4b7c952db6
* remotes/origin/tmp-2f0de51:
Linux 4.4.38
esp6: Fix integrity verification when ESN are used
esp4: Fix integrity verification when ESN are used
ipv4: Set skb->protocol properly for local output
ipv6: Set skb->protocol properly for local output
Don't feed anything but regular iovec's to blk_rq_map_user_iov
constify iov_iter_count() and iter_is_iovec()
sparc64: fix compile warning section mismatch in find_node()
sparc64: Fix find_node warning if numa node cannot be found
sparc32: Fix inverted invalid_frame_pointer checks on sigreturns
net: ping: check minimum size on ICMP header length
net: avoid signed overflows for SO_{SND|RCV}BUFFORCE
geneve: avoid use-after-free of skb->data
sh_eth: remove unchecked interrupts for RZ/A1
net: bcmgenet: Utilize correct struct device for all DMA operations
packet: fix race condition in packet_set_ring
net/dccp: fix use-after-free in dccp_invalid_packet
netlink: Do not schedule work from sk_destruct
netlink: Call cb->done from a worker thread
net/sched: pedit: make sure that offset is valid
net, sched: respect rcu grace period on cls destruction
net: dsa: bcm_sf2: Ensure we re-negotiate EEE during after link change
l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()
rtnetlink: fix FDB size computation
af_unix: conditionally use freezable blocking calls in read
net: sky2: Fix shutdown crash
ip6_tunnel: disable caching when the traffic class is inherited
net: check dead netns for peernet2id_alloc()
virtio-net: add a missing synchronize_net()
Linux 4.4.37
arm64: suspend: Reconfigure PSTATE after resume from idle
arm64: mm: Set PSTATE.PAN from the cpu_enable_pan() call
arm64: cpufeature: Schedule enable() calls instead of calling them via IPI
pwm: Fix device reference leak
mwifiex: printk() overflow with 32-byte SSIDs
PCI: Set Read Completion Boundary to 128 iff Root Port supports it (_HPX)
PCI: Export pcie_find_root_port
rcu: Fix soft lockup for rcu_nocb_kthread
ALSA: pcm : Call kill_fasync() in stream lock
x86/traps: Ignore high word of regs->cs in early_fixup_exception()
kasan: update kasan_global for gcc 7
zram: fix unbalanced idr management at hot removal
ARC: Don't use "+l" inline asm constraint
Linux 4.4.36
scsi: mpt3sas: Unblock device after controller reset
flow_dissect: call init_default_flow_dissectors() earlier
mei: fix return value on disconnection
mei: me: fix place for kaby point device ids.
mei: me: disable driver on SPT SPS firmware
drm/radeon: Ensure vblank interrupt is enabled on DPMS transition to on
mpi: Fix NULL ptr dereference in mpi_powm() [ver #3]
parisc: Also flush data TLB in flush_icache_page_asm
parisc: Fix race in pci-dma.c
parisc: Fix races in parisc_setup_cache_timing()
NFSv4.x: hide array-bounds warning
apparmor: fix change_hat not finding hat after policy replacement
cfg80211: limit scan results cache size
tile: avoid using clocksource_cyc2ns with absolute cycle count
scsi: mpt3sas: Fix secure erase premature termination
Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y
USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad
USB: serial: cp210x: add ID for the Zone DPMX
usb: chipidea: move the lock initialization to core file
KVM: x86: check for pic and ioapic presence before use
KVM: x86: drop error recovery in em_jmp_far and em_ret_far
iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions
iommu/vt-d: Fix PASID table allocation
sched: tune: Fix lacking spinlock initialization
UPSTREAM: trace: Update documentation for mono, mono_raw and boot clock
UPSTREAM: trace: Add an option for boot clock as trace clock
UPSTREAM: timekeeping: Add a fast and NMI safe boot clock
ANDROID: goldfish_pipe: fix allmodconfig build
ANDROID: goldfish: goldfish_pipe: fix locking errors
ANDROID: video: goldfishfb: fix platform_no_drv_owner.cocci warnings
ANDROID: goldfish_pipe: fix call_kern.cocci warnings
arm64: rename ranchu defconfig to ranchu64
ANDROID: arch: x86: disable pic for Android toolchain
ANDROID: goldfish_pipe: An implementation of more parallel pipe
ANDROID: goldfish_pipe: bugfixes and performance improvements.
ANDROID: goldfish: Add goldfish sync driver
ANDROID: goldfish: add ranchu defconfigs
ANDROID: goldfish_audio: Clear audio read buffer status after each read
ANDROID: goldfish_events: no extra EV_SYN; register goldfish
ANDROID: goldfish_fb: Set pixclock = 0
ANDROID: goldfish: Enable ACPI-based enumeration for goldfish audio
ANDROID: goldfish: Enable ACPI-based enumeration for goldfish framebuffer
ANDROID: video: goldfishfb: add devicetree bindings
BACKPORT: staging: goldfish: audio: fix compiliation on arm
BACKPORT: Input: goldfish_events - enable ACPI-based enumeration for goldfish events
BACKPORT: goldfish: Enable ACPI-based enumeration for goldfish battery
BACKPORT: drivers: tty: goldfish: Add device tree bindings
BACKPORT: tty: goldfish: support platform_device with id -1
BACKPORT: Input: goldfish_events - add devicetree bindings
BACKPORT: power: goldfish_battery: add devicetree bindings
BACKPORT: staging: goldfish: audio: add devicetree bindings
ANDROID: usb: gadget: function: cleanup: Add blank line after declaration
cpufreq: sched: Fix kernel crash on accessing sysfs file
usb: gadget: f_mtp: simplify ptp NULL pointer check
cgroup: replace unified-hierarchy.txt with a proper cgroup v2 documentation
cgroup: rename Documentation/cgroups/ to Documentation/cgroup-legacy/
cgroup: replace __DEVEL__sane_behavior with cgroup2 fs type
writeback: initialize inode members that track writeback history
mm: page_alloc: generalize the dirty balance reserve
block: fix module reference leak on put_disk() call for cgroups throttle
Linux 4.4.35
netfilter: nft_dynset: fix element timeout for HZ != 1000
IB/cm: Mark stale CM id's whenever the mad agent was unregistered
IB/uverbs: Fix leak of XRC target QPs
IB/core: Avoid unsigned int overflow in sg_alloc_table
IB/mlx5: Fix fatal error dispatching
IB/mlx5: Use cache line size to select CQE stride
IB/mlx4: Fix create CQ error flow
IB/mlx4: Check gid_index return value
PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails
PM / sleep: fix device reference leak in test_suspend
uwb: fix device reference leaks
mfd: core: Fix device reference leak in mfd_clone_cell
iwlwifi: pcie: fix SPLC structure parsing
rtc: omap: Fix selecting external osc
clk: mmp: mmp2: fix return value check in mmp2_clk_init()
clk: mmp: pxa168: fix return value check in pxa168_clk_init()
clk: mmp: pxa910: fix return value check in pxa910_clk_init()
drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)
crypto: caam - do not register AES-XTS mode on LP units
ext4: sanity check the block and cluster size at mount time
kbuild: Steal gcc's pie from the very beginning
x86/kexec: add -fno-PIE
scripts/has-stack-protector: add -fno-PIE
kbuild: add -fno-PIE
i2c: mux: fix up dependencies
can: bcm: fix warning in bcm_connect/proc_register
mfd: intel-lpss: Do not put device in reset state on suspend
fuse: fix fuse_write_end() if zero bytes were copied
KVM: Disable irq while unregistering user notifier
KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr
x86/cpu/AMD: Fix cpu_llc_id for AMD Fam17h systems
Linux 4.4.34
sparc64: Delete now unused user copy fixup functions.
sparc64: Delete now unused user copy assembler helpers.
sparc64: Convert U3copy_{from,to}_user to accurate exception reporting.
sparc64: Convert NG2copy_{from,to}_user to accurate exception reporting.
sparc64: Convert NGcopy_{from,to}_user to accurate exception reporting.
sparc64: Convert NG4copy_{from,to}_user to accurate exception reporting.
sparc64: Convert U1copy_{from,to}_user to accurate exception reporting.
sparc64: Convert GENcopy_{from,to}_user to accurate exception reporting.
sparc64: Convert copy_in_user to accurate exception reporting.
sparc64: Prepare to move to more saner user copy exception handling.
sparc64: Delete __ret_efault.
sparc64: Handle extremely large kernel TLB range flushes more gracefully.
sparc64: Fix illegal relative branches in hypervisor patched TLB cross-call code.
sparc64: Fix instruction count in comment for __hypervisor_flush_tlb_pending.
sparc64: Fix illegal relative branches in hypervisor patched TLB code.
sparc64: Handle extremely large kernel TSB range flushes sanely.
sparc: Handle negative offsets in arch_jump_label_transform
sparc64 mm: Fix base TSB sizing when hugetlb pages are used
sparc: serial: sunhv: fix a double lock bug
sparc: Don't leak context bits into thread->fault_address
tty: Prevent ldisc drivers from re-using stale tty fields
tcp: take care of truncations done by sk_filter()
ipv4: use new_gw for redirect neigh lookup
net: __skb_flow_dissect() must cap its return value
sock: fix sendmmsg for partial sendmsg
fib_trie: Correct /proc/net/route off by one error
sctp: assign assoc_id earlier in __sctp_connect
ipv6: dccp: add missing bind_conflict to dccp_ipv6_mapped
ipv6: dccp: fix out of bound access in dccp_v6_err()
dccp: fix out of bound access in dccp_v4_err()
dccp: do not send reset to already closed sockets
tcp: fix potential memory corruption
ip6_tunnel: Clear IP6CB in ip6tunnel_xmit()
bgmac: stop clearing DMA receive control register right after it is set
net: mangle zero checksum in skb_checksum_help()
net: clear sk_err_soft in sk_clone_lock()
dctcp: avoid bogus doubling of cwnd after loss
ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hook
Linux 4.4.33
netfilter: fix namespace handling in nf_log_proc_dostring
btrfs: qgroup: Prevent qgroup->reserved from going subzero
mmc: mxs: Initialize the spinlock prior to using it
ASoC: sun4i-codec: return error code instead of NULL when create_card fails
ACPI / APEI: Fix incorrect return value of ghes_proc()
i40e: fix call of ndo_dflt_bridge_getlink()
hwrng: core - Don't use a stack buffer in add_early_randomness()
lib/genalloc.c: start search from start of chunk
mei: bus: fix received data size check in NFC fixup
iommu/vt-d: Fix dead-locks in disable_dmar_iommu() path
iommu/amd: Free domain id when free a domain of struct dma_ops_domain
tty/serial: at91: fix hardware handshake on Atmel platforms
dmaengine: at_xdmac: fix spurious flag status for mem2mem transfers
drm/i915: Respect alternate_ddc_pin for all DDI ports
KVM: MIPS: Precalculate MMIO load resume PC
scsi: mpt3sas: Fix for block device of raid exists even after deleting raid disk
scsi: qla2xxx: Fix scsi scan hang triggered if adapter fails during init
iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation.
