-----BEGIN PGP SIGNATURE-----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=parZ
-----END PGP SIGNATURE-----
Merge 4.4.62 into android-4.4
Changes in 4.4.62:
drm/i915: Avoid tweaking evaluation thresholds on Baytrail v3
drm/i915: Stop using RP_DOWN_EI on Baytrail
usb: dwc3: gadget: delay unmap of bounced requests
mtd: bcm47xxpart: fix parsing first block after aligned TRX
MIPS: Introduce irq_stack
MIPS: Stack unwinding while on IRQ stack
MIPS: Only change $28 to thread_info if coming from user mode
MIPS: Switch to the irq_stack in interrupts
MIPS: Select HAVE_IRQ_EXIT_ON_IRQ_STACK
MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
crypto: caam - fix RNG deinstantiation error checking
net/packet: fix overflow in check for priv area size
blk-mq: Avoid memory reclaim when remapping queues
usb: hub: Wait for connection to be reestablished after port reset
net/mlx4_en: Fix bad WQE issue
net/mlx4_core: Fix racy CQ (Completion Queue) free
net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions
ibmveth: set correct gso_size and gso_type
Linux 4.4.62
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 22547c4cc4fe20698a6a85a55b8788859134b8e4 upstream.
On a system with a defective USB device connected to an USB hub,
an endless sequence of port connect events was observed. The sequence
of events as observed is as follows:
- Port reports connected event (port status=USB_PORT_STAT_CONNECTION).
- Event handler debounces port and resets it by calling hub_port_reset().
- hub_port_reset() calls hub_port_wait_reset() to wait for the reset
to complete.
- The reset completes, but USB_PORT_STAT_CONNECTION is not immediately
set in the port status register.
- hub_port_wait_reset() returns -ENOTCONN.
- Port initialization sequence is aborted.
- A few milliseconds later, the port again reports a connected event,
and the sequence repeats.
This continues either forever or, randomly, stops if the connection
is already re-established when the port status is read. It results in
a high rate of udev events. This in turn destabilizes userspace since
the above sequence holds the device mutex pretty much continuously
and prevents userspace from actually reading the device status.
To prevent the problem from happening, let's wait for the connection
to be re-established after a port reset. If the device was actually
disconnected, the code will still return an error, but it will do so
only after the long reset timeout.
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de288e36fe33f7e06fa272bc8e2f85aa386d99aa upstream.
In the case of bounced ep0 requests, we must delay DMA operation until
after ->complete() otherwise we might overwrite contents of req->buf.
This caused problems with RNDIS gadget.
Signed-off-by: Janusz Dziedzic <januszx.dziedzic@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.4.60:
libceph: force GFP_NOIO for socket allocations
xen/setup: Don't relocate p2m over existing one
scsi: mpt3sas: fix hang on ata passthrough commands
scsi: sg: check length passed to SG_NEXT_CMD_LEN
scsi: libsas: fix ata xfer length
ALSA: seq: Fix race during FIFO resize
ALSA: hda - fix a problem for lineout on a Dell AIO machine
ASoC: atmel-classd: fix audio clock rate
ACPI: Fix incompatibility with mcount-based function graph tracing
ACPI: Do not create a platform_device for IOAPIC/IOxAPIC
tty/serial: atmel: fix race condition (TX+DMA)
tty/serial: atmel: fix TX path in atmel_console_write()
USB: fix linked-list corruption in rh_call_control()
KVM: x86: clear bus pointer when destroyed
drm/radeon: Override fpfn for all VRAM placements in radeon_evict_flags
mm, hugetlb: use pte_present() instead of pmd_present() in follow_huge_pmd()
MIPS: Lantiq: Fix cascaded IRQ setup
rtc: s35390a: fix reading out alarm
rtc: s35390a: make sure all members in the output are set
rtc: s35390a: implement reset routine as suggested by the reference
rtc: s35390a: improve irq handling
KVM: kvm_io_bus_unregister_dev() should never fail
power: reset: at91-poweroff: timely shutdown LPDDR memories
blk: improve order of bio handling in generic_make_request()
blk: Ensure users for current->bio_list can see the full list.
padata: avoid race in reordering
Linux 4.4.60
Change-Id: I705c78ccae62ca59f922164085e7ca03ad4ecc6b
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 1633682053a7ee8058e10c76722b9b28e97fb73f upstream.
