While marshaling an RPC/RDMA request, the inline_{rsize,wsize}
settings determine whether an inline request is used, or whether
read or write chunks lists are built. The current default value of
these settings is 1024. Any RPC request smaller than 1024 bytes is
sent to the NFS server completely inline.
rpcrdma_buffer_create() allocates and pre-registers a set of RPC
buffers for each transport instance, also based on the inline rsize
and wsize settings.
RPC/RDMA requests and replies are built in these buffers. However,
if an RPC/RDMA request is expected to be larger than 1024, a buffer
has to be allocated and registered for that RPC, and deregistered
and released when the RPC is complete. This is known has a
"hardway allocation."
Since the introduction of NFSv4, the size of RPC requests has become
larger, and hardway allocations are thus more frequent. Hardway
allocations are significant overhead, and they waste the existing
RPC buffers pre-allocated by rpcrdma_buffer_create().
We'd like fewer hardway allocations.
Increasing the size of the pre-registered buffers is the most direct
way to do this. However, a blanket increase of the inline thresholds
has interoperability consequences.
On my 64-bit system, rpcrdma_buffer_create() requests roughly 7000
bytes for each RPC request buffer, using kmalloc(). Due to internal
fragmentation, this wastes nearly 1200 bytes because kmalloc()
already returns an 8192-byte piece of memory for a 7000-byte
allocation request, though the extra space remains unused.
So let's round up the size of the pre-allocated buffers, and make
use of the unused space in the kmalloc'd memory.
This change reduces the amount of hardway allocated memory for an
NFSv4 general connectathon run from 1322092 to 9472 bytes (99%).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Sagi Grimberg <sagig@dev.mellanox.co.il> points out that a steady
stream of CQ events could starve other work because of the boundless
loop pooling in rpcrdma_{send,recv}_poll().
Instead of a (potentially infinite) while loop, return after
collecting a budgeted number of completions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Change the completion handlers to grab up to 16 items per
ib_poll_cq() call. No extra ib_poll_cq() is needed if fewer than 16
items are returned.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Skip the ib_poll_cq() after re-arming, if the provider knows there
are no additional items waiting. (Have a look at commit ed23a727 for
more details).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The current CQ handler uses the ib_wc.opcode field to distinguish
between event types. However, the contents of that field are not
reliable if the completion status is not IB_WC_SUCCESS.
When an error completion occurs on a send event, the CQ handler
schedules a tasklet with something that is not a struct rpcrdma_rep.
This is never correct behavior, and sometimes it results in a panic.
To resolve this issue, split the completion queue into a send CQ and
a receive CQ. The send CQ handler now handles only struct rpcrdma_mw
wr_id's, and the receive CQ handler now handles only struct
rpcrdma_rep wr_id's.
Fix suggested by Shirley Ma <shirley.ma@oracle.com>
Reported-by: Rafael Reiter <rafael.reiter@ims.co.at>
Fixes: 5c635e09ce
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=73211
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Klemens Senn <klemens.senn@ims.co.at>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: rpcrdma_ep_destroy() returns a value that is used
only to print a debugging message. rpcrdma_ep_destroy() already
prints debugging messages in all error cases.
Make rpcrdma_ep_destroy() return void instead.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: All remaining callers of rpcrdma_deregister_external()
pass NULL as the last argument, so remove that argument.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the selected memory registration mode is not supported by the
underlying provider/HCA, the NFS mount command reports that there was
an invalid mount option, and fails. This is misleading.
Reporting a problem allocating memory is a lot closer to the truth.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
An audit of in-kernel RDMA providers that do not support the FRMR
memory registration shows that several of them support MTHCAFMR.
Prefer MTHCAFMR when FRMR is not supported.
If MTHCAFMR is not supported, only then choose ALLPHYSICAL.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
All kernel RDMA providers except amso1100 support either MTHCAFMR
or FRMR, both of which are faster than REGISTER. amso1100 can
continue to use ALLPHYSICAL.
The only other ULP consumer in the kernel that uses the reg_phys_mr
verb is Lustre.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The MEMWINDOWS and MEMWINDOWS_ASYNC memory registration modes were
intended as stop-gap modes before the introduction of FRMR. They
are now considered obsolete.
MEMWINDOWS_ASYNC is also considered unsafe because it can leave
client memory registered and exposed for an indeterminant time after
each I/O.
