Sergei Shtylyov 0e9a3ddc91 davinci: DA830 EVM: OHCI platform code ... On this board the OHCI port's power control and over-current signals from TPS2065 power switch are connected via GPIO1[15] and GPIO2[1] respectively, so we can implement the DA8xx OHCI glue layer's hooks for overriding the root hub port's power and over-current status bits. We also have to properly set up the clocking mode in the CFGCHIP2 register, so that internal 24 MHz reference clock is fed to the USB 2.0 (MUSB) PHY and its output is used to clock the USB 1.1 (OHCI) PHY... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>		2009-11-25 10:21:27 -08:00
..
include/mach	davinci: DA8xx: OHCI platform device	2009-11-25 10:21:27 -08:00
board-da830-evm.c	davinci: DA830 EVM: OHCI platform code	2009-11-25 10:21:27 -08:00
board-da850-evm.c	davinci: Correct the GPIO number for LCD panel power	2009-11-25 10:21:23 -08:00
board-dm355-evm.c	davinci: DM355: Update NAND driver platform data	2009-11-25 10:21:24 -08:00
board-dm355-leopard.c	ARM: includecheck fix: board-dm355-leopard.c	2009-07-25 17:07:01 +01:00
board-dm365-evm.c	davinci: DM365: Update NAND driver platform data	2009-11-25 10:21:25 -08:00
board-dm644x-evm.c	davinci: DM644x platform changes for vpfe capture	2009-09-16 10:25:26 -07:00
board-dm646x-evm.c	DaVinci: DM646x - platform changes for vpif capture and display drivers	2009-09-16 10:28:46 -07:00
board-sffsdr.c	ARM: includecheck fix: board-sffsdr.c	2009-07-25 17:07:02 +01:00
clock.c	davinci: support re-parenting a clock in the clock framework	2009-11-25 10:21:21 -08:00
clock.h	davinci: DA850/OMAP-L138: allow async3 source to be changed	2009-11-25 10:21:21 -08:00
common.c	davinci: Integrate cp_intc support into low-level irq code	2009-05-28 15:17:47 -07:00
cp_intc.c	davinci: INTC: add support for TI cp_intc	2009-05-26 07:18:14 -07:00
da830.c	davinci: Add LCD Graphics support for DA830/OMAP-L137 EVM	2009-11-25 10:21:23 -08:00
da850.c	davinci: Correct the GPIO number for LCD panel power	2009-11-25 10:21:23 -08:00
devices-da8xx.c	davinci: Add RTC support for DA8xx/OMAP-L13x SoC's	2009-11-25 10:21:23 -08:00
devices.c	DaVinci: DM365: SDIO interrupt resource correction	2009-11-25 10:21:16 -08:00
dm355.c	davinci: DM355 - platform changes for vpfe capture	2009-09-16 10:25:45 -07:00
dm365.c	Davinci: DM365: Add platform device for McBSP	2009-11-25 10:21:17 -08:00
dm644x.c	davinci: DM644x platform changes for vpfe capture	2009-09-16 10:25:26 -07:00
dm646x.c	davinci: dm646x: Add support for 3.x silicon revision	2009-11-25 10:21:22 -08:00
dma.c	DaVinci: EDMA: Updating terminlogy in EDMA driver	2009-11-25 10:21:26 -08:00
gpio.c	davinci: dm365 gpio irq support	2009-08-26 10:57:00 +03:00
io.c	davinci: Encapsulate SoC-specific data in a structure	2009-05-26 08:14:04 -07:00
irq.c	davinci: Move interrupt ctlr info to SoC infrastructure	2009-05-26 08:18:09 -07:00
Kconfig	davinci: Add LCD Graphics support for DA830/OMAP-L137 EVM	2009-11-25 10:21:23 -08:00
Makefile	davinci: Add support for DA850/OMAP-L138 EVM board	2009-08-26 11:55:45 +03:00
Makefile.boot	davinci: da8xx: Add base DA830/OMAP-L137 SoC support	2009-08-26 10:56:59 +03:00
mux.c	davinci: Rearrange the da830/omap-l137 macros and functions	2009-08-26 10:57:02 +03:00
mux.h	davinci: update pin-multiplexing support	2009-04-27 09:49:46 -07:00
psc.c	davinci: Add support for multiple PSCs	2009-05-26 08:16:46 -07:00
serial.c	davinci: Move serial platform_device into SoC-specific files	2009-05-28 15:17:41 -07:00
sram.c	davinci: sram warning fix	2009-08-26 10:56:57 +03:00
time.c	davinci: remove watchdog from soc_info	2009-08-26 10:56:57 +03:00
usb.c	davinci: DA8xx: OHCI platform device	2009-11-25 10:21:27 -08:00