Using KASAN, Dmitry found a bug in the rh_call_control() routine: If
buffer allocation fails, the routine returns immediately without
unlinking its URB from the control endpoint, eventually leading to
linked-list corruption.
This patch fixes the problem by jumping to the end of the routine
(where the URB is unlinked) when an allocation failure occurs.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=TI1/
-----END PGP SIGNATURE-----
Merge 4.4.48 into android-4.4
Changes in 4.4.48:
net/openvswitch: Set the ipv6 source tunnel key address attribute correctly
net: bcmgenet: Do not suspend PHY if Wake-on-LAN is enabled
net: properly release sk_frag.page
amd-xgbe: Fix jumbo MTU processing on newer hardware
net: unix: properly re-increment inflight counter of GC discarded candidates
net/mlx5: Increase number of max QPs in default profile
net/mlx5e: Count LRO packets correctly
net: bcmgenet: remove bcmgenet_internal_phy_setup()
ipv4: provide stronger user input validation in nl_fib_input()
socket, bpf: fix sk_filter use after free in sk_clone_lock
tcp: initialize icsk_ack.lrcvtime at session start time
Input: elan_i2c - add ASUS EeeBook X205TA special touchpad fw
Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000
Input: iforce - validate number of endpoints before using them
Input: ims-pcu - validate number of endpoints before using them
Input: hanwang - validate number of endpoints before using them
Input: yealink - validate number of endpoints before using them
Input: cm109 - validate number of endpoints before using them
Input: kbtab - validate number of endpoints before using them
Input: sur40 - validate number of endpoints before using them
ALSA: seq: Fix racy cell insertions during snd_seq_pool_done()
ALSA: ctxfi: Fix the incorrect check of dma_set_mask() call
ALSA: hda - Adding a group of pin definition to fix headset problem
USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems
USB: serial: qcserial: add Dell DW5811e
ACM gadget: fix endianness in notifications
usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval
usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk
USB: uss720: fix NULL-deref at probe
USB: lvtest: fix NULL-deref at probe
USB: idmouse: fix NULL-deref at probe
USB: wusbcore: fix NULL-deref at probe
usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer
usb: hub: Fix crash after failure to read BOS descriptor
uwb: i1480-dfu: fix NULL-deref at probe
uwb: hwa-rc: fix NULL-deref at probe
mmc: ushc: fix NULL-deref at probe
iio: adc: ti_am335x_adc: fix fifo overrun recovery
iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
parport: fix attempt to write duplicate procfiles
ext4: mark inode dirty after converting inline directory
mmc: sdhci: Do not disable interrupts while waiting for clock
xen/acpi: upload PM state from init-domain to Xen
iommu/vt-d: Fix NULL pointer dereference in device_to_iommu
ARM: at91: pm: cpu_idle: switch DDR to power-down mode
ARM: dts: at91: sama5d2: add dma properties to UART nodes
cpufreq: Restore policy min/max limits on CPU online
raid10: increment write counter after bio is split
libceph: don't set weight to IN when OSD is destroyed
xfs: don't allow di_size with high bit set
xfs: fix up xfs_swap_extent_forks inline extent handling
nl80211: fix dumpit error path RTNL deadlocks
USB: usbtmc: add missing endpoint sanity check
xfs: clear _XBF_PAGES from buffers when readahead page
xen: do not re-use pirq number cached in pci device msi msg data
igb: Workaround for igb i210 firmware issue
igb: add i211 to i210 PHY workaround
x86/hyperv: Handle unknown NMIs on one CPU when unknown_nmi_panic
PCI: Separate VF BAR updates from standard BAR updates
PCI: Remove pci_resource_bar() and pci_iov_resource_bar()
PCI: Add comments about ROM BAR updating
PCI: Decouple IORESOURCE_ROM_ENABLE and PCI_ROM_ADDRESS_ENABLE
PCI: Don't update VF BARs while VF memory space is enabled
PCI: Update BARs using property bits appropriate for type
PCI: Ignore BAR updates on virtual functions
PCI: Do any VF BAR updates before enabling the BARs
vfio/spapr: Postpone allocation of userspace version of TCE table
block: allow WRITE_SAME commands with the SG_IO ioctl
s390/zcrypt: Introduce CEX6 toleration
uvcvideo: uvc_scan_fallback() for webcams with broken chain
ACPI / blacklist: add _REV quirks for Dell Precision 5520 and 3520
ACPI / blacklist: Make Dell Latitude 3350 ethernet work
serial: 8250_pci: Detach low-level driver during PCI error recovery
fbcon: Fix vc attr at deinit
crypto: algif_hash - avoid zero-sized array
Linux 4.4.58
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 687e0687f71ec00e0132a21fef802dee88c2f1ad upstream.