clk: qoriq: Don't allow CPU clocks higher than starting value
toshiba-wmi: Fix loading the driver on non Toshiba laptops
drbd: Fix kernel_sendmsg() usage - potential NULL deref
usb: gadget: u_ether: remove interrupt throttling
USB: cdc-acm: fix TIOCMIWAIT
staging: nvec: remove managed resource from PS2 driver
Revert "staging: nvec: ps2: change serio type to passthrough"
drivers: staging: nvec: remove bogus reset command for PS/2 interface
staging: iio: ad5933: avoid uninitialized variable in error case
pinctrl: cherryview: Prevent possible interrupt storm on resume
pinctrl: cherryview: Serialize register access in suspend/resume
ARC: timer: rtc: implement read loop in "C" vs. inline asm
s390/hypfs: Use get_free_page() instead of kmalloc to ensure page alignment
coredump: fix unfreezable coredumping task
swapfile: fix memory corruption via malformed swapfile
dib0700: fix nec repeat handling
ASoC: cs4270: fix DAPM stream name mismatch
ALSA: info: Limit the proc text input size
ALSA: info: Return error for invalid read/write
arm64: Enable KPROBES/HIBERNATION/CORESIGHT in defconfig
arm64: kvm: allows kvm cpu hotplug
arm64: KVM: Register CPU notifiers when the kernel runs at HYP
arm64: KVM: Skip HYP setup when already running in HYP
arm64: hyp/kvm: Make hyp-stub reject kvm_call_hyp()
arm64: hyp/kvm: Make hyp-stub extensible
arm64: kvm: Move lr save/restore from do_el2_call into EL1
arm64: kvm: deal with kernel symbols outside of linear mapping
arm64: introduce KIMAGE_VADDR as the virtual base of the kernel region
ANDROID: video: adf: Avoid directly referencing user pointers
ANDROID: usb: gadget: audio_source: fix comparison of distinct pointer types
android: binder: support for file-descriptor arrays.
android: binder: support for scatter-gather.
android: binder: add extra size to allocator.
android: binder: refactor binder_transact()
android: binder: support multiple /dev instances.
android: binder: deal with contexts in debugfs.
android: binder: support multiple context managers.
android: binder: split flat_binder_object.
disable aio support in recommended configuration
Linux 4.4.32
scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression
drm/radeon: fix DP mode validation
drm/radeon/dp: add back special handling for NUTMEG
drm/amdgpu: fix DP mode validation
drm/amdgpu/dp: add back special handling for NUTMEG
KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
Revert KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
of: silence warnings due to max() usage
packet: on direct_xmit, limit tso and csum to supported devices
sctp: validate chunk len before actually using it
net sched filters: fix notification of filter delete with proper handle
udp: fix IP_CHECKSUM handling
net: sctp, forbid negative length
ipv4: use the right lock for ping_group_range
ipv4: disable BH in set_ping_group_range()
net: add recursion limit to GRO
rtnetlink: Add rtnexthop offload flag to compare mask
bridge: multicast: restore perm router ports on multicast enable
net: pktgen: remove rcu locking in pktgen_change_name()
ipv6: correctly add local routes when lo goes up
ip6_tunnel: fix ip6_tnl_lookup
ipv6: tcp: restore IP6CB for pktoptions skbs
netlink: do not enter direct reclaim from netlink_dump()
packet: call fanout_release, while UNREGISTERING a netdev
net: Add netdev all_adj_list refcnt propagation to fix panic
net/sched: act_vlan: Push skb->data to mac_header prior calling skb_vlan_*() functions
net: pktgen: fix pkt_size
net: fec: set mac address unconditionally
tg3: Avoid NULL pointer dereference in tg3_io_error_detected()
ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route
ip6_gre: fix flowi6_proto value in ip6gre_xmit_other()
tcp: fix a compile error in DBGUNDO()
tcp: fix wrong checksum calculation on MTU probing
net: avoid sk_forward_alloc overflows
tcp: fix overflow in __tcp_retransmit_skb()
arm64/kvm: fix build issue on kvm debug
arm64: ptdump: Indicate whether memory should be faulting
arm64: Add support for ARCH_SUPPORTS_DEBUG_PAGEALLOC
arm64: Drop alloc function from create_mapping
arm64: allow vmalloc regions to be set with set_memory_*
arm64: kernel: implement ACPI parking protocol
arm64: mm: create new fine-grained mappings at boot
arm64: ensure _stext and _etext are page-aligned
arm64: mm: allow passing a pgdir to alloc_init_*
arm64: mm: allocate pagetables anywhere
arm64: mm: use fixmap when creating page tables
arm64: mm: add functions to walk tables in fixmap
arm64: mm: add __{pud,pgd}_populate
arm64: mm: avoid redundant __pa(__va(x))
Linux 4.4.31
HID: usbhid: add ATEN CS962 to list of quirky devices
ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()
kvm: x86: Check memopp before dereference (CVE-2016-8630)
tty: vt, fix bogus division in csi_J
usb: dwc3: Fix size used in dma_free_coherent()
pwm: Unexport children before chip removal
UBI: fastmap: scrub PEB when bitflips are detected in a free PEB EC header
Disable "frame-address" warning
smc91x: avoid self-comparison warning
cgroup: avoid false positive gcc-6 warning
drm/exynos: fix error handling in exynos_drm_subdrv_open
mm/cma: silence warnings due to max() usage
ARM: 8584/1: floppy: avoid gcc-6 warning
powerpc/ptrace: Fix out of bounds array access warning
x86/xen: fix upper bound of pmd loop in xen_cleanhighmap()
perf build: Fix traceevent plugins build race
drm/dp/mst: Check peer device type before attempting EDID read
drm/radeon: drop register readback in cayman_cp_int_cntl_setup
drm/radeon/si_dpm: workaround for SI kickers
drm/radeon/si_dpm: Limit clocks on HD86xx part
Revert "drm/radeon: fix DP link training issue with second 4K monitor"
mmc: dw_mmc-pltfm: fix the potential NULL pointer dereference
scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware
scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded
scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices
mac80211: discard multicast and 4-addr A-MSDUs
firewire: net: fix fragmented datagram_size off-by-one
firewire: net: guard against rx buffer overflows
Input: i8042 - add XMG C504 to keyboard reset table
dm mirror: fix read error on recovery after default leg failure
virtio: console: Unlock vqs while freeing buffers
virtio_ring: Make interrupt suppression spec compliant
parisc: Ensure consistent state when switching to kernel stack at syscall entry
ovl: fsync after copy-up
KVM: MIPS: Make ERET handle ERL before EXL
KVM: x86: fix wbinvd_dirty_mask use-after-free
dm: free io_barrier after blk_cleanup_queue call
USB: serial: cp210x: fix tiocmget error handling
tty: limit terminal size to 4M chars
xhci: add restart quirk for Intel Wildcatpoint PCH
hv: do not lose pending heartbeat vmbus packets
vt: clear selection before resizing
Fix potential infoleak in older kernels
GenWQE: Fix bad page access during abort of resource allocation
usb: increase ohci watchdog delay to 275 msec
xhci: use default USB_RESUME_TIMEOUT when resuming ports.
USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7
USB: serial: fix potential NULL-dereference at probe
usb: gadget: function: u_ether: don't starve tx request queue
mei: txe: don't clean an unprocessed interrupt cause.
ubifs: Fix regression in ubifs_readdir()
ubifs: Abort readdir upon error
btrfs: fix races on root_log_ctx lists
ANDROID: binder: Clear binder and cookie when setting handle in flat binder struct
ANDROID: binder: Add strong ref checks
ALSA: hda - Fix headset mic detection problem for two Dell laptops
ALSA: hda - Adding a new group of pin cfg into ALC295 pin quirk table
ALSA: hda - allow 40 bit DMA mask for NVidia devices
ALSA: hda - Raise AZX_DCAPS_RIRB_DELAY handling into top drivers
ALSA: hda - Merge RIRB_PRE_DELAY into CTX_WORKAROUND caps
ALSA: usb-audio: Add quirk for Syntek STK1160
KEYS: Fix short sprintf buffer in /proc/keys show function
mm: memcontrol: do not recurse in direct reclaim
mm/list_lru.c: avoid error-path NULL pointer deref
libxfs: clean up _calc_dquots_per_chunk
h8300: fix syscall restarting
drm/dp/mst: Clear port->pdt when tearing down the i2c adapter
i2c: core: fix NULL pointer dereference under race condition
i2c: xgene: Avoid dma_buffer overrun
arm64:cpufeature ARM64_NCAPS is the indicator of last feature
arm64: hibernate: Refuse to hibernate if the boot cpu is offline
PM / sleep: Add support for read-only sysfs attributes
arm64: kernel: Add support for hibernate/suspend-to-disk
arm64: mm: add functions to walk page tables by PA
arm64: mm: move pte_* macros
PM / Hibernate: Call flush_icache_range() on pages restored in-place
arm64: Add new asm macro copy_page
arm64: Promote KERNEL_START/KERNEL_END definitions to a header file
arm64: kernel: Include _AC definition in page.h
arm64: Change cpu_resume() to enable mmu early then access sleep_sp by va
arm64: kernel: Rework finisher callback out of __cpu_suspend_enter()
arm64: Cleanup SCTLR flags
arm64: Fold proc-macros.S into assembler.h
arm/arm64: KVM: Add hook for C-based stage2 init
arm/arm64: KVM: Detect vGIC presence at runtime
arm64: KVM: Add support for 16-bit VMID
arm: KVM: Make kvm_arm.h friendly to assembly code
arm/arm64: KVM: Remove unreferenced S2_PGD_ORDER
arm64: KVM: debug: Remove spurious inline attributes
ARM: KVM: Cleanup exception injection
arm64: KVM: Remove weak attributes
arm64: KVM: Cleanup asm-offset.c
arm64: KVM: Turn system register numbers to an enum
arm64: KVM: VHE: Patch out use of HVC
arm64: Add ARM64_HAS_VIRT_HOST_EXTN feature
arm/arm64: Add new is_kernel_in_hyp_mode predicate
arm64: KVM: Move away from the assembly version of the world switch
arm64: KVM: Map the kernel RO section into HYP
arm64: KVM: Add compatibility aliases
arm64: KVM: Implement vgic-v3 save/restore
arm64: KVM: Add panic handling
arm64: KVM: HYP mode entry points
arm64: KVM: Implement TLB handling
arm64: KVM: Implement fpsimd save/restore
arm64: KVM: Implement the core world switch
arm64: KVM: Add patchable function selector
arm64: KVM: Implement guest entry
arm64: KVM: Implement debug save/restore
arm64: KVM: Implement 32bit system register save/restore
arm64: KVM: Implement system register save/restore
arm64: KVM: Implement timer save/restore
arm64: KVM: Implement vgic-v2 save/restore
arm64: KVM: Add a HYP-specific header file
KVM: arm/arm64: vgic-v3: Make the LR indexing macro public
arm64: Add macros to read/write system registers
Linux 4.4.30
Revert "fix minor infoleak in get_user_ex()"
Revert "x86/mm: Expand the exception table logic to allow new handling options"
Linux 4.4.29
ARM: pxa: pxa_cplds: fix interrupt handling
powerpc/nvram: Fix an incorrect partition merge
mpt3sas: Don't spam logs if logging level is 0
perf symbols: Fixup symbol sizes before picking best ones
perf symbols: Check symbol_conf.allow_aliases for kallsyms loading too
perf hists browser: Fix event group display
clk: divider: Fix clk_divider_round_rate() to use clk_readl()
clk: qoriq: fix a register offset error
s390/con3270: fix insufficient space padding
s390/con3270: fix use of uninitialised data
s390/cio: fix accidental interrupt enabling during resume
x86/mm: Expand the exception table logic to allow new handling options
dmaengine: ipu: remove bogus NO_IRQ reference
power: bq24257: Fix use of uninitialized pointer bq->charger
staging: r8188eu: Fix scheduling while atomic splat
ASoC: dapm: Fix kcontrol creation for output driver widget
ASoC: dapm: Fix value setting for _ENUM_DOUBLE MUX's second channel
ASoC: dapm: Fix possible uninitialized variable in snd_soc_dapm_get_volsw()
ASoC: topology: Fix error return code in soc_tplg_dapm_widget_create()
hwrng: omap - Only fail if pm_runtime_get_sync returns < 0
crypto: arm/ghash-ce - add missing async import/export
crypto: gcm - Fix IV buffer size in crypto_gcm_setkey
mwifiex: correct aid value during tdls setup
spi: spi-fsl-dspi: Drop extra spi_master_put in device remove function
ARM: clk-imx35: fix name for ckil clk
uio: fix dmem_region_start computation
genirq/generic_chip: Add irq_unmap callback
perf stat: Fix interval output values
powerpc/eeh: Null check uses of eeh_pe_bus_get
tunnels: Remove encapsulation offloads on decap.
