A couple of things missed during the v3.11 work here:
- The spi-bitbang core requires a setup() function even if it does
nothing which caused breakage when some empty setup functions were
removed after their contents were factored out into the core. While
this is clearly silly and will be fixed for v3.12 for now we just
restore the functions.
- A missing case handled in the s3c64xx driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=+brq
-----END PGP SIGNATURE-----
Merge tag 'spi-v3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of things missed during the v3.11 work here:
- The spi-bitbang core requires a setup() function even if it does
nothing which caused breakage when some empty setup functions were
removed after their contents were factored out into the core.
While this is clearly silly and will be fixed for v3.12 for now we
just restore the functions.
- A missing case handled in the s3c64xx driver"
* tag 'spi-v3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: revert master->setup function removal for altera and nuc900
spi/xilinx: Revert master->setup function removal
spi: s3c64xx: add missing check for polling mode
There are CPUs which have errata causing RDMSR of a nonexistent MSR to
not fault. We would then try to WRMSR to restore the value of that
MSR, causing a crash. Specifically, some Pentium M variants would
have this problem trying to save and restore the non-existent EFER,
causing a crash on resume.
Work around this by making sure we can write back the result at
suspend time.
Huge thanks to Christian Sünkenberg for finding the offending erratum
that finally deciphered the mystery.
Reported-and-tested-by: Johan Heinrich <onny@project-insanity.org>
Debugged-by: Christian Sünkenberg <christian.suenkenberg@student.kit.edu>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Link: http://lkml.kernel.org/r/51DDC972.3010005@student.kit.edu
Cc: <stable@vger.kernel.org> # v3.7+
snd_pcm_stop() must be called in the PCM substream lock context.
Cc: <stable@vger.kernel.org>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_stop() must be called in the PCM substream lock context.
Cc: <stable@vger.kernel.org>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_stop() must be called in the PCM substream lock context.
Cc: <stable@vger.kernel.org>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_stop() must be called in the PCM substream lock context.
Cc: <stable@vger.kernel.org>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
During large unlink operations on files with extents, we can use a lot
of CPU time. This adds a cond_resched() call when starting to examine
the next level of a multi-level extent tree. Multi-level extent trees
are rare in the first place, and this should rarely be executed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
My static checker marks everything from ntohl() as untrusted and it
complains we could have an underflow problem doing:
return (u32 *)&ary->wc_array[nchunks];
Also on 32 bit systems the upper bound check could overflow.
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
On imx51_babbage the codec clock is activated via GPIO4_26.
Provide a real clock to the sgtl5000 codec via device tree.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Need to properly enable/disable boost states when forcing a performance
level.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Covers requirements of all current asics.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The biggest change here is the OMAP change, these are larger than I'd
have liked but make the driver actually usable - during the merge window
OMAP removed support for non-DT OMAP4 boards but in doing so removed the
method of accessing DMA channels used by the ASoC drivers rendering them
unusuable.
Otherwise nothing exciting, the symmetric rates change for WM8978 is a
fix for the information we expose to userspace.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Juij
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v3.11
The biggest change here is the OMAP change, these are larger than I'd
have liked but make the driver actually usable - during the merge window
OMAP removed support for non-DT OMAP4 boards but in doing so removed the
method of accessing DMA channels used by the ASoC drivers rendering them
unusuable.
Otherwise nothing exciting, the symmetric rates change for WM8978 is a
fix for the information we expose to userspace.
While the conversion of BKL to mutex in commit 645ef9ef, the mutex
definition was put in a wrong place inside #ifdef WSND_DEBUG, which
leads to the build error. Just move it outside the ifdef.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By adding support for OCP2SCP, SPI and KS8851 I can also boot test
multi_v7_defconfig easily.
Note that if using an older u-boot, CONFIG_ARM_ATAG_DTB_COMPAT=y
may also be needed for the appended DTB based booting.
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=qf2h
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Various regression and bug fixes for ext4"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: don't allow ext4_free_blocks() to fail due to ENOMEM
ext4: fix spelling errors and a comment in extent_status tree
ext4: rate limit printk in buffer_io_error()
ext4: don't show usrquota/grpquota twice in /proc/mounts
ext4: fix warning in ext4_evict_inode()
ext4: fix ext4_get_group_number()
ext4: silence warning in ext4_writepages()
Some callers of ext4_es_remove_extent() and ext4_es_insert_extent()
may not be completely robust against ENOMEM failures (or the
consequences of reflecting ENOMEM back up to userspace may lead to
xfstest or user application failure).
