qpnp_pin_debugfs_create() is going through all the child nodes
to create debugfs entries whereas the allocation for q_spec is
made only for available child nodes. This leads to a null pointer
access when CONFIG_GPIO_QPNP_PIN_DEBUG is selected in defconfig.
Fix it by using number of gpios available under each gpio chip
which was populated from the available child count already.
Change-Id: I17cbeeba158d34180763087103da4b03e01f7c90
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Add 710MHz to A540 GPU power level on msmcobaltv2 as per
the hardware recommendation.
CRs-Fixed: 1085733
Change-Id: Iceff8329caf939ad3b34d6a750f056026853c76a
Signed-off-by: Oleg Perelet <operelet@codeaurora.org>
Add control via ADM set PP Params to control volume of ICC
through a mixer command "Internal ICC Volume".
CRs-fixed: 1025376
Change-Id: I2b7099fe6d3a510859af42f1ac37a6db6e1b453c
Signed-off-by: Derek Chen <chenche@codeaurora.org>
Add pinctrl configuration in device tree to support USB type-C
analog audio on msm8998 target.
CRs-Fixed: 1102048
Change-Id: I8d531ecb8bf267ddcc1cd0702c62728dd6317118
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
Current ATH10k driver snapshot is very old, up merge ATH10k project
to enable WCN3990 chipset in msm4.4 tree.
* remotes/origin/tmp-896bb812:
ath10k: cache calibration data when the core is stopped
ath10k: Ignore SWBA event for a vif if its marked for no beacon
ath10k: fix error return code in ahb
ath10k: support up to 64 vdevs
ath10k: document cycle count related counters
ath10k: fix typo in logging message
ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap mode
ath10k: do not check if reset is NULL
ath10k: use devm_reset_control_get() instead of reset_control_get()
ath10k: use devm_clk_get() instead of clk_get()
ath10k: spelling and miscellaneous neatening
ath10k: remove 4-addr padding related hw_param configuration
ath10k: properly remove padding from the start of rx payload
ath10k: add provision for Rx descriptor abstraction
ath10k: move ath10k_hw_params definition to hw.h
ath10k: improve logging message
ath10k: enable peer stats by default
ath10k: remove unused variable ar_pci
ath10k: fix memory leak on caldata on error exit path
ath10k: fix reporting channel survey data
ath10k: remove unnecessary error code assignment
ath10k: fix throughput regression in multi client mode
ath10k: implement NAPI support
ath10k: fix spelling mistake "montior" -> "monitor"
ath10k: Fix broken NULL func data frame status for 10.4
ath10k: replace config_enabled() with IS_REACHABLE()
ath10k: Added support for extended dbglog module id for 10.4
ath10k: use complete() instead complete_all()
ath10k: fix sending frame in management path in push txq logic
ath10k: improve wake_tx_queue ops performance
ath10k: suppress warnings when getting wmi WDS peer event id
ath10k: fix group privacy action frame decryption for qca4019
ath10k: hide kernel addresses from logs using %pK format specifier
ath10k: Add WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT wmi service
ath10k: fix spurious tx/rx during boot
ath10k: add wmi command barrier utility
ath10k: implement wmi echo event
ath10k: implement wmi echo command
ath10k: add testmode support for 10.4 firmware
ath10k: handle testmode events for 10.2 and 10.4 based firmware
ath10k: move firmware_swap_code_seg_info to ath10k_fw_file
ath10k: Remove driver log suggesting QCA9887 support is experimental
ath10k: fix get rx_status from htt context
tree-wide: replace config_enabled() with IS_ENABLED()
ath10k: disable wake_tx_queue for older devices
ath10k: fix possible wrong rx_busy time reporting in QCA4019
ath10k: replace warning with an error message if HTT op version is unset
ath10k: enable support for QCA9888
ath10k: remove unused member in ath10k_hw_regs
ath10k: Clean up peer when sta goes away.
ath10k: Add WARN_ON if we over-write peer-map pointer.
