* refs/heads/tmp-4b2d6ba
Linux 4.4.144
ubi: fastmap: Erase outdated anchor PEBs during attach
ubi: Fix Fastmap's update_vol()
ubi: Fix races around ubi_refill_pools()
ubi: Be more paranoid while seaching for the most recent Fastmap
ubi: Rework Fastmap attach base code
ubi: Introduce vol_ignored()
clk: tegra: Fix PLL_U post divider and initial rate on Tegra30
block: do not use interruptible wait anywhere
x86/cpu: Re-apply forced caps every time CPU caps are re-read
x86/xen: Add call of speculative_store_bypass_ht_init() to PV paths
x86/bugs: Rename SSBD_NO to SSB_NO
x86/speculation, KVM: Implement support for VIRT_SPEC_CTRL/LS_CFG
x86/bugs: Rework spec_ctrl base and mask logic
x86/bugs: Remove x86_spec_ctrl_set()
x86/bugs: Expose x86_spec_ctrl_base directly
x86/bugs: Unify x86_spec_ctrl_{set_guest, restore_host}
x86/speculation: Rework speculative_store_bypass_update()
x86/speculation: Add virtualized speculative store bypass disable support
x86/bugs, KVM: Extend speculation control for VIRT_SPEC_CTRL
x86/speculation: Handle HT correctly on AMD
x86/cpufeatures: Add FEATURE_ZEN
x86/cpu/AMD: Fix erratum 1076 (CPB bit)
x86/cpufeatures: Disentangle SSBD enumeration
x86/cpufeatures: Disentangle MSR_SPEC_CTRL enumeration from IBRS
x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP
x86/cpu: Make alternative_msr_write work for 32-bit code
x86/bugs: Fix the parameters alignment and missing void
x86/bugs: Make cpu_show_common() static
x86/bugs: Fix __ssb_select_mitigation() return type
Documentation/spec_ctrl: Do some minor cleanups
proc: Use underscores for SSBD in 'status'
x86/bugs: Rename _RDS to _SSBD
x86/speculation: Make "seccomp" the default mode for Speculative Store Bypass
seccomp: Move speculation migitation control to arch code
seccomp: Add filter flag to opt-out of SSB mitigation
seccomp: Use PR_SPEC_FORCE_DISABLE
prctl: Add force disable speculation
seccomp: Enable speculation flaw mitigations
proc: Provide details on speculation flaw mitigations
nospec: Allow getting/setting on non-current task
x86/speculation: Add prctl for Speculative Store Bypass mitigation
x86/process: Allow runtime control of Speculative Store Bypass
x86/process: Optimize TIF_NOTSC switch
x86/process: Correct and optimize TIF_BLOCKSTEP switch
x86/process: Optimize TIF checks in __switch_to_xtra()
prctl: Add speculation control prctls
x86/speculation: Create spec-ctrl.h to avoid include hell
x86/bugs/AMD: Add support to disable RDS on Fam[15, 16, 17]h if requested
x86/bugs: Whitelist allowed SPEC_CTRL MSR values
x86/bugs/intel: Set proper CPU features and setup RDS
x86/bugs: Provide boot parameters for the spec_store_bypass_disable mitigation
x86/cpufeatures: Add X86_FEATURE_RDS
x86/bugs: Expose /sys/../spec_store_bypass
x86/cpu/intel: Add Knights Mill to Intel family
x86/cpu: Rename Merrifield2 to Moorefield
x86/bugs, KVM: Support the combination of guest and host IBRS
x86/bugs: Read SPEC_CTRL MSR during boot and re-use reserved bits
x86/bugs: Concentrate bug reporting into a separate function
x86/bugs: Concentrate bug detection into a separate function
x86/nospec: Simplify alternative_msr_write()
x86/amd: don't set X86_BUG_SYSRET_SS_ATTRS when running under Xen
xen: set cpu capabilities from xen_start_kernel()
selftest/seccomp: Fix the seccomp(2) signature
selftest/seccomp: Fix the flag name SECCOMP_FILTER_FLAG_TSYNC
x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist
x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPP
x86/speculation: Use IBRS if available before calling into firmware
x86/spectre_v2: Don't check microcode versions when running under hypervisors
x86/speculation: Use Indirect Branch Prediction Barrier in context switch
x86/mm: Give each mm TLB flush generation a unique ID
x86/mm: Factor out LDT init from context init
x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend
x86/speculation: Add <asm/msr-index.h> dependency
x86/speculation: Fix up array_index_nospec_mask() asm constraint
x86/speculation: Clean up various Spectre related details
x86/speculation: Correct Speculation Control microcode blacklist again
x86/speculation: Update Speculation Control microcode blacklist
x86/entry/64/compat: Clear registers for compat syscalls, to reduce speculation attack surface
x86/asm/entry/32: Simplify pushes of zeroed pt_regs->REGs
x86/pti: Mark constant arrays as __initconst
x86/cpuid: Fix up "virtual" IBRS/IBPB/STIBP feature bits on Intel
x86/cpufeatures: Clean up Spectre v2 related CPUID flags
x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support
x86/cpufeature: Blacklist SPEC_CTRL/PRED_CMD on early Spectre v2 microcodes
x86/pti: Do not enable PTI on CPUs which are not vulnerable to Meltdown
x86/msr: Add definitions for new speculation control MSRs
x86/cpufeatures: Add AMD feature bits for Speculation Control
x86/cpufeatures: Add Intel feature bits for Speculation Control
x86/cpufeatures: Add CPUID_7_EDX CPUID leaf
x86/paravirt: Make native_save_fl() extern inline
xhci: Fix perceived dead host due to runtime suspend race with event handler
skbuff: Unconditionally copy pfmemalloc in __skb_clone()
net: Don't copy pfmemalloc flag in __copy_skb_header()
tg3: Add higher cpu clock for 5762.
ptp: fix missing break in switch
net: phy: fix flag masking in __set_phy_supported
net/ipv4: Set oif in fib_compute_spec_dst
lib/rhashtable: consider param->min_size when setting initial table size
ipv6: fix useless rol32 call on hash
ipv4: Return EINVAL when ping_group_range sysctl doesn't map to user ns
mm: memcg: fix use after free in mem_cgroup_iter()
ARC: mm: allow mprotect to make stack mappings executable
ARC: Fix CONFIG_SWAP
ALSA: rawmidi: Change resized buffers atomically
fat: fix memory allocation failure handling of match_strdup()
x86/MCE: Remove min interval polling limitation
KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel.
Conflicts:
drivers/mtd/ubi/wl.c
sound/core/rawmidi.c
Change-Id: I277fe9260a764e7923ddc90e7327d9aa5865a038
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
commit 229bc19fd7aca4f37964af06e3583c1c8f36b5d6 upstream.
Don't rely on event interrupt (EINT) bit alone to detect pending port
change in resume. If no change event is detected the host may be suspended
again, oterwise roothubs are resumed.
There is a lag in xHC setting EINT. If we don't notice the pending change
in resume, and the controller is runtime suspeded again, it causes the
event handler to assume host is dead as it will fail to read xHC registers
once PCI puts the controller to D3 state.
[ 268.520969] xhci_hcd: xhci_resume: starting port polling.
[ 268.520985] xhci_hcd: xhci_hub_status_data: stopping port polling.
[ 268.521030] xhci_hcd: xhci_suspend: stopping port polling.
[ 268.521040] xhci_hcd: // Setting command ring address to 0x349bd001
[ 268.521139] xhci_hcd: Port Status Change Event for port 3
[ 268.521149] xhci_hcd: resume root hub
[ 268.521163] xhci_hcd: port resume event for port 3
[ 268.521168] xhci_hcd: xHC is not running.
[ 268.521174] xhci_hcd: handle_port_status: starting port polling.
[ 268.596322] xhci_hcd: xhci_hc_died: xHCI host controller not responding, assume dead
The EINT lag is described in a additional note in xhci specs 4.19.2:
"Due to internal xHC scheduling and system delays, there will be a lag
between a change bit being set and the Port Status Change Event that it
generated being written to the Event Ring. If SW reads the PORTSC and
sees a change bit set, there is no guarantee that the corresponding Port
Status Change Event has already been written into the Event Ring."
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 03a86f5cb1.
Remove support for usb core indexing since it is no longer
required to send controller number to remote client.
Change-Id: I8021c10037a668997782327e4c151d8cac2a2ebb
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Function provides controller id used by a remote entity
to identify which usb controller to program to initiate
data transfer.
Change-Id: Ie700363c1a4a19aeb6b51305c97298f3b4d6e387
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Unique usb core id is used to differentiate between
different usb controllers.
