[ Upstream commit dfa523ae9f2542bee4cddaea37b3be3e157f6e6b ]
Add a flag to indicate if a queue is rate-limited. Test the flag in
NAPI poll handler and avoid rescheduling the queue if true, otherwise
we risk locking up the host. The rescheduling will be done in the
timer callback function.
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b9a88a390dacb37b051a7b09b9a08f546edf5eb upstream.
The PHY library does not deal very well with bind and unbind events. The first
thing we would see is that we were not properly canceling the PHY state machine
workqueue, so we would be crashing while dereferencing phydev->drv since there
is no driver attached anymore.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7ad813f208533cebfcc32d3d7474dc1677d1b09a ]
Marc reported that he was not getting the PHY library adjust_link()
callback function to run when calling phy_stop() + phy_disconnect()
which does not indeed happen because we set the state machine to
PHY_HALTED but we don't get to run it to process this state past that
point.
Fix this with a synchronous call to phy_state_machine() in order to have
the state machine actually act on PHY_HALTED, set the PHY device's link
down, turn the network device's carrier off and finally call the
adjust_link() function.
Reported-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Fixes: a390d1f379 ("phylib: convert state_queue work to delayed_work")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 219c81f7d1d5a89656cb3b53d3b4e11e93608d80 ]
When driver fail to allocate an entry to send command to FW, it must
notify the calling function and release the memory allocated for
this command.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4813497b537c6208c90d6cbecac5072d347de900 ]
Before commit bf8f6952a233 ("Add blurb about RGMII") it was unclear
whose responsibility it was to insert the required clock skew, and
in hindsight, some PHY drivers got it wrong. The solution forward
is to introduce a new property, explicitly requiring skew from the
node to which it is attached. In the interim, this driver will handle
all 4 RGMII modes identically (no skew).
Fixes: 52dfc83012 ("net: ethernet: add driver for Aurora VLSI NB8800 Ethernet controller")
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9476d393667968b4a02afbe9d35a3558482b943e ]
DMA transfers are not allowed to buffers that are on the stack.
Therefore allocate a buffer to store the result of usb_control_message().
Fixes these bugreports:
https://bugzilla.kernel.org/show_bug.cgi?id=195217https://bugzilla.redhat.com/show_bug.cgi?id=1421387https://bugzilla.redhat.com/show_bug.cgi?id=1427398
Shortened kernel backtrace from 4.11.9-200.fc25.x86_64:
kernel: ------------[ cut here ]------------
kernel: WARNING: CPU: 3 PID: 2957 at drivers/usb/core/hcd.c:1587
kernel: transfer buffer not dma capable
kernel: Call Trace:
kernel: dump_stack+0x63/0x86
kernel: __warn+0xcb/0xf0
kernel: warn_slowpath_fmt+0x5a/0x80
kernel: usb_hcd_map_urb_for_dma+0x37f/0x570
kernel: ? try_to_del_timer_sync+0x53/0x80
kernel: usb_hcd_submit_urb+0x34e/0xb90
kernel: ? schedule_timeout+0x17e/0x300
kernel: ? del_timer_sync+0x50/0x50
kernel: ? __slab_free+0xa9/0x300
kernel: usb_submit_urb+0x2f4/0x560
kernel: ? urb_destroy+0x24/0x30
kernel: usb_start_wait_urb+0x6e/0x170
kernel: usb_control_msg+0xdc/0x120
kernel: mcs_get_reg+0x36/0x40 [mcs7780]
kernel: mcs_net_open+0xb5/0x5c0 [mcs7780]
...
Regression goes back to 4.9, so it's a good candidate for -stable.
Though it's the decision of the maintainer.
Thanks to Dan Williams for adding the "transfer buffer not dma capable"
warning in the first place. It instantly pointed me in the right direction.
