Remove read permission for debugfs reg dump node for group and users to not allow reading of wcd9xxx registers. CRs-fixed: 2113240 Change-Id: I73a22e140446828e694fdc95fde7ac4e051c9548 Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
1716 lines
43 KiB
C
1716 lines
43 KiB
C
/* Copyright (c) 2011-2017, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/ratelimit.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/wcd9xxx/wcd9xxx-slimslave.h>
|
|
#include <linux/mfd/wcd9xxx/core.h>
|
|
#include <linux/mfd/wcd9xxx/wcd9xxx-irq.h>
|
|
#include <linux/mfd/wcd9xxx/pdata.h>
|
|
#include <linux/mfd/wcd9xxx/wcd9xxx_registers.h>
|
|
#include <linux/mfd/msm-cdc-pinctrl.h>
|
|
#include <linux/mfd/wcd9xxx/wcd9xxx-utils.h>
|
|
#include <linux/mfd/msm-cdc-supply.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regmap.h>
|
|
#include <sound/soc.h>
|
|
#include "wcd9xxx-regmap.h"
|
|
|
|
#define WCD9XXX_REGISTER_START_OFFSET 0x800
|
|
#define WCD9XXX_SLIM_RW_MAX_TRIES 3
|
|
#define SLIMBUS_PRESENT_TIMEOUT 100
|
|
|
|
#define MAX_WCD9XXX_DEVICE 4
|
|
#define WCD9XXX_I2C_GSBI_SLAVE_ID "3-000d"
|
|
#define WCD9XXX_I2C_TOP_SLAVE_ADDR 0x0d
|
|
#define WCD9XXX_ANALOG_I2C_SLAVE_ADDR 0x77
|
|
#define WCD9XXX_DIGITAL1_I2C_SLAVE_ADDR 0x66
|
|
#define WCD9XXX_DIGITAL2_I2C_SLAVE_ADDR 0x55
|
|
#define WCD9XXX_I2C_TOP_LEVEL 0
|
|
#define WCD9XXX_I2C_ANALOG 1
|
|
#define WCD9XXX_I2C_DIGITAL_1 2
|
|
#define WCD9XXX_I2C_DIGITAL_2 3
|
|
|
|
/*
|
|
* Number of return values needs to be checked for each
|
|
* registration of Slimbus of I2C bus for each codec
|
|
*/
|
|
#define NUM_WCD9XXX_REG_RET 4
|
|
|
|
#define SLIM_USR_MC_REPEAT_CHANGE_VALUE 0x0
|
|
#define SLIM_REPEAT_WRITE_MAX_SLICE 16
|
|
#define REG_BYTES 2
|
|
#define VAL_BYTES 1
|
|
#define WCD9XXX_PAGE_NUM(reg) (((reg) >> 8) & 0xff)
|
|
#define WCD9XXX_PAGE_SIZE 256
|
|
|
|
struct wcd9xxx_i2c {
|
|
struct i2c_client *client;
|
|
struct i2c_msg xfer_msg[2];
|
|
struct mutex xfer_lock;
|
|
int mod_id;
|
|
};
|
|
|
|
static struct regmap_config wcd9xxx_base_regmap_config = {
|
|
.reg_bits = 16,
|
|
.val_bits = 8,
|
|
.can_multi_write = true,
|
|
};
|
|
|
|
static struct regmap_config wcd9xxx_i2c_base_regmap_config = {
|
|
.reg_bits = 16,
|
|
.val_bits = 8,
|
|
.can_multi_write = false,
|
|
.use_single_rw = true,
|
|
};
|
|
|
|
static u8 wcd9xxx_pgd_la;
|
|
static u8 wcd9xxx_inf_la;
|
|
|
|
static const int wcd9xxx_cdc_types[] = {
|
|
[WCD9XXX] = WCD9XXX,
|
|
[WCD9330] = WCD9330,
|
|
[WCD9335] = WCD9335,
|
|
[WCD934X] = WCD934X,
|
|
};
|
|
|
|
static const struct of_device_id wcd9xxx_of_match[] = {
|
|
{ .compatible = "qcom,tasha-i2c-pgd",
|
|
.data = (void *)&wcd9xxx_cdc_types[WCD9335]},
|
|
{ .compatible = "qcom,wcd9xxx-i2c",
|
|
.data = (void *)&wcd9xxx_cdc_types[WCD9330]},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, wcd9xxx_of_match);
|
|
|
|
static int wcd9xxx_slim_device_up(struct slim_device *sldev);
|
|
static int wcd9xxx_slim_device_down(struct slim_device *sldev);
|
|
|
|
struct wcd9xxx_i2c wcd9xxx_modules[MAX_WCD9XXX_DEVICE];
|
|
|
|
static int wcd9xxx_slim_multi_reg_write(struct wcd9xxx *wcd9xxx,
|
|
const void *data, size_t count)
|
|
{
|
|
unsigned int reg;
|
|
struct device *dev;
|
|
u8 val[WCD9XXX_PAGE_SIZE];
|
|
int ret = 0;
|
|
int i = 0;
|
|
int n = 0;
|
|
unsigned int page_num;
|
|
size_t num_regs = (count / (REG_BYTES + VAL_BYTES));
|
|
struct wcd9xxx_reg_val *bulk_reg;
|
|
u8 *buf;
|
|
|
|
dev = wcd9xxx->dev;
|
|
if (!data) {
|
|
dev_err(dev, "%s: data is NULL\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
if (num_regs == 0)
|
|
return -EINVAL;
|
|
|
|
bulk_reg = kzalloc(num_regs * (sizeof(struct wcd9xxx_reg_val)),
|
|
GFP_KERNEL);
|
|
if (!bulk_reg)
|
|
return -ENOMEM;
|
|
|
|
buf = (u8 *)data;
|
|
reg = *(u16 *)buf;
|
|
page_num = WCD9XXX_PAGE_NUM(reg);
|
|
for (i = 0, n = 0; n < num_regs; i++, n++) {
|
|
reg = *(u16 *)buf;
|
|
if (page_num != WCD9XXX_PAGE_NUM(reg)) {
|
|
ret = wcd9xxx_slim_bulk_write(wcd9xxx, bulk_reg,
|
|
i, false);
|
|
page_num = WCD9XXX_PAGE_NUM(reg);
|
|
i = 0;
|
|
}
|
|
buf += REG_BYTES;
|
|
val[i] = *buf;
|
|
buf += VAL_BYTES;
|
|
bulk_reg[i].reg = reg;
|
|
bulk_reg[i].buf = &val[i];
|
|
bulk_reg[i].bytes = 1;
|
|
}
|
|
ret = wcd9xxx_slim_bulk_write(wcd9xxx, bulk_reg,
|
|
i, false);
|
|
if (ret)
|
|
dev_err(dev, "%s: error writing bulk regs\n",
|
|
__func__);
|
|
|
|
kfree(bulk_reg);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* wcd9xxx_interface_reg_read: Read slim interface registers
|
|
*
|
|
* @wcd9xxx: Pointer to wcd9xxx structure
|
|
* @reg: register adderss
|
|
*
|
|
* Returns register value in success and negative error code in case of failure
|
|
*/
|
|
int wcd9xxx_interface_reg_read(struct wcd9xxx *wcd9xxx, unsigned short reg)
|
|
{
|
|
u8 val;
|
|
int ret;
|
|
|
|
mutex_lock(&wcd9xxx->io_lock);
|
|
ret = wcd9xxx->read_dev(wcd9xxx, reg, 1, (void *)&val,
|
|
true);
|
|
if (ret < 0)
|
|
dev_err(wcd9xxx->dev, "%s: Codec read 0x%x failed\n",
|
|
__func__, reg);
|
|
else
|
|
dev_dbg(wcd9xxx->dev, "%s: Read 0x%02x from 0x%x\n",
|
|
__func__, val, reg);
|
|
|
|
mutex_unlock(&wcd9xxx->io_lock);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
else
|
|
return val;
|
|
}
|
|
EXPORT_SYMBOL(wcd9xxx_interface_reg_read);
|
|
|
|
/*
|
|
* wcd9xxx_interface_reg_write: Write slim interface registers
|
|
*
|
|
* @wcd9xxx: Pointer to wcd9xxx structure
|
|
* @reg: register adderss
|
|
* @val: value of the register to be written
|
|
*
|
|
* Returns 0 for success and negative error code in case of failure
|
|
*/
|
|
int wcd9xxx_interface_reg_write(struct wcd9xxx *wcd9xxx, unsigned short reg,
|
|
u8 val)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&wcd9xxx->io_lock);
|
|
ret = wcd9xxx->write_dev(wcd9xxx, reg, 1, (void *)&val, true);
|
|
dev_dbg(wcd9xxx->dev, "%s: Write %02x to 0x%x ret(%d)\n",
|
|
__func__, val, reg, ret);
|
|
mutex_unlock(&wcd9xxx->io_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(wcd9xxx_interface_reg_write);
|
|
|
|
static int wcd9xxx_slim_read_device(struct wcd9xxx *wcd9xxx, unsigned short reg,
|
|
int bytes, void *dest, bool interface)
|
|
{
|
|
int ret;
|
|
struct slim_ele_access msg;
|
|
int slim_read_tries = WCD9XXX_SLIM_RW_MAX_TRIES;
|
|
|
|
msg.start_offset = WCD9XXX_REGISTER_START_OFFSET + reg;
|
|
msg.num_bytes = bytes;
|
|
msg.comp = NULL;
|
|
|
|
if (!wcd9xxx->dev_up) {
|
|
dev_dbg_ratelimited(
|
|
wcd9xxx->dev, "%s: No read allowed. dev_up = %d\n",
|
|
__func__, wcd9xxx->dev_up);
|
|
return 0;
|
|
}
|
|
|
|
while (1) {
|
|
mutex_lock(&wcd9xxx->xfer_lock);
|
|
ret = slim_request_val_element(interface ?