Change-Id: Ibd886f704e7ecedfbf035b8e5adea2852ddf25bf
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
* refs/heads/tmp-73a2b70
Linux 4.4.92
ext4: don't allow encrypted operations without keys
ext4: Don't clear SGID when inheriting ACLs
ext4: fix data corruption for mmap writes
sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs
nvme: protect against simultaneous shutdown invocations
drm/i915/bios: ignore HDMI on port A
brcmfmac: setup passive scan if requested by user-space
uwb: ensure that endpoint is interrupt
uwb: properly check kthread_run return value
iio: adc: mcp320x: Fix oops on module unload
iio: adc: mcp320x: Fix readout of negative voltages
iio: ad7793: Fix the serial interface reset
iio: core: Return error for failed read_reg
staging: iio: ad7192: Fix - use the dedicated reset function avoiding dma from stack.
iio: ad_sigma_delta: Implement a dedicated reset function
iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path of 'twl4030_madc_probe()'
iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()'
xhci: fix finding correct bus_state structure for USB 3.1 hosts
USB: fix out-of-bounds in usb_set_configuration
usb: Increase quirk delay for USB devices
USB: core: harden cdc_parse_cdc_header
USB: uas: fix bug in handling of alternate settings
scsi: sd: Do not override max_sectors_kb sysfs setting
iwlwifi: add workaround to disable wide channels in 5GHz
HID: i2c-hid: allocate hid buffers for real worst case
ftrace: Fix kmemleak in unregister_ftrace_graph
stm class: Fix a use-after-free
Drivers: hv: fcopy: restore correct transfer length
driver core: platform: Don't read past the end of "driver_override" buffer
ALSA: usx2y: Suppress kernel warning at page allocation failures
ALSA: compress: Remove unused variable
lsm: fix smack_inode_removexattr and xattr_getsecurity memleak
USB: g_mass_storage: Fix deadlock when driver is unbound
usb: gadget: mass_storage: set msg_registered after msg registered
USB: devio: Don't corrupt user memory
USB: dummy-hcd: Fix erroneous synchronization change
USB: dummy-hcd: fix infinite-loop resubmission bug
USB: dummy-hcd: fix connection failures (wrong speed)
usb: pci-quirks.c: Corrected timeout values used in handshake
ALSA: usb-audio: Check out-of-bounds access by corrupted buffer descriptor
usb: renesas_usbhs: fix usbhsf_fifo_clear() for RX direction
usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe
usb-storage: unusual_devs entry to fix write-access regression for Seagate external drives
usb: gadget: udc: atmel: set vbus irqflags explicitly
USB: gadgetfs: fix copy_to_user while holding spinlock
USB: gadgetfs: Fix crash caused by inadequate synchronization
usb: gadget: inode.c: fix unbalanced spin_lock in ep0_write
ANDROID: binder: init desired_prio.sched_policy before use it
BACKPORT: net: xfrm: support setting an output mark.
UPSTREAM: xfrm: Only add l3mdev oif to dst lookups
UPSTREAM: net: l3mdev: Add master device lookup by index
Linux 4.4.91
ttpci: address stringop overflow warning
ALSA: au88x0: avoid theoretical uninitialized access
ARM: remove duplicate 'const' annotations'
IB/qib: fix false-postive maybe-uninitialized warning
drivers: firmware: psci: drop duplicate const from psci_of_match
libata: transport: Remove circular dependency at free time
xfs: remove kmem_zalloc_greedy
i2c: meson: fix wrong variable usage in meson_i2c_put_data
md/raid10: submit bio directly to replacement disk
rds: ib: add error handle
iommu/io-pgtable-arm: Check for leaf entry before dereferencing it
parisc: perf: Fix potential NULL pointer dereference
netfilter: nfnl_cthelper: fix incorrect helper->expect_class_max
exynos-gsc: Do not swap cb/cr for semi planar formats
MIPS: IRQ Stack: Unwind IRQ stack onto task stack
netfilter: invoke synchronize_rcu after set the _hook_ to NULL
bridge: netlink: register netdevice before executing changelink
mmc: sdio: fix alignment issue in struct sdio_func
usb: plusb: Add support for PL-27A1
team: fix memory leaks
net/packet: check length in getsockopt() called with PACKET_HDRLEN
net: core: Prevent from dereferencing null pointer when releasing SKB
MIPS: Lantiq: Fix another request_mem_region() return code check
ASoC: dapm: fix some pointer error handling
usb: chipidea: vbus event may exist before starting gadget
audit: log 32-bit socketcalls
ASoC: dapm: handle probe deferrals
partitions/efi: Fix integer overflow in GPT size calculation
USB: serial: mos7840: fix control-message error handling
USB: serial: mos7720: fix control-message error handling
drm/amdkfd: fix improper return value on error
IB/ipoib: Replace list_del of the neigh->list with list_del_init
IB/ipoib: rtnl_unlock can not come after free_netdev
IB/ipoib: Fix deadlock over vlan_mutex
tty: goldfish: Fix a parameter of a call to free_irq
ARM: 8635/1: nommu: allow enabling REMAP_VECTORS_TO_RAM
iio: adc: hx711: Add DT binding for avia,hx711
iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
hwmon: (gl520sm) Fix overflows and crash seen when writing into limit attributes
sh_eth: use correct name for ECMR_MPDE bit
extcon: axp288: Use vbus-valid instead of -present to determine cable presence
igb: re-assign hw address pointer on reset after PCI error
MIPS: ralink: Fix incorrect assignment on ralink_soc
MIPS: Ensure bss section ends on a long-aligned address
ARM: dts: r8a7790: Use R-Car Gen 2 fallback binding for msiof nodes
RDS: RDMA: Fix the composite message user notification
GFS2: Fix reference to ERR_PTR in gfs2_glock_iter_next
drm: bridge: add DT bindings for TI ths8135
drm_fourcc: Fix DRM_FORMAT_MOD_LINEAR #define
FROMLIST: tracing: Add support for preempt and irq enable/disable events
FROMLIST: tracing: Prepare to add preempt and irq trace events
ANDROID: binder: fix transaction leak.
ANDROID: binder: Add tracing for binder priority inheritance.
Linux 4.4.90
fix xen_swiotlb_dma_mmap prototype
swiotlb-xen: implement xen_swiotlb_dma_mmap callback
video: fbdev: aty: do not leak uninitialized padding in clk to userspace
KVM: VMX: use cmpxchg64
ARM: pxa: fix the number of DMA requestor lines
ARM: pxa: add the number of DMA requestor lines
dmaengine: mmp-pdma: add number of requestors
cxl: Fix driver use count
KVM: VMX: remove WARN_ON_ONCE in kvm_vcpu_trigger_posted_interrupt
KVM: VMX: do not change SN bit in vmx_update_pi_irte()
timer/sysclt: Restrict timer migration sysctl values to 0 and 1
gfs2: Fix debugfs glocks dump
x86/fpu: Don't let userspace set bogus xcomp_bv
btrfs: prevent to set invalid default subvolid
btrfs: propagate error to btrfs_cmp_data_prepare caller
btrfs: fix NULL pointer dereference from free_reloc_roots()
PCI: Fix race condition with driver_override
kvm: nVMX: Don't allow L2 to access the hardware CR8
KVM: VMX: Do not BUG() on out-of-bounds guest IRQ
arm64: fault: Route pte translation faults via do_translation_fault
arm64: Make sure SPsel is always set
seccomp: fix the usage of get/put_seccomp_filter() in seccomp_get_filter()
bsg-lib: don't free job in bsg_prepare_job
nl80211: check for the required netlink attributes presence
vfs: Return -ENXIO for negative SEEK_HOLE / SEEK_DATA offsets
SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags
SMB: Validate negotiate (to protect against downgrade) even if signing off
Fix SMB3.1.1 guest authentication to Samba
powerpc/pseries: Fix parent_dn reference leak in add_dt_node()
KEYS: prevent KEYCTL_READ on negative key
KEYS: prevent creating a different user's keyrings
KEYS: fix writing past end of user-supplied buffer in keyring_read()
crypto: talitos - fix sha224
crypto: talitos - Don't provide setkey for non hmac hashing algs.
scsi: scsi_transport_iscsi: fix the issue that iscsi_if_rx doesn't parse nlmsg properly
md/raid5: preserve STRIPE_ON_UNPLUG_LIST in break_stripe_batch_list
md/raid5: fix a race condition in stripe batch
tracing: Erase irqsoff trace with empty write
tracing: Fix trace_pipe behavior for instance traces
KVM: PPC: Book3S: Fix race and leak in kvm_vm_ioctl_create_spapr_tce()
mac80211: flush hw_roc_start work before cancelling the ROC
cifs: release auth_key.response for reconnect.
f2fs: catch up to v4.14-rc1
UPSTREAM: cpufreq: schedutil: use now as reference when aggregating shared policy requests
ANDROID: add script to fetch android kernel config fragments
f2fs: reorganize stat information
f2fs: clean up flush/discard command namings
f2fs: check in-memory sit version bitmap
f2fs: check in-memory nat version bitmap
f2fs: check in-memory block bitmap
f2fs: introduce FI_ATOMIC_COMMIT
f2fs: clean up with list_{first, last}_entry
f2fs: return fs_trim if there is no candidate
f2fs: avoid needless checkpoint in f2fs_trim_fs
f2fs: relax async discard commands more
f2fs: drop exist_data for inline_data when truncated to 0
f2fs: don't allow encrypted operations without keys
f2fs: show the max number of atomic operations
f2fs: get io size bit from mount option
f2fs: support IO alignment for DATA and NODE writes
f2fs: add submit_bio tracepoint
f2fs: reassign new segment for mode=lfs
f2fs: fix a missing discard prefree segments
f2fs: use rb_entry_safe
f2fs: add a case of no need to read a page in write begin
f2fs: fix a problem of using memory after free
f2fs: remove unneeded condition
f2fs: don't cache nat entry if out of memory
f2fs: remove unused values in recover_fsync_data
f2fs: support async discard based on v4.9
f2fs: resolve op and op_flags confilcts
f2fs: remove wrong backported codes
FROMLIST: binder: fix use-after-free in binder_transaction()
UPSTREAM: ipv6: fib: Unlink replaced routes from their nodes
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
Conflicts:
fs/f2fs/crypto_key.c
fs/f2fs/f2fs_crypto.h
net/wireless/nl80211.c
sound/usb/card.c
Change-Id: I742aeaec84c7892165976b7bea3e07bdd6881d93
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
commit 5a838a13c9b4e5dd188b7a6eaeb894e9358ead0c upstream.
xhci driver keeps a bus_state structure for each hcd (usb2 and usb3)
The structure is picked based on hcd speed, but driver only compared
for HCD_USB3 speed, returning the wrong bus_state for HCD_USB31 hosts.