At this point, the MEMWINDOWS modes add needless complexity, so
remove them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: This memory registration mode is slow and was never
meant for use in production environments. Remove it to reduce
implementation complexity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
An IB provider can invoke rpcrdma_conn_func() in an IRQ context,
thus rpcrdma_conn_func() cannot be allowed to directly invoke
generic RPC functions like xprt_wake_pending_tasks().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Two memory region leaks were found during testing:
1. rpcrdma_buffer_create: While allocating RPCRDMA_FRMR's
ib_alloc_fast_reg_mr is called and then ib_alloc_fast_reg_page_list is
called. If ib_alloc_fast_reg_page_list returns an error it bails out of
the routine dropping the last ib_alloc_fast_reg_mr frmr region creating a
memory leak. Added code to dereg the last frmr if
ib_alloc_fast_reg_page_list fails.
2. rpcrdma_buffer_destroy: While cleaning up, the routine will only free
the MR's on the rb_mws list if there are rb_send_bufs present. However, in
rpcrdma_buffer_create while the rb_mws list is being built if one of the MR
allocation requests fail after some MR's have been allocated on the rb_mws
list the routine never gets to create any rb_send_bufs but instead jumps to
the rpcrdma_buffer_destroy routine which will never free the MR's on rb_mws
list because the rb_send_bufs were never created. This leaks all the MR's
on the rb_mws list that were created prior to one of the MR allocations
failing.
Issue(2) was seen during testing. Our adapter had a finite number of MR's
available and we created enough connections to where we saw an MR
allocation failure on our Nth NFS connection request. After the kernel
cleaned up the resources it had allocated for the Nth connection we noticed
that FMR's had been leaked due to the coding error described above.
Issue(1) was seen during a code review while debugging issue(2).
Signed-off-by: Allen Andrews <allen.andrews@emulex.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some rdma devices don't support a fast register page list depth of
at least RPCRDMA_MAX_DATA_SEGS. So xprtrdma needs to chunk its fast
register regions according to the minimum of the device max supported
depth or RPCRDMA_MAX_DATA_SEGS.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When debugging, rpc prints messages from dprintk(KERN_WARNING ...)
with "^A4" prefixed,
[ 2780.339988] ^A4nfsd: connect from unprivileged port: 127.0.0.1, port=35316
Trond tells,
> dprintk != printk. We have NEVER supported dprintk(KERN_WARNING...)
This patch removes using of dprintk with KERN_WARNING.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RPC_MAX_AUTH_SIZE is scattered around several places. Better to set it
once in the auth code, where this kind of estimate should be made. And
while we're at it we can leave it zero when we're not using krb5i or
krb5p.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After this we can handle for example getattr of very large ACLs.
Read, readdir, readlink are still special cases with their own limits.
Also we can't handle a new operation starting close to the end of a
page.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This will be used in the server side in a few cases:
- when certain operations (read, readdir, readlink) fail after
encoding a partial response.
- when we run out of space after encoding a partial response.
- in readlink, where we initially reserve PAGE_SIZE bytes for
data, then truncate to the actual size.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Setting sk_no_check to UDP_CSUM_NORCV seems to have no effect.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an incoming NFS request is coming from the local host, then
nfsd will need to perform some special handling. So detect that
possibility and make the source visible in rq_local.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the accept() call fails, we need to put the module reference.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An NFS/RDMA client's source port is meaningless for RDMA transports.
The transport layer typically sets the source port value on the
connection to a random ephemeral port.
Currently, NFS server administrators must specify the "insecure"
export option to enable clients to access exports via RDMA.
But this means NFS clients can access such an export via IP using an
ephemeral port, which may not be desirable.
This patch eliminates the need to specify the "insecure" export
option to allow NFS/RDMA clients access to an export.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=250
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're not taking a reference in the case where _gss_mech_get_by_pseudoflavor
loops without finding the correct rpcsec_gss flavour, so why are we
releasing it?
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull yet more networking updates from David Miller:
1) Various fixes to the new Redpine Signals wireless driver, from
Fariya Fatima.
2) L2TP PPP connect code takes PMTU from the wrong socket, fix from
Dmitry Petukhov.
3) UFO and TSO packets differ in whether they include the protocol
header in gso_size, account for that in skb_gso_transport_seglen().
From Florian Westphal.
4) If VLAN untagging fails, we double free the SKB in the bridging
output path. From Toshiaki Makita.
5) Several call sites of sk->sk_data_ready() were referencing an SKB
just added to the socket receive queue in order to calculate the
second argument via skb->len. This is dangerous because the moment
the skb is added to the receive queue it can be consumed in another
context and freed up.
It turns out also that none of the sk->sk_data_ready()
implementations even care about this second argument.
So just kill it off and thus fix all these use-after-free bugs as a
side effect.
6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti.
7) pktgen needs to do locking properly for LLTX devices, from Daniel
Borkmann.
8) xen-netfront driver initializes TX array entries in RX loop :-) From
Vincenzo Maffione.