|
|
wcd9xxx->slim_slave : wcd9xxx->slim,
|
|
&msg, dest, bytes);
|
|
mutex_unlock(&wcd9xxx->xfer_lock);
|
|
if (likely(ret == 0) || (--slim_read_tries == 0))
|
|
break;
|
|
usleep_range(5000, 5100);
|
|
}
|
|
|
|
if (ret)
|
|
dev_err(wcd9xxx->dev, "%s: Error, Codec read failed (%d)\n",
|
|
__func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Interface specifies whether the write is to the interface or general
|
|
* registers.
|
|
*/
|
|
static int wcd9xxx_slim_write_device(struct wcd9xxx *wcd9xxx,
|
|
unsigned short reg, int bytes, void *src, bool interface)
|
|
{
|
|
int ret;
|
|
struct slim_ele_access msg;
|
|
int slim_write_tries = WCD9XXX_SLIM_RW_MAX_TRIES;
|
|
|
|
msg.start_offset = WCD9XXX_REGISTER_START_OFFSET + reg;
|
|
msg.num_bytes = bytes;
|
|
msg.comp = NULL;
|
|
|
|
if (!wcd9xxx->dev_up) {
|
|
dev_dbg_ratelimited(
|
|
wcd9xxx->dev, "%s: No write allowed. dev_up = %d\n",
|
|
__func__, wcd9xxx->dev_up);
|
|
return 0;
|
|
}
|
|
|
|
while (1) {
|
|
mutex_lock(&wcd9xxx->xfer_lock);
|
|
ret = slim_change_val_element(interface ?
|
|
wcd9xxx->slim_slave : wcd9xxx->slim,
|
|
&msg, src, bytes);
|
|
mutex_unlock(&wcd9xxx->xfer_lock);
|
|
if (likely(ret == 0) || (--slim_write_tries == 0))
|
|
break;
|
|
usleep_range(5000, 5100);
|
|
}
|
|
|
|
if (ret)
|
|
pr_err("%s: Error, Codec write failed (%d)\n", __func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wcd9xxx_slim_get_allowed_slice(struct wcd9xxx *wcd9xxx,
|
|
int bytes)
|
|
{
|
|
int allowed_sz = bytes;
|
|
|
|
if (likely(bytes == SLIM_REPEAT_WRITE_MAX_SLICE))
|
|
allowed_sz = 16;
|
|
else if (bytes >= 12)
|
|
allowed_sz = 12;
|
|
else if (bytes >= 8)
|
|
allowed_sz = 8;
|
|
else if (bytes >= 6)
|
|
allowed_sz = 6;
|
|
else if (bytes >= 4)
|
|
allowed_sz = 4;
|
|
else
|
|
allowed_sz = bytes;
|
|
|
|
return allowed_sz;
|
|
}
|
|
|
|
/*
|
|
* wcd9xxx_slim_write_repeat: Write the same register with multiple values
|
|
* @wcd9xxx: handle to wcd core
|
|
* @reg: register to be written
|
|
* @bytes: number of bytes to be written to reg
|
|
* @src: buffer with data content to be written to reg
|
|
* This API will write reg with bytes from src in a single slimbus
|
|
* transaction. All values from 1 to 16 are supported by this API.
|
|
*/
|
|
int wcd9xxx_slim_write_repeat(struct wcd9xxx *wcd9xxx, unsigned short reg,
|
|
int bytes, void *src)
|
|
{
|
|
int ret = 0, bytes_to_write = bytes, bytes_allowed;
|
|
struct slim_ele_access slim_msg;
|
|
|
|
mutex_lock(&wcd9xxx->io_lock);
|
|
if (wcd9xxx->type == WCD9335 || wcd9xxx->type == WCD934X) {
|
|
ret = wcd9xxx_page_write(wcd9xxx, ®);
|
|
if (ret)
|
|
goto done;
|
|
}
|
|
|
|
slim_msg.start_offset = WCD9XXX_REGISTER_START_OFFSET + reg;
|
|
slim_msg.comp = NULL;
|
|
|
|
if (unlikely(bytes > SLIM_REPEAT_WRITE_MAX_SLICE)) {
|
|
dev_err(wcd9xxx->dev, "%s: size %d not supported\n",
|
|
__func__, bytes);
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
if (!wcd9xxx->dev_up) {
|
|
dev_dbg_ratelimited(
|
|
wcd9xxx->dev, "%s: No write allowed. dev_up = %d\n",
|
|
__func__, wcd9xxx->dev_up);
|
|
ret = 0;
|
|
goto done;
|
|
}
|
|
|
|
while (bytes_to_write > 0) {
|
|
bytes_allowed = wcd9xxx_slim_get_allowed_slice(wcd9xxx,
|
|
bytes_to_write);
|
|
|
|
slim_msg.num_bytes = bytes_allowed;
|
|
mutex_lock(&wcd9xxx->xfer_lock);
|
|
ret = slim_user_msg(wcd9xxx->slim, wcd9xxx->slim->laddr,
|
|
SLIM_MSG_MT_DEST_REFERRED_USER,
|
|
SLIM_USR_MC_REPEAT_CHANGE_VALUE,
|
|
&slim_msg, src, bytes_allowed);
|
|
mutex_unlock(&wcd9xxx->xfer_lock);
|
|
|
|
if (ret) {
|
|
dev_err(wcd9xxx->dev, "%s: failed, ret = %d\n",
|
|
__func__, ret);
|
|
break;
|
|
}
|
|
|
|
bytes_to_write = bytes_to_write - bytes_allowed;
|
|
src = ((u8 *)src) + bytes_allowed;
|
|
}
|
|
|
|
done:
|
|
mutex_unlock(&wcd9xxx->io_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(wcd9xxx_slim_write_repeat);
|
|
|
|
/*
|
|
* wcd9xxx_slim_reserve_bw: API to reserve the slimbus bandwidth
|
|
* @wcd9xxx: Handle to the wcd9xxx core
|
|
* @bw_ops: value of the bandwidth that is requested
|
|
* @commit: Flag to indicate if bandwidth change is to be committed
|
|
* right away
|
|
*/
|
|
int wcd9xxx_slim_reserve_bw(struct wcd9xxx *wcd9xxx,
|
|
u32 bw_ops, bool commit)
|
|
{
|
|
if (!wcd9xxx || !wcd9xxx->slim) {
|
|
pr_err("%s: Invalid handle to %s\n",
|
|
__func__,
|
|
(!wcd9xxx) ? "wcd9xxx" : "slim_device");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return slim_reservemsg_bw(wcd9xxx->slim, bw_ops, commit);
|
|
}
|
|
EXPORT_SYMBOL(wcd9xxx_slim_reserve_bw);
|
|
|
|
/*
|
|
* wcd9xxx_slim_bulk_write: API to write multiple registers with one descriptor
|
|
* @wcd9xxx: Handle to the wcd9xxx core
|
|
* @wcd9xxx_reg_val: structure holding register and values to be written
|
|
* @size: Indicates number of messages to be written with one descriptor
|
|
* @is_interface: Indicates whether the register is for slim interface or for
|
|
* general registers.
|
|
* @return: returns 0 if success or error information to the caller in case
|
|
* of failure.
