The DisplayPort PHY driver needs information about the number
of lanes and the plug orientation to do additional settings.
Add code to support this.
Change-Id: Iafb890596283320dbcb2b4e2e0d83cabfdfcd18e
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
First update the audio switch node to indicate that the cable was
disconnected. Wait for the audio codec to indicate that the teardown
of the audio path has been completed, timing out after three
seconds. This ensures that the audio framework will start and end
the audio teardown while the interface VSync is still running,
ensuring a graceful shutdown of the audio path.
CRs-Fixed: 1074218
Change-Id: Ia9c792613e5cd9ac273185c6b2f4b30b5df67496
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Add support to handle different HW versions on the driver.
Update register/sequences per HPG.
Change-Id: Ibb6b1ce3a035260edbba61c2a443bbda09b17cee
CRs-Fixed: 1019773
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Rotator HW cannot support 0 dimension of input and output image. During
V4L2 validation, it must reject any 0 size image format setting.
CRs-Fixed: 1073633
Change-Id: I503561677271c39894b7a6910fe8d9c5c25e9c28
Signed-off-by: Benjamin Chan <bkchan@codeaurora.org>
Added initial support for fine timing measurement(FTM)
and angle of arrival (AOA). These features allow a station
to get an accurate indoor location by measuring
distance (FTM) and azimuth/elevation (AOA) to one or more
stations/APs with a known location.
The following APIs are supported:
1. Get FTM/AOA capabilities, currently hard-coded for a
single-shot measurement to an associated AP
2. Start FTM session
3. Receive FTM results
4. Start standalone AOA measurement
5. Receive AOA results
Change-Id: I54ebc1bdff6ed7d91644165b16eb0a4240069321
CRs-Fixed: 1057307
Signed-off-by: Lior David <liord@codeaurora.org>
If the wait for global fails due to timeout then nothing after this
point is likely to work very well. Get GPU snapshot in addition to
BUG_ON(), to analyze the GPU fault.
CRs-Fixed: 1053780
Change-Id: I29930120a72a08533c859002f646af93e67c754f
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
Add support for the graphics clock controller found on MSMFalcon based
devices. This should allow graphics clocks for GFX clients to be able to do
clock functionality.
Change-Id: I753b40d574a4afc2104a5c2bfe64b4831fbce8a0
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Provide API to check QMI support present or not to WLAN
host driver. Based on this information driver can pass the
DMA physical address info via shadow register to WLAN FW.
CRs-Fixed: 1073647
Change-Id: Iec9d3a3b468ddf6607e4a942bb3cf9133e9f0c34
Signed-off-by: Hardik Kantilal Patel <hkpatel@codeaurora.org>
For MSMfalcon and MSMtriton, clock consumers requires dummy
rpmcc, gcc, mmss and gfx clocks for their operation so add
the support for registering dummy clocks as follows:
- Add clock-output-names property for the rpmcc, gcc, mmss
and gfx clock controller nodes.
- Add reset-cells property for clock controller nodes.
- Add two fixed clock nodes named as xo_board and sleep_clk.
- Remove RPM clock IDs from qcom,gcc-msmfalcon.h.
- Modify RPM clock names as per qcom,rpmcc.h file.
Change-Id: I06262fe271ab6ba81d4fa5f67315fd1b54edee8c
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
This patch fixes the possible out of bound access by accessing
only dci supported peripheral feature.
Bug: 31864832
CRs-Fixed: 1074901
Change-Id: I99b7feb4b9af8480912a0a3b3e9834f0ecd92189
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
Disable PLL droop detection and update the OSM timer settings
on MSMCOBALT.
CRs-Fixed: 1072855
Change-Id: I1f769f9ff5a0bab594593c3deaec264a9060c28f
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
User SSR triggers a SYS_ERROR from the hardware.
However the driver cannot detect if the error is
due to user SSR or other reasons. Handle SYS_ERROR
due to user SSR as non-fatal
CRs-Fixed: 1054921
Change-Id: I4151b6bfb24e55c1f1a38bfdca012f7b7af86603
Signed-off-by: Umesh Pandey <umeshp@codeaurora.org>
Declare the rcg structure before referencing it in the
function.
Change-Id: Ife9fdabf20b242a93635532b9a0c4cacc8b88210
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
OTG devices with high capacitance could cause a system UVLO
due to a large amount of in-rush current drawn from battery.
Fix this by regulating the OTG boost start and altering PFM
threshold in software.
CRs-Fixed: 1048244
Change-Id: I08838d81eb99a424a3fd396582c56b120cbb46cb
Signed-off-by: Harry Yang <harryy@codeaurora.org>
PMICv2 added irq support to tell if DCP is not QC charger.
Update charger driver for this HW change.
Change-Id: Ic75e2f1d528e6bbb3cf14c842b803bf4ebca8ad8
Signed-off-by: Harry Yang <harryy@codeaurora.org>
USB charger voltage votes indenpently, along with ICL through
intermediate USBIN votable.
This change can correctly capture strong chargers by
monitoring input voltage or charger type.
CRs-Fixed: 1069575
Change-Id: I36843279fdac909966b3f01b5a6716d191fab903
Signed-off-by: Harry Yang <harryy@codeaurora.org>
The current driver simply skips checking for other events in the
typec change interrupt if an vbus error is seen. This could cause
parallel charging to never get enabled among other issues.
Fix is by simply printing a debug messages for vbus-error and
handling other events.
CRs-Fixed: 1069575
Change-Id: Ic2df178430b80ade1dea9aff7dbf8e08bb9c2310
Signed-off-by: Harry Yang <harryy@codeaurora.org>
The issue results from a earlier wrong assumption that parallel
psy is available when master side is ready. The happens on boot
with a strong charger attached, when FCC callback is about to
redistribute charging currents while parallel charger has not
yet probed, hence pl psy is invalid when accessed.
This issue is fixed by introducing parallel charger as a parallel
charging voter, which is also convenient for debugging purpose.
CRs-Fixed: 1059499
Change-Id: Ic96d30a02c966704d98e047602e4292f576fe448
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Before going for full PLL enable sequence, we need to clear out the
override bit and precalibrated values of VCO_TUNE and KVCO_CODE, as
these registers might be storing values for old VCO rate. This will
cause the DSI PLL to be in a bad state and hence PLL unlock errors
might occur during use case like resolution switch. So always clear
the precalibrated values first in PLL configuration sequence.
Change-Id: I407920d63b4600b610794141e5b7ceb5a33980c1
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Currently dispatcher accepts kgsl_cmdbatch object. This object
is a superset of all the types of objects dispatcher accepts.
Split kgsl_cmdbatch object to SYNC and IB/MARKER objects and
structure the code to make it easier for new type of objects
to be added to the dispatcher queue.
CRs-Fixed: 1054354
Change-Id: I2d482d1081ce6fdb7925243c88ce00ea6b864efe
Signed-off-by: Tarun Karra <tkarra@codeaurora.org>