tunnels: Don't apply GRO to multiple layers of encapsulation.
ipip: Properly mark ipip GRO packets as encapsulated.
posix_acl: Clear SGID bit when setting file permissions
brcmfmac: avoid potential stack overflow in brcmf_cfg80211_start_ap()
mm/hugetlb: fix memory offline with hugepage size > memory block size
drm/i915: Unalias obj->phys_handle and obj->userptr
drm/i915: Account for TSEG size when determining 865G stolen base
Revert "drm/i915: Check live status before reading edid"
drm/i915/gen9: fix the WaWmMemoryReadLatency implementation
xenbus: don't look up transaction IDs for ordinary writes
drm/vmwgfx: Limit the user-space command buffer size
drm/radeon: change vblank_time's calculation method to reduce computational error.
drm/radeon/si/dpm: fix phase shedding setup
drm/radeon: narrow asic_init for virtualization
drm/amdgpu: change vblank_time's calculation method to reduce computational error.
drm/amdgpu/dce11: add missing drm_mode_config_cleanup call
drm/amdgpu/dce11: disable hpd on local panels
drm/amdgpu/dce8: disable hpd on local panels
drm/amdgpu/dce10: disable hpd on local panels
drm/amdgpu: fix IB alignment for UVD
drm/prime: Pass the right module owner through to dma_buf_export()
Linux 4.4.28
target: Don't override EXTENDED_COPY xcopy_pt_cmd SCSI status code
target: Make EXTENDED_COPY 0xe4 failure return COPY TARGET DEVICE NOT REACHABLE
target: Re-add missing SCF_ACK_KREF assignment in v4.1.y
ubifs: Fix xattr_names length in exit paths
jbd2: fix incorrect unlock on j_list_lock
ext4: do not advertise encryption support when disabled
mmc: rtsx_usb_sdmmc: Handle runtime PM while changing the led
mmc: rtsx_usb_sdmmc: Avoid keeping the device runtime resumed when unused
mmc: core: Annotate cmd_hdr as __le32
powerpc/mm: Prevent unlikely crash in copro_calculate_slb()
ceph: fix error handling in ceph_read_iter
arm64: kernel: Init MDCR_EL2 even in the absence of a PMU
arm64: percpu: rewrite ll/sc loops in assembly
memstick: rtsx_usb_ms: Manage runtime PM when accessing the device
memstick: rtsx_usb_ms: Runtime resume the device when polling for cards
isofs: Do not return EACCES for unknown filesystems
irqchip/gic-v3-its: Fix entry size mask for GITS_BASER
s390/mm: fix gmap tlb flush issues
Using BUG_ON() as an assert() is _never_ acceptable
mm: filemap: fix mapping->nrpages double accounting in fuse
mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()
acpi, nfit: check for the correct event code in notifications
net/mlx4_core: Allow resetting VF admin mac to zero
bnx2x: Prevent false warning for lack of FC NPIV
PKCS#7: Don't require SpcSpOpusInfo in Authenticode pkcs7 signatures
hpsa: correct skipping masked peripherals
sd: Fix rw_max for devices that report an optimal xfer size
irqchip/gicv3: Handle loop timeout proper
kvm: x86: memset whole irq_eoi
x86/e820: Don't merge consecutive E820_PRAM ranges
blkcg: Unlock blkcg_pol_mutex only once when cpd == NULL
Fix regression which breaks DFS mounting
Cleanup missing frees on some ioctls
Do not send SMB3 SET_INFO request if nothing is changing
SMB3: GUIDs should be constructed as random but valid uuids
Set previous session id correctly on SMB3 reconnect
Display number of credits available
Clarify locking of cifs file and tcon structures and make more granular
fs/cifs: keep guid when assigning fid to fileinfo
cifs: Limit the overall credit acquired
fs/super.c: fix race between freeze_super() and thaw_super()
arc: don't leak bits of kernel stack into coredump
lightnvm: ensure that nvm_dev_ops can be used without CONFIG_NVM
ipc/sem.c: fix complex_count vs. simple op race
mm: filemap: don't plant shadow entries without radix tree node
metag: Only define atomic_dec_if_positive conditionally
scsi: Fix use-after-free
NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic
NFSv4: Open state recovery must account for file permission changes
NFSv4: nfs4_copy_delegation_stateid() must fail if the delegation is invalid
NFSv4: Don't report revoked delegations as valid in nfs_have_delegation()
sunrpc: fix write space race causing stalls
Input: elantech - add Fujitsu Lifebook E556 to force crc_enabled
Input: elantech - force needed quirks on Fujitsu H760
Input: i8042 - skip selftest on ASUS laptops
lib: add "on"/"off" support to kstrtobool
lib: update single-char callers of strtobool()
lib: move strtobool() to kstrtobool()
MIPS: ptrace: Fix regs_return_value for kernel context
MIPS: Fix -mabi=64 build of vdso.lds
ALSA: hda - Fix a failure of micmute led when having multi adcs
cx231xx: fix GPIOs for Pixelview SBTVD hybrid
cx231xx: don't return error on success
mb86a20s: fix demod settings
mb86a20s: fix the locking logic
ovl: copy_up_xattr(): use strnlen
ovl: Fix info leak in ovl_lookup_temp()
fbdev/efifb: Fix 16 color palette entry calculation
scsi: zfcp: spin_lock_irqsave() is not nestable
zfcp: trace full payload of all SAN records (req,resp,iels)
zfcp: fix payload trace length for SAN request&response
zfcp: fix D_ID field with actual value on tracing SAN responses
zfcp: restore tracing of handle for port and LUN with HBA records
zfcp: trace on request for open and close of WKA port
zfcp: restore: Dont use 0 to indicate invalid LUN in rec trace
zfcp: retain trace level for SCSI and HBA FSF response records
zfcp: close window with unblocked rport during rport gone
zfcp: fix ELS/GS request&response length for hardware data router
zfcp: fix fc_host port_type with NPIV
ubi: Deal with interrupted erasures in WL
powerpc/pseries: Fix stack corruption in htpe code
powerpc/64: Fix incorrect return value from __copy_tofrom_user
powerpc/powernv: Use CPU-endian PEST in pnv_pci_dump_p7ioc_diag_data()
powerpc/powernv: Use CPU-endian hub diag-data type in pnv_eeh_get_and_dump_hub_diag()
powerpc/powernv: Pass CPU-endian PE number to opal_pci_eeh_freeze_clear()
powerpc/vdso64: Use double word compare on pointers
dm crypt: fix crash on exit
dm mpath: check if path's request_queue is dying in activate_path()
dm: return correct error code in dm_resume()'s retry loop
dm: mark request_queue dead before destroying the DM device
perf intel-pt: Fix MTC timestamp calculation for large MTC periods
perf intel-pt: Fix estimated timestamps for cycle-accurate mode
perf intel-pt: Fix snapshot overlap detection decoder errors
pstore/ram: Use memcpy_fromio() to save old buffer
pstore/ram: Use memcpy_toio instead of memcpy
pstore/core: drop cmpxchg based updates
pstore/ramoops: fixup driver removal
parisc: Increase initial kernel mapping size
parisc: Fix kernel memory layout regarding position of __gp
parisc: Increase KERNEL_INITIAL_SIZE for 32-bit SMP kernels
cpufreq: intel_pstate: Fix unsafe HWP MSR access
platform: don't return 0 from platform_get_irq[_byname]() on error
PCI: Mark Atheros AR9580 to avoid bus reset
mmc: sdhci: cast unsigned int to unsigned long long to avoid unexpeted error
mmc: block: don't use CMD23 with very old MMC cards
rtlwifi: Fix missing country code for Great Britain
PM / devfreq: event: remove duplicate devfreq_event_get_drvdata()
clk: imx6: initialize GPU clocks
regulator: tps65910: Work around silicon erratum SWCZ010
mei: me: add kaby point device ids
gpio: mpc8xxx: Correct irq handler function
cgroup: Change from CAP_SYS_NICE to CAP_SYS_RESOURCE for cgroup migration permissions
UPSTREAM: cpu/hotplug: Handle unbalanced hotplug enable/disable
UPSTREAM: arm64: kaslr: fix breakage with CONFIG_MODVERSIONS=y
UPSTREAM: arm64: kaslr: keep modules close to the kernel when DYNAMIC_FTRACE=y
cgroup: Remove leftover instances of allow_attach
BACKPORT: lib: harden strncpy_from_user
CHROMIUM: cgroups: relax permissions on moving tasks between cgroups
CHROMIUM: remove Android's cgroup generic permissions checks
Linux 4.4.27
cfq: fix starvation of asynchronous writes
vfs: move permission checking into notify_change() for utimes(NULL)
dlm: free workqueues after the connections
crypto: vmx - Fix memory corruption caused by p8_ghash
crypto: ghash-generic - move common definitions to a new header file
ext4: release bh in make_indexed_dir
ext4: allow DAX writeback for hole punch
ext4: fix memory leak in ext4_insert_range()
ext4: reinforce check of i_dtime when clearing high fields of uid and gid
ext4: enforce online defrag restriction for encrypted files
scsi: ibmvfc: Fix I/O hang when port is not mapped
scsi: arcmsr: Simplify user_len checking
scsi: arcmsr: Buffer overflow in arcmsr_iop_message_xfer()
async_pq_val: fix DMA memory leak
reiserfs: switch to generic_{get,set,remove}xattr()
reiserfs: Unlock superblock before calling reiserfs_quota_on_mount()
ASoC: Intel: Atom: add a missing star in a memcpy call
brcmfmac: fix memory leak in brcmf_fill_bss_param
i40e: avoid NULL pointer dereference and recursive errors on early PCI error
fuse: fix killing s[ug]id in setattr
fuse: invalidate dir dentry after chmod
fuse: listxattr: verify xattr list
drivers: base: dma-mapping: page align the size when unmap_kernel_range
btrfs: assign error values to the correct bio structs
serial: 8250_dw: Check the data->pclk when get apb_pclk
arm64: Use PoU cache instr for I/D coherency
arm64: mm: add code to safely replace TTBR1_EL1
arm64: mm: place __cpu_setup in .text
arm64: add function to install the idmap
arm64: unmap idmap earlier
arm64: unify idmap removal
arm64: mm: place empty_zero_page in bss
arm64: head.S: use memset to clear BSS
arm64: mm: specialise pagetable allocators
arm64: mm: remove pointless PAGE_MASKing
asm-generic: Fix local variable shadow in __set_fixmap_offset
arm64: mm: fold alternatives into .init
ARM: 8511/1: ARM64: kernel: PSCI: move PSCI idle management code to drivers/firmware
ARM: 8481/2: drivers: psci: replace psci firmware calls
ARM: 8480/2: arm64: add implementation for arm-smccc
ARM: 8479/2: add implementation for arm-smccc
ARM: 8478/2: arm/arm64: add arm-smccc
ARM: 8510/1: rework ARM_CPU_SUSPEND dependencies
ARM: 8458/1: bL_switcher: add GIC dependency
Linux 4.4.26
mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
x86/build: Build compressed x86 kernels as PIE
arm64: Remove stack duplicating code from jprobes
arm64: kprobes: Add KASAN instrumentation around stack accesses
arm64: kprobes: Cleanup jprobe_return
arm64: kprobes: Fix overflow when saving stack
arm64: kprobes: WARN if attempting to step with PSTATE.D=1
kprobes: Add arm64 case in kprobe example module
arm64: Add kernel return probes support (kretprobes)
arm64: Add trampoline code for kretprobes
arm64: kprobes instruction simulation support
arm64: Treat all entry code as non-kprobe-able
arm64: Blacklist non-kprobe-able symbol
arm64: Kprobes with single stepping support
arm64: add conditional instruction simulation support
arm64: Add more test functions to insn.c
arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature
Linux 4.4.25
tpm_crb: fix crb_req_canceled behavior
tpm: fix a race condition in tpm2_unseal_trusted()
ima: use file_dentry()
ARM: cpuidle: Fix error return code
ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs
ARM: dts: mvebu: armada-390: add missing compatibility string and bracket
x86/dumpstack: Fix x86_32 kernel_stack_pointer() previous stack access
x86/irq: Prevent force migration of irqs which are not in the vector domain
x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation
KVM: PPC: BookE: Fix a sanity check
KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register
mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled
mfd: 88pm80x: Double shifting bug in suspend/resume
mfd: atmel-hlcdc: Do not sleep in atomic context
mfd: rtsx_usb: Avoid setting ucr->current_sg.status
ALSA: usb-line6: use the same declaration as definition in header for MIDI manufacturer ID
ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants
ALSA: ali5451: Fix out-of-bound position reporting
timekeeping: Fix __ktime_get_fast_ns() regression
time: Add cycles to nanoseconds translation
mm: Fix build for hardened usercopy
ANDROID: binder: Clear binder and cookie when setting handle in flat binder struct
ANDROID: binder: Add strong ref checks
UPSTREAM: staging/android/ion : fix a race condition in the ion driver
ANDROID: android-base: CONFIG_HARDENED_USERCOPY=y
UPSTREAM: fs/proc/kcore.c: Add bounce buffer for ktext data
UPSTREAM: fs/proc/kcore.c: Make bounce buffer global for read
BACKPORT: arm64: Correctly bounds check virt_addr_valid
Fix a build breakage in IO latency hist code.