|
|
*/
|
|
int wcd9xxx_slim_bulk_write(struct wcd9xxx *wcd9xxx,
|
|
struct wcd9xxx_reg_val *bulk_reg,
|
|
unsigned int size, bool is_interface)
|
|
{
|
|
int ret, i;
|
|
struct slim_val_inf *msgs;
|
|
unsigned short reg;
|
|
|
|
if (!bulk_reg || !size || !wcd9xxx) {
|
|
pr_err("%s: Invalid parameters\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!wcd9xxx->dev_up) {
|
|
dev_dbg_ratelimited(
|
|
wcd9xxx->dev, "%s: No write allowed. dev_up = %d\n",
|
|
__func__, wcd9xxx->dev_up);
|
|
return 0;
|
|
}
|
|
|
|
msgs = kzalloc(size * (sizeof(struct slim_val_inf)), GFP_KERNEL);
|
|
if (!msgs) {
|
|
ret = -ENOMEM;
|
|
goto mem_fail;
|
|
}
|
|
|
|
mutex_lock(&wcd9xxx->io_lock);
|
|
reg = bulk_reg->reg;
|
|
for (i = 0; i < size; i++) {
|
|
msgs[i].start_offset = WCD9XXX_REGISTER_START_OFFSET +
|
|
(bulk_reg->reg & 0xFF);
|
|
msgs[i].num_bytes = bulk_reg->bytes;
|
|
msgs[i].wbuf = bulk_reg->buf;
|
|
bulk_reg++;
|
|
}
|
|
ret = wcd9xxx_page_write(wcd9xxx, ®);
|
|
if (ret) {
|
|
pr_err("%s: Page write error for reg: 0x%x\n",
|
|
__func__, reg);
|
|
goto err;
|
|
}
|
|
|
|
ret = slim_bulk_msg_write(is_interface ?
|
|
wcd9xxx->slim_slave : wcd9xxx->slim,
|
|
SLIM_MSG_MT_CORE,
|
|
SLIM_MSG_MC_CHANGE_VALUE, msgs, size,
|
|
NULL, NULL);
|
|
if (ret)
|
|
pr_err("%s: Error, Codec bulk write failed (%d)\n",
|
|
__func__, ret);
|
|
/* 100 usec sleep is needed as per HW requirement */
|
|
usleep_range(100, 110);
|
|
err:
|
|
mutex_unlock(&wcd9xxx->io_lock);
|
|
kfree(msgs);
|
|
mem_fail:
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(wcd9xxx_slim_bulk_write);
|
|
|
|
static int wcd9xxx_num_irq_regs(const struct wcd9xxx *wcd9xxx)
|
|
{
|
|
return (wcd9xxx->codec_type->num_irqs / 8) +
|
|
((wcd9xxx->codec_type->num_irqs % 8) ? 1 : 0);
|
|
}
|
|
|
|
static int wcd9xxx_regmap_init_cache(struct wcd9xxx *wcd9xxx)
|
|
{
|
|
struct regmap_config *regmap_config;
|
|
int rc;
|
|
|
|
regmap_config = wcd9xxx_get_regmap_config(wcd9xxx->type);
|
|
if (!regmap_config) {
|
|
dev_err(wcd9xxx->dev, "regmap config is not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
rc = regmap_reinit_cache(wcd9xxx->regmap, regmap_config);
|
|
if (rc != 0) {
|
|
dev_err(wcd9xxx->dev, "%s:Failed to reinit register cache: %d\n",
|
|
__func__, rc);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int wcd9xxx_device_init(struct wcd9xxx *wcd9xxx)
|
|
{
|
|
int ret = 0, i;
|
|
struct wcd9xxx_core_resource *core_res = &wcd9xxx->core_res;
|
|
regmap_patch_fptr regmap_apply_patch = NULL;
|
|
|
|
mutex_init(&wcd9xxx->io_lock);
|
|
mutex_init(&wcd9xxx->xfer_lock);
|
|
mutex_init(&wcd9xxx->reset_lock);
|
|
|
|
ret = wcd9xxx_bringup(wcd9xxx->dev);
|
|
if (ret) {
|
|
ret = -EPROBE_DEFER;
|
|
goto err_bring_up;
|
|
}
|
|
|
|
wcd9xxx->codec_type = devm_kzalloc(wcd9xxx->dev,
|
|
sizeof(struct wcd9xxx_codec_type), GFP_KERNEL);
|
|
if (!wcd9xxx->codec_type) {
|
|
ret = -ENOMEM;
|
|
goto err_bring_up;
|
|
}
|
|
ret = wcd9xxx_get_codec_info(wcd9xxx->dev);
|
|
if (ret) {
|
|
ret = -EPROBE_DEFER;
|
|
goto fail_cdc_fill;
|
|
}
|
|
wcd9xxx->version = wcd9xxx->codec_type->version;
|
|
if (!wcd9xxx->codec_type->dev || !wcd9xxx->codec_type->size)
|
|
goto fail_cdc_fill;
|
|
|
|
core_res->parent = wcd9xxx;
|
|
core_res->dev = wcd9xxx->dev;
|
|
core_res->intr_table = wcd9xxx->codec_type->intr_tbl;
|
|
core_res->intr_table_size = wcd9xxx->codec_type->intr_tbl_size;
|
|
|
|
for (i = 0; i < WCD9XXX_INTR_REG_MAX; i++)
|
|
wcd9xxx->core_res.intr_reg[i] =
|
|
wcd9xxx->codec_type->intr_reg[i];
|
|
|
|
wcd9xxx_core_res_init(&wcd9xxx->core_res,
|
|
wcd9xxx->codec_type->num_irqs,
|
|
wcd9xxx_num_irq_regs(wcd9xxx),
|
|
wcd9xxx->regmap);
|
|
|
|
if (wcd9xxx_core_irq_init(&wcd9xxx->core_res))
|
|
goto err;
|
|
|
|
ret = wcd9xxx_regmap_init_cache(wcd9xxx);
|
|
if (ret)
|
|
goto err_irq;
|
|
|
|
regmap_apply_patch = wcd9xxx_get_regmap_reg_patch(
|
|
wcd9xxx->type);
|
|
if (regmap_apply_patch) {
|
|
ret = regmap_apply_patch(wcd9xxx->regmap,
|
|
wcd9xxx->version);
|
|
if (ret)
|
|
dev_err(wcd9xxx->dev,
|
|
"Failed to register patch: %d\n", ret);
|
|
}
|
|
|
|
ret = mfd_add_devices(wcd9xxx->dev, -1, wcd9xxx->codec_type->dev,
|
|
wcd9xxx->codec_type->size, NULL, 0, NULL);
|
|
if (ret != 0) {
|
|
dev_err(wcd9xxx->dev, "Failed to add children: %d\n", ret);
|
|
goto err_irq;
|
|
}
|
|
|
|
ret = device_init_wakeup(wcd9xxx->dev, true);
|
|
if (ret) {
|
|
dev_err(wcd9xxx->dev, "Device wakeup init failed: %d\n", ret);
|
|
goto err_irq;
|
|
}
|
|
|
|
return ret;
|
|
err_irq:
|
|
wcd9xxx_irq_exit(&wcd9xxx->core_res);
|
|
fail_cdc_fill:
|
|
devm_kfree(wcd9xxx->dev, wcd9xxx->codec_type);
|
|
wcd9xxx->codec_type = NULL;
|
|
err:
|
|
wcd9xxx_bringdown(wcd9xxx->dev);
|
|
wcd9xxx_core_res_deinit(&wcd9xxx->core_res);
|
|
err_bring_up:
|
|
mutex_destroy(&wcd9xxx->io_lock);
|
|
mutex_destroy(&wcd9xxx->xfer_lock);
|
|
mutex_destroy(&wcd9xxx->reset_lock);
|
|
return ret;
|
|
}
|
|
|
|
static void wcd9xxx_device_exit(struct wcd9xxx *wcd9xxx)
|
|
{
|
|
device_init_wakeup(wcd9xxx->dev, false);
|
|
wcd9xxx_irq_exit(&wcd9xxx->core_res);
|
|
wcd9xxx_bringdown(wcd9xxx->dev);
|
|
wcd9xxx_reset_low(wcd9xxx->dev);
|
|
wcd9xxx_core_res_deinit(&wcd9xxx->core_res);
|
|
mutex_destroy(&wcd9xxx->io_lock);
|
|
mutex_destroy(&wcd9xxx->xfer_lock);
|
|
mutex_destroy(&wcd9xxx->reset_lock);
|
|
if (wcd9xxx_get_intf_type() == WCD9XXX_INTERFACE_TYPE_SLIMBUS)
|
|
slim_remove_device(wcd9xxx->slim_slave);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
struct wcd9xxx *debugCodec;
|
|
|
|
static struct dentry *debugfs_wcd9xxx_dent;
|
|
static struct dentry *debugfs_peek;
|
|
static struct dentry *debugfs_poke;
|
|
static struct dentry *debugfs_power_state;
|
|
static struct dentry *debugfs_reg_dump;
|
|
|
|
static unsigned char read_data;
|
|
|
|
static int codec_debug_open(struct inode *inode, struct file *file)
|
|
{
|
|
file->private_data = inode->i_private;
|
|
return 0;
|
|
}
|
|
|
|
static int get_parameters(char *buf, long int *param1, int num_of_par)
|
|
{
|
|
char *token;
|
|
int base, cnt;
|
|
|
|
token = strsep(&buf, " ");
|
|
|
|
for (cnt = 0; cnt < num_of_par; cnt++) {
|
|
if (token != NULL) {
|
|
if ((token[1] == 'x') || (token[1] == 'X'))
|
|
base = 16;
|
|
else
|
|
base = 10;
|
|
|
|
if (kstrtoul(token, base, ¶m1[cnt]) != 0)
|
|
return -EINVAL;
|
|
|
|
token = strsep(&buf, " ");
|
|
} else
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t wcd9xxx_slimslave_reg_show(char __user *ubuf, size_t count,