This caused null pointer dereference errors in bus_resume function.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DWC3 driver uses wakeup_source and allows pm_suspend only after
entering low power mode as part of runtime suspend. This prevents
PM suspend in host mode if connected device's driver doesn't
support runtime or selective suspend.
Add support in driver where user can specify using dtsi attribute
to not use wakeup source in host mode. It will allow system to enter
deep sleep or pm_suspend irrespective of runtime PM state of XHCI.
On high level below are the changes in default behavior:
-Do not use wakeup_source for DWC3 when operating in host mode.
-For host mode, devices will suspend upon PM suspend and resumed
after PM resume.
Change-Id: Ia1d450e6dd99e094e48caf9723a355b7870b54dd
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
* refs/heads/tmp-26c8156:
Linux 4.4.49
drm/i915: fix use-after-free in page_flip_completed()
ALSA: seq: Don't handle loop timeout at snd_seq_pool_done()
ALSA: seq: Fix race at creating a queue
xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend()
scsi: mpt3sas: disable ASPM for MPI2 controllers
scsi: aacraid: Fix INTx/MSI-x issue with older controllers
scsi: zfcp: fix use-after-free by not tracing WKA port open/close on failed send
netvsc: Set maximum GSO size in the right place
mac80211: Fix adding of mesh vendor IEs
ARM: 8642/1: LPAE: catch pending imprecise abort on unmask
target: Fix COMPARE_AND_WRITE ref leak for non GOOD status
target: Fix early transport_generic_handle_tmr abort scenario
target: Use correct SCSI status during EXTENDED_COPY exception
target: Don't BUG_ON during NodeACL dynamic -> explicit conversion
ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset write
hns: avoid stack overflow with CONFIG_KASAN
cpumask: use nr_cpumask_bits for parsing functions
Revert "x86/ioapic: Restore IO-APIC irq_chip retrigger callback"
selinux: fix off-by-one in setprocattr
ARC: [arcompact] brown paper bag bug in unaligned access delay slot fixup
Linux 4.4.48
base/memory, hotplug: fix a kernel oops in show_valid_zones()
x86/irq: Make irq activate operations symmetric
USB: serial: option: add device ID for HP lt2523 (Novatel E371)
usb: gadget: f_fs: Assorted buffer overflow checks.
USB: Add quirk for WORLDE easykey.25 MIDI keyboard
USB: serial: pl2303: add ATEN device ID
USB: serial: qcserial: add Dell DW5570 QDL
KVM: x86: do not save guest-unsupported XSAVE state
HID: wacom: Fix poor prox handling in 'wacom_pl_irq'
percpu-refcount: fix reference leak during percpu-atomic transition
mmc: sdhci: Ignore unexpected CARD_INT interrupts
can: bcm: fix hrtimer/tasklet termination in bcm op removal
mm, fs: check for fatal signals in do_generic_file_read()
mm/memory_hotplug.c: check start_pfn in test_pages_in_a_zone()
cifs: initialize file_info_lock
zswap: disable changing params if init fails
svcrpc: fix oops in absence of krb5 module
NFSD: Fix a null reference case in find_or_create_lock_stateid()
powerpc: Add missing error check to prom_find_boot_cpu()
powerpc/eeh: Fix wrong flag passed to eeh_unfreeze_pe()
libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices
ata: sata_mv:- Handle return value of devm_ioremap.
perf/core: Fix PERF_RECORD_MMAP2 prot/flags for anonymous memory
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes
crypto: api - Clear CRYPTO_ALG_DEAD bit before registering an alg
drm/nouveau/nv1a,nv1f/disp: fix memory clock rate retrieval
drm/nouveau/disp/gt215: Fix HDA ELD handling (thus, HDMI audio) on gt215
ext4: validate s_first_meta_bg at mount time
PCI/ASPM: Handle PCI-to-PCIe bridges as roots of PCIe hierarchies
ANDROID: security: export security_path_chown()
Linux 4.4.47
net: dsa: Bring back device detaching in dsa_slave_suspend()
qmi_wwan/cdc_ether: add device ID for HP lt2523 (Novatel E371) WWAN card
af_unix: move unix_mknod() out of bindlock
r8152: don't execute runtime suspend if the tx is not empty
bridge: netlink: call br_changelink() during br_dev_newlink()
tcp: initialize max window for a new fastopen socket
ipv6: addrconf: Avoid addrconf_disable_change() using RCU read-side lock
net: phy: bcm63xx: Utilize correct config_intr function
net: fix harmonize_features() vs NETIF_F_HIGHDMA
ax25: Fix segfault after sock connection timeout
ravb: do not use zero-length alignment DMA descriptor
openvswitch: maintain correct checksum state in conntrack actions
tcp: fix tcp_fastopen unaligned access complaints on sparc
net: systemport: Decouple flow control from __bcm_sysport_tx_reclaim
net: ipv4: fix table id in getroute response
net: lwtunnel: Handle lwtunnel_fill_encap failure
mlxsw: pci: Fix EQE structure definition
mlxsw: switchx2: Fix memory leak at skb reallocation
mlxsw: spectrum: Fix memory leak at skb reallocation
r8152: fix the sw rx checksum is unavailable
ANDROID: sdcardfs: Switch strcasecmp for internal call
ANDROID: sdcardfs: switch to full_name_hash and qstr
ANDROID: sdcardfs: Add GID Derivation to sdcardfs
ANDROID: sdcardfs: Remove redundant operation
ANDROID: sdcardfs: add support for user permission isolation
ANDROID: sdcardfs: Refactor configfs interface
ANDROID: sdcardfs: Allow non-owners to touch
ANDROID: binder: fix format specifier for type binder_size_t
ANDROID: fs: Export vfs_rmdir2
ANDROID: fs: Export free_fs_struct and set_fs_pwd
ANDROID: mnt: remount should propagate to slaves of slaves
ANDROID: sdcardfs: Switch ->d_inode to d_inode()
ANDROID: sdcardfs: Fix locking issue with permision fix up
ANDROID: sdcardfs: Change magic value
ANDROID: sdcardfs: Use per mount permissions
ANDROID: sdcardfs: Add gid and mask to private mount data
ANDROID: sdcardfs: User new permission2 functions
ANDROID: vfs: Add setattr2 for filesystems with per mount permissions
ANDROID: vfs: Add permission2 for filesystems with per mount permissions
ANDROID: vfs: Allow filesystems to access their private mount data
ANDROID: mnt: Add filesystem private data to mount points
ANDROID: sdcardfs: Move directory unlock before touch
ANDROID: sdcardfs: fix external storage exporting incorrect uid
ANDROID: sdcardfs: Added top to sdcardfs_inode_info
ANDROID: sdcardfs: Switch package list to RCU
ANDROID: sdcardfs: Fix locking for permission fix up
ANDROID: sdcardfs: Check for other cases on path lookup
ANDROID: sdcardfs: override umask on mkdir and create
Linux 4.4.46
mm, memcg: do not retry precharge charges
platform/x86: intel_mid_powerbtn: Set IRQ_ONESHOT
pinctrl: broxton: Use correct PADCFGLOCK offset
s5k4ecgx: select CRC32 helper
IB/umem: Release pid in error and ODP flow
IB/ipoib: move back IB LL address into the hard header
drm/i915: Don't leak edid in intel_crt_detect_ddc()
SUNRPC: cleanup ida information when removing sunrpc module
NFSv4.0: always send mode in SETATTR after EXCLUSIVE4
nfs: Don't increment lock sequence ID after NFS4ERR_MOVED
parisc: Don't use BITS_PER_LONG in userspace-exported swab.h header
ARC: [arcompact] handle unaligned access delay slot corner case
ARC: udelay: fix inline assembler by adding LP_COUNT to clobber list
can: ti_hecc: add missing prepare and unprepare of the clock
can: c_can_pci: fix null-pointer-deref in c_can_start() - set device pointer
s390/ptrace: Preserve previous registers for short regset write
RDMA/cma: Fix unknown symbol when CONFIG_IPV6 is not enabled
ISDN: eicon: silence misleading array-bounds warning
sysctl: fix proc_doulongvec_ms_jiffies_minmax()
mm/mempolicy.c: do not put mempolicy before using its nodemask
drm: Fix broken VT switch with video=1366x768 option
tile/ptrace: Preserve previous registers for short regset write
fbdev: color map copying bounds checking
Linux 4.4.45
arm64: avoid returning from bad_mode
selftest/powerpc: Wrong PMC initialized in pmc56_overflow test
dmaengine: pl330: Fix runtime PM support for terminated transfers
ite-cir: initialize use_demodulator before using it
blackfin: check devm_pinctrl_get() for errors
ARM: 8613/1: Fix the uaccess crash on PB11MPCore
ARM: ux500: fix prcmu_is_cpu_in_wfi() calculation