UPSTREAM: efi: include asm/early_ioremap.h not asm/efi.h to get early_memremap
UPSTREAM: ia64: split off early_ioremap() declarations into asm/early_ioremap.h
FROMLIST: arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN
FROMLIST: arm64: xen: Enable user access before a privcmd hvc call
FROMLIST: arm64: Handle faults caused by inadvertent user access with PAN enabled
FROMLIST: arm64: Disable TTBR0_EL1 during normal kernel execution
FROMLIST: arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1
FROMLIST: arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro
FROMLIST: arm64: Factor out PAN enabling/disabling into separate uaccess_* macros
UPSTREAM: arm64: Handle el1 synchronous instruction aborts cleanly
UPSTREAM: arm64: include alternative handling in dcache_by_line_op
UPSTREAM: arm64: fix "dc cvau" cache operation on errata-affected core
UPSTREAM: Revert "arm64: alternatives: add enable parameter to conditional asm macros"
UPSTREAM: arm64: Add new asm macro copy_page
UPSTREAM: arm64: kill ESR_LNX_EXEC
UPSTREAM: arm64: add macro to extract ESR_ELx.EC
UPSTREAM: arm64: mm: mark fault_info table const
UPSTREAM: arm64: fix dump_instr when PAN and UAO are in use
BACKPORT: arm64: Fold proc-macros.S into assembler.h
UPSTREAM: arm64: choose memstart_addr based on minimum sparsemem section alignment
UPSTREAM: arm64/mm: ensure memstart_addr remains sufficiently aligned
UPSTREAM: arm64/kernel: fix incorrect EL0 check in inv_entry macro
UPSTREAM: arm64: Add macros to read/write system registers
UPSTREAM: arm64/efi: refactor EFI init and runtime code for reuse by 32-bit ARM
UPSTREAM: arm64/efi: split off EFI init and runtime code for reuse by 32-bit ARM
UPSTREAM: arm64/efi: mark UEFI reserved regions as MEMBLOCK_NOMAP
BACKPORT: arm64: only consider memblocks with NOMAP cleared for linear mapping
UPSTREAM: mm/memblock: add MEMBLOCK_NOMAP attribute to memblock memory table
ANDROID: dm: android-verity: Remove fec_header location constraint
BACKPORT: audit: consistently record PIDs with task_tgid_nr()
android-base.cfg: Enable kernel ASLR
UPSTREAM: vmlinux.lds.h: allow arch specific handling of ro_after_init data section
UPSTREAM: arm64: spinlock: fix spin_unlock_wait for LSE atomics
UPSTREAM: arm64: avoid TLB conflict with CONFIG_RANDOMIZE_BASE
UPSTREAM: arm64: Only select ARM64_MODULE_PLTS if MODULES=y
sched: Add Kconfig option DEFAULT_USE_ENERGY_AWARE to set ENERGY_AWARE feature flag
sched/fair: remove printk while schedule is in progress
ANDROID: fs: FS tracepoints to track IO.
sched/walt: Drop arch-specific timer access
ANDROID: fiq_debugger: Pass task parameter to unwind_frame()
eas/sched/fair: Fixing comments in find_best_target.
input: keyreset: switch to orderly_reboot
UPSTREAM: tun: fix transmit timestamp support
UPSTREAM: arch/arm/include/asm/pgtable-3level.h: add pmd_mkclean for THP
net: inet: diag: expose the socket mark to privileged processes.
net: diag: make udp_diag_destroy work for mapped addresses.
net: diag: support SOCK_DESTROY for UDP sockets
net: diag: allow socket bytecode filters to match socket marks
net: diag: slightly refactor the inet_diag_bc_audit error checks.
net: diag: Add support to filter on device index
UPSTREAM: brcmfmac: avoid potential stack overflow in brcmf_cfg80211_start_ap()
Linux 4.4.24
ALSA: hda - Add the top speaker pin config for HP Spectre x360
ALSA: hda - Fix headset mic detection problem for several Dell laptops
ACPICA: acpi_get_sleep_type_data: Reduce warnings
ALSA: hda - Adding one more ALC255 pin definition for headset problem
Revert "usbtmc: convert to devm_kzalloc"
USB: serial: cp210x: Add ID for a Juniper console
Staging: fbtft: Fix bug in fbtft-core
usb: misc: legousbtower: Fix NULL pointer deference
USB: serial: cp210x: fix hardware flow-control disable
dm log writes: fix bug with too large bios
clk: xgene: Add missing parenthesis when clearing divider value
aio: mark AIO pseudo-fs noexec
batman-adv: remove unused callback from batadv_algo_ops struct
IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV
IB/mlx4: Fix code indentation in QP1 MAD flow
IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV
IB/ipoib: Don't allow MC joins during light MC flush
IB/core: Fix use after free in send_leave function
IB/ipoib: Fix memory corruption in ipoib cm mode connect flow
KVM: nVMX: postpone VMCS changes on MSR_IA32_APICBASE write
dmaengine: at_xdmac: fix to pass correct device identity to free_irq()
kernel/fork: fix CLONE_CHILD_CLEARTID regression in nscd
ASoC: omap-mcpdm: Fix irq resource handling
sysctl: handle error writing UINT_MAX to u32 fields
powerpc/prom: Fix sub-processor option passed to ibm, client-architecture-support
brcmsmac: Initialize power in brcms_c_stf_ss_algo_channel_get()
brcmsmac: Free packet if dma_mapping_error() fails in dma_rxfill
brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain
ASoC: Intel: Skylake: Fix error return code in skl_probe()
pNFS/flexfiles: Fix layoutcommit after a commit to DS
pNFS/files: Fix layoutcommit after a commit to DS
NFS: Don't drop CB requests with invalid principals
svc: Avoid garbage replies when pc_func() returns rpc_drop_reply
dmaengine: at_xdmac: fix debug string
fnic: pci_dma_mapping_error() doesn't return an error code
avr32: off by one in at32_init_pio()
ath9k: Fix programming of minCCA power threshold
gspca: avoid unused variable warnings
em28xx-i2c: rt_mutex_trylock() returns zero on failure
NFC: fdp: Detect errors from fdp_nci_create_conn()
iwlmvm: mvm: set correct state in smart-fifo configuration
tile: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
pstore: drop file opened reference count
blk-mq: actually hook up defer list when running requests
hwrng: omap - Fix assumption that runtime_get_sync will always succeed
ARM: sa1111: fix pcmcia suspend/resume
ARM: shmobile: fix regulator quirk for Gen2
ARM: sa1100: clear reset status prior to reboot
ARM: sa1100: fix 3.6864MHz clock
ARM: sa1100: register clocks early
ARM: sun5i: Fix typo in trip point temperature
regulator: qcom_smd: Fix voltage ranges for pm8x41
regulator: qcom_spmi: Update mvs1/mvs2 switches on pm8941
regulator: qcom_spmi: Add support for get_mode/set_mode on switches
regulator: qcom_spmi: Add support for S4 supply on pm8941
tpm: fix byte-order for the value read by tpm2_get_tpm_pt
printk: fix parsing of "brl=" option
MIPS: uprobes: fix use of uninitialised variable
MIPS: Malta: Fix IOCU disable switch read for MIPS64
MIPS: fix uretprobe implementation
MIPS: uprobes: remove incorrect set_orig_insn
arm64: debug: avoid resetting stepping state machine when TIF_SINGLESTEP
ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7
irqchip/gicv3: Silence noisy DEBUG_PER_CPU_MAPS warning
gpio: sa1100: fix irq probing for ucb1x00
usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame()
ceph: fix race during filling readdir cache
iwlwifi: mvm: don't use ret when not initialised
iwlwifi: pcie: fix access to scratch buffer
spi: sh-msiof: Avoid invalid clock generator parameters
hwmon: (adt7411) set bit 3 in CFG1 register
nvmem: Declare nvmem_cell_read() consistently
ipvs: fix bind to link-local mcast IPv6 address in backup
tools/vm/slabinfo: fix an unintentional printf
mmc: pxamci: fix potential oops
drivers/perf: arm_pmu: Fix leak in error path
pinctrl: Flag strict is a field in struct pinmux_ops
pinctrl: uniphier: fix .pin_dbg_show() callback
i40e: avoid null pointer dereference
perf/core: Fix pmu::filter_match for SW-led groups
iwlwifi: mvm: fix a few firmware capability checks
usb: musb: fix DMA for host mode
usb: musb: Fix DMA desired mode for Mentor DMA engine
ARM: 8617/1: dma: fix dma_max_pfn()
ARM: 8616/1: dt: Respect property size when parsing CPUs
drm/radeon/si/dpm: add workaround for for Jet parts
drm/nouveau/fifo/nv04: avoid ramht race against cookie insertion
x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID
x86/init: Fix cr4_init_shadow() on CR4-less machines
can: dev: fix deadlock reported after bus-off
mm,ksm: fix endless looping in allocating memory when ksm enable
mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctl
cpuset: handle race between CPU hotplug and cpuset_hotplug_work
usercopy: fold builtin_const check into inline function
Linux 4.4.23
hostfs: Freeing an ERR_PTR in hostfs_fill_sb_common()
qxl: check for kmap failures
power: supply: max17042_battery: fix model download bug.
power_supply: tps65217-charger: fix missing platform_set_drvdata()
PM / hibernate: Fix rtree_next_node() to avoid walking off list ends
PM / hibernate: Restore processor state before using per-CPU variables
MIPS: paravirt: Fix undefined reference to smp_bootstrap
MIPS: Add a missing ".set pop" in an early commit
MIPS: Avoid a BUG warning during prctl(PR_SET_FP_MODE, ...)