|
|
loff_t *ppos)
|
|
{
|
|
int i, reg_val, len;
|
|
ssize_t total = 0;
|
|
char tmp_buf[25]; /* each line is 12 bytes but 25 for margin of error */
|
|
|
|
for (i = (int) *ppos / 12; i <= SLIM_MAX_REG_ADDR; i++) {
|
|
reg_val = wcd9xxx_interface_reg_read(debugCodec, i);
|
|
len = snprintf(tmp_buf, sizeof(tmp_buf),
|
|
"0x%.3x: 0x%.2x\n", i, reg_val);
|
|
|
|
if ((total + len) >= count - 1)
|
|
break;
|
|
if (copy_to_user((ubuf + total), tmp_buf, len)) {
|
|
pr_err("%s: fail to copy reg dump\n", __func__);
|
|
total = -EFAULT;
|
|
goto copy_err;
|
|
}
|
|
*ppos += len;
|
|
total += len;
|
|
}
|
|
|
|
copy_err:
|
|
return total;
|
|
}
|
|
|
|
static ssize_t codec_debug_read(struct file *file, char __user *ubuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
char lbuf[8];
|
|
char *access_str = file->private_data;
|
|
ssize_t ret_cnt;
|
|
|
|
if (*ppos < 0 || !count)
|
|
return -EINVAL;
|
|
|
|
if (!strcmp(access_str, "slimslave_peek")) {
|
|
snprintf(lbuf, sizeof(lbuf), "0x%x\n", read_data);
|
|
ret_cnt = simple_read_from_buffer(ubuf, count, ppos, lbuf,
|
|
strnlen(lbuf, 7));
|
|
} else if (!strcmp(access_str, "slimslave_reg_dump")) {
|
|
ret_cnt = wcd9xxx_slimslave_reg_show(ubuf, count, ppos);
|
|
} else {
|
|
pr_err("%s: %s not permitted to read\n", __func__, access_str);
|
|
ret_cnt = -EPERM;
|
|
}
|
|
|
|
return ret_cnt;
|
|
}
|
|
|
|
static void wcd9xxx_set_reset_pin_state(struct wcd9xxx *wcd9xxx,
|
|
struct wcd9xxx_pdata *pdata,
|
|
bool active)
|
|
{
|
|
if (wcd9xxx->wcd_rst_np) {
|
|
if (active)
|
|
msm_cdc_pinctrl_select_active_state(
|
|
wcd9xxx->wcd_rst_np);
|
|
else
|
|
msm_cdc_pinctrl_select_sleep_state(
|
|
wcd9xxx->wcd_rst_np);
|
|
|
|
return;
|
|
} else if (gpio_is_valid(wcd9xxx->reset_gpio)) {
|
|
gpio_direction_output(wcd9xxx->reset_gpio,
|
|
(active == true ? 1 : 0));
|
|
}
|
|
}
|
|
|
|
static int codec_debug_process_cdc_power(char *lbuf)
|
|
{
|
|
long int param;
|
|
int rc;
|
|
struct wcd9xxx_pdata *pdata;
|
|
|
|
if (wcd9xxx_get_intf_type() != WCD9XXX_INTERFACE_TYPE_SLIMBUS) {
|
|
pr_err("%s: CODEC is not in SLIMBUS mode\n", __func__);
|
|
rc = -EPERM;
|
|
goto error_intf;
|
|
}
|
|
|
|
rc = get_parameters(lbuf, ¶m, 1);
|
|
|
|
if (likely(!rc)) {
|
|
pdata = debugCodec->slim->dev.platform_data;
|
|
if (param == 0) {
|
|
wcd9xxx_slim_device_down(debugCodec->slim);
|
|
msm_cdc_disable_static_supplies(debugCodec->dev,
|
|
debugCodec->supplies,
|
|
pdata->regulator,
|
|
pdata->num_supplies);
|
|
wcd9xxx_set_reset_pin_state(debugCodec, pdata, false);
|
|
} else if (param == 1) {
|
|
msm_cdc_enable_static_supplies(debugCodec->dev,
|
|
debugCodec->supplies,
|
|
pdata->regulator,
|
|
pdata->num_supplies);
|
|
usleep_range(1000, 2000);
|
|
wcd9xxx_set_reset_pin_state(debugCodec, pdata, false);
|
|
usleep_range(1000, 2000);
|
|
wcd9xxx_set_reset_pin_state(debugCodec, pdata, true);
|
|
usleep_range(1000, 2000);
|
|
wcd9xxx_slim_device_up(debugCodec->slim);
|
|
} else {
|
|
pr_err("%s: invalid command %ld\n", __func__, param);
|
|
}
|
|
}
|
|
|
|
error_intf:
|
|
return rc;
|
|
}
|
|
|
|
static ssize_t codec_debug_write(struct file *filp,
|
|
const char __user *ubuf, size_t cnt, loff_t *ppos)
|
|
{
|
|
char *access_str = filp->private_data;
|
|
char lbuf[32];
|
|
int rc;
|
|
long int param[5];
|
|
|
|
if (cnt > sizeof(lbuf) - 1)
|
|
return -EINVAL;
|
|
|
|
rc = copy_from_user(lbuf, ubuf, cnt);
|
|
if (rc)
|
|
return -EFAULT;
|
|
|
|
lbuf[cnt] = '\0';
|
|
|
|
if (!strcmp(access_str, "slimslave_poke")) {
|
|
/* write */
|
|
rc = get_parameters(lbuf, param, 2);
|
|
if ((param[0] <= 0x3FF) && (param[1] <= 0xFF) &&
|
|
(rc == 0))
|
|
wcd9xxx_interface_reg_write(debugCodec, param[0],
|
|
param[1]);
|
|
else
|
|
rc = -EINVAL;
|
|
} else if (!strcmp(access_str, "slimslave_peek")) {
|
|
/* read */
|
|
rc = get_parameters(lbuf, param, 1);
|
|
if ((param[0] <= 0x3FF) && (rc == 0))
|
|
read_data = wcd9xxx_interface_reg_read(debugCodec,
|
|
param[0]);
|
|
else
|
|
rc = -EINVAL;
|
|
} else if (!strcmp(access_str, "power_state")) {
|
|
rc = codec_debug_process_cdc_power(lbuf);
|
|
}
|
|
|
|
if (rc == 0)
|
|
rc = cnt;
|
|
else
|
|
pr_err("%s: rc = %d\n", __func__, rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static const struct file_operations codec_debug_ops = {
|
|
.open = codec_debug_open,
|
|
.write = codec_debug_write,
|
|
.read = codec_debug_read
|
|
};
|
|
#endif
|
|
|
|
static struct wcd9xxx_i2c *wcd9xxx_i2c_get_device_info(struct wcd9xxx *wcd9xxx,
|
|
u16 reg)
|
|
{
|
|
u16 mask = 0x0f00;
|
|
int value = 0;
|
|
struct wcd9xxx_i2c *wcd9xxx_i2c = NULL;
|
|
|
|
if (wcd9xxx->type == WCD9335) {
|
|
wcd9xxx_i2c = &wcd9xxx_modules[0];
|
|
} else {
|
|
value = ((reg & mask) >> 8) & 0x000f;
|
|
switch (value) {
|
|
case 0:
|
|
wcd9xxx_i2c = &wcd9xxx_modules[0];
|
|
break;
|
|
case 1:
|
|
wcd9xxx_i2c = &wcd9xxx_modules[1];
|
|
break;
|
|
case 2:
|
|
wcd9xxx_i2c = &wcd9xxx_modules[2];
|
|
break;
|
|
case 3:
|
|
wcd9xxx_i2c = &wcd9xxx_modules[3];
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
return wcd9xxx_i2c;
|
|
}
|
|
|
|
static int wcd9xxx_i2c_write_device(struct wcd9xxx *wcd9xxx, u16 reg, u8 *value,
|
|
u32 bytes)
|
|
{
|
|
|
|
struct i2c_msg *msg;
|
|
int ret = 0;
|
|
u8 reg_addr = 0;
|
|
u8 data[bytes + 1];
|
|
struct wcd9xxx_i2c *wcd9xxx_i2c;
|
|
|
|
wcd9xxx_i2c = wcd9xxx_i2c_get_device_info(wcd9xxx, reg);
|
|
if (wcd9xxx_i2c == NULL || wcd9xxx_i2c->client == NULL) {
|
|
pr_err("failed to get device info\n");
|
|
return -ENODEV;
|
|
}
|
|
reg_addr = (u8)reg;
|
|
msg = &wcd9xxx_i2c->xfer_msg[0];
|
|
msg->addr = wcd9xxx_i2c->client->addr;
|
|
msg->len = bytes + 1;
|
|
msg->flags = 0;
|
|
data[0] = reg;
|
|
data[1] = *value;
|
|
msg->buf = data;
|
|
ret = i2c_transfer(wcd9xxx_i2c->client->adapter,
|
|
wcd9xxx_i2c->xfer_msg, 1);
|
|
/* Try again if the write fails */
|
|
if (ret != 1) {
|
|
ret = i2c_transfer(wcd9xxx_i2c->client->adapter,
|
|
wcd9xxx_i2c->xfer_msg, 1);
|
|
if (ret != 1) {
|
|
pr_err("failed to write the device\n");
|
|
return ret;
|
|
}
|
|
}
|
|
pr_debug("write sucess register = %x val = %x\n", reg, data[1]);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int wcd9xxx_i2c_read_device(struct wcd9xxx *wcd9xxx, unsigned short reg,
|
|
int bytes, unsigned char *dest)
|
|
{
|
|
struct i2c_msg *msg;
|
|
int ret = 0;
|
|
u8 reg_addr = 0;
|
|
struct wcd9xxx_i2c *wcd9xxx_i2c;