Patch has been tested with transferring data from a Polar watch.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=l+tE
-----END PGP SIGNATURE-----
Merge 4.4.80 into android-4.4
Changes in 4.4.80
af_key: Add lock to key dump
pstore: Make spinlock per zone instead of global
net: reduce skb_warn_bad_offload() noise
powerpc/pseries: Fix of_node_put() underflow during reconfig remove
crypto: authencesn - Fix digest_null crash
md/raid5: add thread_group worker async_tx_issue_pending_all
drm/vmwgfx: Fix gcc-7.1.1 warning
drm/nouveau/bar/gf100: fix access to upper half of BAR2
KVM: PPC: Book3S HV: Context-switch EBB registers properly
KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exit
KVM: PPC: Book3S HV: Reload HTM registers explicitly
KVM: PPC: Book3S HV: Save/restore host values of debug registers
Revert "powerpc/numa: Fix percpu allocations to be NUMA aware"
Staging: comedi: comedi_fops: Avoid orphaned proc entry
drm/rcar: Nuke preclose hook
drm: rcar-du: Perform initialization/cleanup at probe/remove time
drm: rcar-du: Simplify and fix probe error handling
perf intel-pt: Fix ip compression
perf intel-pt: Fix last_ip usage
perf intel-pt: Use FUP always when scanning for an IP
perf intel-pt: Ensure never to set 'last_ip' when packet 'count' is zero
xfs: don't BUG() on mixed direct and mapped I/O
nfc: fdp: fix NULL pointer dereference
net: phy: Do not perform software reset for Generic PHY
isdn: Fix a sleep-in-atomic bug
isdn/i4l: fix buffer overflow
ath10k: fix null deref on wmi-tlv when trying spectral scan
wil6210: fix deadlock when using fw_no_recovery option
mailbox: always wait in mbox_send_message for blocking Tx mode
mailbox: skip complete wait event if timer expired
mailbox: handle empty message in tx_tick
mpt3sas: Don't overreach ioc->reply_post[] during initialization
kaweth: fix firmware download
kaweth: fix oops upon failed memory allocation
sched/cgroup: Move sched_online_group() back into css_online() to fix crash
PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
RDMA/uverbs: Fix the check for port number
libnvdimm, btt: fix btt_rw_page not returning errors
ipmi/watchdog: fix watchdog timeout set on reboot
dentry name snapshots
v4l: s5c73m3: fix negation operator
Make file credentials available to the seqfile interfaces
/proc/iomem: only expose physical resource addresses to privileged users
vlan: Propagate MAC address to VLANs
pstore: Allow prz to control need for locking
pstore: Correctly initialize spinlock and flags
pstore: Use dynamic spinlock initializer
net: skb_needs_check() accepts CHECKSUM_NONE for tx
sched/cputime: Fix prev steal time accouting during CPU hotplug
xen/blkback: don't free be structure too early
xen/blkback: don't use xen_blkif_get() in xen-blkback kthread
tpm: fix a kernel memory leak in tpm-sysfs.c
tpm: Replace device number bitmap with IDR
x86/mce/AMD: Make the init code more robust
r8169: add support for RTL8168 series add-on card.
ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flags
ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output
net/mlx4: Remove BUG_ON from ICM allocation routine
drm/msm: Ensure that the hardware write pointer is valid
drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set
vfio-pci: use 32-bit comparisons for register address for gcc-4.5
irqchip/keystone: Fix "scheduling while atomic" on rt
ASoC: tlv320aic3x: Mark the RESET register as volatile
spi: dw: Make debugfs name unique between instances
ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL
irqchip/mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
openrisc: Add _text symbol to fix ksym build error
dmaengine: ioatdma: Add Skylake PCI Dev ID
dmaengine: ioatdma: workaround SKX ioatdma version
dmaengine: ti-dma-crossbar: Add some 'of_node_put()' in error path.
ARM64: zynqmp: Fix W=1 dtc 1.4 warnings
ARM64: zynqmp: Fix i2c node's compatible string
ARM: s3c2410_defconfig: Fix invalid values for NF_CT_PROTO_*
ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
usb: gadget: Fix copy/pasted error message
Btrfs: adjust outstanding_extents counter properly when dio write is split
tools lib traceevent: Fix prev/next_prio for deadline tasks
xfrm: Don't use sk_family for socket policy lookups
perf tools: Install tools/lib/traceevent plugins with install-bin
perf symbols: Robustify reading of build-id from sysfs
video: fbdev: cobalt_lcdfb: Handle return NULL error from devm_ioremap
vfio-pci: Handle error from pci_iomap
arm64: mm: fix show_pte KERN_CONT fallout
nvmem: imx-ocotp: Fix wrong register size
sh_eth: enable RX descriptor word 0 shift on SH7734
ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion
HID: ignore Petzl USB headlamp
scsi: fnic: Avoid sending reset to firmware when another reset is in progress
scsi: snic: Return error code on memory allocation failure
ASoC: dpcm: Avoid putting stream state to STOP when FE stream is paused
Linux 4.4.80
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 71eae1ca77fd6be218d8a952d97bba827e56516d ]
The RX descriptor word 0 on SH7734 has the RFS[9:0] field in bits 16-25
(bits 0-15 usually used for that are occupied by the packet checksum).
Thus we need to set the 'shift_rd0' field in the SH7734 SoC data...
Fixes: f0e81fecd4 ("net: sh_eth: Add support SH7734")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c1d5f8ff80ea84768f5fae1ca9d1abfbb5e6bbaa ]
This patch removes BUG_ON() macro from mlx4_alloc_icm_coherent()
by checking DMA address alignment in advance and performing proper
folding in case of error.
Fixes: 5b0bf5e25e ("mlx4_core: Support ICM tables in coherent memory")
Reported-by: Ozgur Karatas <okaratas@member.fsf.org>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 610c908773d30907c950ca3b2ee8ac4b2813537b ]
This chip is the same as RTL8168, but its device id is 0x8161.
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 575ced7f8090c1a4e91e2daf8da9352a6a1fc7a7 upstream.
Just return an error upon failure.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60bcabd080f53561efa9288be45c128feda1a8bb upstream.
This fixes the oops discovered by the Umap2 project and Alan Stern.
The intf member needs to be set before the firmware is downloaded.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dfb5b098e0f40b68aa07f2ec55f4dd762efefbfa upstream.
When FW crashes with no_fw_recovery option, driver
waits for manual recovery with wil->mutex held, this
can easily create deadlocks.
Fix the problem by moving the wait outside the lock.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0878fff1f42c18e448ab5b8b4f6a3eb32365b5b6 upstream.