ath10k: remove extra space on ath10k_update_channel_list
ath10k: simplify pktlog htt event processing
ath10k: remove unused <linux/semaphore.h>
ath10k: ensure peer_map references are cleaned up
ath10k: ensure txrx-compl-task is stopped when cleaning htt-tx
ath10k: remove debugfs support for Per STA total rx duration
ath10k: add support for ath10k_sta_statistics support
ath10k: fix 10.4 extended peer stats update
mac80211: Add support for beacon report radio measurement
ath10k: fix some typo in spectral code commments
ath10k: disable TX_STBC for tx chainmask of 1
ath10k: enable beacon loss detection support for 10.4
ath10k: fix potential null dereference bugs
ath10k: remove unneccessary WARN_ON_ONCE in rx during ACS
ath10k: fix crash during card removal
ath10k: fix deadlock while processing rx_in_ord_ind
ath10k: fix cycle counter wraparound handling for QCA4019
ath10k: define an enum to enable cycle counter wraparound logic
ath10k: fix CCK h/w rates for QCA99X0 and newer chipsets
ath10k: remove duplicate and unused rx rate flags
ath10k: fix some of the macro definitions of HTT_RX_IND message
ath10k: fix crash related to printing features
ath10k: add board data download from target
ath10k: add QCA9887 chipset support
ath10k: fix deadlock when peer cannot be created
ath10k: enable ipq4019 device probe in ahb module
ath10k: add pdev param support to enable/disable btcoex
ath10k: add new ATH10K_FW_FEATURE_BTCOEX_PARAM
ath10k: update module description
ath10k: remove unused phy_mode_to_band
ath10k: fix operating irq mode for ahb device
ath10k: fix error while writing 'simulate_fw_crash' debugfs
ath10k: fix diag_read to collect data for larger memory
ath10k: fix legacy rate packet debug messages
ath10k: reduce warning messages during rx without proper channel context
ath10k: improve tx scheduling
ath10k: enable support for QCA9984
ath10k: define rx_ppdu_end for QCA9984
ath10k: clean up growing hw checks during safe and full reset
ath10k: move rx_location_info out of struct rx_pkt_end
ath10k: Fix survey reporting with QCA4019
ath10k: suppress warnings when getting wmi peer_rate_code_list event
ath10k: release pre_cal_file while unloading driver
ath10k: update bss channel survey information
ath10k: handle pdev_chan_info wmi event
ath10k: implement wmi_pdev_bss_chan_info_request
ath10k: add pdev bss channel info wmi definitions
ath10k: move spectral related structures under ath10k debugfs
ath10k: remove VHT capabilities from 2.4GHz
ath10k: fix a typo in ath10k_start()
ath10k: add max_tx_power for QCA6174 WLAN.RM.2.0 firmware
ath10k: remove enum ath10k_swap_code_seg_bin_type
ath10k: switch testmode to use ath10k_core_fetch_firmware_api_n()
ath10k: move htt_op_version to struct ath10k_fw_file
ath10k: move wmi_op_version to struct ath10k_fw_file
ath10k: move fw_features to struct ath10k_fw_file
ath10k: move fw_version inside struct ath10k_fw_file
ath10k: refactor firmware images to struct ath10k_fw_components
ath10k: remove deprecated firmware API 1 support
ath10k: add dynamic tx mode switch config support for qca4019
ath10k: add some sanity checks to peer_map_event() functions
ath10k: fix return value for btcoex and peer stats debugfs
ath10k: fix parenthesis alignment
ath10k: prefer ether_addr_copy() over memcpy()
ath10k: prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()
ath10k: prefer kernel type 'u64' over 'u_int64_t'
ath10k: fix checkpatch warnings related to spaces
ath10k: remove MSI range support
ath10k: enable set_tsf vdev command to WMI 10.4
ath10k: update 10.4 WMI vdev parameters
ath10k: add a support of set_tsf on vdev interface
ath10k: Document alloc_frag_desc_for_data_pkt config option.