9) After refactoring, some tunnel drivers allow a tunnel to be
configured on top itself. Fix from Nicolas Dichtel.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
vti: don't allow to add the same tunnel twice
gre: don't allow to add the same tunnel twice
drivers: net: xen-netfront: fix array initialization bug
pktgen: be friendly to LLTX devices
r8152: check RTL8152_UNPLUG
net: sun4i-emac: add promiscuous support
net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
net: ipv6: Fix oif in TCP SYN+ACK route lookup.
drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts
drivers: net: cpsw: discard all packets received when interface is down
net: Fix use after free by removing length arg from sk_data_ready callbacks.
Drivers: net: hyperv: Address UDP checksum issues
Drivers: net: hyperv: Negotiate suitable ndis version for offload support
Drivers: net: hyperv: Allocate memory for all possible per-pecket information
bridge: Fix double free and memory leak around br_allowed_ingress
bonding: Remove debug_fs files when module init fails
i40evf: program RSS LUT correctly
i40evf: remove open-coded skb_cow_head
ixgb: remove open-coded skb_cow_head
igbvf: remove open-coded skb_cow_head
...
Several spots in the kernel perform a sequence like:
skb_queue_tail(&sk->s_receive_queue, skb);
sk->sk_data_ready(sk, skb->len);
But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up. So this skb->len access is potentially
to freed up memory.
Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.
And finally, no actual implementation of this callback actually uses
the length argument. And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.
So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.
Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull nfsd updates from Bruce Fields:
"Highlights:
- server-side nfs/rdma fixes from Jeff Layton and Tom Tucker
- xdr fixes (a larger xdr rewrite has been posted but I decided it
would be better to queue it up for 3.16).
- miscellaneous fixes and cleanup from all over (thanks especially to
Kinglong Mee)"
* 'for-3.15' of git://linux-nfs.org/~bfields/linux: (36 commits)
nfsd4: don't create unnecessary mask acl
nfsd: revert v2 half of "nfsd: don't return high mode bits"
nfsd4: fix memory leak in nfsd4_encode_fattr()
nfsd: check passed socket's net matches NFSd superblock's one
SUNRPC: Clear xpt_bc_xprt if xs_setup_bc_tcp failed
NFSD/SUNRPC: Check rpc_xprt out of xs_setup_bc_tcp
SUNRPC: New helper for creating client with rpc_xprt
NFSD: Free backchannel xprt in bc_destroy
NFSD: Clear wcc data between compound ops
nfsd: Don't return NFS4ERR_STALE_STATEID for NFSv4.1+
nfsd4: fix nfs4err_resource in 4.1 case
nfsd4: fix setclientid encode size
nfsd4: remove redundant check from nfsd4_check_resp_size
nfsd4: use more generous NFS4_ACL_MAX
nfsd4: minor nfsd4_replay_cache_entry cleanup
nfsd4: nfsd4_replay_cache_entry should be static
nfsd4: update comments with obsolete function name
rpc: Allow xdr_buf_subsegment to operate in-place
NFSD: Using free_conn free connection
SUNRPC: fix memory leak of peer addresses in XPRT
...
Highlights include:
- Stable fix for a use after free issue in the NFSv4.1 open code
- Fix the SUNRPC bi-directional RPC code to account for TCP segmentation
- Optimise usage of readdirplus when confronted with 'ls -l' situations
- Soft mount bugfixes
- NFS over RDMA bugfixes
- NFSv4 close locking fixes
- Various NFSv4.x client state management optimisations
- Rename/unlink code cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=weNx
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- Stable fix for a use after free issue in the NFSv4.1 open code
- Fix the SUNRPC bi-directional RPC code to account for TCP segmentation
- Optimise usage of readdirplus when confronted with 'ls -l' situations
- Soft mount bugfixes
- NFS over RDMA bugfixes
- NFSv4 close locking fixes
- Various NFSv4.x client state management optimisations
- Rename/unlink code cleanups"
* tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits)
nfs: pass string length to pr_notice message about readdir loops
NFSv4: Fix a use-after-free problem in open()
SUNRPC: rpc_restart_call/rpc_restart_call_prepare should clear task->tk_status
SUNRPC: Don't let rpc_delay() clobber non-timeout errors
SUNRPC: Ensure call_connect_status() deals correctly with SOFTCONN tasks
SUNRPC: Ensure call_status() deals correctly with SOFTCONN tasks
NFSv4: Ensure we respect soft mount timeouts during trunking discovery
NFSv4: Schedule recovery if nfs40_walk_client_list() is interrupted
NFS: advertise only supported callback netids
SUNRPC: remove KERN_INFO from dprintk() call sites
SUNRPC: Fix large reads on NFS/RDMA
NFS: Clean up: revert increase in READDIR RPC buffer max size
SUNRPC: Ensure that call_bind times out correctly
SUNRPC: Ensure that call_connect times out correctly
nfs: emit a fsnotify_nameremove call in sillyrename codepath
nfs: remove synchronous rename code
nfs: convert nfs_rename to use async_rename infrastructure
nfs: make nfs_async_rename non-static
nfs: abstract out code needed to complete a sillyrename
NFSv4: Clear the open state flags if the new stateid does not match
...