The Generic PHY driver is a catch-all PHY driver and it should preserve
whatever prior initialization has been done by boot loader or firmware
agents. For specific PHY device configuration it is expected that a
specialized PHY driver would take over that role.
Resetting the generic PHY was a bad idea that has lead to several
complaints and downstream workarounds e.g: in OpenWrt/LEDE so restore
the behavior prior to 87aa9f9c61 ("net: phy: consolidate PHY
reset in phy_init_hw()").
Reported-by: Felix Fietkau <nbd@nbd.name>
Fixes: 87aa9f9c61 ("net: phy: consolidate PHY reset in phy_init_hw()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=C1VH
-----END PGP SIGNATURE-----
Merge 4.4.79 into android-4.4
Changes in 4.4.79
disable new gcc-7.1.1 warnings for now
ir-core: fix gcc-7 warning on bool arithmetic
s5p-jpeg: don't return a random width/height
thermal: cpu_cooling: Avoid accessing potentially freed structures
ath9k: fix tx99 use after free
ath9k: fix tx99 bus error
NFC: fix broken device allocation
NFC: nfcmrvl_uart: add missing tty-device sanity check
NFC: nfcmrvl: do not use device-managed resources
NFC: nfcmrvl: use nfc-device for firmware download
NFC: nfcmrvl: fix firmware-management initialisation
nfc: Ensure presence of required attributes in the activate_target handler
nfc: Fix the sockaddr length sanitization in llcp_sock_connect
NFC: Add sockaddr length checks before accessing sa_family in bind handlers
perf intel-pt: Move decoder error setting into one condition
perf intel-pt: Improve sample timestamp
perf intel-pt: Fix missing stack clear
perf intel-pt: Ensure IP is zero when state is INTEL_PT_STATE_NO_IP
perf intel-pt: Clear FUP flag on error
Bluetooth: use constant time memory comparison for secret values
wlcore: fix 64K page support
ASoC: compress: Derive substream from stream based on direction
PM / Domains: Fix unsafe iteration over modified list of device links
PM / Domains: Fix unsafe iteration over modified list of domain providers
scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails.
iscsi-target: Add login_keys_workaround attribute for non RFC initiators
powerpc/64: Fix atomic64_inc_not_zero() to return an int
powerpc: Fix emulation of mcrf in emulate_step()
powerpc: Fix emulation of mfocrf in emulate_step()
powerpc/asm: Mark cr0 as clobbered in mftb()
af_key: Fix sadb_x_ipsecrequest parsing
PCI/PM: Restore the status of PCI devices across hibernation
ipvs: SNAT packet replies only for NATed connections
xhci: fix 20000ms port resume timeout
xhci: Fix NULL pointer dereference when cleaning up streams for removed host
usb: storage: return on error to avoid a null pointer dereference
USB: cdc-acm: add device-id for quirky printer
usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL
usb: renesas_usbhs: gadget: disable all eps when the driver stops
md: don't use flush_signals in userspace processes
x86/xen: allow userspace access during hypercalls
cx88: Fix regression in initial video standard setting
Raid5 should update rdev->sectors after reshape
s390/syscalls: Fix out of bounds arguments access
drm/amd/amdgpu: Return error if initiating read out of range on vram
drm/radeon/ci: disable mclk switching for high refresh rates (v2)
drm/radeon: Fix eDP for single-display iMac10,1 (v2)
ipmi: use rcu lock around call to intf->handlers->sender()
ipmi:ssif: Add missing unlock in error branch
f2fs: Don't clear SGID when inheriting ACLs
vfio: Fix group release deadlock
vfio: New external user group/file match
ftrace: Fix uninitialized variable in match_records()
MIPS: Fix mips_atomic_set() retry condition
MIPS: Fix mips_atomic_set() with EVA
MIPS: Negate error syscall return in trace
x86/acpi: Prevent out of bound access caused by broken ACPI tables
x86/ioapic: Pass the correct data to unmask_ioapic_irq()
MIPS: Fix MIPS I ISA /proc/cpuinfo reporting
MIPS: Save static registers before sysmips
MIPS: Actually decode JALX in `__compute_return_epc_for_insn'
MIPS: Fix unaligned PC interpretation in `compute_return_epc'
MIPS: math-emu: Prevent wrong ISA mode instruction emulation
MIPS: Send SIGILL for BPOSGE32 in `__compute_return_epc_for_insn'
MIPS: Rename `sigill_r6' to `sigill_r2r6' in `__compute_return_epc_for_insn'
MIPS: Send SIGILL for linked branches in `__compute_return_epc_for_insn'
MIPS: Fix a typo: s/preset/present/ in r2-to-r6 emulation error message
Input: i8042 - fix crash at boot time
NFS: only invalidate dentrys that are clearly invalid.
udf: Fix deadlock between writeback and udf_setsize()
target: Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce
perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
Revert "perf/core: Drop kernel samples even though :u is specified"
staging: rtl8188eu: add TL-WN722N v2 support
ceph: fix race in concurrent readdir
RDMA/core: Initialize port_num in qp_attr
drm/mst: Fix error handling during MST sideband message reception
drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req()
drm/mst: Avoid processing partially received up/down message transactions
of: device: Export of_device_{get_modalias, uvent_modalias} to modules
spmi: Include OF based modalias in device uevent
tracing: Fix kmemleak in instance_rmdir
alarmtimer: don't rate limit one-shot timers
Linux 4.4.79
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 4a4274bf2dbbd1c7a45be0c89a1687c9d2eef4a0 upstream.