USBTMC devices are required to have a bulk-in and a bulk-out endpoint,
but the driver failed to verify this, something which could lead to the
endpoint addresses being taken from uninitialised memory.
Make sure to zero all private data as part of allocation, and add the
missing endpoint sanity check.
Note that this also addresses a more recently introduced issue, where
the interrupt-in-presence flag would also be uninitialised whenever the
optional interrupt-in endpoint is not present. This in turn could lead
to an interrupt urb being allocated, initialised and submitted based on
uninitialised values.
Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.")
Fixes: 5b775f672c ("USB: add USB test and measurement class driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
[ johan: backport to v4.4 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b2db29fbb4e766fcd02207eb2e2087170bd6ebc upstream.
If usb_get_bos_descriptor() returns an error, usb->bos will be NULL.
Nevertheless, it is dereferenced unconditionally in
hub_set_initial_usb2_lpm_policy() if usb2_hw_lpm_capable is set.
This results in a crash.
usb 5-1: unable to get BOS descriptor
...
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = ffffffc00165f000
[00000008] *pgd=000000000174f003, *pud=000000000174f003,
*pmd=0000000001750003, *pte=00e8000001751713
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac [ ... ]
CPU: 5 PID: 3353 Comm: kworker/5:3 Tainted: G B 4.4.52 #480
Hardware name: Google Kevin (DT)
Workqueue: events driver_set_config_work
task: ffffffc0c3690000 ti: ffffffc0ae9a8000 task.ti: ffffffc0ae9a8000
PC is at hub_port_init+0xc3c/0xd10
LR is at hub_port_init+0xc3c/0xd10
...
Call trace:
[<ffffffc0007fbbfc>] hub_port_init+0xc3c/0xd10
[<ffffffc0007fbe2c>] usb_reset_and_verify_device+0x15c/0x82c
[<ffffffc0007fc5e0>] usb_reset_device+0xe4/0x298
[<ffffffbffc0e3fcc>] rtl8152_probe+0x84/0x9b0 [r8152]
[<ffffffc00080ca8c>] usb_probe_interface+0x244/0x2f8
[<ffffffc000774a24>] driver_probe_device+0x180/0x3b4
[<ffffffc000774e48>] __device_attach_driver+0xb4/0xe0
[<ffffffc000772168>] bus_for_each_drv+0xb4/0xe4
[<ffffffc0007747ec>] __device_attach+0xd0/0x158
[<ffffffc000775080>] device_initial_probe+0x24/0x30
[<ffffffc0007739d4>] bus_probe_device+0x50/0xe4
[<ffffffc000770bd0>] device_add+0x414/0x738
[<ffffffc000809fe8>] usb_set_configuration+0x89c/0x914
[<ffffffc00080a120>] driver_set_config_work+0xc0/0xf0
[<ffffffc000249bb8>] process_one_work+0x390/0x6b8
[<ffffffc00024abcc>] worker_thread+0x480/0x610
[<ffffffc000251a80>] kthread+0x164/0x178
[<ffffffc0002045d0>] ret_from_fork+0x10/0x40
Since we don't know anything about LPM capabilities without BOS descriptor,
don't attempt to enable LPM if it is not available.
Fixes: 890dae8867 ("xhci: Enable LPM support only for hardwired ...")