ARM: dts: imx6qdl-nitrogen6_max: fix sgtl5000 pinctrl init
arm64/ptrace: Reject attempts to set incomplete hardware breakpoint fields
arm64/ptrace: Avoid uninitialised struct padding in fpr_set()
arm64/ptrace: Preserve previous registers for short regset write - 3
arm64/ptrace: Preserve previous registers for short regset write - 2
arm64/ptrace: Preserve previous registers for short regset write
ARM: dts: da850-evm: fix read access to SPI flash
ceph: fix bad endianness handling in parse_reply_info_extra
ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs
svcrdma: avoid duplicate dma unmapping during error recovery
clocksource/exynos_mct: Clear interrupt when cpu is shut down
ubifs: Fix journal replay wrt. xattr nodes
qla2xxx: Fix crash due to null pointer access
x86/ioapic: Restore IO-APIC irq_chip retrigger callback
mtd: nand: xway: disable module support
ieee802154: atusb: do not use the stack for buffers to make them DMA able
mmc: mxs-mmc: Fix additional cycles after transmission stop
HID: corsair: fix control-transfer error handling
HID: corsair: fix DMA buffers on stack
PCI: Enumerate switches below PCI-to-PCIe bridges
fuse: clear FR_PENDING flag when moving requests out of pending queue
svcrpc: don't leak contexts on PROC_DESTROY
x86/PCI: Ignore _CRS on Supermicro X8DTH-i/6/iF/6F
tmpfs: clear S_ISGID when setting posix ACLs
ARM: dts: imx31: fix AVIC base address
ARM: dts: imx31: move CCM device node to AIPS2 bus devices
ARM: dts: imx31: fix clock control module interrupts description
perf scripting: Avoid leaking the scripting_context variable
IB/IPoIB: Remove can't use GFP_NOIO warning
IB/mlx4: When no DMFS for IPoIB, don't allow NET_IF QPs
IB/mlx4: Fix port query for 56Gb Ethernet links
IB/mlx4: Fix out-of-range array index in destroy qp flow
IB/mlx4: Set traffic class in AH
IB/mlx5: Wait for all async command completions to complete
ftrace/x86: Set ftrace_stub to weak to prevent gcc from using short jumps to it
Linux 4.4.44
pinctrl: sh-pfc: Do not unconditionally support PIN_CONFIG_BIAS_DISABLE
powerpc/ibmebus: Fix device reference leaks in sysfs interface
powerpc/ibmebus: Fix further device reference leaks
bus: vexpress-config: fix device reference leak
blk-mq: Always schedule hctx->next_cpu
ACPI / APEI: Fix NMI notification handling
block: cfq_cpd_alloc() should use @gfp
cpufreq: powernv: Disable preemption while checking CPU throttling state
NFSv4.1: nfs4_fl_prepare_ds must be careful about reporting success.
NFS: Fix a performance regression in readdir
pNFS: Fix race in pnfs_wait_on_layoutreturn
pinctrl: meson: fix gpio request disabling other modes
btrfs: fix error handling when run_delayed_extent_op fails
btrfs: fix locking when we put back a delayed ref that's too new
x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' command-line option
USB: serial: ch341: fix modem-control and B0 handling
USB: serial: ch341: fix resume after reset
drm/radeon: drop verde dpm quirks
sysctl: Drop reference added by grab_header in proc_sys_readdir
sysrq: attach sysrq handler correctly for 32-bit kernel
tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx
mnt: Protect the mountpoint hashtable with mount_lock
vme: Fix wrong pointer utilization in ca91cx42_slave_get
xhci: fix deadlock at host remove by running watchdog correctly
i2c: fix kernel memory disclosure in dev interface
i2c: print correct device invalid address
Input: elants_i2c - avoid divide by 0 errors on bad touchscreen data
USB: serial: ch341: fix open and resume after B0
USB: serial: ch341: fix control-message error handling
USB: serial: ch341: fix open error handling
USB: serial: ch341: fix initial modem-control state
USB: serial: kl5kusb105: fix line-state error handling
nl80211: fix sched scan netlink socket owner destruction
KVM: x86: Introduce segmented_write_std
KVM: x86: emulate FXSAVE and FXRSTOR
KVM: x86: add asm_safe wrapper
KVM: x86: add Align16 instruction flag
KVM: x86: flush pending lapic jump label updates on module unload
jump_labels: API for flushing deferred jump label updates
KVM: eventfd: fix NULL deref irqbypass consumer
KVM: x86: fix emulation of "MOV SS, null selector"
mm/hugetlb.c: fix reservation race when freeing surplus pages
ocfs2: fix crash caused by stale lvb with fsdlm plugin
mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}
selftests: do not require bash for the generated test
selftests: do not require bash to run netsocktests testcase
Input: i8042 - add Pegatron touchpad to noloop table
Input: xpad - use correct product id for x360w controllers
DEBUG: sched/fair: Fix sched_load_avg_cpu events for task_groups
DEBUG: sched/fair: Fix missing sched_load_avg_cpu events
net: socket: don't set sk_uid to garbage value in ->setattr()
ANDROID: configs: CONFIG_ARM64_SW_TTBR0_PAN=y
UPSTREAM: arm64: Disable PAN on uaccess_enable()
UPSTREAM: arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN
UPSTREAM: arm64: xen: Enable user access before a privcmd hvc call
UPSTREAM: arm64: Handle faults caused by inadvertent user access with PAN enabled
BACKPORT: arm64: Disable TTBR0_EL1 during normal kernel execution
BACKPORT: arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1
BACKPORT: arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro
BACKPORT: arm64: Factor out PAN enabling/disabling into separate uaccess_* macros
UPSTREAM: arm64: alternative: add auto-nop infrastructure
UPSTREAM: arm64: barriers: introduce nops and __nops macros for NOP sequences
Revert "FROMLIST: arm64: Factor out PAN enabling/disabling into separate uaccess_* macros"
Revert "FROMLIST: arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro"
Revert "FROMLIST: arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1"
Revert "FROMLIST: arm64: Disable TTBR0_EL1 during normal kernel execution"
Revert "FROMLIST: arm64: Handle faults caused by inadvertent user access with PAN enabled"
Revert "FROMLIST: arm64: xen: Enable user access before a privcmd hvc call"
Revert "FROMLIST: arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN"
ANDROID: sched/walt: fix build failure if FAIR_GROUP_SCHED=n
Linux 4.4.43
mm/init: fix zone boundary creation
ALSA: usb-audio: Add a quirk for Plantronics BT600
spi: mvebu: fix baudrate calculation for armada variant
ARM: OMAP4+: Fix bad fallthrough for cpuidle
ARM: zynq: Reserve correct amount of non-DMA RAM
powerpc: Fix build warning on 32-bit PPC
ALSA: firewire-tascam: Fix to handle error from initialization of stream data
HID: hid-cypress: validate length of report
net: vrf: do not allow table id 0
net: ipv4: Fix multipath selection with vrf
gro: Disable frag0 optimization on IPv6 ext headers
gro: use min_t() in skb_gro_reset_offset()
gro: Enter slow-path if there is no tailroom
r8152: fix rx issue for runtime suspend
r8152: split rtl8152_suspend function
ipv4: Do not allow MAIN to be alias for new LOCAL w/ custom rules
igmp: Make igmp group member RFC 3376 compliant
drop_monitor: consider inserted data in genlmsg_end
drop_monitor: add missing call to genlmsg_end
net/mlx5: Avoid shadowing numa_node
net/mlx5: Check FW limitations on log_max_qp before setting it
net: stmmac: Fix race between stmmac_drv_probe and stmmac_open
net, sched: fix soft lockup in tc_classify
ipv6: handle -EFAULT from skb_copy_bits
net: vrf: Drop conntrack data after pass through VRF device on Tx
ser_gigaset: return -ENOMEM on error instead of success
netvsc: reduce maximum GSO size
Linux 4.4.42
usb: gadget: composite: always set ep->mult to a sensible value
Revert "usb: gadget: composite: always set ep->mult to a sensible value"
tick/broadcast: Prevent NULL pointer dereference
drm/radeon: Always store CRTC relative radeon_crtc->cursor_x/y values
cx23885-dvb: move initialization of a8293_pdata
net: vxge: avoid unused function warnings
net: ti: cpmac: Fix compiler warning due to type confusion
cred/userns: define current_user_ns() as a function
staging: comedi: dt282x: tidy up register bit defines
powerpc/pci/rpadlpar: Fix device reference leaks
md: MD_RECOVERY_NEEDED is set for mddev->recovery