In the stable linux-3.16 branch, I ran into a warning in the
wlcore driver:
drivers/net/wireless/ti/wlcore/spi.c: In function 'wl12xx_spi_raw_write':
drivers/net/wireless/ti/wlcore/spi.c:315:1: error: the frame size of 12848 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
Newer kernels no longer show the warning, but the bug is still there,
as the allocation is based on the CPU page size rather than the
actual capabilities of the hardware.
This replaces the PAGE_SIZE macro with the SZ_4K macro, i.e. 4096 bytes
per buffer.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bde717ab473668377fc65872398a102d40cb2d58 upstream.
The hard coded register 0x9864 and 0x9924 are invalid
for ar9300 chips.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf8ce1ea61b75712a154c93e40f2a5af2e4dd997 upstream.
One scenario that could lead to UAF is two threads writing
simultaneously to the "tx99" debug file. One of them would
set the "start" value to true and follow to ath9k_tx99_init().
Inside the function it would set the sc->tx99_state to true
after allocating sc->tx99skb. Then, the other thread would
execute write_file_tx99() and call ath9k_tx99_deinit().
sc->tx99_state would be freed. After that, the first thread
would continue inside ath9k_tx99_init() and call
r = ath9k_tx99_send(sc, sc->tx99_skb, &txctl);
that would make use of the freed sc->tx99_skb memory.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=vrgw
-----END PGP SIGNATURE-----
Merge 4.4.78 into android-4.4
Changes in 4.4.78
net_sched: fix error recovery at qdisc creation
net: sched: Fix one possible panic when no destroy callback
net/phy: micrel: configure intterupts after autoneg workaround
ipv6: avoid unregistering inet6_dev for loopback
net: dp83640: Avoid NULL pointer dereference.
tcp: reset sk_rx_dst in tcp_disconnect()
net: prevent sign extension in dev_get_stats()
bpf: prevent leaking pointer via xadd on unpriviledged
net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
ipv6: dad: don't remove dynamic addresses if link is down
net: ipv6: Compare lwstate in detecting duplicate nexthops
vrf: fix bug_on triggered by rx when destroying a vrf
rds: tcp: use sock_create_lite() to create the accept socket
brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()
cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE
cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES
cfg80211: Check if PMKID attribute is of expected size
irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
parisc: Report SIGSEGV instead of SIGBUS when running out of stack
parisc: use compat_sys_keyctl()
parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devs
parisc/mm: Ensure IRQs are off in switch_mm()
tools/lib/lockdep: Reduce MAX_LOCK_DEPTH to avoid overflowing lock_chain/: Depth
kernel/extable.c: mark core_kernel_text notrace
mm/list_lru.c: fix list_lru_count_node() to be race free
fs/dcache.c: fix spin lockup issue on nlru->lock
checkpatch: silence perl 5.26.0 unescaped left brace warnings
binfmt_elf: use ELF_ET_DYN_BASE only for PIE
arm: move ELF_ET_DYN_BASE to 4MB
arm64: move ELF_ET_DYN_BASE to 4GB / 4MB
powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB
s390: reduce ELF_ET_DYN_BASE
exec: Limit arg stack to at most 75% of _STK_LIM
vt: fix unchecked __put_user() in tioclinux ioctls
mnt: In umount propagation reparent in a separate pass
mnt: In propgate_umount handle visiting mounts in any order
mnt: Make propagate_umount less slow for overlapping mount propagation trees
selftests/capabilities: Fix the test_execve test
tpm: Get rid of chip->pdev
tpm: Provide strong locking for device removal
Add "shutdown" to "struct class".
tpm: Issue a TPM2_Shutdown for TPM2 devices.
mm: fix overflow check in expand_upwards()
crypto: talitos - Extend max key length for SHA384/512-HMAC and AEAD
crypto: atmel - only treat EBUSY as transient if backlog
crypto: sha1-ssse3 - Disable avx2
crypto: caam - fix signals handling
sched/topology: Fix overlapping sched_group_mask
sched/topology: Optimize build_group_mask()
PM / wakeirq: Convert to SRCU
PM / QoS: return -EINVAL for bogus strings
tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results
KVM: x86: disable MPX if host did not enable MPX XSAVE features
kvm: vmx: Do not disable intercepts for BNDCFGS
kvm: x86: Guest BNDCFGS requires guest MPX support
kvm: vmx: Check value written to IA32_BNDCFGS
kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS
Linux 4.4.78
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 8f44c9a41386729fea410e688959ddaa9d51be7c upstream.
The lower level nl80211 code in cfg80211 ensures that "len" is between
25 and NL80211_ATTR_FRAME (2304). We subtract DOT11_MGMT_HDR_LEN (24) from
"len" so thats's max of 2280. However, the action_frame->data[] buffer is
only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can
overflow.
memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN],
le16_to_cpu(action_frame->len));
Fixes: 18e2f61db3 ("brcmfmac: P2P action frame tx.")
Reported-by: "freenerguo(郭大兴)" <freenerguo@tencent.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db9d8b29d19d2801793e4419f4c6272bf8951c62 upstream.