MIPS: Remove compact branch policy Kconfig entries
MIPS: vDSO: Fix Malta EVA mapping to vDSO page structs
MIPS: SMP: Fix possibility of deadlock when bringing CPUs online
MIPS: Fix pre-r6 emulation FPU initialisation
i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended
i2c-eg20t: fix race between i2c init and interrupt enable
btrfs: ensure that file descriptor used with subvol ioctls is a dir
nl80211: validate number of probe response CSA counters
can: flexcan: fix resume function
mm: delete unnecessary and unsafe init_tlb_ubc()
tracing: Move mutex to protect against resetting of seq data
fix memory leaks in tracing_buffers_splice_read()
power: reset: hisi-reboot: Unmap region obtained by of_iomap
mtd: pmcmsp-flash: Allocating too much in init_msp_flash()
mtd: maps: sa1100-flash: potential NULL dereference
fix fault_in_multipages_...() on architectures with no-op access_ok()
fanotify: fix list corruption in fanotify_get_response()
fsnotify: add a way to stop queueing events on group shutdown
xfs: prevent dropping ioend completions during buftarg wait
autofs: use dentry flags to block walks during expire
autofs races
pwm: Mark all devices as "might sleep"
bridge: re-introduce 'fix parsing of MLDv2 reports'
net: smc91x: fix SMC accesses
Revert "phy: IRQ cannot be shared"
net: dsa: bcm_sf2: Fix race condition while unmasking interrupts
net/mlx5: Added missing check of msg length in verifying its signature
tipc: fix NULL pointer dereference in shutdown()
net/irda: handle iriap_register_lsap() allocation failure
vti: flush x-netns xfrm cache when vti interface is removed
af_unix: split 'u->readlock' into two: 'iolock' and 'bindlock'
Revert "af_unix: Fix splice-bind deadlock"
bonding: Fix bonding crash
megaraid: fix null pointer check in megasas_detach_one().
nouveau: fix nv40_perfctr_next() cleanup regression
Staging: iio: adc: fix indent on break statement
iwlegacy: avoid warning about missing braces
ath9k: fix misleading indentation
am437x-vfpe: fix typo in vpfe_get_app_input_index
Add braces to avoid "ambiguous ‘else’" compiler warnings
net: caif: fix misleading indentation
Makefile: Mute warning for __builtin_return_address(>0) for tracing only
Disable "frame-address" warning
Disable "maybe-uninitialized" warning globally
gcov: disable -Wmaybe-uninitialized warning
Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES
kbuild: forbid kernel directory to contain spaces and colons
tools: Support relative directory path for 'O='
Makefile: revert "Makefile: Document ability to make file.lst and file.S" partially
kbuild: Do not run modules_install and install in paralel
ocfs2: fix start offset to ocfs2_zero_range_for_truncate()
ocfs2/dlm: fix race between convert and migration
crypto: echainiv - Replace chaining with multiplication
crypto: skcipher - Fix blkcipher walk OOM crash
crypto: arm/aes-ctr - fix NULL dereference in tail processing
crypto: arm64/aes-ctr - fix NULL dereference in tail processing
tcp: properly scale window in tcp_v[46]_reqsk_send_ack()
tcp: fix use after free in tcp_xmit_retransmit_queue()
tcp: cwnd does not increase in TCP YeAH
ipv6: release dst in ping_v6_sendmsg
ipv4: panic in leaf_walk_rcu due to stale node pointer
reiserfs: fix "new_insert_key may be used uninitialized ..."
Fix build warning in kernel/cpuset.c
include/linux/kernel.h: change abs() macro so it uses consistent return type
Linux 4.4.22
openrisc: fix the fix of copy_from_user()
avr32: fix 'undefined reference to `___copy_from_user'
ia64: copy_from_user() should zero the destination on access_ok() failure
genirq/msi: Fix broken debug output
ppc32: fix copy_from_user()
sparc32: fix copy_from_user()
mn10300: copy_from_user() should zero on access_ok() failure...
nios2: copy_from_user() should zero the tail of destination
openrisc: fix copy_from_user()
parisc: fix copy_from_user()
metag: copy_from_user() should zero the destination on access_ok() failure
alpha: fix copy_from_user()
asm-generic: make copy_from_user() zero the destination properly
mips: copy_from_user() must zero the destination on access_ok() failure
hexagon: fix strncpy_from_user() error return
sh: fix copy_from_user()
score: fix copy_from_user() and friends
blackfin: fix copy_from_user()
cris: buggered copy_from_user/copy_to_user/clear_user
frv: fix clear_user()
asm-generic: make get_user() clear the destination on errors
ARC: uaccess: get_user to zero out dest in cause of fault
s390: get_user() should zero on failure
score: fix __get_user/get_user
nios2: fix __get_user()
sh64: failing __get_user() should zero
m32r: fix __get_user()
mn10300: failing __get_user() and get_user() should zero
fix minor infoleak in get_user_ex()
microblaze: fix copy_from_user()
avr32: fix copy_from_user()
microblaze: fix __get_user()
fix iov_iter_fault_in_readable()
irqchip/atmel-aic: Fix potential deadlock in ->xlate()
genirq: Provide irq_gc_{lock_irqsave,unlock_irqrestore}() helpers
drm: Only use compat ioctl for addfb2 on X86/IA64
drm: atmel-hlcdc: Fix vertical scaling
net: simplify napi_synchronize() to avoid warnings
kconfig: tinyconfig: provide whole choice blocks to avoid warnings
soc: qcom/spm: shut up uninitialized variable warning
pinctrl: at91-pio4: use %pr format string for resource
mmc: dw_mmc: use resource_size_t to store physical address
drm/i915: Avoid pointer arithmetic in calculating plane surface offset
mpssd: fix buffer overflow warning
gma500: remove annoying deprecation warning
ipv6: addrconf: fix dev refcont leak when DAD failed
sched/core: Fix a race between try_to_wake_up() and a woken up task
Revert "wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel"
ath9k: fix using sta->drv_priv before initializing it
md-cluster: make md-cluster also can work when compiled into kernel
xhci: fix null pointer dereference in stop command timeout function
fuse: direct-io: don't dirty ITER_BVEC pages
Btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returns
crypto: cryptd - initialize child shash_desc on import
arm64: spinlocks: implement smp_mb__before_spinlock() as smp_mb()
pinctrl: sunxi: fix uart1 CTS/RTS pins at PG on A23/A33
pinctrl: pistachio: fix mfio pll_lock pinmux
dm crypt: fix error with too large bios
dm log writes: move IO accounting earlier to fix error path
dm log writes: fix check of kthread_run() return value
bus: arm-ccn: Fix XP watchpoint settings bitmask
bus: arm-ccn: Do not attempt to configure XPs for cycle counter
bus: arm-ccn: Fix PMU handling of MN
ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI
ARM: dts: overo: fix gpmc nand on boards with ethernet
ARM: dts: overo: fix gpmc nand cs0 range
ARM: dts: imx6qdl: Fix SPDIF regression
ARM: OMAP3: hwmod data: Add sysc information for DSI
ARM: kirkwood: ib62x0: fix size of u-boot environment partition
ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx
ARM: imx6: add missing BM_CLPCR_BYP_MMDC_CH0_LPM_HS setting for imx6ul
ARM: AM43XX: hwmod: Fix RSTST register offset for pruss
cpuset: make sure new tasks conform to the current config of the cpuset
net: thunderx: Fix OOPs with ethtool --register-dump
USB: change bInterval default to 10 ms
ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)
usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase
usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition
USB: serial: simple: add support for another Infineon flashloader
serial: 8250: added acces i/o products quad and octal serial cards
serial: 8250_mid: fix divide error bug if baud rate is 0
iio: ensure ret is initialized to zero before entering do loop
iio:core: fix IIO_VAL_FRACTIONAL sign handling
iio: accel: kxsd9: Fix scaling bug
iio: fix pressure data output unit in hid-sensor-attributes
iio: accel: bmc150: reset chip at init time
iio: adc: at91: unbreak channel adc channel 3
iio: ad799x: Fix buffered capture for ad7991/ad7995/ad7999
iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample
iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access
iio: adc: rockchip_saradc: reset saradc controller before programming it
iio: proximity: as3935: set up buffer timestamps for non-zero values
iio: accel: kxsd9: Fix raw read return
kvm-arm: Unmap shadow pagetables properly
x86/AMD: Apply erratum 665 on machines without a BIOS fix
x86/paravirt: Do not trace _paravirt_ident_*() functions
ARC: mm: fix build breakage with STRICT_MM_TYPECHECKS
IB/uverbs: Fix race between uverbs_close and remove_one
dm flakey: fix reads to be issued if drop_writes configured
audit: fix exe_file access in audit_exe_compare
mm: introduce get_task_exe_file
kexec: fix double-free when failing to relocate the purgatory
NFSv4.1: Fix the CREATE_SESSION slot number accounting
pNFS: Ensure LAYOUTGET and LAYOUTRETURN are properly serialised
nfsd: Close race between nfsd4_release_lockowner and nfsd4_lock
NFSv4.x: Fix a refcount leak in nfs_callback_up_net
pNFS: The client must not do I/O to the DS if it's lease has expired
kernfs: don't depend on d_find_any_alias() when generating notifications
powerpc/mm: Don't alias user region to other regions below PAGE_OFFSET
powerpc/powernv : Drop reference added by kset_find_obj()
powerpc/tm: do not use r13 for tabort_syscall
tipc: move linearization of buffers to generic code
lightnvm: put bio before return
fscrypto: require write access to mount to set encryption policy
Revert "KVM: x86: fix missed hardware breakpoints"
MIPS: KVM: Check for pfn noslot case
clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function
fscrypto: add authorization check for setting encryption policy
ext4: use __GFP_NOFAIL in ext4_free_blocks()
Conflicts:
arch/arm/kernel/devtree.c
arch/arm64/Kconfig
arch/arm64/kernel/arm64ksyms.c
arch/arm64/kernel/psci.c
arch/arm64/mm/fault.c
drivers/android/binder.c
drivers/usb/host/xhci-hub.c
fs/ext4/readpage.c
include/linux/mmc/core.h
include/linux/mmzone.h
mm/memcontrol.c
net/core/filter.c
net/netlink/af_netlink.c
net/netlink/af_netlink.h
Change-Id: I99fe7a0914e83e284b11b33185b71448a8999d1f
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
1618 lines
49 KiB
Text
1618 lines
49 KiB
Text
#
|
|
# Multifunction miscellaneous devices
|
|
#
|
|
|
|
if HAS_IOMEM
|
|
menu "Multifunction device drivers"
|
|
|
|
config MFD_CORE
|
|
tristate
|
|
select IRQ_DOMAIN
|
|
default n
|
|
|
|
config MFD_CS5535
|
|
tristate "AMD CS5535 and CS5536 southbridge core functions"
|
|
select MFD_CORE
|
|
depends on PCI && (X86_32 || (X86 && COMPILE_TEST))
|
|
---help---
|
|
This is the core driver for CS5535/CS5536 MFD functions. This is
|
|
necessary for using the board's GPIO and MFGPT functionality.