crypto: arm64/aes-ce - fix for big endian
crypto: arm64/aes-xts-ce: fix for big endian
crypto: arm64/sha1-ce - fix for big endian
crypto: arm64/aes-neon - fix for big endian
crypto: arm64/aes-ccm-ce: fix for big endian
crypto: arm/aes-ce - fix for big endian
crypto: arm64/ghash-ce - fix for big endian
crypto: arm64/sha2-ce - fix for big endian
s390/crypto: unlock on error in prng_tdes_read()
mmc: mmc_test: Uninitialized return value
PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend
irqchip/bcm7038-l1: Implement irq_cpu_offline() callback
target/iscsi: Fix double free in lio_target_tiqn_addtpg()
scsi: mvsas: fix command_active typo
ASoC: samsung: i2s: Fixup last IRQ unsafe spin lock call
iommu/vt-d: Flush old iommu caches for kdump when the device gets context mapped
iommu/vt-d: Fix pasid table size encoding
iommu/amd: Fix the left value check of cmd buffer
iommu/amd: Missing error code in amd_iommu_init_device()
clk: imx31: fix rewritten input argument of mx31_clocks_init()
clk: clk-wm831x: fix a logic error
hwmon: (g762) Fix overflows and crash seen when writing limit attributes
hwmon: (nct7802) Fix overflows seen when writing into limit attributes
hwmon: (ds620) Fix overflows seen when writing temperature limits
hwmon: (amc6821) sign extension temperature
hwmon: (scpi) Fix module autoload
cris: Only build flash rescue image if CONFIG_ETRAX_AXISFLASHMAP is selected
ath10k: use the right length of "background"
stable-fixup: hotplug: fix unused function warning
usb: dwc3: ep0: explicitly call dwc3_ep0_prepare_one_trb()
usb: dwc3: ep0: add dwc3_ep0_prepare_one_trb()
usb: dwc3: gadget: always unmap EP0 requests
staging: iio: ad7606: fix improper setting of oversampling pins
mei: bus: fix mei_cldev_enable KDoc
USB: serial: io_ti: bind to interface after fw download
USB: phy: am335x-control: fix device and of_node leaks
ARM: dts: r8a7794: Correct hsusb parent clock
USB: serial: kl5kusb105: abort on open exception path
ALSA: usb-audio: Fix bogus error return in snd_usb_create_stream()
usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
usb: hub: Move hub_port_disable() to fix warning if PM is disabled
usb: musb: Fix trying to free already-free IRQ 4
usb: dwc3: pci: add Intel Gemini Lake PCI ID
xhci: Fix race related to abort operation
xhci: Use delayed_work instead of timer for command timeout
usb: xhci-mem: use passed in GFP flags instead of GFP_KERNEL
USB: serial: mos7720: fix parallel probe
USB: serial: mos7720: fix parport use-after-free on probe errors
USB: serial: mos7720: fix use-after-free on probe errors
USB: serial: mos7720: fix NULL-deref at open
USB: serial: mos7840: fix NULL-deref at open
USB: serial: kobil_sct: fix NULL-deref in write
USB: serial: cyberjack: fix NULL-deref at open
USB: serial: oti6858: fix NULL-deref at open
USB: serial: io_edgeport: fix NULL-deref at open
USB: serial: ti_usb_3410_5052: fix NULL-deref at open
USB: serial: garmin_gps: fix memory leak on failed URB submit
USB: serial: iuu_phoenix: fix NULL-deref at open
USB: serial: io_ti: fix I/O after disconnect
USB: serial: io_ti: fix another NULL-deref at open
USB: serial: io_ti: fix NULL-deref at open
USB: serial: spcp8x5: fix NULL-deref at open
USB: serial: keyspan_pda: verify endpoints at probe
USB: serial: pl2303: fix NULL-deref at open
USB: serial: quatech2: fix sleep-while-atomic in close
USB: serial: omninet: fix NULL-derefs at open and disconnect
usb: xhci: hold lock over xhci_abort_cmd_ring()
xhci: Handle command completion and timeout race
usb: host: xhci: Fix possible wild pointer when handling abort command
usb: xhci: fix return value of xhci_setup_device()
xhci: free xhci virtual devices with leaf nodes first
usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Apollo Lake
xhci: workaround for hosts missing CAS bit
usb: xhci: fix possible wild pointer
usb: dwc3: core: avoid Overflow events
usb: gadget: composite: Test get_alt() presence instead of set_alt()
USB: dummy-hcd: fix bug in stop_activity (handle ep0)
USB: fix problems with duplicate endpoint addresses
USB: gadgetfs: fix checks of wTotalLength in config descriptors
USB: gadgetfs: fix use-after-free bug
USB: gadgetfs: fix unbounded memory allocation bug
usb: gadgetfs: restrict upper bound on device configuration size
usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
usb: musb: dsps: implement clear_ep_rxintr() callback
usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
KVM: MIPS: Flush KVM entry code from icache globally
KVM: x86: reset MMU on KVM_SET_VCPU_EVENTS
mac80211: initialize fast-xmit 'info' later
ARM: davinci: da850: don't add emac clock to lookup table twice
ALSA: usb-audio: Fix irq/process data synchronization
ALSA: hda - Apply asus-mode8 fixup to ASUS X71SL
ALSA: hda - Fix up GPIO for ASUS ROG Ranger
Linux 4.4.41
net: mvpp2: fix dma unmapping of TX buffers for fragments
sg_write()/bsg_write() is not fit to be called under KERNEL_DS
kconfig/nconf: Fix hang when editing symbol with a long prompt
target/user: Fix use-after-free of tcmu_cmds if they are expired
powerpc: Convert cmp to cmpd in idle enter sequence
powerpc/ps3: Fix system hang with GCC 5 builds
nfs_write_end(): fix handling of short copies
libceph: verify authorize reply on connect
PCI: Check for PME in targeted sleep state
Input: drv260x - fix input device's parent assignment
media: solo6x10: fix lockup by avoiding delayed register write
IB/cma: Fix a race condition in iboe_addr_get_sgid()
IB/multicast: Check ib_find_pkey() return value
IPoIB: Avoid reading an uninitialized member variable
IB/mad: Fix an array index check
fgraph: Handle a case where a tracer ignores set_graph_notrace
platform/x86: asus-nb-wmi.c: Add X45U quirk
ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it
kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
KVM: PPC: Book3S HV: Don't lose hardware R/C bit updates in H_PROTECT
KVM: PPC: Book3S HV: Save/restore XER in checkpointed register state
md/raid5: limit request size according to implementation limits
sc16is7xx: Drop bogus use of IRQF_ONESHOT
s390/vmlogrdr: fix IUCV buffer allocation
firmware: fix usermode helper fallback loading
ARC: mm: arc700: Don't assume 2 colours for aliasing VIPT dcache
scsi: avoid a permanent stop of the scsi device's request queue
scsi: zfcp: fix rport unblock race with LUN recovery
scsi: zfcp: do not trace pure benign residual HBA responses at default level
scsi: zfcp: fix use-after-"free" in FC ingress path after TMF
scsi: megaraid_sas: Do not set MPI2_TYPE_CUDA for JBOD FP path for FW which does not support JBOD sequence map
scsi: megaraid_sas: For SRIOV enabled firmware, ensure VF driver waits for 30secs before reset
vt: fix Scroll Lock LED trigger name
block: protect iterate_bdevs() against concurrent close
mei: request async autosuspend at the end of enumeration
drivers/gpu/drm/ast: Fix infinite loop if read fails
drm/gma500: Add compat ioctl
drm/radeon: add additional pci revision to dpm workaround
drm/radeon: Hide the HW cursor while it's out of bounds
drm/radeon: Also call cursor_move_locked when the cursor size changes
drm/nouveau/i2c/gk110b,gm10x: use the correct implementation
drm/nouveau/fifo/gf100-: protect channel preempt with subdev mutex
drm/nouveau/ltc: protect clearing of comptags with mutex
drm/nouveau/bios: require checksum to match for fast acpi shadow method
drm/nouveau/kms: lvds panel strap moved again on maxwell
ACPI / video: Add force_native quirk for HP Pavilion dv6
ACPI / video: Add force_native quirk for Dell XPS 17 L702X
staging: comedi: ni_mio_common: fix E series ni_ai_insn_read() data
staging: comedi: ni_mio_common: fix M Series ni_ai_insn_read() data mask
thermal: hwmon: Properly report critical temperature in sysfs
clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk
timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion
regulator: stw481x-vmmc: fix ages old enable error
mmc: sdhci: Fix recovery from tuning timeout
ath9k: Really fix LED polarity for some Mini PCI AR9220 MB92 cards.