The function, skb_complete_tx_timestamp(), used to allow passing in a
NULL pointer for the time stamps, but that was changed in commit
62bccb8cdb ("net-timestamp: Make the
clone operation stand-alone from phy timestamping"), and the existing
call sites, all of which are in the dp83640 driver, were fixed up.
Even though the kernel-doc was subsequently updated in commit
7a76a021cd ("net-timestamp: Update
skb_complete_tx_timestamp comment"), still a bug fix from Manfred
Rudigier came into the driver using the old semantics. Probably
Manfred derived that patch from an older kernel version.
This fix should be applied to the stable trees as well.
Fixes: 81e8f2e930fe ("net: dp83640: Fix tx timestamp overflow handling.")
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b866203d872d5deeafcecd25ea429d6748b5bd56 upstream.
The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an
autoneg failure case by resetting the hardware. This turns off
intterupts. Things will work themselves out if the phy polls, as it will
figure out it's state during a poll. However if the phy uses only
intterupts, the phy will stall, since interrupts are off. This patch
fixes the issue by calling config_intr after resetting the phy.
Fixes: d2fd719bcb ("net/phy: micrel: Add workaround for bad autoneg ")
Signed-off-by: Zach Brown <zach.brown@ni.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=oeNk
-----END PGP SIGNATURE-----
Merge 4.4.77 into android-4.4
Changes in 4.4.77
fs: add a VALID_OPEN_FLAGS
fs: completely ignore unknown open flags
driver core: platform: fix race condition with driver_override
bgmac: reset & enable Ethernet core before using it
mm: fix classzone_idx underflow in shrink_zones()
tracing/kprobes: Allow to create probe with a module name starting with a digit
drm/virtio: don't leak bo on drm_gem_object_init failure
usb: dwc3: replace %p with %pK
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
Add USB quirk for HVR-950q to avoid intermittent device resets
usb: usbip: set buffer pointers to NULL after free
usb: Fix typo in the definition of Endpoint[out]Request
mac80211_hwsim: Replace bogus hrtimer clockid
sysctl: don't print negative flag for proc_douintvec
sysctl: report EINVAL if value is larger than UINT_MAX for proc_douintvec
pinctrl: sh-pfc: r8a7791: Fix SCIF2 pinmux data
pinctrl: meson: meson8b: fix the NAND DQS pins
pinctrl: sunxi: Fix SPDIF function name for A83T
pinctrl: mxs: atomically switch mux and drive strength config
pinctrl: sh-pfc: Update info pointer after SoC-specific init
USB: serial: option: add two Longcheer device ids
USB: serial: qcserial: new Sierra Wireless EM7305 device ID
gfs2: Fix glock rhashtable rcu bug
x86/tools: Fix gcc-7 warning in relocs.c
x86/uaccess: Optimize copy_user_enhanced_fast_string() for short strings
ath10k: override CE5 config for QCA9377
KEYS: Fix an error code in request_master_key()
RDMA/uverbs: Check port number supplied by user verbs cmds
mqueue: fix a use-after-free in sys_mq_notify()
tools include: Add a __fallthrough statement
tools string: Use __fallthrough in perf_atoll()
tools strfilter: Use __fallthrough
perf top: Use __fallthrough
perf intel-pt: Use __fallthrough
perf thread_map: Correctly size buffer used with dirent->dt_name
perf scripting perl: Fix compile error with some perl5 versions
perf tests: Avoid possible truncation with dirent->d_name + snprintf
perf bench numa: Avoid possible truncation when using snprintf()
perf tools: Use readdir() instead of deprecated readdir_r()
perf thread_map: Use readdir() instead of deprecated readdir_r()
perf script: Use readdir() instead of deprecated readdir_r()
perf tools: Remove duplicate const qualifier
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf pmu: Fix misleadingly indented assignment (whitespace)
perf dwarf: Guard !x86_64 definitions under #ifdef else clause
perf trace: Do not process PERF_RECORD_LOST twice
perf tests: Remove wrong semicolon in while loop in CQM test
perf tools: Use readdir() instead of deprecated readdir_r() again
md: fix incorrect use of lexx_to_cpu in does_sb_need_changing
md: fix super_offset endianness in super_1_rdev_size_change
tcp: fix tcp_mark_head_lost to check skb len before fragmenting
staging: vt6556: vnt_start Fix missing call to vnt_key_init_table.
staging: comedi: fix clean-up of comedi_class in comedi_init()
ext4: check return value of kstrtoull correctly in reserved_clusters_store
x86/mm/pat: Don't report PAT on CPUs that don't support it
saa7134: fix warm Medion 7134 EEPROM read
Linux 4.4.77
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit b08b5b53a1ed2bd7a883f8fd29232c8f03604671 upstream.
Similarly to QCA6174, QCA9377 requires the CE5 configuration to be
available for other feature. Use the ath10k_pci_override_ce_config()
for it as well.
This is required for TF2.0 firmware. Previous FW revisions were
working fine without this patch.
Fixes: a70587b338 ("ath10k: configure copy engine 5 for HTT messages")
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fbcfeb8a9cc803464d6c166e7991913711c612c upstream.
mac80211_hwsim initializes a hrtimer with clockid
CLOCK_MONOTONIC_RAW. That's not supported.
