android_kernel_oneplus_msm8998/drivers/usb
Kai-Heng Feng 80c305aeeb USB: Consolidate LPM checks to avoid enabling LPM twice
commit d7a6c0ce8d26412903c7981503bad9e1cc7c45d2 upstream.

USB Bluetooth controller QCA ROME (0cf3:e007) sometimes stops working
after S3:
[ 165.110742] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 168.432065] Bluetooth: hci0: Failed to send body at 4 of 1953 (-110)

After some experiments, I found that disabling LPM can workaround the
issue.

On some platforms, the USB power is cut during S3, so the driver uses
reset-resume to resume the device. During port resume, LPM gets enabled
twice, by usb_reset_and_verify_device() and usb_port_resume().

Consolidate all checks into new LPM helpers to make sure LPM only gets
enabled once.

Fixes: de68bab4fa ("usb: Don't enable USB 2.0 Link PM by default.”)
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org> # after much soaking
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16 19:44:44 +02:00
..
atm
c67x00
chipidea usb: chipidea: Grab the (legacy) USB PHY by phandle first 2019-04-27 09:33:49 +02:00
class usb: cdc-acm: send ZLP for Telit 3G Intel based modems 2019-01-16 22:16:10 +01:00
common
core USB: Consolidate LPM checks to avoid enabling LPM twice 2019-05-16 19:44:44 +02:00
dwc2 usb: dwc2: Remove unnecessary kfree 2019-02-20 10:13:24 +01:00
dwc3 usb: dwc3: gadget: Fix suspend/resume during device mode 2019-04-03 06:23:17 +02:00
early
gadget usb: gadget: rndis: free response queue during REMOTE_NDIS_RESET_MSG 2019-04-03 06:23:24 +02:00
host xhci: Fix port resume done detection for SS ports with LPM enabled 2019-04-03 06:23:28 +02:00
image
isp1760
misc usb: appledisplay: Add 27" Apple Cinema Display 2018-12-13 09:21:35 +01:00
mon
musb usb: musb: fix remote wakeup racing with suspend 2018-07-03 11:21:24 +02:00
phy usb: phy: am335x: fix race condition in _probe 2019-02-20 10:13:16 +01:00
renesas_usbhs usb: renesas_usbhs: gadget: fix unused-but-set-variable warning 2019-04-03 06:23:19 +02:00
serial USB: serial: option: add Olicard 600 2019-04-03 06:23:28 +02:00
storage USB: storage: add quirk for SMI SM3350 2019-01-16 22:16:10 +01:00
usbip usbip: usbip_host: fix bad unlock balance during stub_probe() 2018-05-26 08:48:52 +02:00
wusbcore usb: wusbcore: security: cast sizeof to int for comparison 2018-10-10 08:52:05 +02:00
Kconfig
Makefile
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.