To mitigate against this, when trying to insert an entry in the extent
status tree, try to shrink the inode's extent status tree before
returning ENOMEM. If there are entries which don't record information
about extents under delayed allocations, freeing one of them is
preferable to returning ENOMEM.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
In ext4_ext_map_blocks(), if we have successfully allocated the data
blocks, but then run into trouble inserting the extent into the extent
tree, most likely due to an ENOSPC condition, determine the arguments
to ext4_free_blocks() in a simpler way which is easier to prove to be
correct.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously ext4_ext_truncate() was ignoring potential error returns
from ext4_es_remove_extent() and ext4_ext_remove_space(). This can
lead to the on-diks extent tree and the extent status tree cache
getting out of sync, which is particuarlly bad, and can lead to file
system corruption and potential data loss.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
The i.MX53 PWM controller uses two cells to describe the PWM specifier.
Remove the extra unused values from the backlight DT node pwms property.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The fec/enet driver calculates MDC rate with the formula below.
ref_freq / ((MII_SPEED + 1) x 2)
The ref_freq here is the fec internal module clock, which is missing
from clk-vf610 clock driver right now. And clk-vf610 driver mistakenly
supplies RMII clock (50 MHz) as the source to fec. This results in the
situation that fec driver gets ref_freq as 50 MHz, while physically it
runs at 66 MHz (fec module clock physically sources from ipg which runs
at 66 MHz). That's why software expects MDC runs at 2.5 MHz, while the
measurement tells it runs at 3.3 MHz. And this causes the PHY KSZ8041
keeps swithing between Full and Half mode as below.
libphy: 400d0000.etherne:00 - Link is Up - 100/Full
libphy: 400d0000.etherne:00 - Link is Up - 100/Half
libphy: 400d0000.etherne:00 - Link is Up - 100/Full
libphy: 400d0000.etherne:00 - Link is Up - 100/Half
libphy: 400d0000.etherne:00 - Link is Up - 100/Full
libphy: 400d0000.etherne:00 - Link is Up - 100/Half
Add the missing module clock for ENET0 and ENET1, and correct the clock
supplying in device tree to fix above issue.
Thanks to Alison Wang <b18965@freescale.com> for debugging the issue.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
These systems all use saif0 as the mclock provider to codec sgtl5000.
Reflect that in device tree source, so that sgtl5000 can find the clock
by calling clk_get().
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The correct muxing for emi_sel clock should be
2b'00 - 396M PFD
2b'01 - PLL3
2b'10 - AXI clk root
2b'11 - 352M PFD
This patch corrects the muxing in the clock driver.
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
spll_gate was added with commit b7eed20761
"ARM: imx27: add a clock gate to activate SPLL clock".
spll_gate is missing in the devicetree clock documentation for imx27. This
patch adds it to the list of clocks in the documentation.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The current default pad configuration for UART RX and TX pads sets a 360k
pull-down and writes 1 to a reserved bit (1 << 0). It doesn't seem right to
me that in idle state, the UART has to keep the signal high against a
pull-down resistor.
This patch instead sets a 100k pull-up, which incidentally corresponds to the
register reset value for all but one (MX53_PAD_KEY_ROW0__UART4_RXD_MUX) pad,
and removes the write to the reserved bit.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
This removes all the drivers/block uses of the __cpuinit macros
from all C files.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
This removes all the remaining one-off uses of the __cpuinit macros
from all C files in the drivers/* directory.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
This removes all the uses of the __cpuinit macros from C files in
the core kernel directories (kernel, init, lib, mm, and include)
that don't really have a specific maintainer.
[1] https://lkml.org/lkml/2013/5/20/589
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
This removes all the drivers/rcu uses of the __cpuinit macros
from all C files.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@freedesktop.org>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
This removes all the net/* uses of the __cpuinit macros
from all C files.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
This removes all the drivers/acpi uses of the __cpuinit macros
from all C files.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Len Brown <lenb@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