|
|
u8 i = 0;
|
|
|
|
wcd9xxx_i2c = wcd9xxx_i2c_get_device_info(wcd9xxx, reg);
|
|
if (wcd9xxx_i2c == NULL || wcd9xxx_i2c->client == NULL) {
|
|
pr_err("failed to get device info\n");
|
|
return -ENODEV;
|
|
}
|
|
for (i = 0; i < bytes; i++) {
|
|
reg_addr = (u8)reg++;
|
|
msg = &wcd9xxx_i2c->xfer_msg[0];
|
|
msg->addr = wcd9xxx_i2c->client->addr;
|
|
msg->len = 1;
|
|
msg->flags = 0;
|
|
msg->buf = ®_addr;
|
|
|
|
msg = &wcd9xxx_i2c->xfer_msg[1];
|
|
msg->addr = wcd9xxx_i2c->client->addr;
|
|
msg->len = 1;
|
|
msg->flags = I2C_M_RD;
|
|
msg->buf = dest++;
|
|
ret = i2c_transfer(wcd9xxx_i2c->client->adapter,
|
|
wcd9xxx_i2c->xfer_msg, 2);
|
|
|
|
/* Try again if read fails first time */
|
|
if (ret != 2) {
|
|
ret = i2c_transfer(wcd9xxx_i2c->client->adapter,
|
|
wcd9xxx_i2c->xfer_msg, 2);
|
|
if (ret != 2) {
|
|
pr_err("failed to read wcd9xxx register\n");
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int wcd9xxx_i2c_read(struct wcd9xxx *wcd9xxx, unsigned short reg,
|
|
int bytes, void *dest, bool interface_reg)
|
|
{
|
|
return wcd9xxx_i2c_read_device(wcd9xxx, reg, bytes, dest);
|
|
}
|
|
|
|
int wcd9xxx_i2c_write(struct wcd9xxx *wcd9xxx, unsigned short reg,
|
|
int bytes, void *src, bool interface_reg)
|
|
{
|
|
return wcd9xxx_i2c_write_device(wcd9xxx, reg, src, bytes);
|
|
}
|
|
|
|
static int wcd9xxx_i2c_get_client_index(struct i2c_client *client,
|
|
int *wcd9xx_index)
|
|
{
|
|
int ret = 0;
|
|
|
|
switch (client->addr) {
|
|
case WCD9XXX_I2C_TOP_SLAVE_ADDR:
|
|
*wcd9xx_index = WCD9XXX_I2C_TOP_LEVEL;
|
|
break;
|
|
case WCD9XXX_ANALOG_I2C_SLAVE_ADDR:
|
|
*wcd9xx_index = WCD9XXX_I2C_ANALOG;
|
|
break;
|
|
case WCD9XXX_DIGITAL1_I2C_SLAVE_ADDR:
|
|
*wcd9xx_index = WCD9XXX_I2C_DIGITAL_1;
|
|
break;
|
|
case WCD9XXX_DIGITAL2_I2C_SLAVE_ADDR:
|
|
*wcd9xx_index = WCD9XXX_I2C_DIGITAL_2;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int wcd9xxx_i2c_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct wcd9xxx *wcd9xxx = NULL;
|
|
struct wcd9xxx_pdata *pdata = NULL;
|
|
int val = 0;
|
|
int ret = 0;
|
|
int wcd9xx_index = 0;
|
|
struct device *dev;
|
|
int intf_type;
|
|
const struct of_device_id *of_id;
|
|
|
|
intf_type = wcd9xxx_get_intf_type();
|
|
|
|
pr_debug("%s: interface status %d\n", __func__, intf_type);
|
|
if (intf_type == WCD9XXX_INTERFACE_TYPE_SLIMBUS) {
|
|
dev_dbg(&client->dev, "%s:Codec is detected in slimbus mode\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
} else if (intf_type == WCD9XXX_INTERFACE_TYPE_I2C) {
|
|
ret = wcd9xxx_i2c_get_client_index(client, &wcd9xx_index);
|
|
if (ret != 0)
|
|
dev_err(&client->dev, "%s: I2C set codec I2C\n"
|
|
"client failed\n", __func__);
|
|
else {
|
|
dev_err(&client->dev, "%s:probe for other slaves\n"
|
|
"devices of codec I2C slave Addr = %x\n",
|
|
__func__, client->addr);
|
|
wcd9xxx_modules[wcd9xx_index].client = client;
|
|
}
|
|
return ret;
|
|
} else if (intf_type == WCD9XXX_INTERFACE_TYPE_PROBING) {
|
|
dev = &client->dev;
|
|
if (client->dev.of_node) {
|
|
dev_dbg(&client->dev, "%s:Platform data\n"
|
|
"from device tree\n", __func__);
|
|
pdata = wcd9xxx_populate_dt_data(&client->dev);
|
|
if (!pdata) {
|
|
dev_err(&client->dev,
|
|
"%s: Fail to obtain pdata from device tree\n",
|
|
__func__);
|
|
ret = -EINVAL;
|
|
goto fail;
|
|
}
|
|
client->dev.platform_data = pdata;
|
|
} else {
|
|
dev_dbg(&client->dev, "%s:Platform data from\n"
|
|
"board file\n", __func__);
|
|
pdata = client->dev.platform_data;
|
|
}
|
|
wcd9xxx = devm_kzalloc(&client->dev, sizeof(struct wcd9xxx),
|
|
GFP_KERNEL);
|
|
if (!wcd9xxx) {
|
|
ret = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
if (!pdata) {
|
|
dev_dbg(&client->dev, "no platform data?\n");
|
|
ret = -EINVAL;
|
|
goto fail;
|
|
}
|
|
wcd9xxx->type = WCD9XXX;
|
|
if (client->dev.of_node) {
|
|
of_id = of_match_device(wcd9xxx_of_match, &client->dev);
|
|
if (of_id) {
|
|
wcd9xxx->type = *((int *)of_id->data);
|
|
dev_info(&client->dev, "%s: codec type is %d\n",
|
|
__func__, wcd9xxx->type);
|
|
}
|
|
} else {
|
|
dev_info(&client->dev, "%s: dev.of_node is NULL, default to WCD9XXX\n",
|
|
__func__);
|
|
wcd9xxx->type = WCD9XXX;
|
|
}
|
|
wcd9xxx->regmap = wcd9xxx_regmap_init(&client->dev,
|
|
&wcd9xxx_i2c_base_regmap_config);
|
|
if (IS_ERR(wcd9xxx->regmap)) {
|
|
ret = PTR_ERR(wcd9xxx->regmap);
|
|
dev_err(&client->dev, "%s: Failed to allocate register map: %d\n",
|
|
__func__, ret);
|
|
goto err_codec;
|
|
}
|
|
wcd9xxx->reset_gpio = pdata->reset_gpio;
|
|
wcd9xxx->wcd_rst_np = pdata->wcd_rst_np;
|
|
|
|
if (!wcd9xxx->wcd_rst_np) {
|
|
pdata->use_pinctrl = false;
|
|
dev_err(&client->dev, "%s: pinctrl not used for rst_n\n",
|
|
__func__);
|
|
goto err_codec;
|
|
}
|
|
|
|
if (i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_I2C) == 0) {
|
|
dev_dbg(&client->dev, "can't talk I2C?\n");
|
|
ret = -EIO;
|
|
goto fail;
|
|
}
|
|
dev_set_drvdata(&client->dev, wcd9xxx);
|
|
wcd9xxx->dev = &client->dev;
|
|
wcd9xxx->dev_up = true;
|
|
if (client->dev.of_node)
|
|
wcd9xxx->mclk_rate = pdata->mclk_rate;
|
|
|
|
wcd9xxx->num_of_supplies = pdata->num_supplies;
|
|
ret = msm_cdc_init_supplies(wcd9xxx->dev, &wcd9xxx->supplies,
|
|
pdata->regulator,
|
|
pdata->num_supplies);
|
|
if (!wcd9xxx->supplies) {
|
|
dev_err(wcd9xxx->dev, "%s: Cannot init wcd supplies\n",
|
|
__func__);
|
|
goto err_codec;
|
|
}
|
|
ret = msm_cdc_enable_static_supplies(wcd9xxx->dev,
|
|
wcd9xxx->supplies,
|
|
pdata->regulator,
|
|
pdata->num_supplies);
|
|
if (ret) {
|
|
dev_err(wcd9xxx->dev, "%s: wcd static supply enable failed!\n",
|
|
__func__);
|
|
goto err_codec;
|
|
}
|
|
/* For WCD9335, it takes about 600us for the Vout_A and
|
|
* Vout_D to be ready after BUCK_SIDO is powered up\
|
|
* SYS_RST_N shouldn't be pulled high during this time
|
|
*/
|
|
if (wcd9xxx->type == WCD9335)
|
|
usleep_range(600, 650);
|
|
else
|
|
usleep_range(5, 10);
|
|
|
|
ret = wcd9xxx_reset(wcd9xxx->dev);
|
|
if (ret) {
|
|
pr_err("%s: Resetting Codec failed\n", __func__);
|
|
goto err_supplies;
|
|
}
|
|
|
|
ret = wcd9xxx_i2c_get_client_index(client, &wcd9xx_index);
|
|
if (ret != 0) {
|
|
pr_err("%s:Set codec I2C client failed\n", __func__);
|
|
goto err_supplies;
|
|
}
|
|
|
|
wcd9xxx_modules[wcd9xx_index].client = client;
|
|
wcd9xxx->read_dev = wcd9xxx_i2c_read;
|
|
wcd9xxx->write_dev = wcd9xxx_i2c_write;
|
|
if (!wcd9xxx->dev->of_node)
|
|
wcd9xxx_assign_irq(&wcd9xxx->core_res,
