Toghether with the hw state readout this should catch cases where we
don't properly updated the pll state (either in sw or hw). At least
for the shared dpll code the equivalent tricke helped a lot in
catching bugs.
Also rename the function prefix, it's not a generic piece of
infrastructure.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bspec for the "DPLL HDMI multiplier" field says:
"Restriction : The DPLL must be enabled and stable before setting these bits.
These bits must be programmed after DPLL_SEL is programmed."
There is apparently no restriction on programming the DPLL_SEL
register wrt the DPLL. So let's just move that up before we enable the
pch dpll.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No need to call the ->pre_pll_enable hook twice if we don't enable the
dpll too early. This should make Jani a bit less grumpy.
v2: Rebase on top of the newly-colored BUG_ONs.
v3: Reinstate the lost write of the DPLL_MD register, spotted by Imre.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move error state generation and stringification to it's
own compilation unit. Sysfs also uses this so it can't be
under CONFIG_DEBUG_FS
This fixes a regression introduced in
commit ef86ddced7
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Thu Jun 6 17:38:54 2013 +0300
drm/i915: add error_state sysfs entry
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66814
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If intel_sdvo_get_value() fails here, val is unitialized and the cross
check will compare the pipe config multiplier with a bogus value.
Instead, only set encoder_pixel_multiplier when the sdvo command has
been successful. The cross check will compare the pipe config value with
0 otherwise.
v2: Do the cross check with the initial value of encoder_pixel_multiplier (0)
if the sdvo command fails (and thus keep the warning) (Daniel Vetter)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Came accross two open coding of for_each_pipe(), might as well use the
macro.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The code to handle it is broken - there's simply no code to clear CS
parser errors on gen5+. And behold, for all the other rings we also
don't enable it!
Leave the handling code itself in place just to be consistent with the
existing mess though. And in case someone feels like fixing it all up.
This has been errornously enabled in
commit 12638c57f3
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Tue May 28 19:22:31 2013 -0700
drm/i915: Enable vebox interrupts
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the simplified locking there's no reason any more to keep the
refcounts seperate.
v2: Readd the lost comment that ring->irq_refcount is protected by
dev_priv->irq_lock.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that the rps interrupt locking isn't clearly separated (at elast
conceptually) from all the other interrupt locking having a different
lock stopped making sense: It protects much more than just the rps
workqueue it started out with. But with the addition of VECS the
separation started to blurr and resulted in some more complex locking
for the ring interrupt refcount.
With this we can (again) unifiy the ringbuffer irq refcounts without
causing a massive confusion, but that's for the next patch.
v2: Explain better why the rps.lock once made sense and why no longer,
requested by Ben.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And kill the comment about it. Queueing work is a barrier type event,
no amount of locking will help in ordering things (as long as we queue
the work after having updated all relevant data structures). Also, the
queue_work works itself as a sufficient memory barrier.
Again on the surface this is just a tiny micro-optimization to reduce
the hold-time of dev_priv->irq_lock. But the better reason is that it
reduces superficial locking and so makes it clearer what we actually
need for correctness.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The if (pm_iir & ~GEN6_PM_RPS_EVENTS) check was redunandant. Otoh
adding a check for rps events allows us to avoid the spinlock grabbing
for VECS interrupts.
v2: Drop misplaced hunk which now moved to the right patch.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since we only have one interrupt handler and interrupt handlers are
non-reentrant.
To drive the point really home give them all an _irq_handler suffix.
This is a tiny micro-optimization but even more important it makes it
clearer what locking we actually need. And in case someone screws this
up: lockdep will catch hardirq vs. other context deadlocks.
v2: Fix up compile fail.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's racy: There's no guarantee that we won't walk this code (due to a
pch fifo underrun interrupt) while someone is changing the pointers
around.
The only reason we do this is to use the righ crtc for the pch fifo
underrun accounting. But we never expose this to userspace, so
essentially no one really cares if we use the "wrong" crtc.
So let's just rip it out.
With this patch fifo underrun code will always use crtc A for tracking
underruns on the (only) pch transcoder on LPT.
v2: Add a big comment explaining what's going on. Requested by Paulo.
v3: Fixup spelling in comment as spotted by Paulo.