|
|
|
|
config MFD_AS3711
|
|
bool "AMS AS3711"
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
depends on I2C=y
|
|
help
|
|
Support for the AS3711 PMIC from AMS
|
|
|
|
config MFD_AS3722
|
|
bool "ams AS3722 Power Management IC"
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
depends on I2C=y && OF
|
|
help
|
|
The ams AS3722 is a compact system PMU suitable for mobile phones,
|
|
tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
|
|
controllers, 11 LDOs, RTC, automatic battery, temperature and
|
|
over current monitoring, GPIOs, ADC and a watchdog.
|
|
|
|
config PMIC_ADP5520
|
|
bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
|
|
depends on I2C=y
|
|
help
|
|
Say yes here to add support for Analog Devices AD5520 and ADP5501,
|
|
Multifunction Power Management IC. This includes
|
|
the I2C driver and the core APIs _only_, you have to select
|
|
individual components like LCD backlight, LEDs, GPIOs and Kepad
|
|
under the corresponding menus.
|
|
|
|
config MFD_AAT2870_CORE
|
|
bool "AnalogicTech AAT2870"
|
|
select MFD_CORE
|
|
depends on I2C=y
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
If you say yes here you get support for the AAT2870.
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the
|
|
functionality of the device.
|
|
|
|
config MFD_ATMEL_FLEXCOM
|
|
tristate "Atmel Flexcom (Flexible Serial Communication Unit)"
|
|
select MFD_CORE
|
|
depends on OF
|
|
help
|
|
Select this to get support for Atmel Flexcom. This is a wrapper
|
|
which embeds a SPI controller, a I2C controller and a USART. Only
|
|
one function can be used at a time. The choice is done at boot time
|
|
by the probe function of this MFD driver according to a device tree
|
|
property.
|
|
|
|
config MFD_ATMEL_HLCDC
|
|
tristate "Atmel HLCDC (High-end LCD Controller)"
|
|
select MFD_CORE
|
|
select REGMAP_MMIO
|
|
depends on OF
|
|
help
|
|
If you say yes here you get support for the HLCDC block.
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the
|
|
functionality of the device.
|
|
|
|
config MFD_BCM590XX
|
|
tristate "Broadcom BCM590xx PMUs"
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
depends on I2C
|
|
help
|
|
Support for the BCM590xx PMUs from Broadcom
|
|
|
|
config MFD_AXP20X
|
|
bool "X-Powers AXP20X"
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
depends on I2C=y
|
|
help
|
|
If you say Y here you get support for the X-Powers AXP202, AXP209 and
|
|
AXP288 power management IC (PMIC).
|
|
This driver include only the core APIs. You have to select individual
|
|
components like regulators or the PEK (Power Enable Key) under the
|
|
corresponding menus.
|
|
|
|
config MFD_CROS_EC
|
|
tristate "ChromeOS Embedded Controller"
|
|
select MFD_CORE
|
|
select CHROME_PLATFORMS
|
|
select CROS_EC_PROTO
|
|
depends on X86 || ARM || COMPILE_TEST
|
|
help
|
|
If you say Y here you get support for the ChromeOS Embedded
|
|
Controller (EC) providing keyboard, battery and power services.
|
|
You also need to enable the driver for the bus you are using. The
|
|
protocol for talking to the EC is defined by the bus driver.
|
|
|
|
config MFD_CROS_EC_I2C
|
|
tristate "ChromeOS Embedded Controller (I2C)"
|
|
depends on MFD_CROS_EC && I2C
|
|
|
|
help
|
|
If you say Y here, you get support for talking to the ChromeOS
|
|
EC through an I2C bus. This uses a simple byte-level protocol with
|
|
a checksum. Failing accesses will be retried three times to
|
|
improve reliability.
|
|
|
|
config MFD_CROS_EC_SPI
|
|
tristate "ChromeOS Embedded Controller (SPI)"
|
|
depends on MFD_CROS_EC && SPI
|
|
|
|
---help---
|
|
If you say Y here, you get support for talking to the ChromeOS EC
|
|
through a SPI bus, using a byte-level protocol. Since the EC's
|
|
response time cannot be guaranteed, we support ignoring
|
|
'pre-amble' bytes before the response actually starts.
|
|
|
|
config MFD_ASIC3
|
|
bool "Compaq ASIC3"
|
|
depends on GPIOLIB && ARM
|
|
select MFD_CORE
|
|
---help---
|
|
This driver supports the ASIC3 multifunction chip found on many
|
|
PDAs (mainly iPAQ and HTC based ones)
|
|
|
|
config PMIC_DA903X
|
|
bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
|
|
depends on I2C=y
|
|
help
|
|
Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
|
|
ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
|
|
usually found on PXA processors-based platforms. This includes
|
|
the I2C driver and the core APIs _only_, you have to select
|
|
individual components like LCD backlight, voltage regulators,
|
|
LEDs and battery-charger under the corresponding menus.
|
|
|
|
config PMIC_DA9052
|
|
bool
|
|
select MFD_CORE
|
|
|
|
config MFD_DA9052_SPI
|
|
bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI"
|
|
select REGMAP_SPI
|
|
select REGMAP_IRQ
|
|
select PMIC_DA9052
|
|
depends on SPI_MASTER=y
|
|
help
|
|
Support for the Dialog Semiconductor DA9052 PMIC
|
|
when controlled using SPI. This driver provides common support
|
|
for accessing the device, additional drivers must be enabled in
|
|
order to use the functionality of the device.
|
|
|
|
config MFD_DA9052_I2C
|
|
bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C"
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
select PMIC_DA9052
|
|
depends on I2C=y
|
|
help
|
|
Support for the Dialog Semiconductor DA9052 PMIC
|
|
when controlled using I2C. This driver provides common support
|
|
for accessing the device, additional drivers must be enabled in
|
|
order to use the functionality of the device.
|
|
|
|
config MFD_DA9055
|
|
bool "Dialog Semiconductor DA9055 PMIC Support"
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
select MFD_CORE
|
|
depends on I2C=y
|
|
help
|
|
Say yes here for support of Dialog Semiconductor DA9055. This is
|
|
a Power Management IC. This driver provides common support for
|
|
accessing the device as well as the I2C interface to the chip itself.
|
|
Additional drivers must be enabled in order to use the functionality
|
|
of the device.
|
|
|
|
This driver can be built as a module. If built as a module it will be
|
|
called "da9055"
|
|
|
|
config MFD_DA9062
|
|
tristate "Dialog Semiconductor DA9062 PMIC Support"
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
depends on I2C=y
|
|
help
|
|
Say yes here for support for the Dialog Semiconductor DA9062 PMIC.
|
|
This includes the I2C driver and core APIs.
|
|
Additional drivers must be enabled in order to use the functionality
|
|
of the device.
|
|
|
|
config MFD_DA9063
|
|
bool "Dialog Semiconductor DA9063 PMIC Support"
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
depends on I2C=y
|
|
help
|
|
Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
|
|
This includes the I2C driver and core APIs.
|
|
Additional drivers must be enabled in order to use the functionality
|
|
of the device.
|
|
|
|
config MFD_DA9150
|
|
tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
help
|
|
This adds support for the DA9150 integrated charger and fuel-gauge
|
|
chip. This driver provides common support for accessing the device.
|
|
Additional drivers must be enabled in order to use the specific
|
|
features of the device.
|
|
|
|
config MFD_DLN2
|
|
tristate "Diolan DLN2 support"
|
|
select MFD_CORE
|
|
depends on USB
|
|
help
|
|
This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter
|
|
DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2,
|
|
etc. must be enabled in order to use the functionality of
|
|
the device.
|
|
|
|
config MFD_MC13XXX
|
|
tristate
|
|
depends on (SPI_MASTER || I2C)
|
|
select MFD_CORE
|
|
select REGMAP_IRQ
|
|
help
|
|
Enable support for the Freescale MC13783 and MC13892 PMICs.
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the
|
|
functionality of the device.
|
|
|
|
config MFD_MC13XXX_SPI
|
|
tristate "Freescale MC13783 and MC13892 SPI interface"
|
|
depends on SPI_MASTER
|
|
select REGMAP_SPI
|
|
select MFD_MC13XXX
|
|
help
|
|
Select this if your MC13xxx is connected via an SPI bus.
|
|
|
|
config MFD_MC13XXX_I2C
|
|
tristate "Freescale MC13892 I2C interface"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
select MFD_MC13XXX
|
|
help
|
|
Select this if your MC13xxx is connected via an I2C bus.
|
|
|
|
config MFD_HI6421_PMIC
|
|
tristate "HiSilicon Hi6421 PMU/Codec IC"
|
|
depends on OF
|
|
select MFD_CORE
|
|
select REGMAP_MMIO
|
|
help
|
|
Add support for HiSilicon Hi6421 PMIC. Hi6421 includes multi-
|
|
functions, such as regulators, RTC, codec, Coulomb counter, etc.
|
|
This driver includes core APIs _only_. You have to select
|
|
individul components like voltage regulators under corresponding
|
|
menus in order to enable them.
|
|
We communicate with the Hi6421 via memory-mapped I/O.
|
|
|
|
config HTC_EGPIO
|
|
bool "HTC EGPIO support"
|
|
depends on GPIOLIB && ARM
|
|
help
|
|
This driver supports the CPLD egpio chip present on
|
|
several HTC phones. It provides basic support for input
|
|
pins, output pins, and irqs.
|
|
|
|
config HTC_PASIC3
|
|
tristate "HTC PASIC3 LED/DS1WM chip support"
|
|
select MFD_CORE
|
|
help
|
|
This core driver provides register access for the LED/DS1WM
|
|
chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
|
|
HTC Magician devices, respectively. Actual functionality is
|
|
handled by the leds-pasic3 and ds1wm drivers.
|
|
|
|
config HTC_I2CPLD
|
|
bool "HTC I2C PLD chip support"
|
|
depends on I2C=y && GPIOLIB
|
|
help
|
|
If you say yes here you get support for the supposed CPLD
|
|
found on omap850 HTC devices like the HTC Wizard and HTC Herald.
