Enable CONFIG_CGROUP_DEBUG to address the compatibility issue with
AOSP.
Change-Id: I30aa2341535bc53982034e7f8ef430137c102177
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
* refs/heads/tmp-3f51ea2
Linux 4.4.133
x86/kexec: Avoid double free_page() upon do_kexec_load() failure
hfsplus: stop workqueue when fill_super() failed
cfg80211: limit wiphy names to 128 bytes
gpio: rcar: Add Runtime PM handling for interrupts
time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting
dmaengine: ensure dmaengine helpers check valid callback
scsi: zfcp: fix infinite iteration on ERP ready list
scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()
scsi: libsas: defer ata device eh commands to libata
s390: use expoline thunks in the BPF JIT
s390: extend expoline to BC instructions
s390: move spectre sysfs attribute code
s390/kernel: use expoline for indirect branches
s390/lib: use expoline for indirect branches
s390: move expoline assembler macros to a header
s390: add assembler macros for CPU alternatives
ext2: fix a block leak
tcp: purge write queue in tcp_connect_init()
sock_diag: fix use-after-free read in __sk_free
packet: in packet_snd start writing at link layer allocation
net: test tailroom before appending to linear skb
btrfs: fix reading stale metadata blocks after degraded raid1 mounts
btrfs: fix crash when trying to resume balance without the resume flag
Btrfs: fix xattr loss after power failure
ARM: 8772/1: kprobes: Prohibit kprobes on get_user functions
ARM: 8770/1: kprobes: Prohibit probing on optimized_callback
ARM: 8769/1: kprobes: Fix to use get_kprobe_ctlblk after irq-disabed
tick/broadcast: Use for_each_cpu() specially on UP kernels
ARM: 8771/1: kprobes: Prohibit kprobes on do_undefinstr
efi: Avoid potential crashes, fix the 'struct efi_pci_io_protocol_32' definition for mixed mode
s390: remove indirect branch from do_softirq_own_stack
s390/qdio: don't release memory in qdio_setup_irq()
s390/cpum_sf: ensure sample frequency of perf event attributes is non-zero
s390/qdio: fix access to uninitialized qdio_q fields
mm: don't allow deferred pages with NEED_PER_CPU_KM
powerpc/powernv: Fix NVRAM sleep in invalid context when crashing
procfs: fix pthread cross-thread naming if !PR_DUMPABLE
proc read mm's {arg,env}_{start,end} with mmap semaphore taken.
tracing/x86/xen: Remove zero data size trace events trace_xen_mmu_flush_tlb{_all}
cpufreq: intel_pstate: Enable HWP by default
signals: avoid unnecessary taking of sighand->siglock
mm: filemap: avoid unnecessary calls to lock_page when waiting for IO to complete during a read
mm: filemap: remove redundant code in do_read_cache_page
proc: meminfo: estimate available memory more conservatively
vmscan: do not force-scan file lru if its absolute size is small
powerpc: Don't preempt_disable() in show_cpuinfo()
cpuidle: coupled: remove unused define cpuidle_coupled_lock
powerpc/powernv: remove FW_FEATURE_OPALv3 and just use FW_FEATURE_OPAL
powerpc/powernv: Remove OPALv2 firmware define and references
powerpc/powernv: panic() on OPAL < V3
spi: pxa2xx: Allow 64-bit DMA
ALSA: control: fix a redundant-copy issue
ALSA: hda: Add Lenovo C50 All in one to the power_save blacklist
ALSA: usb: mixer: volume quirk for CM102-A+/102S+
usbip: usbip_host: fix bad unlock balance during stub_probe()
usbip: usbip_host: fix NULL-ptr deref and use-after-free errors
usbip: usbip_host: run rebind from exit when module is removed
usbip: usbip_host: delete device from busid_table after rebind
usbip: usbip_host: refine probe and disconnect debug msgs to be useful
kernel/exit.c: avoid undefined behaviour when calling wait4()
futex: futex_wake_op, fix sign_extend32 sign bits
pipe: cap initial pipe capacity according to pipe-max-size limit
l2tp: revert "l2tp: fix missing print session offset info"
Revert "ARM: dts: imx6qdl-wandboard: Fix audio channel swap"
lockd: lost rollback of set_grace_period() in lockd_down_net()
xfrm: fix xfrm_do_migrate() with AEAD e.g(AES-GCM)
futex: Remove duplicated code and fix undefined behaviour
futex: Remove unnecessary warning from get_futex_key
arm64: Add work around for Arm Cortex-A55 Erratum 1024718
arm64: introduce mov_q macro to move a constant into a 64-bit register
audit: move calcs after alloc and check when logging set loginuid
ALSA: timer: Call notifier in the same spinlock
sctp: delay the authentication for the duplicated cookie-echo chunk
sctp: fix the issue that the cookie-ack with auth can't get processed
tcp: ignore Fast Open on repair mode
bonding: do not allow rlb updates to invalid mac
tg3: Fix vunmap() BUG_ON() triggered from tg3_free_consistent().
