Add the QSEECOM ION heap node, to allow QSEECOM driver and QSEECOM
API library to allocate ION memory from QSEECOM heap.
Change-Id: Ia0b346bbac9378b79d1b7683ee1cc0ade533b4fa
Signed-off-by: Amit Blay <ablay@codeaurora.org>
User space can remove the P2P management interface while it is active
(for example, while listen/search is active) and this can cause
a crash. Ensure the P2P device is fully stopped before removing.
Change-Id: Ibc94f12bc63f2ba31ede24afffd9c5acbf95467a
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 69fecf599f48e258984b2ffdf0a4c65a35a31287
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Connect can take longer than current timeout in some scenarios,
for example with long-range antenna array. Increase the timeout
to support these scenarios.
Change-Id: Id59cf4f11f8381ab8eab748171ef2b7949dde887
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: d83ad4c4fd78b22935711f865048bab78b43fc86
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
When FW starts running it can get D0 to D3 interrupt that is a leftover
from previous system suspend while FW was not running.
As this interrupt is not relevant anymore, clear it part of device reset
procedure.
Change-Id: I213a18fd59a500914ab22f75a72393786188a08e
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 7086d861753bc0aaa8b6445f657d8e39953e4fcd
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Re-arrange the code to have dedicated function for device configuration
which takes place before FW starts running.
Change-Id: Ia0f2b33f85ba9547bee9415e34143e5b09e28447
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 1490846d256af947a4743f04ba8c97dc3bc37073
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Align to latest version of the auto generated wmi file
describing the interface with FW.
Change-Id: I5cd2130c17457544d055aaff15f5747a3d241e23
Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 761f8e4d463e1cbf6da0d228bc74cecc800d4de5
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Since debugfs is a kernel configuration option, enable the driver to
compile without debugfs.
Change-Id: Id1b162172e2662a59af5b031a71ccd22250e4b6d
Signed-off-by: Gidon Studinski <qca_gidons@qca.qualcomm.com>
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 5f591dac9f20f76439df2e18570765d384a94070
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Sometimes there is a firmware crash but the hardware
is not fully stopped and continue to send TX/RX interrupts.
This can cause an overload of messages which can bring the
host down. Add ratelimit to these error messages to fix this.
Change-Id: If0f8bfbec1df1c5d98c87d64191ef14bf6579ae1
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 40cbd88be702a2455b6e047dc13f5d51ed542063
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Userspace thermal daemon initiate KTM hotplug monitor related
initialization. Thermal core control can be disabled/enabled from
userspace via KTM sysfs for cpu related initialization after boot.
There is a possible race condition between KTM hotplug initialization
from thermal daemon and KTM core control re-enablement from userpsace
shell. When these both events are triggered at the same time,
thermal core control enablement tries to set emergency hotplug
threshold prior to per cpu hotplug related initialization like sensor
id, trip and threshold value etc. This leads to wrong sensor
threshold settings and eventually thermal core sensor threshold list
will be broken.
To avoid this wrong threshold settings during thermal core control
enablement, check KTM hotplug related initialization is done prior
to threshold setting for each core.
Change-Id: I916527d187146d5e292dd57897aa70b21cf87fbc
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
QMI handle was not destroyed during unload and server exit
and resulting in qmi handle leak.
Fix this problem by destroying the QMI handle during
driver unload and server exit.
Change-Id: I7557de7c2ff2cb7d82d6e8a3480e8d5f4be6a5f4
Signed-off-by: Govind Singh <govinds@codeaurora.org>
A3xx device gets the ring buffer read pointer directly
from the GPU registers. So don’t allocate scratch memory
which can’t be used for A3xx GPU devices.
Change-Id: I95016dfc169b9fee74e978f5560592740f34515e
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
Stall on page fault feature is supported on A5XX and later GPUs.
Enabling this feature on unsupported GPUs causes GPU faults.
So don't insert GPU stall related commands in ringbuffer if
not supported. But allow user to capture the GPU snapshot on
GPU page fault.
Change-Id: Ied26a5b4f44c1877b289a0ff5c0a6d47901e453d
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use
tty_port_close") created a case where a port used for a console does not
get shutdown on tty closing. Then a call to uart_tx_stopped() segfaults
because the tty is NULL. This could be fixed to restore old behavior,
but we also want to allow tty_ports to work without a tty attached. So
this change to allow a NULL tty_struct is needed either way.