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Same treatment as for SERR_INT: If we clear only the bit for the pipe
we're enabling (but unconditionally) then we can always check for
possible underruns after having disabled the interrupt. That way pipe
underruns won't be lost, but at worst only get reported in a delayed
fashion.
v2: The same logic bug as in the SERR handling change also existed
here. The same bugfix of only reporting missed underruns when the
error interrupt was masked applies, too.
v3: Do the same fixes as for the SERR handling that Paulo suggested in
his review:
- s/%i/%c/ fix in the debug output
- move the DE_ERR_INT_IVB read into the respective if block
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Fix up the checkpatch bikeshed Paulo noticed.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The current code won't report any fifo underruns on cpt if just one
pipe has fifo underrun reporting disabled. We can't enable the
interrupts, but we can still check the per-transcoder bits and so
report the underrun delayed if:
- We always clear the transcoder's bit (and none of the other bits)
when enabling.
- We check the transcoder's bit after disabling (to avoid racing with
the interrupt handler).
v2: I've forgotten to actually remove the old SERR_INT clearing.
v3: Use transcoder_name as suggested by Paulo Zanoni. Paulo also
noticed a logic bug: When an underrun interrupt fires we report it
both in the interrupt handler and when checking for underruns when
disabling it in cpt_set_fifo_underrun_reporting. But that second check
is only required if the interrupt is disabled and we're switching of
underrun reporting (e.g. because we're disabling the crtc). Hence
check for that condition.
At first I wanted to rework the code to pass that bit of information
from the uppper functions down to cpt_set_fifo_underrun_reporting. But
that turned out too messy. Hence the quick&dirty check whether the
south error interrupt source is masked off or not.
v4: Streamline the control flow a bit.
v5: s/pipe/pch transcoder/ in the dmesg output, suggested by Paulo.
v6: Review from Paulo:
- Reorder the was_enabled assignment to only read the register when we
need it. Also add a comment that we need to do that before updating
the register.
- s/%i/%c/ fix for the debug output.
- Fix the checkpath complaint in the SERR_INT_TRANS_FIFO_UNDERRUN
#define.
v7: Hopefully put that elusive SERR hunk back into this patch, spotted
by Paulo.
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This way all changes to SDEIMR all go through the same function, with
the exception of the (single-threaded) setup/teardown code.
For paranoia again add an assert_spin_locked.
v2: For even more paranoia also sprinkle a spinlock assert over
cpt_can_enable_serr_int since we need to have that one there, too.
v3: Fix the logic of interrupt enabling, add enable/disable macros for
the simple cases in the fifo code and add a comment. All requested by
Paulo.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use "const char *" instead of "char *" in order to avoid this warning:
drivers/gpu/drm/drm_edid_load.c: In function ‘drm_load_edid_firmware’:
drivers/gpu/drm/drm_edid_load.c:245:25: warning: initialization discards ‘const’ qualifier from pointer target type [enabled by default]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 25ff119 and the follow on for Valleyview commit 2dc8aae.
commit 25ff1195f8
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Apr 4 21:31:03 2013 +0100
drm/i915: Workaround incoherence between fences and LLC across multiple CPUs
commit 2dc8aae06d
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed May 22 17:08:06 2013 +0100
drm/i915: Workaround incoherence with fence updates on Valleyview
Jon Bloomfield came up with a plausible explanation and cheap fix
(drm/i915: Fix incoherence with fence updates on Sandybridge+) for the
race condition, so lets run with it.
This is a candidate for stable as the old workaround incurs a
significant cost (calling wbinvd on all CPUs before performing the
register write) for some workloads as noted by Carsten Emde.
Link: http://lists.freedesktop.org/archives/intel-gfx/2013-June/028819.html
References: https://www.osadl.org/?id=1543#c7602
References: https://bugs.freedesktop.org/show_bug.cgi?id=63825
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This hopefully fixes the root cause behind the workaround added in
commit 25ff1195f8
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Apr 4 21:31:03 2013 +0100
drm/i915: Workaround incoherence between fences and LLC across multiple CPUs
Thanks to further investigation by Jon Bloomfield, he realised that
the 64-bit register might be broken up by the hardware into two 32-bit
writes (a problem we have encountered elsewhere). This non-atomicity
would then cause an issue where a second thread would see an
intermediate register state (new high dword, old low dword), and this
register would randomly be used in preference to its own thread register.
This would cause the second thread to read from and write into a fairly
random tiled location. Breaking the operation into 3 explicit 32-bit
updates (first disable the fence, poke the upper bits, then poke the lower
bits and enable) ensures that, given proper serialisation between the
32-bit register write and the memory transfer, that the fence value is
always consistent.