sctp: use the old asoc when making the cookie-ack chunk in dupcook_d
sctp: handle two v4 addrs comparison in sctp_inet6_cmp_addr
r8169: fix powering up RTL8168h
qmi_wwan: do not steal interfaces from class drivers
openvswitch: Don't swap table in nlattr_set() after OVS_ATTR_NESTED is found
net: support compat 64-bit time in {s,g}etsockopt
net_sched: fq: take care of throttled flows before reuse
net/mlx4_en: Verify coalescing parameters are in range
net: ethernet: sun: niu set correct packet size in skb
llc: better deal with too small mtu
ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg
dccp: fix tasklet usage
bridge: check iface upper dev when setting master via ioctl
8139too: Use disable_irq_nosync() in rtl8139_poll_controller()
BACKPORT, FROMLIST: fscrypt: add Speck128/256 support
cgroup: Disable IRQs while holding css_set_lock
Revert "cgroup: Disable IRQs while holding css_set_lock"
cgroup: Disable IRQs while holding css_set_lock
ANDROID: proc: fix undefined behavior in proc_uid_base_readdir
x86: vdso: Fix leaky vdso linker with CC=clang.
ANDROID: build: cuttlefish: Upgrade clang to newer version.
ANDROID: build: cuttlefish: Upgrade clang to newer version.
ANDROID: build: cuttlefish: Fix path to clang.
UPSTREAM: dm bufio: avoid sleeping while holding the dm_bufio lock
ANDROID: sdcardfs: Don't d_drop in d_revalidate
Conflicts:
arch/arm64/include/asm/cputype.h
fs/ext4/crypto.c
fs/ext4/ext4.h
kernel/cgroup.c
mm/vmscan.c
Change-Id: Ic10c5722b6439af1cf423fd949c493f786764d7e
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
Call trace:
[<ffffff9203a8d7a8>] dump_backtrace+0x0/0x428
[<ffffff9203a8dbf8>] show_stack+0x28/0x38
[<ffffff920409bfb8>] dump_stack+0xd4/0x124
[<ffffff9203d187e8>] print_address_description+0x68/0x258
[<ffffff9203d18c00>] kasan_report.part.2+0x228/0x2f0
[<ffffff9203d1927c>] kasan_report+0x5c/0x70
[<ffffff9203d1776c>] check_memory_region+0x12c/0x1c0
[<ffffff9203d17cdc>] memcpy+0x34/0x68
[<ffffff9203d75348>] xattr_getsecurity+0xe0/0x160
[<ffffff9203d75490>] vfs_getxattr+0xc8/0x120
[<ffffff9203d75d68>] getxattr+0x100/0x2c8
[<ffffff9203d76fb4>] SyS_fgetxattr+0x64/0xa0
[<ffffff9203a83f70>] el0_svc_naked+0x24/0x28
If user get root access and calls security.selinux setxattr() with an
embedded NUL on a file and then if some process performs a getxattr()
on that file with a length greater than the actual length of the string,
it would result in a panic.
To fix this, add the actual length of the string to the security context
instead of the length passed by the userspace process.
Change-Id: Ie0b8bfc7c96bc12282b955fb3adf41b3c2d011cd
Signed-off-by: Sachin Grover <sgrover@codeaurora.org>
AVI Infoframe provides the aspect ratio and video
identification code information. Add support to read
this from ADV7481 registers and to return it to user space
through an ioctl call.
Change-Id: Ia64fbc736b548633b34a9bd96f7a78700afb3db5
Signed-off-by: Suprith Malligere Shankaregowda <supgow@codeaurora.org>
This reverts commit 33cebc976c which is
03080e5ec727 ("vti4: Don't override MTU passed on link creation via
IFLA_MTU") upstream as it causes test failures.
This commit should not have been backported to anything older than 4.16,
despite what the changelog said as the mtu must be set in older kernels,
unlike is needed in 4.16 and newer.
Thanks to Alistair Strachan for the debugging help figuring this out,
and for 'git bisect' for making my life a whole lot easier.
Cc: Alistair Strachan <astrachan@google.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 33cebc976c which is
03080e5ec727 ("vti4: Don't override MTU passed on link creation via
IFLA_MTU") upstream as it causes test failures.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Close the open hab socket after receiving an error status from
the hab.