Use CLOCK_MONOTONIC instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4dfd8e92956b396d3438212bc9a0be6267b8b34 upstream.
This fixes Ethernet on D-Link DIR-885L with BCM47094 SoC. Felix reported
similar fix was needed for his BCM4709 device (Buffalo WXR-1900DHP?).
I tested this for regressions on BCM4706, BCM4708A0 and BCM47081A0.
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=bwNU
-----END PGP SIGNATURE-----
Merge 4.4.76 into android-4.4
Changes in 4.4.76
ipv6: release dst on error in ip6_dst_lookup_tail
net: don't call strlen on non-terminated string in dev_set_alias()
decnet: dn_rtmsg: Improve input length sanitization in dnrmg_receive_user_skb
net: Zero ifla_vf_info in rtnl_fill_vfinfo()
af_unix: Add sockaddr length checks before accessing sa_family in bind and connect handlers
Fix an intermittent pr_emerg warning about lo becoming free.
net: caif: Fix a sleep-in-atomic bug in cfpkt_create_pfx
igmp: acquire pmc lock for ip_mc_clear_src()
igmp: add a missing spin_lock_init()
ipv6: fix calling in6_ifa_hold incorrectly for dad work
net/mlx5: Wait for FW readiness before initializing command interface
decnet: always not take dst->__refcnt when inserting dst into hash table
net: 8021q: Fix one possible panic caused by BUG_ON in free_netdev
sfc: provide dummy definitions of vswitch functions
ipv6: Do not leak throw route references
rtnetlink: add IFLA_GROUP to ifla_policy
netfilter: xt_TCPMSS: add more sanity tests on tcph->doff
netfilter: synproxy: fix conntrackd interaction
NFSv4: fix a reference leak caused WARNING messages
drm/ast: Handle configuration without P2A bridge
mm, swap_cgroup: reschedule when neeed in swap_cgroup_swapoff()
MIPS: Avoid accidental raw backtrace
MIPS: pm-cps: Drop manual cache-line alignment of ready_count
MIPS: Fix IRQ tracing & lockdep when rescheduling
ALSA: hda - Fix endless loop of codec configure
ALSA: hda - set input_path bitmap to zero after moving it to new place
drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr
usb: gadget: f_fs: Fix possibe deadlock
sysctl: enable strict writes
block: fix module reference leak on put_disk() call for cgroups throttle
mm: numa: avoid waiting on freed migrated pages
KVM: x86: fix fixing of hypercalls
scsi: sd: Fix wrong DPOFUA disable in sd_read_cache_type
scsi: lpfc: Set elsiocb contexts to NULL after freeing it
qla2xxx: Fix erroneous invalid handle message
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
net: mvneta: Fix for_each_present_cpu usage
MIPS: ath79: fix regression in PCI window initialization
net: korina: Fix NAPI versus resources freeing
MIPS: ralink: MT7688 pinmux fixes
MIPS: ralink: fix USB frequency scaling
MIPS: ralink: Fix invalid assignment of SoC type
MIPS: ralink: fix MT7628 pinmux typos
MIPS: ralink: fix MT7628 wled_an pinmux gpio
mtd: bcm47xxpart: limit scanned flash area on BCM47XX (MIPS) only
bgmac: fix a missing check for build_skb
mtd: bcm47xxpart: don't fail because of bit-flips
bgmac: Fix reversed test of build_skb() return value.
net: bgmac: Fix SOF bit checking
net: bgmac: Start transmit queue in bgmac_open
net: bgmac: Remove superflous netif_carrier_on()
powerpc/eeh: Enable IO path on permanent error
gianfar: Do not reuse pages from emergency reserve
Btrfs: fix truncate down when no_holes feature is enabled
virtio_console: fix a crash in config_work_handler
swiotlb-xen: update dev_addr after swapping pages
xen-netfront: Fix Rx stall during network stress and OOM
scsi: virtio_scsi: Reject commands when virtqueue is broken
platform/x86: ideapad-laptop: handle ACPI event 1
amd-xgbe: Check xgbe_init() return code
net: dsa: Check return value of phy_connect_direct()
drm/amdgpu: check ring being ready before using
vfio/spapr: fail tce_iommu_attach_group() when iommu_data is null
virtio_net: fix PAGE_SIZE > 64k
vxlan: do not age static remote mac entries
ibmveth: Add a proper check for the availability of the checksum features
kernel/panic.c: add missing \n
HID: i2c-hid: Add sleep between POWER ON and RESET
scsi: lpfc: avoid double free of resource identifiers
spi: davinci: use dma_mapping_error()
mac80211: initialize SMPS field in HT capabilities
x86/mpx: Use compatible types in comparison to fix sparse error
coredump: Ensure proper size of sparse core files
swiotlb: ensure that page-sized mappings are page-aligned
s390/ctl_reg: make __ctl_load a full memory barrier
be2net: fix status check in be_cmd_pmac_add()
perf probe: Fix to show correct locations for events on modules
net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV
sctp: check af before verify address in sctp_addr_id2transport
ravb: Fix use-after-free on `ifconfig eth0 down`
jump label: fix passing kbuild_cflags when checking for asm goto support
xfrm: fix stack access out of bounds with CONFIG_XFRM_SUB_POLICY
xfrm: NULL dereference on allocation failure
xfrm: Oops on error in pfkey_msg2xfrm_state()
watchdog: bcm281xx: Fix use of uninitialized spinlock.