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0090114d336a9604aa2d90bc83f20f7cd121b76c upstream.
The CPPI 4.1 driver polls register to workaround the premature TX
interrupt issue, but it causes audio playback underrun when triggered in
Isoch transfers.
Isoch doesn't do back-to-back transfers, the TX should be done by the
time the next transfer is scheduled. So skip this polling workaround for
Isoch transfer.
Fixes: a655f481d8 ("usb: musb: musb_cppi41: handle pre-mature TX complete interrupt")
Reported-by: Alexandre Bailon <abailon@baylibre.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03ace948a4eb89d1cf51c06afdfc41ebca5fdb27 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.
This specifically fixes the NULL-pointer dereference when probing HWA HC
devices.
Fixes: df3654236e ("wusb: add the Wire Adapter (WA) core")
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0addd3fa6bcd119be9428996d5d4522479ab240 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1dc56c52d2484be09c7398a5207d6b11a4256be9 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should the probed device lack endpoints.
Note that this driver does not bind to any devices by default.
Fixes: ce21bfe603 ("USB: Add LVS Test device driver")
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f259ca3eed6e4b79ac3d5c5c9fb259fb46e86217 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.
Note that the endpoint access that causes the NULL-deref is currently
only used for debugging purposes during probe so the oops only happens
when dynamic debugging is enabled. This means the driver could be
rewritten to continue to accept device with only two endpoints, should
such devices exist.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3243367b209faed5c320a4e5f9a565ee2a2ba958 upstream.
Some USB 2.0 devices erroneously report millisecond values in
bInterval. The generic config code manages to catch most of them,
but in some cases it's not completely enough.
The case at stake here is a USB 2.0 braille device, which wants to
announce 10ms and thus sets bInterval to 10, but with the USB 2.0
computation that yields to 64ms. It happens that one can type fast
enough to reach this interval and get the device buffers overflown,
leading to problematic latencies. The generic config code does not
catch this case because the 64ms is considered a sane enough value.
This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk
to mark devices which actually report milliseconds in bInterval,
and marks Vario Ultra devices as needing it.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09424c50b7dff40cb30011c09114404a4656e023 upstream.
The streaming_maxburst module parameter is 0 offset (0..15)
so we must add 1 while using it for wBytesPerInterval
calculation for the SuperSpeed companion descriptor.
Without this host uvcvideo driver will always see the wrong
wBytesPerInterval for SuperSpeed uvc gadget and may not find
a suitable video interface endpoint.
e.g. for streaming_maxburst = 0 case it will always
fail as wBytePerInterval was evaluating to 0.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cdd7928df0d2efaa3270d711963773a08a4cc8ab upstream.
The gadget code exports the bitfield for serial status changes
over the wire in its internal endianness. The fix is to convert
to little endian before sending it over the wire.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Tested-by: 家瑋 <momo1208@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 436ecf5519d892397af133a79ccd38a17c25fa51 upstream.
This is a Dell branded Sierra Wireless EM7455.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e9f44eaaef0df7b846e9316fa9ca72a02025d44 upstream.