Change-Id: Ia56c7ce49d0e61661c9f133d35540e48f3707e01
Signed-off-by: Amit Blay <ablay@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=ogZQ
-----END PGP SIGNATURE-----
Merge 4.4.134 into android-4.4
Changes in 4.4.134
MIPS: ptrace: Expose FIR register through FP regset
MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs
KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable"
affs_lookup(): close a race with affs_remove_link()
aio: fix io_destroy(2) vs. lookup_ioctx() race
ALSA: timer: Fix pause event notification
mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register
libata: Blacklist some Sandisk SSDs for NCQ
libata: blacklist Micron 500IT SSD with MU01 firmware
xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent
Revert "ipc/shm: Fix shmat mmap nil-page protection"
ipc/shm: fix shmat() nil address after round-down when remapping
kasan: fix memory hotplug during boot
kernel/sys.c: fix potential Spectre v1 issue
kernel/signal.c: avoid undefined behaviour in kill_something_info
xfs: remove racy hasattr check from attr ops
do d_instantiate/unlock_new_inode combinations safely
firewire-ohci: work around oversized DMA reads on JMicron controllers
NFSv4: always set NFS_LOCK_LOST when a lock is lost.
ALSA: hda - Use IS_REACHABLE() for dependency on input
ASoC: au1x: Fix timeout tests in au1xac97c_ac97_read()
kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl
tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account
PCI: Add function 1 DMA alias quirk for Marvell 9128
tools lib traceevent: Simplify pointer print logic and fix %pF
perf callchain: Fix attr.sample_max_stack setting
tools lib traceevent: Fix get_field_str() for dynamic strings
dm thin: fix documentation relative to low water mark threshold
nfs: Do not convert nfs_idmap_cache_timeout to jiffies
watchdog: sp5100_tco: Fix watchdog disable bit
kconfig: Don't leak main menus during parsing
kconfig: Fix automatic menu creation mem leak
kconfig: Fix expr_free() E_NOT leak
mac80211_hwsim: fix possible memory leak in hwsim_new_radio_nl()
ipmi/powernv: Fix error return code in ipmi_powernv_probe()
Btrfs: set plug for fsync
btrfs: Fix out of bounds access in btrfs_search_slot
Btrfs: fix scrub to repair raid6 corruption
scsi: fas216: fix sense buffer initialization
HID: roccat: prevent an out of bounds read in kovaplus_profile_activated()
jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes
powerpc/numa: Ensure nodes initialized for hotplug
RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure
ntb_transport: Fix bug with max_mw_size parameter
ocfs2: return -EROFS to mount.ocfs2 if inode block is invalid
ocfs2/acl: use 'ip_xattr_sem' to protect getting extended attribute
ocfs2: return error when we attempt to access a dirty bh in jbd2
mm/mempolicy: fix the check of nodemask from user
mm/mempolicy: add nodes_empty check in SYSC_migrate_pages
asm-generic: provide generic_pmdp_establish()
mm: pin address_space before dereferencing it while isolating an LRU page
IB/ipoib: Fix for potential no-carrier state
x86/power: Fix swsusp_arch_resume prototype
firmware: dmi_scan: Fix handling of empty DMI strings
ACPI: processor_perflib: Do not send _PPC change notification if not ready
bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y
MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS
xen-netfront: Fix race between device setup and open
xen/grant-table: Use put_page instead of free_page
RDS: IB: Fix null pointer issue
arm64: spinlock: Fix theoretical trylock() A-B-A with LSE atomics
proc: fix /proc/*/map_files lookup
cifs: silence compiler warnings showing up with gcc-8.0.0
bcache: properly set task state in bch_writeback_thread()
bcache: fix for allocator and register thread race
bcache: fix for data collapse after re-attaching an attached device
bcache: return attach error when no cache set exist
tools/libbpf: handle issues with bpf ELF objects containing .eh_frames
locking/qspinlock: Ensure node->count is updated before initialising node
irqchip/gic-v3: Change pr_debug message to pr_devel
scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
scsi: sym53c8xx_2: iterator underflow in sym_getsync()
scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()
scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
ARC: Fix malformed ARC_EMUL_UNALIGNED default
usb: gadget: f_uac2: fix bFirstInterface in composite gadget
usb: gadget: fsl_udc_core: fix ep valid checks
usb: dwc2: Fix dwc2_hsotg_core_init_disconnected()
selftests: memfd: add config fragment for fuse
scsi: storvsc: Increase cmd_per_lun for higher speed devices
scsi: aacraid: fix shutdown crash when init fails
scsi: qla4xxx: skip error recovery in case of register disconnect.