cfg80211: remove enum ieee80211_band
ath10k: fix unconditional num_mpdus_ready subtraction
ath10k: remove unnecessary warning for probe response drops
ath10k: fix calibration init sequence of qca99x0
mac80211: allow not sending MIC up from driver for HW crypto
ath10k: parse Rx MAC timestamp in mgmt frame for FW 10.4
ath10k: combine txrx and replenish task
ath10k: reuse copy engine 5 (htt rx) descriptors
ath10k: cleanup copy engine receive next completion
ath10k: register ath10k_htt_htc_t2h_msg_handler
ath10k: speedup htt rx descriptor processing for rx_ind
ath10k: cleanup amsdu processing for rx indication
ath10k: remove unused fw_desc processing
ath10k: copy tx fetch indication message
ath10k: speedup htt rx descriptor processing for tx completion
ath10k: enable parsing per station rx duration for 10.4
ath10k: introduce Extended Resource Config support for 10.4
ath10k: enable debugfs provision to enable Peer Stats feature
ath10k: incorporate qca4019 cal data download sequence
ath10k: move cal data len to hw_params
ath10k: pass cal data location as an argument to ath10k_download_cal_{file|dt}
ath10k: fix null deref if device crashes early
ath10k: fix pull-push tx threshold handling
ath10k: fix tx hang
ath10k: advertise force AP scan feature
ath10k: free cached fw bin contents when get board id fails
ath10k: move mgmt descriptor limit handle under mgmt_tx
ath10k: handle channel change htt event
ath10k: set MAC timestamp in management Rx frame
ath10k: deliver mgmt frames from htt to monitor vifs only
ath10k: change htt tx desc/qcache peer limit config
ath10k: fix HTT Tx CE ring size
ath10k: implement push-pull tx
ath10k: keep track of queue depth per txq
ath10k: store txq in skb_cb
ath10k: implement updating shared htt txq state
ath10k: implement wake_tx_queue
ath10k: add new htt message generation/parsing logic
ath10k: add fast peer_map lookup
ath10k: maintain peer_id for each sta and vif
ath10k: refactor tx pending management
ath10k: unify txpath decision
ath10k: refactor tx code
ath10k: fix sanity check on enabling btcoex via debugfs
ath10k: reduce number of peers to support peer stats feature
ath10k: process htt rx indication as batch mode
ath10k: reduce rx_lock contention for htt rx indication
ath10k: fix erroneous return value
ath10k: add hw_rev to trace events to support pktlog
ath10k: fix pktlog in QCA99X0
ath10k: fix pointless update of peer stats list
ath10k: fix updating peer stats rx duration
ath10k: remove impossible code
ath10k: populate qca4019 fw specific wmi init params
ath10k: add qca4019 hw params
ath10k: add abstraction layer for vdev subtype
ath10k: use vif->type and vif->p2p for P2P_GO check
ath10k: update 10.4 WMI service map
ath10k: rename Mesh related service names
ath10k: expose hif ops for ahb
ath10k: add resource init and deinit in ahb
ath10k: include irq related functions in ahb
ath10k: add chip and bus halt logic in ahb
ath10k: add reset ctrl related functions in ahb
ath10k: add clock ctrl related functions in ahb
ath10k: add helper functions in ahb.c for reg rd/wr
ath10k: include qca4019 register map table
ath10k: add basic skeleton to support ahb
ath10k: pull reusable code from pci probe and remove for ahb
ath10k: make ath10k_pci_read32/write32() ops more generic
ath10k: make some of ath10k_pci_* func reusable
ath10k: implement basic support for new tx path firmware
ath10k: clean up cont frag desc init code
ath10k: add new FW_FEATURE_PEER_FLOW_CONTROL
ath10k: add new htt definitions
ath10k: rename some HTT events
ath10k: remove the p2p notice of absence info from 10.2.4 FW beacon info
ath10k: add debugfs support for Per STA total rx duration
ath10k: enable periodic peer stats update
ath10k: provision to support periodic peer stats update
ath10k: rename few function names of firmware stats
ath10k: cleanup setting pdev paramaters
ath10k: fix naming Peer stats rssi_changed field in 10.2.4
ath10k: add support for parsing per STA rx_duration for 10.2.4
ath10k: prevent txrx running for too long
mac80211: pass block ack session timeout to to driver
ath10k: set SM power save disabled to default value
ath10k: reduce indentation by moving powersave check within function
ath10k: wake up device before accessing registers
ath10k: allow Mesh Point to install peer security key
ath10k: do not use coherent memory for allocated device memory chunks
ath10k: remove unnecessary amsdu/ampdu assignment in debugfs
ath10k: implement fw_checksums debugfs file
ath10k: print crc32 checksums for firmware and board files
ath10k: split driver info messages during device initialisation
ath10k: always show bmi chip ids and subdevice ids
ath10k: reorganise hardware and firmware info messages
ath10k: fix otp board id error message
ath10k: apply Mesh subtype when Mesh interface created.