Add Quectel UC15, UC20, EC21, and EC25. The EC20 is handled by
qcserial due to a USB VID/PID conflict with an existing Acer
device.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=sriX
-----END PGP SIGNATURE-----
Merge 4.4.57 to android-4.4
Changes in 4.4.57:
usb: core: hub: hub_port_init lock controller instead of bus
USB: don't free bandwidth_mutex too early
crypto: ghash-clmulni - Fix load failure
crypto: cryptd - Assign statesize properly
crypto: mcryptd - Fix load failure
cxlflash: Increase cmd_per_lun for better throughput
ACPI / video: skip evaluating _DOD when it does not exist
pinctrl: cherryview: Do not mask all interrupts in probe
Drivers: hv: balloon: don't crash when memory is added in non-sorted order
Drivers: hv: avoid vfree() on crash
xen/qspinlock: Don't kick CPU if IRQ is not initialized
KVM: PPC: Book3S PR: Fix illegal opcode emulation
s390/pci: fix use after free in dma_init
drm/amdgpu: add missing irq.h include
tpm_tis: Use devm_free_irq not free_irq
hv_netvsc: use skb_get_hash() instead of a homegrown implementation
kernek/fork.c: allocate idle task for a CPU always on its local node
give up on gcc ilog2() constant optimizations
perf/core: Fix event inheritance on fork()
cpufreq: Fix and clean up show_cpuinfo_cur_freq()
powerpc/boot: Fix zImage TOC alignment
md/raid1/10: fix potential deadlock
target/pscsi: Fix TYPE_TAPE + TYPE_MEDIMUM_CHANGER export
scsi: lpfc: Add shutdown method for kexec
scsi: libiscsi: add lock around task lists to fix list corruption regression
target: Fix VERIFY_16 handling in sbc_parse_cdb
isdn/gigaset: fix NULL-deref at probe
gfs2: Avoid alignment hole in struct lm_lockname
percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pages
ext4: fix fencepost in s_first_meta_bg validation
Linux 4.4.57
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit ab2a4bf83902c170d29ba130a8abb5f9d90559e1 upstream.
The USB core contains a bug that can show up when a USB-3 host
controller is removed. If the primary (USB-2) hcd structure is
released before the shared (USB-3) hcd, the core will try to do a
double-free of the common bandwidth_mutex.
The problem was described in graphical form by Chung-Geol Kim, who
first reported it:
=================================================
At *remove USB(3.0) Storage
sequence <1> --> <5> ((Problem Case))
=================================================
VOLD
------------------------------------|------------
(uevent)
________|_________
|<1> |
|dwc3_otg_sm_work |
|usb_put_hcd |
|peer_hcd(kref=2)|
|__________________|
________|_________
|<2> |
|New USB BUS #2 |
| |
|peer_hcd(kref=1) |
| |
--(Link)-bandXX_mutex|
| |__________________|
|
___________________ |
|<3> | |
|dwc3_otg_sm_work | |
|usb_put_hcd | |
|primary_hcd(kref=1)| |
|___________________| |
_________|_________ |
|<4> | |
|New USB BUS #1 | |
|hcd_release | |
|primary_hcd(kref=0)| |
| | |
|bandXX_mutex(free) |<-
|___________________|
(( VOLD ))
______|___________
|<5> |
| SCSI |
|usb_put_hcd |
|peer_hcd(kref=0) |
|*hcd_release |
|bandXX_mutex(free*)|<- double free
|__________________|
=================================================
This happens because hcd_release() frees the bandwidth_mutex whenever
it sees a primary hcd being released (which is not a very good idea
in any case), but in the course of releasing the primary hcd, it
changes the pointers in the shared hcd in such a way that the shared
hcd will appear to be primary when it gets released.
This patch fixes the problem by changing hcd_release() so that it
deallocates the bandwidth_mutex only when the _last_ hcd structure
referencing it is released. The patch also removes an unnecessary
test, so that when an hcd is released, both the shared_hcd and
primary_hcd pointers in the hcd's peer will be cleared.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Chung-Geol Kim <chunggeol.kim@samsung.com>
Tested-by: Chung-Geol Kim <chunggeol.kim@samsung.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit feb26ac31a2a5cb88d86680d9a94916a6343e9e6 upstream.
The XHCI controller presents two USB buses to the system - one for USB2
and one for USB3. The hub init code (hub_port_init) is reentrant but
only locks one bus per thread, leading to a race condition failure when
two threads attempt to simultaneously initialise a USB2 and USB3 device:
[ 8.034843] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 13.183701] usb 3-3: device descriptor read/all, error -110
On a test system this failure occurred on 6% of all boots.
