This change adds the secure context bank child node in mdss
driver, this is required for having both the secure and non-secure
smmu context bank support in the driver. This change also renames
the child nodes to avoid compilation issues on the builds where
fb driver mdss device file is also present. As a part of this
change the smmu driver registration is called as a part of
msm driver probe.
CRs-Fixed: 2053654
Change-Id: I90cd31fd792b0fd9772689dc6561bb0b429e1e3a
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Enable CFG80211_INTERNAL_REGDB to support WiFi 5G channels.
Change-Id: I7d53d2a09c30173d121368ec2e3584217ddc5093
Signed-off-by: Zhaoyang Liu <zhaoyang@codeaurora.org>
When using QGIC MSI, the MSI controller is GIC not PCIe host
driver. Only set irq chip data if PCIe host is the MSI
controller.
Change-Id: I0ba9e78127424ab3da4b1f46b3ed3fa5d65d05f6
Signed-off-by: Tony Truong <truong@codeaurora.org>
Handle the clk API return value so that it’s easy
to catch un clocked GPU register access.
Change-Id: I5a1a9a6cbd673394f126bb17b849393268a22b1b
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
Enable secondary USB port for HDK660 platform which use
host only mode.
Remove TCSR_QUSB2_PHY_CLAMP_DIG_N_1P8 resource entry for SDM660
which is not required to set now during disconnect as writing to this
register causes USB3.0 port and USB2.0 ports working independently.
Change-Id: I936a4012c30e0cd84144b12e34fb780cada541ae
Signed-off-by: Liangliang Lu <luliang@codeaurora.org>
Mhi node needs additional information for driver
probe to get success. This generic node is not
required and hence disable unwanted dtsi node for
msm8996.
Change-Id: I4dffd3d668ac065fc800e5e7d3b52fdf2733e03f
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
Add 500ms before MDM enumeration, this delay is needed for
link establishment between switch and MDM.
Change-Id: I32c4a4f9ef68b7672465ced0401fbf6dc0db0002
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
For targets with multiple UDCs having DRD feature, two UDCs
may be in peripheral mode. In that case, create and bind
android device corresponding to each gadget as and when
mkdir gadget is run. Keep global structure android_device as
android0 (or g1's device) for ease of use by f_midi and
f_audio_source.
Change-Id: Idae6f6d0d8811f27e836f5f6399395a15fbf3c2f
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Specify a 2 A PWM vs AUTO mode load current threshold for the
BoB regulator. Also specify the initial mode as AUTO.
Consumer that require the BoB to be in PWM mode should request
2000000 uA or more.
CRs-Fixed: 2054771
Change-Id: I2d2687a9b2204f677818b639fb6650084cffd84a
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
select_best_cpu() has previous CPU's cluster bias which overrides
the best_cpu with best_sibling_cpu when the power cost is same.
When the power table is configured incorrectly or static_cpu_pwr_cost/
static_cluster_pwr_cost tunables are set to a large value, the
power_cost() for all candidate CPUs can return INT_MAX. So the
stats.min_cost is never changed from it's initial value i.e INT_MAX.
In the above scenario, we find stats.best_cpu >= 0 && stats.min_cost =
stats.best_sibling_cpu_cost = INT_MAX && stats.best_sibling_cpu_cost = -1
and replace best_cpu with best_sibling_cpu i.e -1.
Change-Id: I09829e278e41daaaff959428ff50927aba29104c
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Re-phrase PD notification registration debug message and
change state name of SSR/PDR to avoid confusion.
CRs-Fixed: 2057789
Change-Id: I5b800982c0d8c4d5ba627e28f3c9fa8eab7ca074
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Currently platform device is not enabled as a wakeup source, so
notifying the PM core for a wakeup event action will be no-op.
Hence enable it during driver probe.
CRs-Fixed: 2058010
Change-Id: Iefe5bcd4b498a9f02fca001ebcf8ad484f443217
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
If the TE irq is alredy requested and registred with a GPIO, then
setting it to true and not continuing with further requesting of
the same.
Change-Id: Iacd1677127c2663d88826e58f1b72704b58db939
Signed-off-by: Rashi Bindra <rbindra@codeaurora.org>
Ensuring the CB size to be 128MB aligned, the bitmap will be page
aligned i.e a 4k bitmap page can represent 4*1024*8 4k page i.e
128MB memory. Hence a 128MB aligned memory will always have bitmap
at page boundary.
Change-Id: I42e07e5b6b7a8a03e4c3abd2a37f5b1c7de15669
Signed-off-by: Deepak Kushwah <dkushwah@codeaurora.org>
Add vmem clock config entries to msm8996 vmem device to fix
vmem probe failure. This will allow venus to use vmem that will
improve video usecase performance.
CRs-Fixed: 2044371
Change-Id: Id7f2797b12d93ef6d4a55cf50babdd25214747ee
Signed-off-by: Shiju Mathew <shijum@codeaurora.org>
Currently USB driver tries to set power role as none and waits for
disconnect notification to set new mode. But there is a chance that it
might fail and stuck in infinite loop if other device is not dual-role
capable. Fix it by having timeout and bail out in case timeout happens.
Change-Id: I569356ee445c53950ed8fdd3f9994d4ae0e86131
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
This reverts commit ae94b477af.
This change brings side effect of smmu fault in apq8098 project. It blocks their regression test.
Change-Id: Ia479188eca74ec988026f7d42207435da2f79bfc
Signed-off-by: Guchun Chen <guchunc@codeaurora.org>
According to the PD 2.0 Spec, Section 6.2.1.3, the MessageID
field shall only be incremented upon successful transmission
(meaning GoodCRC was received). Thus, increment the counter
only when pd_phy_write() succeeds.
Change-Id: I73dce5736c473a1f79db9be868442c7941d13c44
Signed-off-by: Jack Pham <jackp@codeaurora.org>