There could be a case, when NFSd file system is mounted in network, different
to socket's one, like below:
"ip netns exec" creates new network and mount namespace, which duplicates NFSd
mount point, created in init_net context. And thus NFS server stop in nested
network context leads to RPCBIND client destruction in init_net.
Then, on NFSd start in nested network context, rpc.nfsd process creates socket
in nested net and passes it into "write_ports", which leads to RPCBIND sockets
creation in init_net context because of the same reason (NFSd monut point was
created in init_net context). An attempt to register passed socket in nested
net leads to panic, because no RPCBIND client present in nexted network
namespace.
This patch add check that passed socket's net matches NFSd superblock's one.
And returns -EINVAL error to user psace otherwise.
v2: Put socket on exit.
Reported-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Don't move the assign of args->bc_xprt->xpt_bc_xprt out of xs_setup_bc_tcp,
because rpc_ping (which is in rpc_create) will using it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Besides checking rpc_xprt out of xs_setup_bc_tcp,
increase it's reference (it's important).
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Backchannel xprt isn't freed right now.
Free it in bc_destroy, and put the reference of THIS_MODULE.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow
xdr_buf_subsegment(&buf, &buf, base, len)
to modify an xdr_buf in-place.
Also, none of the callers need the iov_base of head or tail to be zeroed
out.
Also add documentation.
(As it turns out, I'm not really using this new guarantee, but it seems
a simple way to make this function a bit more robust.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Creating xprt failed after xs_format_peer_addresses,
sunrpc must free those memory of peer addresses in xprt.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The xdr_off value in dma_map_xdr gets passed to ib_dma_map_page as the
offset into the page to be mapped. This calculation does not correctly
take into account the case where the data starts at some offset into
the page. Increment the xdr_off by the page_base to ensure that it is
respected.
Cc: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are two entirely separate modules under xprtrdma/ and there's no
reason that enabling one should automatically enable the other. Add
config options for each one so they can be enabled/disabled separately.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The server regression was caused by the addition of rq_next_page
(afc59400d6). There were a few places that
were missed with the update of the rq_respages array.
Signed-off-by: Tom Tucker <tom@ogc.us>
Tested-by: Steve Wise <swise@ogc.us>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Mark functions as static in net/sunrpc/svc_xprt.c because they are not
used outside this file.
This eliminates the following warning in net/sunrpc/svc_xprt.c:
net/sunrpc/svc_xprt.c:574:5: warning: no previous prototype for ‘svc_alloc_arg’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:615:18: warning: no previous prototype for ‘svc_get_next_xprt’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:694:6: warning: no previous prototype for ‘svc_add_new_temp_xprt’ [-Wmissing-prototypes]
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When restarting an rpc call, we should not be carrying over data from the
previous call.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Don't schedule an rpc_delay before checking to see if the task
is a SOFTCONN because the tk_callback from the delay (__rpc_atrun)
clears the task status before the rpc_exit_task can be run.
Signed-off-by: Steve Dickson <steved@redhat.com>
Fixes: 561ec16031 (SUNRPC: call_connect_status should recheck...)
Link: http://lkml.kernel.org/r/5329CF7C.7090308@RedHat.com
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The use of KERN_INFO causes garbage characters to appear when
debugging is enabled.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
After commit a11a2bf4, "SUNRPC: Optimise away unnecessary data moves
in xdr_align_pages", Thu Aug 2 13:21:43 2012, READs larger than a
few hundred bytes via NFS/RDMA no longer work. This commit exposed
a long-standing bug in rpcrdma_inline_fixup().
I reproduce this with an rsize=4096 mount using the cthon04 basic
tests. Test 5 fails with an EIO error.
For my reproducer, kernel log shows:
NFS: server cheating in read reply: count 4096 > recvd 0
rpcrdma_inline_fixup() is zeroing the xdr_stream::page_len field,
and xdr_align_pages() is now returning that value to the READ XDR
decoder function.
That field is set up by xdr_inline_pages() by the READ XDR encoder
function. As far as I can tell, it is supposed to be left alone
after that, as it describes the dimensions of the reply xdr_stream,
not the contents of that stream.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=68391
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