ARM: OMAP2+: timer: fix a kmemleak caused in omap_get_timer_dt
ARM: OMAP3: Fix prm wake interrupt for resume
ARM: OMAP1: clock: Fix debugfs_create_*() usage
NFC: llcp: Limit size of SDP URI
mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
md raid10: fix NULL deference in handle_write_completed()
drm/exynos: fix comparison to bitshift when dealing with a mask
usb: musb: fix enumeration after resume
locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()
md: raid5: avoid string overflow warning
kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE
powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access
s390/cio: fix return code after missing interrupt
s390/cio: clear timer when terminating driver I/O
ARM: OMAP: Fix dmtimer init for omap1
smsc75xx: fix smsc75xx_set_features()
regulatory: add NUL to request alpha2
locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs
x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations
media: dmxdev: fix error code for invalid ioctls
md/raid1: fix NULL pointer dereference
batman-adv: fix packet checksum in receive path
batman-adv: invalidate checksum on fragment reassembly
netfilter: ebtables: convert BUG_ONs to WARN_ONs
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
clocksource/drivers/fsl_ftm_timer: Fix error return checking
r8152: fix tx packets accounting
virtio-gpu: fix ioctl and expose the fixed status to userspace.
dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3
bcache: fix kcrashes with fio in RAID5 backend dev
sit: fix IFLA_MTU ignored on NEWLINK
gianfar: Fix Rx byte accounting for ndev stats
net/tcp/illinois: replace broken algorithm reference link
xen/pirq: fix error path cleanup when binding MSIs
Btrfs: send, fix issuing write op when processing hole in no data mode
selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable
KVM: PPC: Book3S HV: Fix VRMA initialization with 2MB or 1GB memory backing
watchdog: f71808e_wdt: Fix magic close handling
e1000e: Fix check_for_link return value with autoneg off
e1000e: allocate ring descriptors with dma_zalloc_coherent
usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM
scsi: sd: Keep disk read-only when re-reading partition
fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper().
xen: xenbus: use put_device() instead of kfree()
USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
netfilter: ebtables: fix erroneous reject of last rule
bnxt_en: Check valid VNIC ID in bnxt_hwrm_vnic_set_tpa().
workqueue: use put_device() instead of kfree()
ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu
sunvnet: does not support GSO for sctp
net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off
batman-adv: fix header size check in batadv_dbg_arp()
vti4: Don't count header length twice on tunnel setup
vti4: Don't override MTU passed on link creation via IFLA_MTU
perf/cgroup: Fix child event counting bug
RDMA/ucma: Correct option size check using optlen
mm/mempolicy.c: avoid use uninitialized preferred_node
selftests: ftrace: Add probe event argument syntax testcase
selftests: ftrace: Add a testcase for string type with kprobe_event
selftests: ftrace: Add a testcase for probepoint
batman-adv: fix multicast-via-unicast transmission with AP isolation
batman-adv: fix packet loss for broadcasted DHCP packets to a server
ARM: 8748/1: mm: Define vdso_start, vdso_end as array
net: qmi_wwan: add BroadMobi BM806U 2020:2033
net/usb/qmi_wwan.c: Add USB id for lt4120 modem
net-usb: add qmi_wwan if on lte modem wistron neweb d18q1
llc: properly handle dev_queue_xmit() return value
mm/kmemleak.c: wait for scan completion before disabling free
net: Fix untag for vlan packets without ethernet header
net: mvneta: fix enable of all initialized RXQs
sh: fix debug trap failure to process signals before return to user
x86/pgtable: Don't set huge PUD/PMD on non-leaf entries
fs/proc/proc_sysctl.c: fix potential page fault while unregistering sysctl table
swap: divide-by-zero when zero length swap file on ssd
sr: get/drop reference to device in revalidate and check_events
Force log to disk before reading the AGF during a fstrim
cpufreq: CPPC: Initialize shared perf capabilities of CPUs
scsi: aacraid: Insure command thread is not recursively stopped
dp83640: Ensure against premature access to PHY registers after reset
mm/ksm: fix interaction with THP
mm: fix races between address_space dereference and free in page_evicatable
Btrfs: bail out on error during replay_dir_deletes
Btrfs: fix NULL pointer dereference in log_dir_items
btrfs: Fix possible softlock on single core machines
ocfs2/dlm: don't handle migrate lockres if already in shutdown
sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning
KVM: VMX: raise internal error for exception during invalid protected mode state
fscache: Fix hanging wait on page discarded by writeback
sparc64: Make atomic_xchg() an inline function rather than a macro.