Armed with this knowledge, we can explain how the previous workaround
work. The key to the corruption is that a second thread sees an
erroneous fence register that conflicts and overrides its own. By
serialising the fence update across all CPUs, we have a small window
where no GTT access is occurring and so hide the potential corruption.
This also leads to the conclusion that the earlier workaround was
incomplete.
v2: Be overly paranoid about the order in which fence updates become
visible to the GPU to make really sure that we turn the fence off before
doing the update, and then only switch the fence on afterwards.
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In kernel modeset driver mode we're in full control of the chip,
always. So there's no need at all to set mm.suspended in
i915_gem_idle. Hence move that out into the leavevt ioctl. Since
i915_gem_idle doesn't suspend gem any more we can also drop the
re-enabling for KMS in the thaw function.
Also clean up the handling of mm.suspend at driver load by coalescing
all the assignments.
Stumbled over while reading through our resume code for unrelated
reasons.
v2: Shovel mm.suspended into the (newly created) ums dungeon as
suggested by Chris Wilson. The plan is that once we've completely
stopped relying on the register save/restore code we could shovel even
that in there.
v3: Improve the locking for the entervt/leavevt ioctls a bit by moving
the dev->struct_mutex locking outside of i915_gem_idle. Also don't
clear dev_priv->ums.mm_suspended for the kms case, we allocate it with
kzalloc. Both suggested by Chris Wilson.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel noticed a problem where is we wrote to an object with ring A in
the middle of a very long running batch, then executed a quick batch on
ring B before a batch that reads from the same object, its obj->ring would
now point to ring B, but its last_write_seqno would be still relative to
ring A. This would allow for the user to read from the object before the
GPU had completed the write, as set_domain would only check that ring B
had passed the last_write_seqno.
To fix this simply (and inelegantly), we bump the last_write_seqno when
switching rings so that the last_write_seqno is always relative to the
current obj->ring.
This fixes igt/tests/gem_write_read_ring_switch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
[danvet: Add note about the newly created igt which exercises this
bug.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch partially reverts commit 36ec8f8774 for
IvyBridge CPUs.
The original commit results in repeated 'Timed out waiting for forcewake old
ack to clear' messages on a Supermicro C7H61 board (BIOS version 2.00 and 2.00b)
with i7-3770K CPU. It ultimately results in a hangup if the system is highly
loaded. Reverting the commit for IvyBridge CPUs fixes the issue.
Issue a warning if the CPU is IvyBridge and mt forcewake is disabled, since
this condition can result in secondary issues.
v2: Only revert patch for Ivybridge CPUs
Issue info message if mt forcewake is disabled on Ivybridge
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60541
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66139
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull drm updates from Dave Airlie:
"Okay this is the big one, I was stalled on the fbdev pull req as I
stupidly let fbdev guys merge a patch I required to fix a warning with
some patches I had, they ended up merging the patch from the wrong
place, but the warning should be fixed. In future I'll just take the
patch myself!
Outside drm:
There are some snd changes for the HDMI audio interactions on haswell,
they've been acked for inclusion via my tree. This relies on the
wound/wait tree from Ingo which is already merged.
Major changes:
AMD finally released the dynamic power management code for all their
GPUs from r600->present day, this is great, off by default for now but
also a huge amount of code, in fact it is most of this pull request.
Since it landed there has been a lot of community testing and Alex has
sent a lot of fixes for any bugs found so far. I suspect radeon might
now be the biggest kernel driver ever :-P p.s. radeon.dpm=1 to enable
dynamic powermanagement for anyone.
New drivers:
Renesas r-car display unit.
Other highlights:
- core: GEM CMA prime support, use new w/w mutexs for TTM
reservations, cursor hotspot, doc updates
- dvo chips: chrontel 7010B support
- i915: Haswell (fbc, ips, vecs, watermarks, audio powerwell),
Valleyview (enabled by default, rc6), lots of pll reworking, 30bpp
support (this time for sure)
- nouveau: async buffer object deletion, context/register init
updates, kernel vp2 engine support, GF117 support, GK110 accel
support (with external nvidia ucode), context cleanups.
- exynos: memory leak fixes, Add S3C64XX SoC series support, device
tree updates, common clock framework support,
- qxl: cursor hotspot support, multi-monitor support, suspend/resume
support
- mgag200: hw cursor support, g200 mode limiting
- shmobile: prime support
- tegra: fixes mostly
I've been banging on this quite a lot due to the size of it, and it
seems to okay on everything I've tested it on."