Fixes: 761ed4a94582
("tty: serial_core: convert uart_close to use tty_port_close")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change-Id: Ifbeeacc89d396b857332ce94cc2d77bdd6e12bb7
Git-repo: git://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git
Git-commit: a727b025f43d7952c0697562f5cecda9f42758aa
Signed-off-by: Lei wang <leiwan@codeaurora.org>
Add a node for a GPIO-based FAN cooling device for msm8996
CV2X boards. This GPIO has a single speed and can be controlled
from user space.
Change-Id: Iee427407f3c4032e1394c61dd1f225e24a091a99
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Enable the GPIO FAN driver to enable control of GPIO based
fans for cooling on msm8996-auto devices.
Change-Id: I5494fae1c7ab75362bc6c71c4e731f0581b01995
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Reduce the frequency of kgsl logging when kgsl driver failed to get
memory mapping for requested memory.
Change-Id: If1a8832a9aa0396e3c990916deec7949697be12d
Signed-off-by: Venkateswara Rao Tadikonda <vtadik@codeaurora.org>
Sparse bind object are unbinded with bind id. This
can be exploited by any malicious application calling
unbind with same bind id again and again.
This can lead to a race condition between two threads
where one free the bind object and second thread uses
same object leading to bad dereference.
Change-Id: I542a008fc647489560667fb5016453a0c3448f7a
Signed-off-by: Sunil Khatri <sunilkh@codeaurora.org>
Provide support to cache CNE event for debugging purpose.
Change-Id: I00d101d3b9a627d7aba3e4524ff301797ea6085e
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
Change the OTG regulator ops to static for smb1351 and smb135x
charger drivers.
Change-Id: Ide0c6461275f3ba74e0420e1d1a36c1e1f2bd18d
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
In certain conditions, after the battery SOC reaches 100%, SOC is
not getting updated during discharging. Based on the hardware
recommendation, adjust the Ki coefficient for full SOC so that
SOC can be updated faster during discharging.
While at it, remove prev_charge_status variable which is not
used really.
CRs-Fixed: 2089555
Change-Id: I54b7d86529c21c016ab777053895ccda9c7a2b35
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Currently, FULL_SOC and MONOTONIC_SOC registers are updated
multiple times when the recharge SOC threshold is close enough to
trigger the recharging frequently. This was leading to a SOC
fluctuation when SOC masking algorithm is enabled.
Rearrange charge_full_update used in SOC masking algorithm such
that FULL_SOC and MONOTONIC_SOC registers are updated just once
when the charge_full flag is cleared.
Also, when the device is rebooted/shutdown and if charge_full
flag is set, write to FULL_SOC with battery_soc and a full value
to MONOTONIC_SOC registers. This helps to maintain the same SOC
across a device reboot.
Change-Id: I95afa90f27e4c0f948f301ff8d6a1f84ae422ef0
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Add a device tree node for the SPI CAN controller to enable
a CAN network interface for msm8996 CV2X boards.
Change-Id: Ib9c1d63bf86e3b823aa8d762065ed374bdfeaa0e
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Enable configuration for K61 CAN over SPI driver.
Change-Id: I801629ac04303582530bed354282960db8f9c9ab
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Add new parameters to account for different MCUs that can
be used with this driver. These devices have different reset
sequences and number of bits per word supported via SPI. Add
bindings for the mpc5746c controller and make the reset signal
optional.
Change-Id: I616dd3cfedf18a6e21683e1c07551c57c62a675d
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
This driver creates Network device of type CAN
and processes tx and rx frames that it sends and
receives over SPI protocol.
Change-Id: I54a8665d1b9eda7e9b1ff695bd67de312c410195
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Signed-off-by: Abinaya P <abinayap@codeaurora.org>
The patch adds the support for buffering mode configuration
for peripherals not supporting diag_id.
CRs-Fixed: 2104591
Change-Id: I2ed34a5141a9b9042dc925c9109d22009b272484
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
This allows Host to load NDIS 6.0 driver for RNDIS over ethernet.
Design objectives of NDIS 6.0 is to enhance driver performance
and scalability. Observing higher peak tput (308Mbps --> 480Mbps)
for FTP transfer on live network. It resolves the data stall that
is being caused by the sudden transfer abort coming from the NDIS
5.0 Host driver.
Change-Id: I503a5573af71eb1b004c68abb64bb04d7e06f9af
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