cfg80211/mac80211: fix BSS leaks when abandoning assoc attempts
rtlwifi: Fix enter/exit power_save
ssb: Fix error routine when fallback SPROM fails
Linux 4.4.40
ppp: defer netns reference release for ppp channel
driver core: fix race between creating/querying glue dir and its cleanup
xfs: set AGI buffer type in xlog_recover_clear_agi_bucket
arm/xen: Use alloc_percpu rather than __alloc_percpu
xen/gntdev: Use VM_MIXEDMAP instead of VM_IO to avoid NUMA balancing
tpm xen: Remove bogus tpm_chip_unregister
kernel/debug/debug_core.c: more properly delay for secondary CPUs
kernel/watchdog: use nmi registers snapshot in hardlockup handler
CIFS: Fix a possible memory corruption in push locks
CIFS: Fix missing nls unload in smb2_reconnect()
CIFS: Fix a possible memory corruption during reconnect
ASoC: intel: Fix crash at suspend/resume without card registration
dm space map metadata: fix 'struct sm_metadata' leak on failed create
dm crypt: mark key as invalid until properly loaded
dm flakey: return -EINVAL on interval bounds error in flakey_ctr()
blk-mq: Do not invoke .queue_rq() for a stopped queue
usb: gadget: composite: always set ep->mult to a sensible value
exec: Ensure mm->user_ns contains the execed files
fs: exec: apply CLOEXEC before changing dumpable task flags
mm/vmscan.c: set correct defer count for shrinker
loop: return proper error from loop_queue_rq()
f2fs: set ->owner for debugfs status file's file_operations
ext4: do not perform data journaling when data is encrypted
ext4: return -ENOMEM instead of success
ext4: reject inodes with negative size
ext4: add sanity checking to count_overhead()
ext4: fix in-superblock mount options processing
ext4: use more strict checks for inodes_per_block on mount
ext4: fix stack memory corruption with 64k block size
ext4: fix mballoc breakage with 64k block size
crypto: caam - fix AEAD givenc descriptors
ptrace: Capture the ptracer's creds not PT_PTRACE_CAP
mm: Add a user_ns owner to mm_struct and fix ptrace permission checks
block_dev: don't test bdev->bd_contains when it is not stable
btrfs: make file clone aware of fatal signals
Btrfs: don't BUG() during drop snapshot
Btrfs: fix memory leak in do_walk_down
Btrfs: don't leak reloc root nodes on error
Btrfs: return gracefully from balance if fs tree is corrupted
Btrfs: bail out if block group has different mixed flag
Btrfs: fix memory leak in reading btree blocks
clk: ti: omap36xx: Work around sprz319 advisory 2.1
ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq
ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO
ALSA: hda - fix headset-mic problem on a Dell laptop
ALSA: hda - ignore the assoc and seq when comparing pin configurations
ALSA: hda/ca0132 - Add quirk for Alienware 15 R2 2016
ALSA: hiface: Fix M2Tech hiFace driver sampling rate change
ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks
USB: UHCI: report non-PME wakeup signalling for Intel hardware
usb: gadget: composite: correctly initialize ep->maxpacket
usb: gadget: f_uac2: fix error handling at afunc_bind
usb: hub: Fix auto-remount of safely removed or ejected USB-3 devices
USB: cdc-acm: add device id for GW Instek AFG-125
USB: serial: kl5kusb105: fix open error path
USB: serial: option: add dlink dwm-158
USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041
Btrfs: fix qgroup rescan worker initialization
btrfs: store and load values of stripes_min/stripes_max in balance status item
Btrfs: fix tree search logic when replaying directory entry deletes
btrfs: limit async_work allocation and worker func duration
ANDROID: trace: net: use %pK for kernel pointers
ANDROID: android-base: Enable QUOTA related configs
net: ipv4: Don't crash if passing a null sk to ip_rt_update_pmtu.
net: inet: Support UID-based routing in IP protocols.
Revert "net: ipv6: fix virtual tunneling build"
net: core: add UID to flows, rules, and routes
net: core: Add a UID field to struct sock.
Revert "net: core: Support UID-based routing."
Revert "net: core: Handle 'sk' being NULL in UID-based routing"
Revert "ANDROID: net: fix 'const' warnings"
Revert "ANDROID: net: fib: remove duplicate assignment"
Revert "ANDROID: net: core: fix UID-based routing"
UPSTREAM: efi/arm64: Don't apply MEMBLOCK_NOMAP to UEFI memory map mapping
UPSTREAM: arm64: enable CONFIG_DEBUG_RODATA by default
goldfish: enable CONFIG_INET_DIAG_DESTROY
sched/walt: kill {min,max}_capacity
sched: fix wrong truncation of walt_avg
ANDROID: dm verity: add minimum prefetch size
Linux 4.4.39
crypto: rsa - Add Makefile dependencies to fix parallel builds
hotplug: Make register and unregister notifier API symmetric
batman-adv: Check for alloc errors when preparing TT local data
m68k: Fix ndelay() macro
arm64: futex.h: Add missing PAN toggling
can: peak: fix bad memory access and free sequence
can: raw: raw_setsockopt: limit number of can_filter that can be set
crypto: mcryptd - Check mcryptd algorithm compatibility
perf/x86: Fix full width counter, counter overflow
locking/rtmutex: Use READ_ONCE() in rt_mutex_owner()
locking/rtmutex: Prevent dequeue vs. unlock race
zram: restrict add/remove attributes to root only
parisc: Fix TLB related boot crash on SMP machines
parisc: Remove unnecessary TLB purges from flush_dcache_page_asm and flush_icache_page_asm
parisc: Purge TLB before setting PTE
powerpc/eeh: Fix deadlock when PE frozen state can't be cleared
Conflicts:
arch/arm64/kernel/traps.c
drivers/usb/dwc3/core.h
drivers/usb/dwc3/ep0.c
drivers/usb/gadget/function/f_fs.c
drivers/usb/host/xhci-mem.c
drivers/usb/host/xhci-ring.c
drivers/usb/host/xhci.c
drivers/video/fbdev/core/fbcmap.c
include/trace/events/sched.h
mm/vmscan.c
Change-Id: I3faa0010ecb98972cd8e6470377a493b56d95f89
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
commit 1c111b6c3844a142e03bcfc2fa17bfbdea08e9dc upstream.
Current abort operation has race.
xhci_handle_command_timeout()
xhci_abort_cmd_ring()
xhci_write_64(CMD_RING_ABORT)
xhci_handshake(5s)
do {
check CMD_RING_RUNNING
udelay(1)
...
COMP_CMD_ABORT event
COMP_CMD_STOP event
xhci_handle_stopped_cmd_ring()
restart cmd_ring
CMD_RING_RUNNING become 1 again
} while ()
return -ETIMEDOUT
xhci_write_64(CMD_RING_ABORT)
/* can abort random command */
To do abort operation correctly, we have to wait both of COMP_CMD_STOP
event and negation of CMD_RING_RUNNING.
But like above, while timeout handler is waiting negation of
CMD_RING_RUNNING, event handler can restart cmd_ring. So timeout
handler never be notice negation of CMD_RING_RUNNING, and retry of
CMD_RING_ABORT can abort random command (BTW, I guess retry of
CMD_RING_ABORT was workaround of this race).
To fix this race, this moves xhci_handle_stopped_cmd_ring() to
xhci_abort_cmd_ring(). And timeout handler waits COMP_CMD_STOP event.
At this point, timeout handler is owner of cmd_ring, and safely
restart cmd_ring by using xhci_handle_stopped_cmd_ring().
[FWIW, as bonus, this way would be easily extend to add CMD_RING_PAUSE
operation]
[locks edited as patch is rebased on other locking fixes -Mathias]
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb4d5ce588c5ff68e0fdd30370a0e6bc2c0a736b upstream.
This is preparation to fix abort operation race (See "xhci: Fix race
related to abort operation"). To make timeout sleepable, use
delayed_work instead of timer.
[change a newly added pending timer fix to pending work -Mathias]
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 346e99736c3ce328fd42d678343b70243aca5f36 upstream.
If a device is unplugged and replugged during Sx system suspend
some Intel xHC hosts will overwrite the CAS (Cold attach status) flag
and no device connection is noticed in resume.
A device in this state can be identified in resume if its link state
is in polling or compliance mode, and the current connect status is 0.
A device in this state needs to be warm reset.
Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8
Observed on Cherryview and Apollolake as they go into compliance mode
if LFPS times out during polling, and re-plugged devices are not
discovered at resume.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Embedded High-speed Host Electrical Test (EHSET) procedure defines
the SINGLE_STEP_SET_FEATURE test for an embedded USB Host port. Upon
activating this test mode, the SETUP stage of a GetDescriptor request
is sent and followed by a delay of 15 seconds before finishing with
the DATA and STATUS stages. The idea is that this delay will give the
test operator sufficient time to configure the oscilloscope to perform
a measurement of the response time delay between the latter two stages.
This test is not implemented by the EHCI/xHCI host controller itself but
can be implemented in software. Similar to commit 9841f37a1c ("usb:
ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET"), this patch
adds such support to the xHCI driver.
Change-Id: I638ca552f6dae735147378f3e6f6068e0003094b
Signed-off-by: Jack Pham <jackp@codeaurora.org>
PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will
remove the xhci controller from the PCI bus when the last USB device is
disconnected.
Add a flag to indicate that the host is being removed to avoid queueing
configure_endpoint commands for the dropped endpoints.
For PCI hotplugged controllers this will prevent 5 second command timeouts
For static xhci controllers the configure_endpoint command is not needed
in the removal case as everything will be returned, freed, and the
controller is reset.
For now the flag is only set for PCI connected host controllers.
Change-Id: Ic0b58b6be29d3c797b21ef5637e4004d08cc0b5c
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: 98d74f9ceaefc2b6c4a6440050163a83be0abede
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[cchiluve@codeaurora.org: resovle merge conflicts]
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Implement APIs to dynamically allocate and free secondary
event rings based upon interrupter number. Also add exported
APIs in usb core layer which allows secondary event ring
management via remote processor entity.