|
|
This device provides input and output GPIOs through an I2C
|
|
interface to one or more sub-chips.
|
|
|
|
config MFD_INTEL_QUARK_I2C_GPIO
|
|
tristate "Intel Quark MFD I2C GPIO"
|
|
depends on PCI
|
|
depends on X86
|
|
depends on COMMON_CLK
|
|
select MFD_CORE
|
|
help
|
|
This MFD provides support for I2C and GPIO that exist only
|
|
in a single PCI device. It splits the 2 IO devices to
|
|
their respective IO driver.
|
|
The GPIO exports a total amount of 8 interrupt-capable GPIOs.
|
|
|
|
config LPC_ICH
|
|
tristate "Intel ICH LPC"
|
|
depends on PCI
|
|
select MFD_CORE
|
|
help
|
|
The LPC bridge function of the Intel ICH provides support for
|
|
many functional units. This driver provides needed support for
|
|
other drivers to control these functions, currently GPIO and
|
|
watchdog.
|
|
|
|
config LPC_SCH
|
|
tristate "Intel SCH LPC"
|
|
depends on PCI
|
|
select MFD_CORE
|
|
help
|
|
LPC bridge function of the Intel SCH provides support for
|
|
System Management Bus and General Purpose I/O.
|
|
|
|
config INTEL_SOC_PMIC
|
|
bool "Support for Intel Atom SoC PMIC"
|
|
depends on GPIOLIB
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
help
|
|
Select this option to enable support for the PMIC device
|
|
on some Intel SoC systems. The PMIC provides ADC, GPIO,
|
|
thermal, charger and related power management functions
|
|
on these systems.
|
|
|
|
config MFD_INTEL_LPSS
|
|
tristate
|
|
select COMMON_CLK
|
|
select MFD_CORE
|
|
|
|
config MFD_INTEL_LPSS_ACPI
|
|
tristate "Intel Low Power Subsystem support in ACPI mode"
|
|
select MFD_INTEL_LPSS
|
|
depends on X86 && ACPI
|
|
help
|
|
This driver supports Intel Low Power Subsystem (LPSS) devices such as
|
|
I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake
|
|
PCH) in ACPI mode.
|
|
|
|
config MFD_INTEL_LPSS_PCI
|
|
tristate "Intel Low Power Subsystem support in PCI mode"
|
|
select MFD_INTEL_LPSS
|
|
depends on X86 && PCI
|
|
help
|
|
This driver supports Intel Low Power Subsystem (LPSS) devices such as
|
|
I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake
|
|
PCH) in PCI mode.
|
|
|
|
config MFD_INTEL_MSIC
|
|
bool "Intel MSIC"
|
|
depends on INTEL_SCU_IPC
|
|
select MFD_CORE
|
|
help
|
|
Select this option to enable access to Intel MSIC (Avatele
|
|
Passage) chip. This chip embeds audio, battery, GPIO, etc.
|
|
devices used in Intel Medfield platforms.
|
|
|
|
config MFD_IPAQ_MICRO
|
|
bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
|
|
depends on SA1100_H3100 || SA1100_H3600
|
|
select MFD_CORE
|
|
help
|
|
Select this to get support for the Microcontroller found in
|
|
the Compaq iPAQ handheld computers. This is an Atmel
|
|
AT90LS8535 microcontroller flashed with a special iPAQ
|
|
firmware using the custom protocol implemented in this driver.
|
|
|
|
config MFD_JANZ_CMODIO
|
|
tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
|
|
select MFD_CORE
|
|
depends on PCI
|
|
help
|
|
This is the core driver for the Janz CMOD-IO PCI MODULbus
|
|
carrier board. This device is a PCI to MODULbus bridge which may
|
|
host many different types of MODULbus daughterboards, including
|
|
CAN and GPIO controllers.
|
|
|
|
config MFD_JZ4740_ADC
|
|
bool "Janz JZ4740 ADC core"
|
|
select MFD_CORE
|
|
select GENERIC_IRQ_CHIP
|
|
depends on MACH_JZ4740
|
|
help
|
|
Say yes here if you want support for the ADC unit in the JZ4740 SoC.
|
|
This driver is necessary for jz4740-battery and jz4740-hwmon driver.
|
|
|
|
config MFD_KEMPLD
|
|
tristate "Kontron module PLD device"
|
|
select MFD_CORE
|
|
help
|
|
This is the core driver for the PLD (Programmable Logic Device) found
|
|
on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD
|
|
device may provide functions like watchdog, GPIO, UART and I2C bus.
|
|
|
|
The following modules are supported:
|
|
* COMe-bBL6
|
|
* COMe-bHL6
|
|
* COMe-bIP#
|
|
* COMe-bPC2 (ETXexpress-PC)
|
|
* COMe-bSC# (ETXexpress-SC T#)
|
|
* COMe-cBL6
|
|
* COMe-cBT6
|
|
* COMe-cBW6
|
|
* COMe-cCT6
|
|
* COMe-cDC2 (microETXexpress-DC)
|
|
* COMe-cHL6
|
|
* COMe-cPC2 (microETXexpress-PC)
|
|
* COMe-mBT10
|
|
* COMe-mCT10
|
|
* COMe-mTT10 (nanoETXexpress-TT)
|
|
* ETX-OH
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called kempld-core.
|
|
|
|
config MFD_88PM800
|
|
tristate "Marvell 88PM800"
|
|
depends on I2C=y
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
select MFD_CORE
|
|
help
|
|
This supports for Marvell 88PM800 Power Management IC.
|
|
This includes the I2C driver and the core APIs _only_, you have to
|
|
select individual components like voltage regulators, RTC and
|
|
battery-charger under the corresponding menus.
|
|
|
|
config MFD_88PM805
|
|
tristate "Marvell 88PM805"
|
|
depends on I2C=y
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
select MFD_CORE
|
|
help
|
|
This supports for Marvell 88PM805 Power Management IC. This includes
|
|
the I2C driver and the core APIs _only_, you have to select individual
|
|
components like codec device, headset/Mic device under the
|
|
corresponding menus.
|
|
|
|
config MFD_88PM860X
|
|
bool "Marvell 88PM8606/88PM8607"
|
|
depends on I2C=y
|
|
select REGMAP_I2C
|
|
select MFD_CORE
|
|
help
|
|
This supports for Marvell 88PM8606/88PM8607 Power Management IC.
|
|
This includes the I2C driver and the core APIs _only_, you have to
|
|
select individual components like voltage regulators, RTC and
|
|
battery-charger under the corresponding menus.
|
|
|
|
config MFD_MAX14577
|
|
bool "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
select IRQ_DOMAIN
|
|
help
|
|
Say yes here to add support for Maxim Semiconductor MAX14577 and
|
|
MAX77836 Micro-USB ICs with battery charger.
|
|
This driver provides common support for accessing the device;
|
|
additional drivers must be enabled in order to use the functionality
|
|
of the device.
|
|
|
|
config MFD_MAX77686
|
|
bool "Maxim Semiconductor MAX77686/802 PMIC Support"
|
|
depends on I2C=y
|
|
depends on OF
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
select IRQ_DOMAIN
|
|
help
|
|
Say yes here to add support for Maxim Semiconductor MAX77686 and
|
|
MAX77802 which are Power Management IC with an RTC on chip.
|
|
This driver provides common support for accessing the device;
|
|
additional drivers must be enabled in order to use the functionality
|
|
of the device.
|
|
|
|
config MFD_MAX77693
|
|
bool "Maxim Semiconductor MAX77693 PMIC Support"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
help
|
|
Say yes here to add support for Maxim Semiconductor MAX77693.
|
|
This is a companion Power Management IC with Flash, Haptic, Charger,
|
|
and MUIC(Micro USB Interface Controller) controls on chip.
|
|
This driver provides common support for accessing the device;
|
|
additional drivers must be enabled in order to use the functionality
|
|
of the device.
|
|
|
|
config MFD_MAX77843
|
|
bool "Maxim Semiconductor MAX77843 PMIC Support"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
help
|
|
Say yes here to add support for Maxim Semiconductor MAX77843.
|
|
This is companion Power Management IC with LEDs, Haptic, Charger,
|
|
Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
|
|
This driver provides common support for accessing the device;
|
|
additional drivers must be enabled in order to use the functionality
|
|
of the device.
|
|
|
|
config MFD_MAX8907
|
|
tristate "Maxim Semiconductor MAX8907 PMIC Support"
|
|
select MFD_CORE
|
|
depends on I2C=y
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
help
|
|
Say yes here to add support for Maxim Semiconductor MAX8907. This is
|
|
a Power Management IC. This driver provides common support for
|
|
accessing the device; additional drivers must be enabled in order
|
|
to use the functionality of the device.
|
|
|
|
config MFD_MAX8925
|
|
bool "Maxim Semiconductor MAX8925 PMIC Support"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
help
|
|
Say yes here to add support for Maxim Semiconductor MAX8925. This is
|
|
a Power Management IC. This driver provides common support for
|
|
accessing the device, additional drivers must be enabled in order
|
|
to use the functionality of the device.
|
|
|
|
config MFD_MAX8997
|
|
bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select IRQ_DOMAIN
|
|
help
|
|
Say yes here to add support for Maxim Semiconductor MAX8997/8966.
|
|
This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
|
|
MUIC controls on chip.
|
|
This driver provides common support for accessing the device;
|
|
additional drivers must be enabled in order to use the functionality
|
|
of the device.
|
|
|
|
config MFD_MAX8998
|
|
bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select IRQ_DOMAIN
|
|
help
|
|
Say yes here to add support for Maxim Semiconductor MAX8998 and
|
|
National Semiconductor LP3974. This is a Power Management IC.