|
|
pdata->irq, pdata->irq_base);
|
|
|
|
ret = wcd9xxx_device_init(wcd9xxx);
|
|
if (ret) {
|
|
pr_err("%s: error, initializing device failed (%d)\n",
|
|
__func__, ret);
|
|
goto err_device_init;
|
|
}
|
|
|
|
ret = wcd9xxx_i2c_read(wcd9xxx, WCD9XXX_A_CHIP_STATUS, 1,
|
|
&val, 0);
|
|
if (ret < 0)
|
|
pr_err("%s: failed to read the wcd9xxx status (%d)\n",
|
|
__func__, ret);
|
|
if (val != wcd9xxx->codec_type->i2c_chip_status)
|
|
pr_err("%s: unknown chip status 0x%x\n", __func__, val);
|
|
|
|
wcd9xxx_set_intf_type(WCD9XXX_INTERFACE_TYPE_I2C);
|
|
|
|
return ret;
|
|
} else
|
|
pr_err("%s: I2C probe in wrong state\n", __func__);
|
|
|
|
|
|
err_device_init:
|
|
wcd9xxx_reset_low(wcd9xxx->dev);
|
|
err_supplies:
|
|
msm_cdc_release_supplies(wcd9xxx->dev, wcd9xxx->supplies,
|
|
pdata->regulator,
|
|
pdata->num_supplies);
|
|
pdata->regulator = NULL;
|
|
pdata->num_supplies = 0;
|
|
err_codec:
|
|
devm_kfree(&client->dev, wcd9xxx);
|
|
dev_set_drvdata(&client->dev, NULL);
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
static int wcd9xxx_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct wcd9xxx *wcd9xxx;
|
|
struct wcd9xxx_pdata *pdata = client->dev.platform_data;
|
|
|
|
wcd9xxx = dev_get_drvdata(&client->dev);
|
|
msm_cdc_release_supplies(wcd9xxx->dev, wcd9xxx->supplies,
|
|
pdata->regulator,
|
|
pdata->num_supplies);
|
|
wcd9xxx_device_exit(wcd9xxx);
|
|
dev_set_drvdata(&client->dev, NULL);
|
|
return 0;
|
|
}
|
|
|
|
static int wcd9xxx_dt_parse_slim_interface_dev_info(struct device *dev,
|
|
struct slim_device *slim_ifd)
|
|
{
|
|
int ret = 0;
|
|
struct property *prop;
|
|
|
|
ret = of_property_read_string(dev->of_node, "qcom,cdc-slim-ifd",
|
|
&slim_ifd->name);
|
|
if (ret) {
|
|
dev_err(dev, "Looking up %s property in node %s failed",
|
|
"qcom,cdc-slim-ifd-dev", dev->of_node->full_name);
|
|
return -ENODEV;
|
|
}
|
|
prop = of_find_property(dev->of_node,
|
|
"qcom,cdc-slim-ifd-elemental-addr", NULL);
|
|
if (!prop) {
|
|
dev_err(dev, "Looking up %s property in node %s failed",
|
|
"qcom,cdc-slim-ifd-elemental-addr",
|
|
dev->of_node->full_name);
|
|
return -ENODEV;
|
|
} else if (prop->length != 6) {
|
|
dev_err(dev, "invalid codec slim ifd addr. addr length = %d\n",
|
|
prop->length);
|
|
return -ENODEV;
|
|
}
|
|
memcpy(slim_ifd->e_addr, prop->value, 6);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wcd9xxx_slim_get_laddr(struct slim_device *sb,
|
|
const u8 *e_addr, u8 e_len, u8 *laddr)
|
|
{
|
|
int ret;
|
|
const unsigned long timeout = jiffies +
|
|
msecs_to_jiffies(SLIMBUS_PRESENT_TIMEOUT);
|
|
|
|
do {
|
|
ret = slim_get_logical_addr(sb, e_addr, e_len, laddr);
|
|
if (!ret)
|
|
break;
|
|
/* Give SLIMBUS time to report present and be ready. */
|
|
usleep_range(1000, 1100);
|
|
pr_debug_ratelimited("%s: retyring get logical addr\n",
|
|
__func__);
|
|
} while time_before(jiffies, timeout);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wcd9xxx_slim_probe(struct slim_device *slim)
|
|
{
|
|
struct wcd9xxx *wcd9xxx;
|
|
struct wcd9xxx_pdata *pdata;
|
|
const struct slim_device_id *device_id;
|
|
int ret = 0;
|
|
int intf_type;
|
|
|
|
intf_type = wcd9xxx_get_intf_type();
|
|
|
|
wcd9xxx = devm_kzalloc(&slim->dev, sizeof(struct wcd9xxx),
|
|
GFP_KERNEL);
|
|
if (!wcd9xxx) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
if (!slim) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
if (intf_type == WCD9XXX_INTERFACE_TYPE_I2C) {
|
|
dev_dbg(&slim->dev, "%s:Codec is detected in I2C mode\n",
|
|
__func__);
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
if (slim->dev.of_node) {
|
|
dev_info(&slim->dev, "Platform data from device tree\n");
|
|
pdata = wcd9xxx_populate_dt_data(&slim->dev);
|
|
if (!pdata) {
|
|
dev_err(&slim->dev,
|
|
"%s: Fail to obtain pdata from device tree\n",
|
|
__func__);
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = wcd9xxx_dt_parse_slim_interface_dev_info(&slim->dev,
|
|
&pdata->slimbus_slave_device);
|
|
if (ret) {
|
|
dev_err(&slim->dev, "Error, parsing slim interface\n");
|
|
devm_kfree(&slim->dev, pdata);
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
slim->dev.platform_data = pdata;
|
|
|
|
} else {
|
|
dev_info(&slim->dev, "Platform data from board file\n");
|
|
pdata = slim->dev.platform_data;
|
|
}
|
|
|
|
if (!pdata) {
|
|
dev_err(&slim->dev, "Error, no platform data\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
if (!slim->ctrl) {
|
|
dev_err(&slim->dev, "%s: Error, no SLIMBUS control data\n",
|
|
__func__);
|
|
ret = -EINVAL;
|
|
goto err_codec;
|
|
}
|
|
device_id = slim_get_device_id(slim);
|
|
if (!device_id) {
|
|
dev_err(&slim->dev, "%s: Error, no device id\n", __func__);
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
wcd9xxx->type = device_id->driver_data;
|
|
dev_info(&slim->dev, "%s: probing for wcd type: %d, name: %s\n",
|
|
__func__, wcd9xxx->type, device_id->name);
|
|
|
|
/* wcd9xxx members init */
|
|
wcd9xxx->multi_reg_write = wcd9xxx_slim_multi_reg_write;
|
|
wcd9xxx->slim = slim;
|
|
slim_set_clientdata(slim, wcd9xxx);
|
|
wcd9xxx->reset_gpio = pdata->reset_gpio;
|
|
wcd9xxx->dev = &slim->dev;
|
|
wcd9xxx->mclk_rate = pdata->mclk_rate;
|
|
wcd9xxx->dev_up = true;
|
|
wcd9xxx->wcd_rst_np = pdata->wcd_rst_np;
|
|
|
|
wcd9xxx->regmap = wcd9xxx_regmap_init(&slim->dev,
|
|
&wcd9xxx_base_regmap_config);
|
|
if (IS_ERR(wcd9xxx->regmap)) {
|
|
ret = PTR_ERR(wcd9xxx->regmap);
|
|
dev_err(&slim->dev, "%s: Failed to allocate register map: %d\n",
|
|
__func__, ret);
|
|
goto err_codec;
|
|
}
|
|
|
|
if (!wcd9xxx->wcd_rst_np) {
|
|
pdata->use_pinctrl = false;
|
|
dev_err(&slim->dev, "%s: pinctrl not used for rst_n\n",
|
|
__func__);
|
|
goto err_codec;
|
|
}
|
|
|
|
wcd9xxx->num_of_supplies = pdata->num_supplies;
|
|
ret = msm_cdc_init_supplies(&slim->dev, &wcd9xxx->supplies,
|
|
pdata->regulator,
|
|
pdata->num_supplies);
|
|
if (!wcd9xxx->supplies) {
|
|
dev_err(wcd9xxx->dev, "%s: Cannot init wcd supplies\n",
|
|
__func__);
|
|
goto err_codec;
|
|
}
|
|
ret = msm_cdc_enable_static_supplies(wcd9xxx->dev,
|
|
wcd9xxx->supplies,
|
|
pdata->regulator,
|
|
pdata->num_supplies);
|
|
if (ret) {
|
|
dev_err(wcd9xxx->dev, "%s: wcd static supply enable failed!\n",
|
|
__func__);
|
|
goto err_codec;
|
|
}
|
|
|
|
/*
|
|
* For WCD9335, it takes about 600us for the Vout_A and
|
|
* Vout_D to be ready after BUCK_SIDO is powered up.