ath10k: introduce new subtypes for proxy STA and Mesh
ath10k: update WMI 10.x service map
ath10k: Fix write permission on few debugfs files
ath10k: stop abusing GFP_DMA
ath10k: Enable AP + STA interface combination support for 10.x
ath10k: fix board data fetch error message
ath10k: Fix build with CONFIG_THERMAL=m
ath10k: store msdu_id instead of txbuf pointers
ath10k: replace vdev_id and tid in skb cb
ath10k: fix tx header parsing
ath10k: pack up flags in skb_cb
ath10k: remove freq from skb_cb
ath10k: remove is_offchan
ath10k: remove txmode from skb_cb
ath10k: rename function to adhere to naming convention
ath10k: merge is_protected with nohwcrypt
ath10k: adjust the RX packet pad offset at QCA99X0 4addr mode
ath10k: fix the wrong RX rate idx report at 11G mode
ath10k: fix peerid configuration in htt tx desc for htt version < 3.4
ath10k: rename the helper which is used for off-channel tx
ath10k: fix peer assoc complete WMI command for 10.4
ath10k: add support for pktlog in QCA99X0
ath10k: debugfs file to enable Bluetooth coexistence feature
ath10k: add new pdev params defines to 10.4
ath10k: add new WMI cmd/event defines for 10.4
ath10k: add new service defines for 10.4
ath10k: add thermal throttling support for 10.4 firmware
ath10k: set peer MFP flag in peer assoc command
ath10k: add abstraction layer for peer flags
ath10k: consolidate if statements in ath10k_wmi_event_mgmt_rx
Change-Id: I22c4c7c5791079b17545ef7457c54bb60fcfca80
Signed-off-by: Govind Singh <govinds@codeaurora.org>
SDM660 has LPI (and not SSC) which uses "rwlc" and "rwlm"
as the regulator resource names. Use the same.
Change-Id: I88038d0b7ae5b73e03154cf0d03c16a2fd69fc5e
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Moved hooks from SELINUX framework to general SECURITY framework.
Change-Id: I37e701b4925c4993f724c32b258c5088f4dcbe4d
Signed-off-by: Andrey Markovytch <andreym@codeaurora.org>
If misc register failed then there is a chance for accessing the
null pointer in gsi_free_inst function and leads to target crash.
Hence add the change to handle the same.
Change-Id: Iaa3f7db1403ca2d87f259dec109912c5437c24f4
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
SDM660 QRD device will use Groot V1.0 device which would reset
when VPH_PWR and VBOB crossover, this causes the MSM to reset and
a device reboot. Set cut-off voltage to 3.7V to avoid this happen
but this will lose some battery capacity as the penalty.
CRs-Fixed: 1107239
Change-Id: Idae459e036089fa1161d8dd81c33dc393deac3aa
Signed-off-by: cyizhao <cyizhao@codeaurora.org>
Add support for required node for audio of sdm660 qrd skus
with tasha codec.
CRs-Fixed: 1106852
Change-Id: If61b6669ce7a22eb02c044ced240da00e1069bdf
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