rtc: snvs: Fix usage of snvs_rtc_enable
net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
Bluetooth: btusb: Add USB ID 7392:a611 for Edimax EW-7611ULB
btrfs: tests/qgroup: Fix wrong tree backref level
Btrfs: fix copy_items() return value when logging an inode
btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers
xen/acpi: off by one in read_acpi_id()
ACPI: acpi_pad: Fix memory leak in power saving threads
powerpc/mpic: Check if cpu_possible() in mpic_physmask()
m68k: set dma and coherent masks for platform FEC ethernets
parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode
hwmon: (nct6775) Fix writing pwmX_mode
rtc: hctosys: Ensure system time doesn't overflow time_t
powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer
powerpc/perf: Fix kernel address leak via sampling registers
tools/thermal: tmon: fix for segfault
selftests: Print the test we're running to /dev/kmsg
net/mlx5: Protect from command bit overflow
ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)
ima: Fix Kconfig to select TPM 2.0 CRB interface
ima: Fallback to the builtin hash algorithm
virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS
arm: dts: socfpga: fix GIC PPI warning
usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
cpufreq: cppc_cpufreq: Fix cppc_cpufreq_init() failure path
clk: Don't show the incorrect clock phase
zorro: Set up z->dev.dma_mask for the DMA API
bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set
ACPICA: Events: add a return on failure from acpi_hw_register_read
ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c
i2c: mv64xxx: Apply errata delay only in standard mode
KVM: lapic: stop advertising DIRECTED_EOI when in-kernel IOAPIC is in use
xhci: zero usb device slot_id member when disabling and freeing a xhci slot
MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset
PCI: Restore config space on runtime resume despite being unbound
ipmi_ssif: Fix kernel panic at msg_done_handler
usb: dwc2: Fix interval type issue
usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS
usb: gadget: ffs: Execute copy_to_user() with USER_DS set
powerpc: Add missing prototype for arch_irq_work_raise()
ASoC: topology: create TLV data for dapm widgets
perf/core: Fix perf_output_read_group()
hwmon: (pmbus/max8688) Accept negative page register values
hwmon: (pmbus/adm1275) Accept negative page register values
cdrom: do not call check_disk_change() inside cdrom_open()
gfs2: Fix fallocate chunk size
usb: gadget: udc: change comparison to bitshift when dealing with a mask
usb: gadget: composite: fix incorrect handling of OS desc requests
x86/devicetree: Initialize device tree before using it
x86/devicetree: Fix device IRQ settings in DT
ALSA: vmaster: Propagate slave error
media: cx23885: Override 888 ImpactVCBe crystal frequency
media: cx23885: Set subdev host data to clk_freq pointer
media: s3c-camif: fix out-of-bounds array access
dmaengine: pl330: fix a race condition in case of threaded irqs
media: em28xx: USB bulk packet size fix
clk: rockchip: Prevent calculating mmc phase if clock rate is zero
enic: enable rq before updating rq descriptors
hwrng: stm32 - add reset during probe
staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr
rtc: tx4939: avoid unintended sign extension on a 24 bit shift
serial: xuartps: Fix out-of-bounds access through DT alias
serial: samsung: Fix out-of-bounds access through serial port index
serial: mxs-auart: Fix out-of-bounds access through serial port index
serial: imx: Fix out-of-bounds access through serial port index
serial: fsl_lpuart: Fix out-of-bounds access through DT alias
serial: arc_uart: Fix out-of-bounds access through DT alias
PCI: Add function 1 DMA alias quirk for Marvell 88SE9220
udf: Provide saner default for invalid uid / gid
media: cx25821: prevent out-of-bounds read on array card
clk: samsung: s3c2410: Fix PLL rates
clk: samsung: exynos5260: Fix PLL rates
clk: samsung: exynos5433: Fix PLL rates
clk: samsung: exynos5250: Fix PLL rates
clk: samsung: exynos3250: Fix PLL rates
crypto: sunxi-ss - Add MODULE_ALIAS to sun4i-ss
audit: return on memory error to avoid null pointer dereference
MIPS: Octeon: Fix logging messages with spurious periods after newlines
drm/rockchip: Respect page offset for PRIME mmap calls
x86/apic: Set up through-local-APIC mode on the boot CPU if 'noapic' specified
perf tests: Use arch__compare_symbol_names to compare symbols
perf report: Fix memory corruption in --branch-history mode --branch-history
selftests/net: fixes psock_fanout eBPF test case
netlabel: If PF_INET6, check sk_buff ip header version
scsi: lpfc: Fix issue_lip if link is disabled
scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing
scsi: lpfc: Fix frequency of Release WQE CQEs
regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'
ASoC: samsung: i2s: Ensure the RCLK rate is properly determined
Bluetooth: btusb: Add device ID for RTL8822BE
kdb: make "mdr" command repeat
s390/ftrace: use expoline for indirect branches
Linux 4.4.134
Change-Id: Iababaf9b89bc8d0437b95e1368d8b0a9126a178c
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
New cpu speed bin of 4 is added to support 1.9/1.8GHz.
