da899e7c152fd6c8a05a6efe98
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add common headers and functions needed to support instance ID.
CRs-Fixed: 2151551
Change-Id: I8a167be29cdb5c365ac957530789007e90a91a97
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
This allows Host to load NDIS 6.0 driver for RNDIS over ethernet.
Design objectives of NDIS 6.0 is to enhance driver performance
and scalability. Observing higher peak tput (308Mbps --> 480Mbps)
for FTP transfer on live network. It resolves the data stall that
is being caused by the sudden transfer abort coming from the NDIS
5.0 Host driver.
Change-Id: I062d07ff3bd63b8a610166cf77714424055d962c
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
When the battery is in cold temperature for a certain amount of
time and device is charged with Qnovo enabled charging, ESR pulse
will fire less frequently. This along with ESR pulses not getting
qualified can cause the ESR to be less accurate. To improve ESR
accuracy, add change to apply relaxed filter coefficients once
the battery temperature starts ramping up after hitting a lower
threshold of say 6 C after charging begins.
CRs-Fixed: 2151708
Change-Id: Iff6c2ffbab1f327dfefcf1550213c37df4a8ad42
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Add stepper algorithm support with dynamically calculated step
size or delay based on the brightness level change using the
brightness map table.
To help with running the algorithm efficiently, use a separate
workqueue with high priority to process the brightness levels.
Change-Id: Iea2a8da73b6bee3eaa7b28a12fd82c2a1507db99
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
If modem crashed during wlan driver unloading, icnss driver
will call driver uevent callback to send FW down uevent when
it receives BEFORE_SHUTDOWN notification. If wlan driver is
de-initialized just before the callback is called, kernel will
panic as driver's context is freed. This can be avoid by not
sending uevent when wlan host driver is unloading. Instead,
icnss driver will provide an API to host driver to check if
WLAN FW is down or not.
CRs-Fixed: 2161425
Change-Id: I569fd85366522606ececeda74df85c51b9b2fc28
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Camera bridge chip is not getting detected on CDP for automotive platform.
Defined and added regulator LDO26 which needs to be turned on for the chip
to be detected.
Change-Id: I0400bf1430d588852d4143e7b28f33927614ee90
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
New Android versions are using kernel AIO functionality for adb &
MTP interfaces for better performance. Hence enable CONFIG_AIO to
support same.
Change-Id: I8bfd6c631642f60390ee656e10d666766749f7b3
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
usb_ep_alloc_request() may sleep with current flag
GFP_KERNEL, but it is in atomic context, change
flag to GFP_ATOMIC to fix this issue.
Change-Id: Ic43a25f0a504d7fed104e636a9a614a4398820ab
Signed-off-by: Liangliang Lu <luliang@codeaurora.org>
Add new IP filtering bitmaps to match TCP SYN packets.
Change-Id: I73ab2944c3d351fdb57f147d3efedd1b5829835e
Acked-by: Pooja Kumari <kumarip@qti.qualcomm.com>
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
Acked-by: Shihuan Liu <shihuanl@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Currently IPA send common error -EFAULT to user space
in case of IOCTL fails. Change error value for set quota
based on error received from modem.
Change-Id: Ib6ba487a186245ddf752cd08de12293af1ea1bb9
Acked-by: Pooja Kumari <kumarip@qti.qualcomm.com>
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