Change-Id: I5ee7d44d6cad8e35e22d3c1a027a1eec5d208585
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
commit 98d74f9ceaefc2b6c4a6440050163a83be0abede upstream.
PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will
remove the xhci controller from the PCI bus when the last USB device is
disconnected.
Add a flag to indicate that the host is being removed to avoid queueing
configure_endpoint commands for the dropped endpoints.
For PCI hotplugged controllers this will prevent 5 second command timeouts
For static xhci controllers the configure_endpoint command is not needed
in the removal case as everything will be returned, freed, and the
controller is reset.
For now the flag is only set for PCI connected host controllers.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig
to clean up various abuses of headers in there. The patch to rename the
io-64-nonatomic-*.h headers caused some conflicts with new users, so I
added a workaround that we can remove in the next merge window.
The only other patch is a warning fix from Marek Vasut
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAVjzaf2CrR//JCVInAQImmhAA20fZ91sUlnA5skKNPT1phhF6Z7UF2Sx5
nPKcHQD3HA3lT1OKfPBYvCo+loYflvXFLaQThVylVcnE/8ecAEMtft4nnGW2nXvh
sZqHIZ8fszTB53cynAZKTjdobD1wu33Rq7XRzg0ugn1mdxFkOzCHW/xDRvWRR5TL
rdQjzzgvn2PNlqFfHlh6cZ5ykShM36AIKs3WGA0H0Y/aYsE9GmDOAUp41q1mLXnA
4lKQaIxoeOa+kmlsUB0wEHUecWWWJH4GAP+CtdKzTX9v12bGNhmiKUMCETG78BT3
uL8irSqaViNwSAS9tBxSpqvmVUsa5aCA5M3MYiO+fH9ifd7wbR65g/wq39D3Pc01
KnZ3BNVRW5XSA3c86pr8vbg/HOynUXK8TN0lzt6rEk8bjoPBNEDy5YWzy0t6reVe
wX65F+ver8upjOKe9yl2Jsg+5Kcmy79GyYjLUY3TU2mZ+dIdScy/jIWatXe/OTKZ
iB4Ctc4MDe9GDECmlPOWf98AXqsBUuKQiWKCN/OPxLtFOeWBvi4IzvFuO8QvnL9p
jZcRDmIlIWAcDX/2wMnLjV+Hqi3EeReIrYznxTGnO7HHVInF555GP51vFaG5k+SN
smJQAB0/sostmC1OCCqBKq5b6/li95/No7+0v0SUhJJ5o76AR5CcNsnolXesw1fu
vTUkB/I66Hk=
=dQKG
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"The asm-generic changes for 4.4 are mostly a series from Christoph
Hellwig to clean up various abuses of headers in there. The patch to
rename the io-64-nonatomic-*.h headers caused some conflicts with new
users, so I added a workaround that we can remove in the next merge
window.
The only other patch is a warning fix from Marek Vasut"
* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h
asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations
gpio-mxc: stop including <asm-generic/bug>
n_tracesink: stop including <asm-generic/bug>
n_tracerouter: stop including <asm-generic/bug>
mlx5: stop including <asm-generic/kmap_types.h>
hifn_795x: stop including <asm-generic/kmap_types.h>
drbd: stop including <asm-generic/kmap_types.h>
move count_zeroes.h out of asm-generic
move io-64-nonatomic*.h out of asm-generic
The readq() and writeq() helpers are available in the
asm-generic/io-64-nonatomic-hi-lo.h and asm-generic/io-64-nonatomic-lo-hi.h
headers. Replace custom implementation by the generic helpers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci versions 1.0 and later report the untransferred data remaining in a
TD a bit differently than older hosts.
We used to have separate functions for these, and needed to check host
version before calling the right function.
Now Mediatek host has an additional quirk on how it uses the TD Size
field for remaining data. To prevent yet another function for calculating
remainder we instead want to make one quirk friendly unified function.
Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB 3.1 adds different types of Get Port Status request.
The Get Extended Port Status request returns 4 additional bytes
after the normal portstatus and portchange words containing
link speed and lane information about a connected enhanced super
speed device
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB 3.1 capable xhci controllers use a new default speed ID "5" in the
PORTSC register to represent a 10Gbps connection speed of a SuperSpeedPlus
device
Make sure the xhci driver can handle the returned SuperSpeedPlus speed ID
properly
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci 1.1 controllers that support USB 3.1 must provide a protocol speed ID
(PSI) list to inform the driver of the supported speeds.
The PSI list can be read from the xhci supported protocol extended
capabilities.
The PSI values will be used to create a USB 3.1 SuperSpeedPlus capability
descriptor for the xhci USB 3.1 roothub.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci 1.1 capable controllers have a new HCCPARAMS2 registers
with bits indicating support for new xhci 1.1 capabilities.
Also add support for the new xhci 1.1 bits in the config operational
opertational register that used to be reserved
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
[modified and left out parts not related to HCCPARAMS2 -Mathias]
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch enables xhci driver to support SPC by handling
Stopped - Short Packet event in transfer event path.
If SPC = '1' and the stop endpoint command is executed, after a Short
Packet condition has been detected, but before the end of the TD has been
reached, (i.e. the TD is in progress for pipe), then a Transfer Event TRB
with its Completion Code set to Stopped - Short Packet and its TRB
Transfer Length set to value of the EDTLA shall be forced for the
interrupted TRB, irrespective of whether its IOC or ISP flags are set.
This Transfer Event TRB will precede the Command Completion Event TRB for
the command, and is referred to as a Stopped Transfer Event.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the Contiguous Frame ID Capability is supported (CFC = 1),
then the xHC shall match the Frame ID in every Isoch TD with
SIA = 0 against the Frame Index of the MFINDEX register. This
rule ensures resynchronization of Isoch TDs even if some are
dropped due to Missed Service Errors or Stopping the endpoint.
This patch enables xHCI driver to support CFC by calculating
and setting the Frame ID field of an Isoch TRB.
[made some dbg messages checkpatch friendly -Mathias]
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the link is just waken, it's in Resume state, and driver sets PLS to
U0. This refers to Phase 1. Phase 2 refers to when the link has completed
the transition from Resume state to U0.
With the fix of xhci: report U3 when link is in resume state, it also
exposes an issue that usb3 roothub and controller can suspend right
after phase 1, and this causes a hard hang in controller.
To fix the issue, we need to prevent usb3 bus suspend if any port is
resuming in phase 1.
[merge separate USB2 and USB3 port resume checking to one -Mathias]
Cc: <stable@vger.kernel.org>
Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This resolves a merge issue in musb_core.c and we want the fixes that
were in Linus's tree in this branch as well for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HCD core allocates memory for HCD private data in
usb_create_[shared_]hcd() so make use of that
mechanism to allocate the struct xhci_hcd.
Introduce struct xhci_driver_overrides to provide
the size of HCD private data and hc_driver operation
overrides. As of now we only need to override the
reset and start methods.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Regression in commit 638139eb95 ("usb: hub: allow to process more usb
hub events in parallel")
The regression resulted in intermittent failure to initialise a 10-port
hub (with three internal VL812 4-port hub controllers) on boot, with a
failure rate of around 8%, due to multiple race conditions when
accessing addr_dev and slot_id in struct xhci_hcd.
This regression also exposed a problem with xhci_setup_device, which
"should be protected by the usb_address0_mutex" but no longer is due to
commit 6fecd4f2a5 ("USB: separate usb_address0 mutexes for each bus")
With separate buses (and locks) it is no longer the case that a single
lock will protect xhci_setup_device from accesses by two parallel
threads processing events on the two buses.
Fix this by adding a mutex to protect addr_dev and slot_id in struct
xhci_hcd, and by making the assignment of slot_id atomic.
Fixes multiple boot errors:
[ 0.583008] xhci_hcd 0000:00:14.0: Bad Slot ID 2
[ 0.583009] xhci_hcd 0000:00:14.0: Could not allocate xHCI USB device data structures
[ 0.583012] usb usb1-port3: couldn't allocate usb_device
And:
[ 0.637409] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.637417] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.637421] usb usb1-port1: couldn't allocate usb_device
And:
[ 0.753372] xhci_hcd 0000:00:14.0: ERROR: unexpected setup context command completion code 0x0.
[ 0.753373] usb 1-3: hub failed to enable device, error -22
[ 0.753400] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.753402] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.753403] usb usb1-port3: couldn't allocate usb_device
And:
[ 11.018386] usb 1-3: device descriptor read/all, error -110
And:
[ 5.753838] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
Tested with 200 reboots, resulting in no USB hub init related errors.
Fixes: 638139eb95 ("usb: hub: allow to process more usb hub events in parallel")
Link: https://lkml.kernel.org/g/CAP-bSRb=A0iEYobdGCLpwynS7pkxpt_9ZnwyZTPVAoy0Y=Zo3Q@mail.gmail.com
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Cc: <stable@vger.kernel.org> # 3.18+
[changed git commit description style for checkpatch -Mathias]
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Our event ring consists of only one segment, and we risk filling
the event ring in case we get isoc transfers with short intervals
such as webcams that fill a TD every microframe (125us)
With 64 TRB segment size one usb camera could fill the event ring in 8ms.
A setup with several cameras and other devices can fill up the
event ring as it is shared between all devices.