The call traces at the point of failure are:
Call Trace:
[<ffffffff81b9bab7>] schedule+0x37/0x90
[<ffffffff817da7cd>] usb_kill_urb+0x8d/0xd0
[<ffffffff8111e5e0>] ? wake_up_atomic_t+0x30/0x30
[<ffffffff817dafbe>] usb_start_wait_urb+0xbe/0x150
[<ffffffff817db10c>] usb_control_msg+0xbc/0xf0
[<ffffffff817d07de>] hub_port_init+0x51e/0xb70
[<ffffffff817d4697>] hub_event+0x817/0x1570
[<ffffffff810f3e6f>] process_one_work+0x1ff/0x620
[<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620
[<ffffffff810f4684>] worker_thread+0x64/0x4b0
[<ffffffff810f4620>] ? rescuer_thread+0x390/0x390
[<ffffffff810fa7f5>] kthread+0x105/0x120
[<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200
[<ffffffff81ba183f>] ret_from_fork+0x3f/0x70
[<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200
Call Trace:
[<ffffffff817fd36d>] xhci_setup_device+0x53d/0xa40
[<ffffffff817fd87e>] xhci_address_device+0xe/0x10
[<ffffffff817d047f>] hub_port_init+0x1bf/0xb70
[<ffffffff811247ed>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff817d4697>] hub_event+0x817/0x1570
[<ffffffff810f3e6f>] process_one_work+0x1ff/0x620
[<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620
[<ffffffff810f4684>] worker_thread+0x64/0x4b0
[<ffffffff810f4620>] ? rescuer_thread+0x390/0x390
[<ffffffff810fa7f5>] kthread+0x105/0x120
[<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200
[<ffffffff81ba183f>] ret_from_fork+0x3f/0x70
[<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200
Which results from the two call chains:
hub_port_init
usb_get_device_descriptor
usb_get_descriptor
usb_control_msg
usb_internal_control_msg
usb_start_wait_urb
usb_submit_urb / wait_for_completion_timeout / usb_kill_urb
hub_port_init
hub_set_address
xhci_address_device
xhci_setup_device
Mathias Nyman explains the current behaviour violates the XHCI spec:
hub_port_reset() will end up moving the corresponding xhci device slot
to default state.
As hub_port_reset() is called several times in hub_port_init() it
sounds reasonable that we could end up with two threads having their
xhci device slots in default state at the same time, which according to
xhci 4.5.3 specs still is a big no no:
"Note: Software shall not transition more than one Device Slot to the
Default State at a time"
So both threads fail at their next task after this.
One fails to read the descriptor, and the other fails addressing the
device.
Fix this in hub_port_init by locking the USB controller (instead of an
individual bus) to prevent simultaneous initialisation of both buses.
Fixes: 638139eb95 ("usb: hub: allow to process more usb hub events in parallel")
Link: https://lkml.org/lkml/2016/2/8/312
Link: https://lkml.org/lkml/2016/2/4/748
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: minor merge conflict resolution for linux-4.4.y]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 654b404f2a222f918af9b0cd18ad469d0c941a8e upstream.
Add missing sanity check to the bulk-in completion handler to avoid an
integer underflow that can be triggered by a malicious device.
This avoids leaking 128 kB of memory content from after the URB transfer
buffer to user space.
Fixes: 8c209e6782 ("USB: make actual_length in struct urb field u32")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b1d250afb8eb9d65afb568bac9b9f9253a82b49 upstream.
Fix a NULL-pointer dereference in the interrupt callback should a
malicious device send data containing a bad port number by adding the
missing sanity check.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de46e56653de7b3b54baa625bd582635008b8d05 upstream.
Make sure to verify that we have the required interrupt-out endpoint for
IOWarrior56 devices to avoid dereferencing a NULL-pointer in write
should a malicious device lack such an endpoint.
Fixes: 946b960d13 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7321e81fc369abe353cf094d4f0dc2fe11ab95f upstream.
Make sure to check for the required interrupt-in endpoint to avoid
dereferencing a NULL-pointer should a malicious device lack such an
endpoint.
Note that a fairly recent change purported to fix this issue, but added
an insufficient test on the number of endpoints only, a test which can
now be removed.
Fixes: 4ec0ef3a8212 ("USB: iowarrior: fix oops with malicious USB descriptors")
Fixes: 946b960d13 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30572418b445d85fcfe6c8fe84c947d2606767d8 upstream.
This driver needlessly took another reference to the tty on open, a
reference which was then never released on close. This lead to not just
a leak of the tty, but also a driver reference leak that prevented the
driver from being unloaded after a port had once been opened.
