android_kernel_oneplus_msm8998/drivers/usb
Felipe F. Tonello 3b48ece37e usb: gadget: align buffer size when allocating for OUT endpoint
commit e0466156ee2e944fb47a3fa00932c3698a6d2c67 upstream.

Using usb_ep_align() makes sure that the buffer size for OUT endpoints is
always aligned with wMaxPacketSize (512 usually). This makes sure
that no buffer has the wrong size, which can cause nasty bugs.

Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-08 11:51:56 +02:00
..
atm USB: atm: cxacru: fix blank line after declaration 2015-07-22 14:55:22 -07:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea usb: chipidea: vbus event may exist before starting gadget 2017-10-08 10:14:18 +02:00
class CDC-ACM: apply quirk for card reader 2018-02-03 17:04:30 +01:00
common usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices 2016-09-07 08:32:39 +02:00
core usb: quirks: add control message delay for 1b1c:1b20 2018-03-18 11:17:53 +01:00
dwc2 usb: dwc2: Make sure we disconnect the gadget state 2018-03-22 09:23:26 +01:00
dwc3 usb: dwc3: gadget: Set maxpacket size for ep0 IN 2018-02-28 10:17:23 +01:00
early
gadget usb: gadget: align buffer size when allocating for OUT endpoint 2018-04-08 11:51:56 +02:00
host usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks() 2018-02-28 10:17:22 +01:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc usb: ldusb: add PIDs for new CASSY devices supported by this driver 2018-02-28 10:17:23 +01:00
mon usb: usbmon: Read text within supplied buffer size 2018-03-18 11:17:53 +01:00
musb usb: musb/ux500: remove duplicate check for dma_is_compatible 2018-02-25 11:03:45 +01:00
phy usb: phy: msm add regulator dependency 2018-02-25 11:03:51 +01:00
renesas_usbhs usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path 2018-02-28 10:17:23 +01:00
serial USB: serial: simple: add Motorola Tetra driver 2018-02-03 17:04:30 +01:00
storage USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h 2018-03-18 11:17:53 +01:00
usbip usbip: keep usbip_device sockfd state in sync with tcp_socket 2018-02-25 11:03:38 +01:00
wusbcore USB: wusbcore: fix NULL-deref at probe 2017-03-30 09:35:17 +02:00
Kconfig
Makefile usb-host: Remove fusbh200 driver 2015-10-16 23:44:33 -07:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.