This has occurred when uvcvideo queues 5 * 32TD URBs which then
get cancelled when the video mode changes. The cancelled URBs are returned
in the xhci interrupt context and blocks the interrupt handler from
handling the new events.
A full event ring will block xhci from scheduling traffic and affect all
devices conneted to the xhci, will see errors such as Missed Service
Intervals for isoc devices, and and Split transaction errors for LS/FS
interrupt devices.
Increasing the TRB_PER_SEGMENT will also increase the default endpoint ring
size, which is welcome as for most isoc transfer we had to dynamically
expand the endpoint ring anyway to be able to queue the 5 * 32TDs uvcvideo
queues.
The default size used to be 64 TRBs per segment
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 27082e2654 ("xhci: Clear the host side toggle manually")
Turns out this fix to enable soft resetting endpoints wasn't mature enough.
It caused regression with some usb DVB-T devices and needs some more tuning
to get the endpiont ring pointers set correctly.
The original commit was tagged for stable 3.18, and should be reverted
from there as well.
Cc: stable <stable@vger.kernel.org> # v3.18
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xhci in Intel Sunrisepoint and Cherryview platforms need a driver
workaround for a Stuck PME that might either block PME events in suspend,
or create spurious PME events preventing runtime suspend.
Workaround is to clear a internal PME flag, BIT(28) in a vendor specific
PMCTRL register at offset 0x80a4, in both suspend resume callbacks
Without this, xhci connected usb devices might never be able to wake up the
system from suspend, or prevent device from going to suspend (xhci d3)
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a control transfer has a short data stage, the xHCI controller generates
two transfer events: a COMP_SHORT_TX event that specifies the untransferred
amount, and a COMP_SUCCESS event. But when the data stage is not short, only the
COMP_SUCCESS event occurs. Therefore, xhci-hcd must set urb->actual_length to
urb->transfer_buffer_length while processing the COMP_SUCCESS event, unless
urb->actual_length was set already by a previous COMP_SHORT_TX event.
The driver checks this by seeing whether urb->actual_length == 0, but this alone
is the wrong test, as it is entirely possible for a short transfer to have an
urb->actual_length = 0.
This patch changes the xhci driver to rely on a new td->urb_length_set flag,
which is set to true when a COMP_SHORT_TX event is received and the URB length
updated at that stage.
This fixes a bug which affected the HSO plugin, which relies on URBs with
urb->actual_length == 0 to halt re-submitting the RX URB in the control
endpoint.
Cc: <stable@vger.kernel.org>
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Main benefit of this is to get xhci connected USB scanners to work.
Some devices use a clear endpoint halt request as a 'soft reset' even if
the endpoint is not halted. This will clear the toggle and sequence on the
device side. xHCI however refuses to reset a non-halted endpoint, so instead
we need to issue a configure endpoint command on xHCI to clear its host side
toggle and sequence, and get it in sync with the device side.
Tested-by: Mike Mammarella <mikem@crystalorb.net>
Cc: <stable@vger.kernel.org> # v3.18
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Include the high order bit fields for Max scratchpad buffers when
calculating how many scratchpad buffers are needed.
I'm suprised this hasn't caused more issues, we never allocated more than
32 buffers even if xhci needed more. Either we got lucky and xhci never
really used past that area, or then we got enough zeroed dma memory anyway.
Should be backported as far back as possible
Reported-by: Tim Chen <tim.c.chen@linux.intel.com>
Tested-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To help debugging xhci problems.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some parameters are not used by functions in xhci-mem.c, just
remove it.
Changes compared to v1:
- Rebase to the latest usb-next branch
Signed-off-by: Lin Wang <lin.x.wang@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parameter 'xhci' is no longer be used in function xhci_handshake(),
just remove it.
Signed-off-by: Lin Wang <lin.x.wang@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to xHCI specification, PORT_DEV_REMOVE(bit 30) in PORTSC
true means "Device is non-removable".
Reported-by: Juro Bystricky <jurobystricky@hotmail.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Endpoints halted on errors, and endpoints stopped manually both used
the same ep->stopped_td to store the halted or stopped td. this causes
confusion and possible races.
There is no longer a need to use the ep->stopped_td variable to store
the halted TD. A halted endpoint is handled immediately and we can pass
it to the handling function directly.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When system is being suspended, if host device is not allowed to do wakeup,
xhci_suspend() needs to clear all root port wake on bits. Otherwise, some
platforms may generate spurious wakeup, even if PCI PME# is disabled.
The initial commit ff8cbf250b ("xhci: clear root port wake on bits"),
which also got into stable, turned out to not work correctly and had to
be reverted, and is now rewritten.
Cc: stable <stable@vger.kernel.org> # v3.2+
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
[Mathias Nyman: reword commit message]
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of building all of the xHCI code into a single module, separate
it out into the core (xhci-hcd), PCI (xhci-pci, now selected by the new
config option CONFIG_USB_XHCI_PCI), and platform (xhci-plat) drivers.
Also update the PCI/platform drivers with module descriptions/licenses
and have them register their respective drivers in their initcalls.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of calling xhci_compliance_mode_recovery_timer_quirk_check() again
in the PCI suspend path, just check for XHCI_COMP_MODE_QUIRK which will
have been set based on xhci_compliance_mode_recovery_timer_quirk_check()
in xhci_init().
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the struct hc_driver is mostly the same across the xhci-pci,
xhci-plat, and the upcoming xhci-tegra driver, introduce the function
xhci_init_driver() which will populate the hc_driver with the default
xHCI operations. The caller must supply a setup function which will
be used as the hc_driver's reset callback.
Note that xhci-plat also overrides the default ->start() callback so
that it can do rcar-specific initialization.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lately (with the use of uas / bulk-streams) we have been seeing several
cases where this error triggers (which should never happen).
Add some extra logging to make debugging these errors easier.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are multiple reasons for this:
1) This fixes a missing check for xhci_alloc_command failing in
xhci_handle_cmd_stop_ep()
2) This adds a warning when we cannot set the new dequeue state because of
xhci_alloc_command failing
3) It puts the allocation of the command after the sanity checks in
queue_set_tr_deq(), avoiding leaking the command if those fail
4) Since queue_set_tr_deq now owns the command it can free it if queue_command
fails
5) It reduces code duplication
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Streams on the EJ168 do not work as they should. I've spend 2 days trying
to get them to work, but without success.
The first problem is that when ever you ring the stream-ring doorbell, the
controller starts executing trbs at the beginning of the first ring segment,
event if it ended somewhere else previously. This can be worked around by
allowing enqueing only one td (not a problem with how streams are typically
used) and then resetting our copies of the enqueueing en dequeueing pointers
on a td completion to match what the controller seems to be doing.
This way things seem to start working with uas and instead of being able
to complete only the very first scsi command, the scsi core can probe the disk.
But then things break later on when td-s get enqueued with more then one
trb. The controller does seem to increase its dequeue pointer while executing
a stream-ring (data transfer events I inserted for debugging do trigger).
However execution seems to stop at the final normal trb of a multi trb td,
even if there is a data transfer event inserted after the final trb.
The first problem alone is a serious deviation from the spec, and esp.
dealing with cancellation would have been very tricky if not outright
impossible, but the second problem simply is a deal breaker altogether,
so this patch simply disables streams.
Note this will cause the usb-storage + uas driver pair to automatically switch
to using usb-storage instead of uas on these devices, essentially reverting
to the 3.14 and earlier behavior when uas was marked CONFIG_BROKEN.
https://bugzilla.redhat.com/show_bug.cgi?id=1121288https://bugzilla.kernel.org/show_bug.cgi?id=80101
Cc: stable@vger.kernel.org # 3.15
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some platforms (such as the Armada 38x ones) can gate the clock of
their USB controller. This patch adds the support for one clock in
xhci-plat, by enabling it during probe and disabling it on remove.
To achieve this, it adds a 'struct clk *' member in xhci_hcd. While
only used for now in xhci-plat, it might be used by other drivers in
the future. Moreover, the xhci_hcd structure already holds other
members such as msix_count and msix_entries, which are MSI-X specific,
and therefore only used by xhci-pci.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use one timer to control command timeout.
start/kick the timer every time a command is completed and a
new command is waiting, or a new command is added to a empty list.
If the timer runs out, then tag the current command as "aborted", and
start the xhci command abortion process.
Previously each function that submitted a command had its own timer.
If that command timed out, a new command structure for the
command was created and it was put on a cancel_cmd_list list,
then a pci write to abort the command ring was issued.
when the ring was aborted, it checked if the current command
was the one to be canceled, later when the ring was stopped the
driver got ownership of the TRBs in the command ring,
compared then to the TRBs in the cancel_cmd_list,
and turned them into No-ops.
Now, instead, at timeout we tag the status of the command in the
command queue to be aborted, and start the ring abortion.
Ring abortion stops the command ring and gives control of the
commands to us.
All the aborted commands are now turned into No-ops.
If the ring is already stopped when the command times outs its not possible
to start the ring abortion, in this case the command is turnd to No-op
right away.
All these changes allows us to remove the entire cancel_cmd_list code.
The functions waiting for a command to finish no longer have their own timeouts.
They will wait either until the command completes normally,
or until the whole command abortion is done.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