Fixes: 4a90f09b20 ("tty: usb-serial krefs")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c76d7cd520ebffc1ea9ea0850d87a224a50c7f2 upstream.
Add missing sanity check to the bulk-in completion handler to avoid an
integer underflow that could be triggered by a malicious device.
This avoids leaking up to 56 bytes from after the URB transfer buffer to
user space.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dcc7620cad5ad1326a78f4031a7bf4f0e5b42984 upstream.
Upstream commit 98d74f9ceaef ("xhci: fix 10 second timeout on removal of
PCI hotpluggable xhci controllers") fixes a problem with hot pluggable PCI
xhci controllers which can result in excessive timeouts, to the point where
the system reports a deadlock.
The same problem is seen with hot pluggable xhci controllers using the
xhci-plat driver, such as the driver used for Type-C ports on rk3399.
Similar to hot-pluggable PCI controllers, the driver for this chip
removes the xhci controller from the system when the Type-C cable is
disconnected.
The solution for PCI devices works just as well for non-PCI devices
and avoids the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f95e60a7dbecd2de816bb3ad517b3d4fbc20b507 upstream.
According to xHCI spec, HCIVERSION containing a BCD encoding
of the xHCI specification revision number, 0100h corresponds
to xHCI version 1.0. Change "100" as "0x100".
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Fixes: 04abb6de28 ("xhci: Read and parse new xhci 1.1 capability register")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2bfa0719ac2a9b2f3c91345873d3cdebd0296ba9 upstream.
If we're dealing with SuperSpeed endpoints, we need
to make sure to pass along the companion descriptor
and initialize fields needed by the Gadget
API. Eventually, f_fs.c should be converted to use
config_ep_by_speed() like all other functions,
though.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7369090a9fb57c3fc705ce355d2e4523a5a24716 upstream.
Some gadget drivers are bad, bad boys. We notice
that ADB was passing bad Burst Size which caused top
bits of param0 to be overwritten which confused DWC3
when running this command.
In order to avoid future issues, we're going to make
sure values passed by macros are always safe for the
controller. Note that ADB still needs a fix to *not*
pass bad values.
Reported-by: Mohamed Abbas <mohamed.abbas@intel.com>
Sugested-by: Adam Andruszak <adam.andruszak@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e46565cf622dd0534a9d8bffe152a577b48d7aa upstream.
A recent change claimed to fix an off-by-one error in the OOB-port
completion handler, but instead introduced such an error. This could
specifically led to modem-status changes going unnoticed, effectively
breaking TIOCMGET.
Note that the offending commit fixes a loop-condition underflow and is
marked for stable, but should not be backported without this fix.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 2d380889215f ("USB: serial: digi_acceleport: fix OOB data sanity
check")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d380889215fe20b8523345649dee0579821800c upstream.
Make sure to check for short transfers to avoid underflow in a loop
condition when parsing the receive buffer.
Also fix an off-by-one error in the incomplete sanity check which could
lead to invalid data being parsed.
Fixes: 8c209e6782 ("USB: make actual_length in struct urb field u32")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reapplying fix by Darren Whobrey (Change 69674)
Fixes issues: 20545, 59667 and 61390.
With prior version of f_accessory.c, UsbAccessories would not
unbind cleanly when application is closed or i/o stopped
while the usb cable is still connected. The accessory gadget
driver would be left in an invalid state which was not reset
on subsequent binding or opening. A reboot was necessary to clear.
In some phones this issues causes the phone to reboot upon
unplugging the USB cable.
Main problem was that acc_disconnect was being called on I/O error
which reset disconnected and online.
Minor fix required to properly track setting and unsetting of
disconnected and online flags. Also added urb Q wakeup's on unbind
to help unblock waiting threads.
Tested on Nexus 7 grouper. Expected behaviour now observed:
closing accessory causes blocked i/o to interrupt with IOException.
Accessory can be restarted following closing of file handle
and re-opening.
This is a generic fix that applies to all devices.
Change-Id: I4e08b326730dd3a2820c863124cee10f7cb5501e
Signed-off-by: Darren Whobrey <d.whobrey@mildai.org>
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