sched/loadavg: Avoid loadavg spikes caused by delayed NO_HZ accounting
ARM64/ACPI: Fix BAD_MADT_GICC_ENTRY() macro implementation
ARM: 8685/1: ensure memblock-limit is pmd-aligned
x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
x86/mm: Fix flush_tlb_page() on Xen
ocfs2: o2hb: revert hb threshold to keep compatible
iommu/vt-d: Don't over-free page table directories
iommu: Handle default domain attach failure
iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid()
cpufreq: s3c2416: double free on driver init error path
KVM: x86: fix emulation of RSM and IRET instructions
KVM: x86/vPMU: fix undefined shift in intel_pmu_refresh()
KVM: x86: zero base3 of unusable segments
KVM: nVMX: Fix exception injection
Linux 4.4.76
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 9577b174cd0323d287c994ef0891db71666d0765 ]
When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's
message log when (correct, normally operating) apps use SRQ LIMIT events
as a trigger to post WQEs to SRQs.
Add more information to the existing debug printout for SRQ_LIMIT, and
output the warning messages only for the SRQ CATAS ERROR event.
Fixes: acba2420f9 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs")
Fixes: e0debf9cb5 ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fe68d8bfe59c561664aa87d827aa4b320eb08895 ]
Return value from be_mcc_notify_wait() contains a base completion status
together with an additional status. The base_status() macro need to be
used to access base status.
Fixes: e3a7ae2 be2net: Changing MAC Address of a VF was broken
Cc: Sathya Perla <sathya.perla@broadcom.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 23d28a859fb847fd7fcfbd31acb3b160abb5d6ae ]
When using the ibmveth driver in a KVM/QEMU based VM, it currently
always prints out a scary error message like this when it is started:
ibmveth 71000003 (unregistered net_device): unable to change
checksum offload settings. 1 rc=-2 ret_attr=71000003
This happens because the driver always tries to enable the checksum
offloading without checking for the availability of this feature first.
QEMU does not support checksum offloading for the spapr-vlan device,
thus we always get the error message here.
According to the LoPAPR specification, the "ibm,illan-options" property
of the corresponding device tree node should be checked first to see
whether the H_ILLAN_ATTRIUBTES hypercall and thus the checksum offloading
feature is available. Thus let's do this in the ibmveth driver, too, so
that the error message is really only limited to cases where something
goes wrong, and does not occur if the feature is just missing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit efb5f68f32995c146944a9d4257c3cf8eae2c4a1 ]
Mac aging is applicable only for dynamically learnt remote mac
entries. Check for user configured static remote mac entries
and skip aging.
Signed-off-by: Balakrishnan Raman <ramanb@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d0fa28f00052391b5df328f502fbbdd4444938b7 ]
I don't have any guests with PAGE_SIZE > 64k but the
code seems to be clearly broken in that case
as PAGE_SIZE / MERGEABLE_BUFFER_ALIGN will need
more than 8 bit and so the code in mergeable_ctx_to_buf_address
does not give us the actual true size.
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 738f7f647371ff4cfc9646c99dba5b58ad142db3 ]
The xgbe_init() routine returns a return code indicating success or
failure, but the return code is not checked. Add code to xgbe_init()
to issue a message when failures are seen and add code to check the
xgbe_init() return code.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 90c311b0eeead647b708a723dbdde1eda3dcad05 ]
During an OOM scenario, request slots could not be created as skb
allocation fails. So the netback cannot pass in packets and netfront
wrongly assumes that there is no more work to be done and it disables
polling. This causes Rx to stall.
The issue is with the retry logic which schedules the timer if the
created slots are less than NET_RX_SLOTS_MIN. The count of new request
slots to be pushed are calculated as a difference between new req_prod
and rsp_cons which could be more than the actual slots, if there are
unconsumed responses.
The fix is to calculate the count of newly created slots as the
difference between new req_prod and old req_prod.
Signed-off-by: Vineeth Remanan Pillai <vineethp@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 69fed99baac186013840ced3524562841296034f ]
A driver using dev_alloc_page() must not reuse a page that had to
use emergency memory reserve.
Otherwise all packets using this page will be immediately dropped,
unless for very specific sockets having SOCK_MEMALLOC bit set.
This issue might be hard to debug, because only a fraction of the RX
ring buffer would suffer from drops.
Fixes: 75354148ce ("gianfar: Add paged allocation and Rx S/G")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Claudiu Manoil <claudiu.manoil@freescale.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3894396e64994f31c3ef5c7e6f63dded0593e567 upstream.
bgmac_open() calls phy_start() to initialize the PHY state machine,
which will set the interface's carrier state accordingly, no need to
force that as this could be conflicting with the PHY state determined by
PHYLIB.
Fixes: dd4544f054 ("bgmac: driver for GBit MAC core on BCMA bus")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3897f2a69e54dd113fc9abd2daf872e5b495798 upstream.
The driver does not start the transmit queue in bgmac_open(). If the
queue was stopped prior to closing then re-opening the interface, we
would never be able to wake-up again.