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (811 commits)
drm/radeon/dpm: implement vblank_too_short callback for si
drm/radeon/dpm: implement vblank_too_short callback for cayman
drm/radeon/dpm: implement vblank_too_short callback for btc
drm/radeon/dpm: implement vblank_too_short callback for evergreen
drm/radeon/dpm: implement vblank_too_short callback for 7xx
drm/radeon/dpm: add checks against vblank time
drm/radeon/dpm: add helper to calculate vblank time
drm/radeon: remove stray line in old pm code
drm/radeon/dpm: fix display_gap programming on rv7xx
drm/nvc0/gr: fix gpc firmware regression
drm/nouveau: fix minor thinko causing bo moves to not be async on kepler
drm/radeon/dpm: implement force performance level for TN
drm/radeon/dpm: implement force performance level for ON/LN
drm/radeon/dpm: implement force performance level for SI
drm/radeon/dpm: implement force performance level for cayman
drm/radeon/dpm: implement force performance levels for 7xx/eg/btc
drm/radeon/dpm: add infrastructure to force performance levels
drm/radeon: fix surface setup on r1xx
drm/radeon: add support for 3d perf states on older asics
drm/radeon: set default clocks for SI when DPM is disabled
...
I just got confirmation that we're using some old values for the PLL
LPF coefficients for DP RBR/HDMI/DAC on VLV. The
VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_9 document lists both values
by mistake, and apparently we had picked the wrong one. Change the
coefficients to the recommended values.
Changing the value doesn't appear to destabilize the VGA output picture
even with my sensitive HP ZR24w display. Also HDMI output to my TV still
works fine.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: Bail out if we hit the WARN_ON to avoid fallout later on. Spotted
by Chris Wilson.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Originally I've thought that this fixes up the reset issues on my
gm45, but that was just a red herring due to b0rked testing.
Still I much prefer writing the right values (all other fields are
reserved) instead of potentially dragging gunk around. Hence also
clear the register to 0 after a reset.
Note that Cspec is a bit confused and doesn't explicitly say that all
the other bits in this register are "reserved, mbz" like usually.
Instead they're marked as "r/o, default value = 0" which semantically
amounts to the same thing.
v2: Stop claiming this fixes anything and return 0 if successful
instead of stack garbage.
v3: Pimp the commit message to explain exactly why I think the docs
allow us to ditch the rmw cycle, spurred by a discussion with Chris.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
DP 1.2 compatible displays may report a 5.4Gbps maximum bandwidth which
the driver will treat as an invalid value and use 1.62Gbps instead. Fix
this by capping to 2.7Gbps for sinks reporting a 5.4Gbps max bw.
Also add a warning for reserved values.
v2:
- allow only bw values explicitly listed in the DP standard (Daniel,
Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's not a good idea to also run the pipe_control cleanup.
This regression has been introduced whith the original cs tlb w/a in
commit b45305fce5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Dec 17 16:21:27 2012 +0100
drm/i915: Implement workaround for broken CS tlb on i830/845
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64610
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
obj->mm_list link to dev_priv->mm.inactive_list/active_list
obj->global_list link to dev_priv->mm.unbound_list/bound_list
This regression has been introduced in
commit 93927ca52a
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jan 10 18:03:00 2013 +0100
drm/i915: Revert shrinker changes from "Track unbound pages"
Cc: stable@vger.kernel.org
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
[danvet: Add regression notice.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that the audio driver is using our power well API, everything
should be working correctly, so let's give it a try.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sanity check that the memory region found through the Graphics Base
of Stolen Memory is reserved and hidden from the rest of the system
through the use of the resource API.
v2: "Graphics Stolen Memory" is such a more bodacious name than the lame
"i915 stolen", and convert to using devres for automagical cleanup of
the resource. (danvet)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Dump proper hexcodes.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A few more DPM fixes based on user testing.
