android_kernel_oneplus_msm8998/arch/arm/mach-exynos/cpuidle.c
Amit Daniel Kachhap 1e9fec0e40 ARM: EXYNOS: Skip C1 cpuidle state for exynos5440
This patch skips the deep C1(AFTR -Arm off top running) state for
exynos5440 SoC as this soc does not support this state. The cpu's
only allows the basic C0 state.
The C1 state is filtered by re-initialising the driver state_count
value to 1.

Suggested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-28 00:51:21 +09:00

228 lines
5.6 KiB
C

/* linux/arch/arm/mach-exynos4/cpuidle.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/io.h>
#include <linux/export.h>
#include <linux/time.h>
#include <asm/proc-fns.h>
#include <asm/smp_scu.h>
#include <asm/suspend.h>
#include <asm/unified.h>
#include <asm/cpuidle.h>
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
#include "common.h"
#define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
#define REG_DIRECTGO_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
(S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))
#define S5P_CHECK_AFTR 0xFCBA0D10
static int exynos4_enter_lowpower(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index);
static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
static struct cpuidle_driver exynos4_idle_driver = {
.name = "exynos4_idle",
.owner = THIS_MODULE,
.states = {
[0] = ARM_CPUIDLE_WFI_STATE,
[1] = {
.enter = exynos4_enter_lowpower,
.exit_latency = 300,
.target_residency = 100000,
.flags = CPUIDLE_FLAG_TIME_VALID,
.name = "C1",
.desc = "ARM power down",
},
},
.state_count = 2,
.safe_state_index = 0,
};
/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
static void exynos4_set_wakeupmask(void)
{
__raw_writel(0x0000ff3e, S5P_WAKEUP_MASK);
}
static unsigned int g_pwr_ctrl, g_diag_reg;
static void save_cpu_arch_register(void)
{
/*read power control register*/
asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc");
/*read diagnostic register*/
asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
return;
}
static void restore_cpu_arch_register(void)
{
/*write power control register*/
asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc");
/*write diagnostic register*/
asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
return;
}
static int idle_finisher(unsigned long flags)
{
cpu_do_idle();
return 1;
}
static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
unsigned long tmp;
exynos4_set_wakeupmask();
/* Set value of power down register for aftr mode */
exynos_sys_powerdown_conf(SYS_AFTR);
__raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR);
__raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
save_cpu_arch_register();
/* Setting Central Sequence Register for power down mode */
tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
cpu_pm_enter();
cpu_suspend(0, idle_finisher);
#ifdef CONFIG_SMP
if (!soc_is_exynos5250())
scu_enable(S5P_VA_SCU);
#endif
cpu_pm_exit();
restore_cpu_arch_register();
/*
* If PMU failed while entering sleep mode, WFI will be
* ignored by PMU and then exiting cpu_do_idle().
* S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
* in this situation.
*/
tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
tmp |= S5P_CENTRAL_LOWPWR_CFG;
__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
}
/* Clear wakeup state register */
__raw_writel(0x0, S5P_WAKEUP_STAT);
return index;
}
static int exynos4_enter_lowpower(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
int new_index = index;
/* This mode only can be entered when other core's are offline */
if (num_online_cpus() > 1)
new_index = drv->safe_state_index;
if (new_index == 0)
return arm_cpuidle_simple_enter(dev, drv, new_index);
else
return exynos4_enter_core0_aftr(dev, drv, new_index);
}
static void __init exynos5_core_down_clk(void)
{
unsigned int tmp;
/*
* Enable arm clock down (in idle) and set arm divider
* ratios in WFI/WFE state.
*/
tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \
PWR_CTRL1_CORE1_DOWN_RATIO | \
PWR_CTRL1_DIV2_DOWN_EN | \
PWR_CTRL1_DIV1_DOWN_EN | \
PWR_CTRL1_USE_CORE1_WFE | \
PWR_CTRL1_USE_CORE0_WFE | \
PWR_CTRL1_USE_CORE1_WFI | \
PWR_CTRL1_USE_CORE0_WFI;
__raw_writel(tmp, EXYNOS5_PWR_CTRL1);
/*
* Enable arm clock up (on exiting idle). Set arm divider
* ratios when not in idle along with the standby duration
* ratios.
*/
tmp = PWR_CTRL2_DIV2_UP_EN | \
PWR_CTRL2_DIV1_UP_EN | \
PWR_CTRL2_DUR_STANDBY2_VAL | \
PWR_CTRL2_DUR_STANDBY1_VAL | \
PWR_CTRL2_CORE2_UP_RATIO | \
PWR_CTRL2_CORE1_UP_RATIO;
__raw_writel(tmp, EXYNOS5_PWR_CTRL2);
}
static int __init exynos4_init_cpuidle(void)
{
int cpu_id, ret;
struct cpuidle_device *device;
if (soc_is_exynos5250())
exynos5_core_down_clk();
if (soc_is_exynos5440())
exynos4_idle_driver.state_count = 1;
ret = cpuidle_register_driver(&exynos4_idle_driver);
if (ret) {
printk(KERN_ERR "CPUidle failed to register driver\n");
return ret;
}
for_each_online_cpu(cpu_id) {
device = &per_cpu(exynos4_cpuidle_device, cpu_id);
device->cpu = cpu_id;
/* Support IDLE only */
if (cpu_id != 0)
device->state_count = 1;
ret = cpuidle_register_device(device);
if (ret) {
printk(KERN_ERR "CPUidle register device failed\n");
return ret;
}
}
return 0;
}
device_initcall(exynos4_init_cpuidle);