Change-Id: Ic0dffc7c46e82748bf9f40de7f478ec073142dd1
Signed-off-by: Taniya Das <tdas@codeaurora.org>
On SDM660 there is a new frequency requirement of 585MHz, so add support
for the same.
Change-Id: I9b55b18d6befdc8f5a7d9dac6bcb832eda338497
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Fix the multiple definition issue of msm_timer_get_sclk_ticks
when CONFIG_MSM_BOOT_STATS is disabled.
Change-Id: Id2c263c48cec038be4354894fa57b203a5f764c6
Signed-off-by: Zhiqiang Tu <ztu@codeaurora.org>
commit 23a4d7fd34856da8218c4cfc23dba7a6ec0a423a upstream.
The return from the ftrace_stub, _mcount, ftrace_caller and
return_to_handler functions is done with "br %r14" and "br %r1".
These are indirect branches as well and need to use execute
trampolines for CONFIG_EXPOLINE=y.
The ftrace_caller function is a special case as it returns to the
start of a function and may only use %r0 and %r1. For a pre z10
machine the standard execute trampoline uses a LARL + EX to do
this, but this requires *two* registers in the range %r1..%r15.
To get around this the 'br %r1' located in the lowcore is used,
then the EX instruction does not need an address register.
But the lowcore trick may only be used for pre z14 machines,
with noexec=on the mapping for the first page may not contain
instructions. The solution for that is an ALTERNATIVE in the
expoline THUNK generated by 'GEN_BR_THUNK %r1' to switch to
EXRL, this relies on the fact that a machine that supports
noexec=on has EXRL as well.
Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1e0ce03bf142454f38a5fc050bf4fd698d2d36d8 ]
The "mdr" command should repeat (continue) when only Enter/Return
is pressed, so make it do so.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fed03fe7e55b7dc16077f672bd9d7bbe92b3a691 ]
The Asus Z370-I contains a Realtek RTL8822BE device with an associated
BT chip using a USB ID of 0b05:185c. This device is added to the driver.
Signed-off-by: Hon Weng Chong <honwchong@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 647d04f8e07afc7c3b7a42b3ee01a8b28db29631 ]
If the RCLK mux clock configuration is specified in DT and no set_sysclk()
callback is used in the sound card driver the sclk_srcrate field will remain
set to 0, leading to an incorrect PSR divider setting.
To fix this the frequency value is retrieved from the CLK_I2S_RCLK_SRC clock,
so the actual RCLK mux selection is taken into account.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 30966861a7a2051457be8c49466887d78cc47e97 ]
If an unlikely failure in 'of_get_regulator_init_data()' occurs, we must
release the reference on the current 'child' node before returning.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 04673e38f56b30cd39b1fa0f386137d818b17781 ]
The driver controls when the hardware sends completions that communicate
consumption of elements from the WQ. This is done by setting a WQEC bit
on a WQE.
The current driver sets it on every Nth WQE posting. However, the driver
isn't clearing the bit if the WQE is reused. Thus, if the queue depth
isn't evenly divisible by N, with enough time, it can be set on every
element, creating a lot of overhead and risking CQ full conditions.
Correct by clearing the bit when not setting it on an Nth element.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 161df4f09987ae2e9f0f97f0b38eee298b4a39ff ]
During link bounce testing in a point-to-point topology, the host may
enter a soft lockup on the lpfc_worker thread:
Call Trace:
lpfc_work_done+0x1f3/0x1390 [lpfc]
lpfc_do_work+0x16f/0x180 [lpfc]
kthread+0xc7/0xe0
ret_from_fork+0x3f/0x70
The driver was simultaneously setting a combination of flags that caused
lpfc_do_work()to effectively spin between slow path work and new event
data, causing the lockup.
Ensure in the typical wq completions, that new event data flags are set
if the slow path flag is running. The slow path will eventually
reschedule the wq handling.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2289e9598dde9705400559ca2606fb8c145c34f0 ]
The driver ignored checks on whether the link should be kept
administratively down after a link bounce. Correct the checks.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 213d7f94775322ba44e0bbb55ec6946e9de88cea ]
When resolving a fallback label, check the sk_buff version as it
is possible (e.g. SCTP) to have family = PF_INET6 while
receiving ip_hdr(skb)->version = 4.
Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ddd0010392d9cbcb95b53d11b7cafc67b373ab56 ]
eBPF test fails due to verifier failure because log_buf is too small.
Fixed by increasing log_buf size
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e3ebaa465136ecfedf9c6f4671df02bf625f8125 ]
Jin Yao reported memory corrupton in perf report with
branch info used for stack trace:
> Following command lines will cause perf crash.
> perf record -j call -g -a <application>
> perf report --branch-history
>
> *** Error in `perf': double free or corruption (!prev): 0x00000000104aa040 ***
> ======= Backtrace: =========
> /lib/x86_64-linux-gnu/libc.so.6(+0x77725)[0x7f6b37254725]
> /lib/x86_64-linux-gnu/libc.so.6(+0x7ff4a)[0x7f6b3725cf4a]
> /lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f6b37260abc]
> perf[0x51b914]
> perf(hist_entry_iter__add+0x1e5)[0x51f305]
> perf[0x43cf01]
> perf[0x4fa3bf]
> perf[0x4fa923]
> perf[0x4fd396]
> perf[0x4f9614]
> perf(perf_session__process_events+0x89e)[0x4fc38e]
> perf(cmd_report+0x15d2)[0x43f202]
> perf[0x4a059f]
> perf(main+0x631)[0x427b71]
> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f6b371fd830]
> perf(_start+0x29)[0x427d89]
For the cumulative output, we allocate the he_cache array based on the
--max-stack option value and populate it with data from 'callchain_cursor'.
The --max-stack option value does not ensure now the limit for number of
callchain_cursor nodes, so the cumulative iter code will allocate smaller array
than it's actually needed and cause above corruption.
I think the --max-stack limit does not apply here anyway, because we add
callchain data as normal hist entries, while the --max-stack control the limit
of single entry callchain depth.
Using the callchain_cursor.nr as he_cache array count to fix this. Also
removing struct hist_entry_iter::max_stack, because there's no longer any use
for it.
We need more fixes to ensure that the branch stack code follows properly the
logic of --max-stack, which is not the case at the moment.
Original-patch-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180216123619.GA9945@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ab6e9a99345131cd8e54268d1d0dc04a33f7ed11 ]
The symbol search called by machine__find_kernel_symbol_by_name is using
internally arch__compare_symbol_names function to compare 2 symbol
names, because different archs have different ways of comparing symbols.
Mostly for skipping '.' prefixes and similar.
In test 1 when we try to find matching symbols in kallsyms and vmlinux,
by address and by symbol name. When either is found we compare the pair
symbol names by simple strcmp, which is not good enough for reasons
explained in previous paragraph.
On powerpc this can cause lockup, because even thought we found the
pair, the compared names are different and don't match simple strcmp.
Following code path is executed, that leads to lockup:
- we find the pair in kallsyms by sym->start
next_pair:
- we compare the names and it fails
- we find the pair by sym->name
- the pair addresses match so we call goto next_pair
because we assume the names match in this case
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 031b84c407 ("perf probe ppc: Enable matching against dot symbols automatically")
Link: http://lkml.kernel.org/r/20180215122635.24029-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bee3204ec3c49f6f53add9c3962c9012a5c036fa ]
Currently the kdump kernel becomes very slow if 'noapic' is specified.
Normal kernel doesn't have this bug.
Kernel parameter 'noapic' is used to disable IO-APIC in system for
testing or special purpose. Here the root cause is that in kdump
kernel LAPIC is disabled since commit:
522e664644 ("x86/apic: Disable I/O APIC before shutdown of the local APIC")
In this case we need set up through-local-APIC on boot CPU in
setup_local_APIC().
In normal kernel the legacy irq mode is enabled by the BIOS. If
it is virtual wire mode, the local-APIC has been enabled and set as
through-local-APIC.
Though we fixed the regression introduced by commit 522e664644,
to further improve robustness set up the through-local-APIC mode
explicitly, do not rely on the default boot IRQ mode.
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: douly.fnst@cn.fujitsu.com
Cc: joro@8bytes.org
Cc: prarit@redhat.com
Cc: uobergfe@redhat.com
Link: http://lkml.kernel.org/r/20180214054656.3780-7-bhe@redhat.com
[ Rewrote the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 57de50af162b67612da99207b061ade3239e57db ]
When mapping external DMA-bufs through the PRIME mmap call, we might be
given an offset which has to be respected. However for the internal DRM
GEM mmap path, we have to ignore the fake mmap offset used to identify
the buffer only. Currently the code always zeroes out vma->vm_pgoff,
which breaks the former.