* 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dpm: implement vblank_too_short callback for si
drm/radeon/dpm: implement vblank_too_short callback for cayman
drm/radeon/dpm: implement vblank_too_short callback for btc
drm/radeon/dpm: implement vblank_too_short callback for evergreen
drm/radeon/dpm: implement vblank_too_short callback for 7xx
drm/radeon/dpm: add checks against vblank time
drm/radeon/dpm: add helper to calculate vblank time
drm/radeon: remove stray line in old pm code
drm/radeon/dpm: fix display_gap programming on rv7xx
drm/radeon/dpm: implement force performance level for TN
drm/radeon/dpm: implement force performance level for ON/LN
drm/radeon/dpm: implement force performance level for SI
drm/radeon/dpm: implement force performance level for cayman
drm/radeon/dpm: implement force performance levels for 7xx/eg/btc
drm/radeon/dpm: add infrastructure to force performance levels
drm/radeon: fix surface setup on r1xx
drm/radeon: add support for 3d perf states on older asics
drm/radeon: set default clocks for SI when DPM is disabled
Two minor fixes for regressions.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nvc0/gr: fix gpc firmware regression
drm/nouveau: fix minor thinko causing bo moves to not be async on kepler
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the vblank time is too short to adjust mclk,
assume multiple displays (no mclk adjustments).
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At least for the common cases where we only need special file
operations. The forcewake file is still rather more special.
v2: Fix up the debugfs unregister code.
v3: Actually squash in the right fixup.
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Section 1.5.4, "DPLL A Control Register" from Bspec about bit 23
"FPA0/A1 P2 Clock Divide":
0 = Divide by 2
1 = Divide by 4. This bit must be set in DVO non-gang mode
So copy the current limits (which should be good for i8xx) and create
a new set for dvo encoders.
Reviewed-by: Chris Wilson <chris@chris-wilson.oc.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I've missed that intel_dvo_mode_set changes the dpll configuration.
Hence when I've reworked the sequence to only enable the dpll in the
crtc_enable callback in
commit 66e3d5c099
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sun Jun 16 21:24:16 2013 +0200
drm/i915: move i9xx dpll enabling into crtc enable function
that special DVO bit was lost. Some BSpec reading confirms that it's
only needed for DVO encoders. Section 1.5.4, "DPLL A Control Register"
for bit 30:
"2X Clock Enable. When driving In non-gang DVO modes such as a
connected flat panel or TV, a 2X" version of the clock is needed. When
not using the 2X output it should be disabled. This bit cannot be set
when driving the integrated LVDS port on devices such as Montara-GM."
Fix this regression up.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66516
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Partially-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Embedding the node in the obj is more natural in the transition to VMAs
which will also have embedded nodes. This change also helps transition
away from put_block to remove node.
Though it's quite an uncommon occurrence, it's somewhat convenient to not
fail at bind time because we cannot allocate the node. Though in
practice there are other allocations (like the request structure) which
would probably make this point not terribly useful.
Quoting Daniel:
Note that the only difference between put_block and remove_node is
that the former fills up the preallocation cache. Which we don't need
anyway and hence is just wasted space.
v2: Clean up the stolen preallocation code.
Rebased on the reserve_node patches
renames ggtt_ stuff to gtt_ stuff
WARN_ON if the object is already bound (which doesn't mean it's in the
bound list, tricky)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the getters in place from the previous patch this members serves no
purpose other than saving one spare pointer chase, which will be killed
in the next patch anyway.
Moving to VMAs, this members adds unnecessary confusion since an object
may exist at different offsets in different VMs.
v2: Properly preserve the stolen offset. This code is a bit hacky but it
all goes away when we embed the drm_mm_node and removes the need for the
incorrect patch I submitted previously: "Use gtt_space->start for stolen
reservation"
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Soon we want to gut a lot of our existing assumptions how many address
spaces an object can live in, and in doing so, embed the drm_mm_node in
the object (and later the VMA).
It's possible in the future we'll want to add more getter/setter
methods, but for now this is enough to enable the VMAs.
v2: Reworked commit message (Ben)
Added comments to the main functions (Ben)
sed -i "s/i915_gem_obj_set_color/i915_gem_obj_ggtt_set_color/" drivers/gpu/drm/i915/*.[ch]
sed -i "s/i915_gem_obj_bound/i915_gem_obj_ggtt_bound/" drivers/gpu/drm/i915/*.[ch]
sed -i "s/i915_gem_obj_size/i915_gem_obj_ggtt_size/" drivers/gpu/drm/i915/*.[ch]
sed -i "s/i915_gem_obj_offset/i915_gem_obj_ggtt_offset/" drivers/gpu/drm/i915/*.[ch]
(Daniel)
v3: Rebased on new reserve_node patch
Changed DRM_DEBUG_KMS to actually work (will need fixing later)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