Fixes: dd4544f054 ("bgmac: driver for GBit MAC core on BCMA bus")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2b13233879ca1268a1c027d4573109e5a777811 upstream.
We are checking for the Start of Frame bit in the ctl1 word, while this
bit is set in the ctl0 word instead. Read the ctl0 word and update the
check to verify that.
Fixes: 9cde94506e ("bgmac: implement scatter/gather support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 750afbf8ee9c6a1c74a1fe5fc9852146b1d72687 upstream.
Fixes: f1640c3ddeec ("bgmac: fix a missing check for build_skb")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1640c3ddeec12804bc9a21feee85fc15aca95f6 upstream.
when build_skb failed, it may occure a NULL pointer.
So add a 'NULL check' for it.
Signed-off-by: Weidong Wang <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6afb1ad88feddf2347ea779cfaf4d03d3cd40b6 upstream.
Commit beb0babfb7 ("korina: disable napi on close and restart")
introduced calls to napi_disable() that were missing before,
unfortunately this leaves a small window during which NAPI has a chance
to run, yet we just freed resources since korina_free_ring() has been
called:
Fix this by disabling NAPI first then freeing resource, and make sure
that we also cancel the restart task before doing the resource freeing.
Fixes: beb0babfb7 ("korina: disable napi on close and restart")
Reported-by: Alexandros C. Couloumbis <alex@ozo.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 129219e4950a3fcf9323b3bbd8b224c7aa873985 upstream.
This patch convert the for_each_present in on_each_cpu, instead of
applying on the present cpus it will be applied only on the online cpus.
This fix a bug reported on
http://thread.gmane.org/gmane.linux.ports.arm.kernel/468173.
Using the macro on_each_cpu (instead of a for_each_* loop) also ensures
that all the calls will be done all at once.
Fixes: f864288544 ("net: mvneta: Statically assign queues to CPUs")
Reported-by: Stefan Roese <stefan.roese@gmail.com>
Suggested-by: Jisheng Zhang <jszhang@marvell.com>
Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
efx_probe_all() calls efx->type->vswitching_probe during probe. For
SFC4000 (Falcon) NICs this function is not defined, leading to a BUG
with the top of the call stack similar to:
? efx_pci_probe_main+0x29a/0x830
efx_pci_probe+0x7d3/0xe70
vswitching_restore and vswitching_remove also need to be defined.
Fixed in mainline by:
commit 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Fixes: 6d8aaaf6f7 ("sfc: create VEB vswitch and vport above default firmware setup")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6c780a0267b8a1075f40b39851132eeaefefcff5 ]
Before attempting to initialize the command interface we must wait till
the fw_initializing bit is clear.
If we fail to meet this condition the hardware will drop our
configuration, specifically the descriptors page address. This scenario
can happen when the firmware is still executing an FLR flow and did not
finish yet so the driver needs to wait for that to finish.
Fixes: e3297246c2 ('net/mlx5_core: Wait for FW readiness on startup')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=Dwzp
-----END PGP SIGNATURE-----
Merge 4.4.75 into android-4.4
Changes in 4.4.75
fs/exec.c: account for argv/envp pointers
autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL
lib/cmdline.c: fix get_options() overflow while parsing ranges
KVM: PPC: Book3S HV: Preserve userspace HTM state properly
CIFS: Improve readdir verbosity
HID: Add quirk for Dell PIXART OEM mouse
signal: Only reschedule timers on signals timers have sent
powerpc/kprobes: Pause function_graph tracing during jprobes handling
Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
time: Fix clock->read(clock) race around clocksource changes
target: Fix kref->refcount underflow in transport_cmd_finish_abort
iscsi-target: Reject immediate data underflow larger than SCSI transfer length
drm/radeon: add a PX quirk for another K53TK variant
drm/radeon: add a quirk for Toshiba Satellite L20-183
drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating
drm/amdgpu: adjust default display clock
USB: usbip: fix nonconforming hub descriptor
rxrpc: Fix several cases where a padded len isn't checked in ticket decode
of: Add check to of_scan_flat_dt() before accessing initial_boot_params
mtd: spi-nor: fix spansion quad enable
powerpc/slb: Force a full SLB flush when we insert for a bad EA
usb: gadget: f_fs: avoid out of bounds access on comp_desc
net: phy: Initialize mdio clock at probe function
net: phy: fix marvell phy status reading
nvme/quirk: Add a delay before checking for adapter readiness
nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too
Linux 4.4.75
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 898805e0cdf7fd860ec21bf661d3a0285a3defbd upstream.
The Marvell driver incorrectly provides phydev->lp_advertising as the
logical and of the link partner's advert and our advert. This is
incorrect - this field is supposed to store the link parter's unmodified
advertisment.
This allows ethtool to report the correct link partner auto-negotiation
status.
Fixes: be937f1f89 ("Marvell PHY m88e1111 driver fix")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb1a619735b4660f21bce3e728b937640024b4ad upstream.
USB PHYs need the MDIO clock divisor enabled earlier to work.
Initialize mdio clock divisor in probe function. The ext bus
bit available in the same register will be used by mdio mux
to enable external mdio.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Fixes: ddc24ae1 ("net: phy: Broadcom iProc MDIO bus driver")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