This patch fixes the problem by moving the vm_pgoff assignment to a
function that is used only for GEM mmap path, so that the PRIME path
retains the original offset.
Cc: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Ørjan Eide <orjan.eide@arm.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130202913.28724-4-thierry.escande@collabora.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit db6775ca6e0353d2618ca7d5e210fc36ad43bbd4 ]
Using a period after a newline causes bad output.
Fixes: 64b139f97c ("MIPS: OCTEON: irq: add CIB and other fixes")
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17886/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 23138ead270045f1b3e912e667967b6094244999 ]
If there is a memory allocation error when trying to change an audit
kernel feature value, the ignored allocation error will trigger a NULL
pointer dereference oops on subsequent use of that pointer. Return
instead.
Passes audit-testsuite.
See: https://github.com/linux-audit/audit-kernel/issues/76
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: not necessary (other funcs check for NULL), but a good practice]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7c73cf4cc2ac16465f5102437dc0a12d66671bd6 ]
The MODULE_ALIAS is required to enable the sun4i-ss driver to load
automatically when built at a module. Tested on a Cubietruck.
Fixes: 6298e94821 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a8321e7887410a2b2e80ab89d1ef7b30562658ea ]
Rates declared in PLL rate tables should match exactly rates calculated
from PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.
To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.
In this patch an erroneous P value for 74176002 output frequency is also
corrected.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2ac051eeabaa411ef89ae7cd5bb8e60cb41ad780 ]
Rates declared in PLL rate tables should match exactly rates calculated
from PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.
To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ab0447845cffc0fd752df2ccd6b4e34006000ce4 ]
Rates declared in PLL rate tables should match exactly rates calculated from
the PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.
To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cdb68fbd4e7962be742c4f29475220c5bf28d8a5 ]
Rates declared in PLL rate tables should match exactly rates calculated from
the PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.
To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 179db533c08431f509a3823077549773d519358b ]
Rates declared in PLL rate tables should match exactly rates calculated from
the PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.
To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 67300abdbe9f1717532aaf4e037222762716d0f6 ]
Currently an out of range dev->nr is detected by just reporting the
issue and later on an out-of-bounds read on array card occurs because
of this. Fix this by checking the upper range of dev->nr with the size
of array card (removes the hard coded size), move this check earlier
and also exit with the error -ENOSYS to avoid the later out-of-bounds
array read.
Detected by CoverityScan, CID#711191 ("Out-of-bounds-read")
Fixes: commit 02b20b0b4c ("V4L/DVB (12730): Add conexant cx25821 driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: %ld -> %zd]
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 116e5258e4115aca0c64ac0bf40ded3b353ed626 ]
Currently when UDF filesystem is recorded without uid / gid (ids are set
to -1), we will assign INVALID_[UG]ID to vfs inode unless user uses uid=
and gid= mount options. In such case filesystem could not be modified in
any way as VFS refuses to modify files with invalid ids (even by root).
This is confusing to users and not very useful default since such media
mode is generally used for removable media. Use overflow[ug]id instead
so that at least root can modify the filesystem.
Reported-by: Steve Kenton <skenton@ou.edu>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f9f5786987e81d166c60833edcb7d1836aa16944 ]
The arc_uart_ports[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.
Fix this by adding a range check.
Note that the array size is defined by a Kconfig symbol
(CONFIG_SERIAL_ARC_NR_PORTS), so this can even be triggered using a
legitimate DTB.
Fixes: ea28fd56fc ("serial/arc-uart: switch to devicetree based probing")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ffab87fdecc655cc676f8be8dd1a2c5e22bd6d47 ]
The lpuart_ports[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.
Fix this by adding a range check.
Fixes: c9e2e946fb ("tty: serial: add Freescale lpuart driver support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5673444821406dda5fc25e4b52aca419f8065a19 ]
The imx_ports[] array is indexed using a value derived from the
"serialN" alias in DT, or from platform data, which may lead to an
out-of-bounds access.
Fix this by adding a range check.
Fixes: ff05967a07 ("serial/imx: add of_alias_get_id() reference back")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dd345a31bfdec350d2593e6de5964e55c7f19c76 ]
The auart_port[] array is indexed using a value derived from the
"serialN" alias in DT, or from platform data, which may lead to an
out-of-bounds access.
Fix this by adding a range check.
Fixes: 1ea6607d4c ("serial: mxs-auart: Allow device tree probing")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