|
|
* SYS_RST_N shouldn't be pulled high during this time
|
|
*/
|
|
if (wcd9xxx->type == WCD9335 || wcd9xxx->type == WCD934X)
|
|
usleep_range(600, 650);
|
|
else
|
|
usleep_range(5, 10);
|
|
|
|
ret = wcd9xxx_reset(&slim->dev);
|
|
if (ret) {
|
|
dev_err(&slim->dev, "%s: Resetting Codec failed\n", __func__);
|
|
goto err_supplies;
|
|
}
|
|
|
|
ret = wcd9xxx_slim_get_laddr(wcd9xxx->slim, wcd9xxx->slim->e_addr,
|
|
ARRAY_SIZE(wcd9xxx->slim->e_addr),
|
|
&wcd9xxx->slim->laddr);
|
|
if (ret) {
|
|
dev_err(&slim->dev, "%s: failed to get slimbus %s logical address: %d\n",
|
|
__func__, wcd9xxx->slim->name, ret);
|
|
goto err_reset;
|
|
}
|
|
wcd9xxx->read_dev = wcd9xxx_slim_read_device;
|
|
wcd9xxx->write_dev = wcd9xxx_slim_write_device;
|
|
wcd9xxx_pgd_la = wcd9xxx->slim->laddr;
|
|
wcd9xxx->slim_slave = &pdata->slimbus_slave_device;
|
|
if (!wcd9xxx->dev->of_node)
|
|
wcd9xxx_assign_irq(&wcd9xxx->core_res,
|
|
pdata->irq, pdata->irq_base);
|
|
|
|
ret = slim_add_device(slim->ctrl, wcd9xxx->slim_slave);
|
|
if (ret) {
|
|
dev_err(&slim->dev, "%s: error, adding SLIMBUS device failed\n",
|
|
__func__);
|
|
goto err_reset;
|
|
}
|
|
|
|
ret = wcd9xxx_slim_get_laddr(wcd9xxx->slim_slave,
|
|
wcd9xxx->slim_slave->e_addr,
|
|
ARRAY_SIZE(wcd9xxx->slim_slave->e_addr),
|
|
&wcd9xxx->slim_slave->laddr);
|
|
if (ret) {
|
|
dev_err(&slim->dev, "%s: failed to get slimbus %s logical address: %d\n",
|
|
__func__, wcd9xxx->slim->name, ret);
|
|
goto err_slim_add;
|
|
}
|
|
wcd9xxx_inf_la = wcd9xxx->slim_slave->laddr;
|
|
wcd9xxx_set_intf_type(WCD9XXX_INTERFACE_TYPE_SLIMBUS);
|
|
|
|
ret = wcd9xxx_device_init(wcd9xxx);
|
|
if (ret) {
|
|
dev_err(&slim->dev, "%s: error, initializing device failed (%d)\n",
|
|
__func__, ret);
|
|
goto err_slim_add;
|
|
}
|
|
#ifdef CONFIG_DEBUG_FS
|
|
debugCodec = wcd9xxx;
|
|
|
|
debugfs_wcd9xxx_dent = debugfs_create_dir
|
|
("wcd9xxx_core", 0);
|
|
if (!IS_ERR(debugfs_wcd9xxx_dent)) {
|
|
debugfs_peek = debugfs_create_file("slimslave_peek",
|
|
S_IFREG | S_IRUSR, debugfs_wcd9xxx_dent,
|
|
(void *) "slimslave_peek", &codec_debug_ops);
|
|
|
|
debugfs_poke = debugfs_create_file("slimslave_poke",
|
|
S_IFREG | S_IRUSR, debugfs_wcd9xxx_dent,
|
|
(void *) "slimslave_poke", &codec_debug_ops);
|
|
|
|
debugfs_power_state = debugfs_create_file("power_state",
|
|
S_IFREG | S_IRUSR, debugfs_wcd9xxx_dent,
|
|
(void *) "power_state", &codec_debug_ops);
|
|
|
|
debugfs_reg_dump = debugfs_create_file("slimslave_reg_dump",
|
|
S_IFREG | S_IRUSR, debugfs_wcd9xxx_dent,
|
|
(void *) "slimslave_reg_dump", &codec_debug_ops);
|
|
}
|
|
#endif
|
|
|
|
return ret;
|
|
|
|
err_slim_add:
|
|
slim_remove_device(wcd9xxx->slim_slave);
|
|
err_reset:
|
|
wcd9xxx_reset_low(wcd9xxx->dev);
|
|
err_supplies:
|
|
msm_cdc_release_supplies(wcd9xxx->dev, wcd9xxx->supplies,
|
|
pdata->regulator,
|
|
pdata->num_supplies);
|
|
err_codec:
|
|
slim_set_clientdata(slim, NULL);
|
|
err:
|
|
devm_kfree(&slim->dev, wcd9xxx);
|
|
return ret;
|
|
}
|
|
static int wcd9xxx_slim_remove(struct slim_device *pdev)
|
|
{
|
|
struct wcd9xxx *wcd9xxx;
|
|
struct wcd9xxx_pdata *pdata = pdev->dev.platform_data;
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
debugfs_remove_recursive(debugfs_wcd9xxx_dent);
|
|
#endif
|
|
wcd9xxx = slim_get_devicedata(pdev);
|
|
wcd9xxx_deinit_slimslave(wcd9xxx);
|
|
slim_remove_device(wcd9xxx->slim_slave);
|
|
msm_cdc_release_supplies(wcd9xxx->dev, wcd9xxx->supplies,
|
|
pdata->regulator,
|
|
pdata->num_supplies);
|
|
wcd9xxx_device_exit(wcd9xxx);
|
|
slim_set_clientdata(pdev, NULL);
|
|
return 0;
|
|
}
|
|
|
|
static int wcd9xxx_device_up(struct wcd9xxx *wcd9xxx)
|
|
{
|
|
int ret = 0;
|
|
struct wcd9xxx_core_resource *wcd9xxx_res = &wcd9xxx->core_res;
|
|
|
|
dev_info(wcd9xxx->dev, "%s: codec bring up\n", __func__);
|
|
wcd9xxx_bringup(wcd9xxx->dev);
|
|
ret = wcd9xxx_irq_init(wcd9xxx_res);
|
|
if (ret) {
|
|
pr_err("%s: wcd9xx_irq_init failed : %d\n", __func__, ret);
|
|
} else {
|
|
if (wcd9xxx->post_reset)
|
|
ret = wcd9xxx->post_reset(wcd9xxx);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int wcd9xxx_slim_device_reset(struct slim_device *sldev)
|
|
{
|
|
int ret;
|
|
struct wcd9xxx *wcd9xxx = slim_get_devicedata(sldev);
|
|
|
|
if (!wcd9xxx) {
|
|
pr_err("%s: wcd9xxx is NULL\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_info(wcd9xxx->dev, "%s: device reset, dev_up = %d\n",
|
|
__func__, wcd9xxx->dev_up);
|
|
if (wcd9xxx->dev_up)
|
|
return 0;
|
|
|
|
mutex_lock(&wcd9xxx->reset_lock);
|
|
ret = wcd9xxx_reset(wcd9xxx->dev);
|
|
if (ret)
|
|
dev_err(wcd9xxx->dev, "%s: Resetting Codec failed\n", __func__);
|
|
mutex_unlock(&wcd9xxx->reset_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wcd9xxx_slim_device_up(struct slim_device *sldev)
|
|
{
|
|
struct wcd9xxx *wcd9xxx = slim_get_devicedata(sldev);
|
|
int ret = 0;
|
|
|
|
if (!wcd9xxx) {
|
|
pr_err("%s: wcd9xxx is NULL\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
dev_info(wcd9xxx->dev, "%s: slim device up, dev_up = %d\n",
|
|
__func__, wcd9xxx->dev_up);
|
|
if (wcd9xxx->dev_up)
|
|
return 0;
|
|
|
|
wcd9xxx->dev_up = true;
|
|
|
|
mutex_lock(&wcd9xxx->reset_lock);
|
|
ret = wcd9xxx_device_up(wcd9xxx);
|
|
mutex_unlock(&wcd9xxx->reset_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wcd9xxx_slim_device_down(struct slim_device *sldev)
|
|
{
|
|
struct wcd9xxx *wcd9xxx = slim_get_devicedata(sldev);
|
|
|
|
if (!wcd9xxx) {
|
|
pr_err("%s: wcd9xxx is NULL\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_info(wcd9xxx->dev, "%s: device down, dev_up = %d\n",
|
|
__func__, wcd9xxx->dev_up);
|
|
if (!wcd9xxx->dev_up)
|
|
return 0;
|
|
|
|
wcd9xxx->dev_up = false;
|
|
|
|
mutex_lock(&wcd9xxx->reset_lock);
|
|
if (wcd9xxx->dev_down)
|
|
wcd9xxx->dev_down(wcd9xxx);
|
|
wcd9xxx_irq_exit(&wcd9xxx->core_res);
|
|
wcd9xxx_reset_low(wcd9xxx->dev);
|
|
mutex_unlock(&wcd9xxx->reset_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wcd9xxx_slim_resume(struct slim_device *sldev)
|
|
{
|
|
struct wcd9xxx *wcd9xxx = slim_get_devicedata(sldev);
|
|
|
|
return wcd9xxx_core_res_resume(&wcd9xxx->core_res);
|
|
}
|
|
|
|
static int wcd9xxx_i2c_resume(struct device *dev)
|
|
{
|
|
struct wcd9xxx *wcd9xxx = dev_get_drvdata(dev);
|
|
|
|
if (wcd9xxx)
|
|
return wcd9xxx_core_res_resume(&wcd9xxx->core_res);
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static int wcd9xxx_slim_suspend(struct slim_device *sldev, pm_message_t pmesg)
|
|
{
|
|
struct wcd9xxx *wcd9xxx = slim_get_devicedata(sldev);
|
|
|
|
return wcd9xxx_core_res_suspend(&wcd9xxx->core_res, pmesg);
|
|
}
|
|
|
|
static int wcd9xxx_i2c_suspend(struct device *dev)
|
|
{
|
|
struct wcd9xxx *wcd9xxx = dev_get_drvdata(dev);
|
|
pm_message_t pmesg = {0};
|
|
|
|
if (wcd9xxx)
|
|
return wcd9xxx_core_res_suspend(&wcd9xxx->core_res, pmesg);
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static const struct slim_device_id wcd_slim_device_id[] = {
|
|
{"sitar-slim", 0},
|
|
{"sitar1p1-slim", 0},
|
|
{"tabla-slim", 0},
|
|
{"tabla2x-slim", 0},
|
|
{"taiko-slim-pgd", 0},
|
|
{"tapan-slim-pgd", 0},
|
|
{"tomtom-slim-pgd", WCD9330},
|
|
{"tasha-slim-pgd", WCD9335},
|
|
{"tavil-slim-pgd", WCD934X},
|
|
{}
|
|
};
|
|
|
|
static struct slim_driver wcd_slim_driver = {
|
|
.driver = {
|
|
.name = "wcd-slim",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = wcd9xxx_slim_probe,
|
|
.remove = wcd9xxx_slim_remove,
|
|
.id_table = wcd_slim_device_id,
|
|
.resume = wcd9xxx_slim_resume,
|
|
.suspend = wcd9xxx_slim_suspend,
|
|
.device_up = wcd9xxx_slim_device_up,
|
|
.reset_device = wcd9xxx_slim_device_reset,
|
|
.device_down = wcd9xxx_slim_device_down,
|
|
};
|
|
|
|
static struct i2c_device_id wcd9xxx_id_table[] = {
|
|
{"wcd9xxx-i2c", WCD9XXX_I2C_TOP_LEVEL},
|
|
{"wcd9xxx-i2c", WCD9XXX_I2C_ANALOG},
|
|
{"wcd9xxx-i2c", WCD9XXX_I2C_DIGITAL_1},
|
|
{"wcd9xxx-i2c", WCD9XXX_I2C_DIGITAL_2},
|
|
{}
|
|
};
|
|
|
|
static struct i2c_device_id tasha_id_table[] = {
|
|
{"tasha-i2c-pgd", WCD9XXX_I2C_TOP_LEVEL},
|
|
{}
|
|
};
|
|
|
|
static struct i2c_device_id tabla_id_table[] = {
|
|
{"tabla top level", WCD9XXX_I2C_TOP_LEVEL},
|
|
{"tabla analog", WCD9XXX_I2C_ANALOG},
|
|
{"tabla digital1", WCD9XXX_I2C_DIGITAL_1},
|
|
{"tabla digital2", WCD9XXX_I2C_DIGITAL_2},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tabla_id_table);
|
|
|
|
static const struct dev_pm_ops wcd9xxx_i2c_pm_ops = {
|
|
.suspend = wcd9xxx_i2c_suspend,
|
|
.resume = wcd9xxx_i2c_resume,
|
|
};
|
|
|
|
static struct i2c_driver tabla_i2c_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "tabla-i2c-core",
|
|
.pm = &wcd9xxx_i2c_pm_ops,
|
|
},
|
|
.id_table = tabla_id_table,
|
|
.probe = wcd9xxx_i2c_probe,
|
|
.remove = wcd9xxx_i2c_remove,
|
|
};
|
|
|
|
static struct i2c_driver wcd9xxx_i2c_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "wcd9xxx-i2c-core",
|
|
.pm = &wcd9xxx_i2c_pm_ops,
|
|
},
|
|
.id_table = wcd9xxx_id_table,
|
|
.probe = wcd9xxx_i2c_probe,
|
|
.remove = wcd9xxx_i2c_remove,
|
|
};
|
|
|
|
static struct i2c_driver wcd9335_i2c_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "tasha-i2c-core",
|
|
.pm = &wcd9xxx_i2c_pm_ops,
|
|
},
|
|
.id_table = tasha_id_table,
|
|
.probe = wcd9xxx_i2c_probe,
|
|
.remove = wcd9xxx_i2c_remove,
|
|
};
|
|
|
|
static int __init wcd9xxx_init(void)
|
|
{
|
|
int ret[NUM_WCD9XXX_REG_RET] = {0};
|
|
int i = 0;
|
|
|
|
wcd9xxx_set_intf_type(WCD9XXX_INTERFACE_TYPE_PROBING);
|
|
|
|
ret[0] = i2c_add_driver(&tabla_i2c_driver);
|
|
if (ret[0])
|
|
pr_err("%s: Failed to add the tabla2x I2C driver: %d\n",
|
|
__func__, ret[0]);
|
|
|
|
ret[1] = i2c_add_driver(&wcd9xxx_i2c_driver);
|
|
if (ret[1])
|
|
pr_err("%s: Failed to add the wcd9xxx I2C driver: %d\n",
|
|
__func__, ret[1]);
|
|
|
|
ret[2] = i2c_add_driver(&wcd9335_i2c_driver);
|
|
if (ret[2])
|
|
pr_err("%s: Failed to add the wcd9335 I2C driver: %d\n",
|
|
__func__, ret[2]);
|
|
|
|
ret[3] = slim_driver_register(&wcd_slim_driver);
|
|
if (ret[3])
|
|
pr_err("%s: Failed to register wcd SB driver: %d\n",
|
|
__func__, ret[3]);
|
|
|
|
for (i = 0; i < NUM_WCD9XXX_REG_RET; i++) {
|
|
if (ret[i])
|
|
return ret[i];
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
module_init(wcd9xxx_init);
|
|
|
|
static void __exit wcd9xxx_exit(void)
|
|
{
|
|
wcd9xxx_set_intf_type(WCD9XXX_INTERFACE_TYPE_PROBING);
|
|
|
|
i2c_del_driver(&tabla_i2c_driver);
|
|
i2c_del_driver(&wcd9xxx_i2c_driver);
|
|
i2c_del_driver(&wcd9335_i2c_driver);
|
|
slim_driver_unregister(&wcd_slim_driver);
|
|
}
|
|
module_exit(wcd9xxx_exit);
|
|
|
|
MODULE_DESCRIPTION("Codec core driver");
|
|
MODULE_VERSION("1.0");
|
|
MODULE_LICENSE("GPL v2");
|