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the functionality
|
|
of the device.
|
|
|
|
config MFD_MT6397
|
|
tristate "MediaTek MT6397 PMIC Support"
|
|
select MFD_CORE
|
|
select IRQ_DOMAIN
|
|
help
|
|
Say yes here to add support for MediaTek MT6397 PMIC. This is
|
|
a Power Management IC. This driver provides common support for
|
|
accessing the device; additional drivers must be enabled in order
|
|
to use the functionality of the device.
|
|
|
|
config MFD_MENF21BMC
|
|
tristate "MEN 14F021P00 Board Management Controller Support"
|
|
depends on I2C
|
|
select MFD_CORE
|
|
help
|
|
Say yes here to add support for the MEN 14F021P00 BMC
|
|
which is a Board Management Controller connected to the I2C bus.
|
|
The device supports multiple sub-devices like LED, HWMON and WDT.
|
|
This driver provides common support for accessing the devices;
|
|
additional drivers must be enabled in order to use the
|
|
functionality of the BMC device.
|
|
|
|
This driver can also be built as a module. If so the module
|
|
will be called menf21bmc.
|
|
|
|
config EZX_PCAP
|
|
bool "Motorola EZXPCAP Support"
|
|
depends on SPI_MASTER
|
|
help
|
|
This enables the PCAP ASIC present on EZX Phones. This is
|
|
needed for MMC, TouchScreen, Sound, USB, etc..
|
|
|
|
config MFD_VIPERBOARD
|
|
tristate "Nano River Technologies Viperboard"
|
|
select MFD_CORE
|
|
depends on USB
|
|
default n
|
|
help
|
|
Say yes here if you want support for Nano River Technologies
|
|
Viperboard.
|
|
There are mfd cell drivers available for i2c master, adc and
|
|
both gpios found on the board. The spi part does not yet
|
|
have a driver.
|
|
You need to select the mfd cell drivers separately.
|
|
The drivers do not support all features the board exposes.
|
|
|
|
config MFD_RETU
|
|
tristate "Nokia Retu and Tahvo multi-function device"
|
|
select MFD_CORE
|
|
depends on I2C
|
|
select REGMAP_IRQ
|
|
help
|
|
Retu and Tahvo are a multi-function devices found on Nokia
|
|
Internet Tablets (770, N800 and N810).
|
|
|
|
config MFD_PCF50633
|
|
tristate "NXP PCF50633"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Say yes here if you have NXP PCF50633 chip on your board.
|
|
This core driver provides register access and IRQ handling
|
|
facilities, and registers devices for the various functions
|
|
so that function-specific drivers can bind to them.
|
|
|
|
config PCF50633_ADC
|
|
tristate "NXP PCF50633 ADC"
|
|
depends on MFD_PCF50633
|
|
help
|
|
Say yes here if you want to include support for ADC in the
|
|
NXP PCF50633 chip.
|
|
|
|
config PCF50633_GPIO
|
|
tristate "NXP PCF50633 GPIO"
|
|
depends on MFD_PCF50633
|
|
help
|
|
Say yes here if you want to include support GPIO for pins on
|
|
the PCF50633 chip.
|
|
|
|
config UCB1400_CORE
|
|
tristate "Philips UCB1400 Core driver"
|
|
depends on AC97_BUS
|
|
depends on GPIOLIB
|
|
help
|
|
This enables support for the Philips UCB1400 core functions.
|
|
The UCB1400 is an AC97 audio codec.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ucb1400_core.
|
|
|
|
config MFD_PM8XXX
|
|
tristate
|
|
|
|
config MFD_PM8921_CORE
|
|
tristate "Qualcomm PM8921 PMIC chip"
|
|
depends on (ARM || HEXAGON)
|
|
select IRQ_DOMAIN
|
|
select MFD_CORE
|
|
select MFD_PM8XXX
|
|
select REGMAP
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
built-in PM8921 PMIC chip.
|
|
|
|
This is required if your board has a PM8921 and uses its features,
|
|
such as: MPPs, GPIOs, regulators, interrupts, and PWM.
|
|
|
|
Say M here if you want to include support for PM8921 chip as a module.
|
|
This will build a module called "pm8921-core".
|
|
|
|
config MFD_QCOM_RPM
|
|
tristate "Qualcomm Resource Power Manager (RPM)"
|
|
depends on ARCH_QCOM && OF
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
Resource Power Manager system found in the Qualcomm 8660, 8960 and
|
|
8064 based devices.
|
|
|
|
This is required to access many regulators, clocks and bus
|
|
frequencies controlled by the RPM on these devices.
|
|
|
|
Say M here if you want to include support for the Qualcomm RPM as a
|
|
module. This will build a module called "qcom_rpm".
|
|
|
|
config MFD_SPMI_PMIC
|
|
tristate "Qualcomm SPMI PMICs"
|
|
depends on ARCH_QCOM || COMPILE_TEST || ARCH_MSM
|
|
depends on OF
|
|
depends on SPMI
|
|
select REGMAP_SPMI
|
|
help
|
|
This enables support for the Qualcomm SPMI PMICs.
|
|
These PMICs are currently used with the Snapdragon 800 series of
|
|
SoCs. Note, that this will only be useful paired with descriptions
|
|
of the independent functions as children nodes in the device tree.
|
|
|
|
Say M here if you want to include support for the SPMI PMIC
|
|
series as a module. The module will be called "qcom-spmi-pmic".
|
|
|
|
config MFD_I2C_PMIC
|
|
tristate "QTI I2C PMICs"
|
|
depends on OF
|
|
depends on I2C
|
|
select IRQ_DOMAIN
|
|
select REGMAP_I2C
|
|
help
|
|
This enables support for controlling Qualcomm Technologies, Inc.
|
|
PMICs over I2C. The driver controls interrupts, and provides register
|
|
access for all of the device's peripherals.
|
|
|
|
Say M here if you want to include support for the I2C PMIC series as
|
|
a module. The module will be called "qcom-i2c-pmic".
|
|
|
|
config MFD_RDC321X
|
|
tristate "RDC R-321x southbridge"
|
|
select MFD_CORE
|
|
depends on PCI
|
|
help
|
|
Say yes here if you want to have support for the RDC R-321x SoC
|
|
southbridge which provides access to GPIOs and Watchdog using the
|
|
southbridge PCI device configuration space.
|
|
|
|
config MFD_RTSX_PCI
|
|
tristate "Realtek PCI-E card reader"
|
|
depends on PCI
|
|
select MFD_CORE
|
|
help
|
|
This supports for Realtek PCI-Express card reader including rts5209,
|
|
rts5227, rts522A, rts5229, rts5249, rts524A, rts525A, rtl8411, etc.
|
|
Realtek card reader supports access to many types of memory cards,
|
|
such as Memory Stick, Memory Stick Pro, Secure Digital and
|
|
MultiMediaCard.
|
|
|
|
config MFD_RT5033
|
|
tristate "Richtek RT5033 Power Management IC"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
help
|
|
This driver provides for the Richtek RT5033 Power Management IC,
|
|
which includes the I2C driver and the Core APIs. This driver provides
|
|
common support for accessing the device. The device supports multiple
|
|
sub-devices like charger, fuel gauge, flash LED, current source,
|
|
LDO and Buck.
|
|
|
|
config MFD_RTSX_USB
|
|
tristate "Realtek USB card reader"
|
|
depends on USB
|
|
select MFD_CORE
|
|
help
|
|
Select this option to get support for Realtek USB 2.0 card readers
|
|
including RTS5129, RTS5139, RTS5179 and RTS5170.
|
|
Realtek card reader supports access to many types of memory cards,
|
|
such as Memory Stick Pro, Secure Digital and MultiMediaCard.
|
|
|
|
config MFD_RC5T583
|
|
bool "Ricoh RC5T583 Power Management system device"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
help
|
|
Select this option to get support for the RICOH583 Power
|
|
Management system device.
|
|
This driver provides common support for accessing the device
|
|
through i2c interface. The device supports multiple sub-devices
|
|
like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
|
|
Additional drivers must be enabled in order to use the
|
|
different functionality of the device.
|
|
|
|
config MFD_RK808
|
|
tristate "Rockchip RK808 Power Management chip"
|
|
depends on I2C && OF
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
help
|
|
If you say yes here you get support for the RK808
|
|
Power Management chips.
|
|
This driver provides common support for accessing the device
|
|
through I2C interface. The device supports multiple sub-devices
|
|
including interrupts, RTC, LDO & DCDC regulators, and onkey.
|
|
|
|
config MFD_RN5T618
|
|
tristate "Ricoh RN5T5618 PMIC"
|
|
depends on I2C
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
help
|
|
Say yes here to add support for the Ricoh RN5T618 PMIC. This
|
|
driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the
|
|
functionality of the device.
|
|
|
|
config MFD_SEC_CORE
|
|
bool "SAMSUNG Electronics PMIC Series Support"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
help
|
|
Support for the Samsung Electronics MFD series.
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the functionality
|
|
of the device
|
|
|
|
config MFD_SI476X_CORE
|
|
tristate "Silicon Laboratories 4761/64/68 AM/FM radio."
|
|
depends on I2C
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
help
|
|
This is the core driver for the SI476x series of AM/FM
|
|
radio. This MFD driver connects the radio-si476x V4L2 module
|
|
and the si476x audio codec.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called si476x-core.
|
|
|
|
config MFD_SM501
|
|
tristate "Silicon Motion SM501"
|
|
---help---
|
|
This is the core driver for the Silicon Motion SM501 multimedia
|
|
companion chip. This device is a multifunction device which may
|
|
provide numerous interfaces including USB host controller, USB gadget,
|
|
asynchronous serial ports, audio functions, and a dual display video
|
|
interface. The device may be connected by PCI or local bus with
|
|
varying functions enabled.
|
|
|
|
config MFD_SM501_GPIO
|
|
bool "Export GPIO via GPIO layer"
|
|
depends on MFD_SM501 && GPIOLIB
|
|
---help---
|
|
This option uses the gpio library layer to export the 64 GPIO
|
|
lines on the SM501. The platform data is used to supply the
|
|
base number for the first GPIO line to register.
|
|
|
|
config MFD_SKY81452
|
|
tristate "Skyworks Solutions SKY81452"
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
depends on I2C
|
|
help
|
|
This is the core driver for the Skyworks SKY81452 backlight and
|
|
voltage regulator device.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sky81452.
|
|
|
|
config MFD_SMSC
|
|
bool "SMSC ECE1099 series chips"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for the
|
|
ece1099 chips from SMSC.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called smsc.
|
|
|
|
config ABX500_CORE
|
|
bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
|
|
default y if ARCH_U300 || ARCH_U8500
|
|
help
|
|
Say yes here if you have the ABX500 Mixed Signal IC family
|
|
chips. This core driver expose register access functions.
|
|
Functionality specific drivers using these functions can
|
|
remain unchanged when IC changes. Binding of the functions to
|
|
actual register access is done by the IC core driver.
|
|
|
|
config AB3100_CORE
|
|
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
|
|
depends on I2C=y && ABX500_CORE
|
|
select MFD_CORE
|
|
default y if ARCH_U300
|
|
help
|
|
Select this to enable the AB3100 Mixed Signal IC core
|
|
functionality. This connects to a AB3100 on the I2C bus
|
|
and expose a number of symbols needed for dependent devices
|
|
to read and write registers and subscribe to events from
|
|
this multi-functional IC. This is needed to use other features
|
|
of the AB3100 such as battery-backed RTC, charging control,
|
|
LEDs, vibrator, system power and temperature, power management
|
|
and ALSA sound.
|
|
|
|
config AB3100_OTP
|
|
tristate "ST-Ericsson AB3100 OTP functions"
|
|
depends on AB3100_CORE
|
|
default y if AB3100_CORE
|
|
help
|
|
Select this to enable the AB3100 Mixed Signal IC OTP (one-time
|
|
programmable memory) support. This exposes a sysfs file to read
|
|
out OTP values.
|
|
|
|
config AB8500_CORE
|
|
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
|
|
depends on ABX500_CORE && MFD_DB8500_PRCMU
|
|
select POWER_SUPPLY
|
|
select MFD_CORE
|
|
select IRQ_DOMAIN
|
|
help
|
|
Select this option to enable access to AB8500 power management
|
|
chip. This connects to U8500 either on the SSP/SPI bus (deprecated
|
|
since hardware version v1.0) or the I2C bus via PRCMU. It also adds
|
|
the irq_chip parts for handling the Mixed Signal chip events.
|
|
This chip embeds various other multimedia funtionalities as well.
|
|
|
|
config AB8500_DEBUG
|
|
bool "Enable debug info via debugfs"
|
|
depends on AB8500_GPADC && DEBUG_FS
|
|
default y if DEBUG_FS
|
|
help
|
|
Select this option if you want debug information using the debug
|
|
filesystem, debugfs.
|
|
|
|
config AB8500_GPADC
|
|
bool "ST-Ericsson AB8500 GPADC driver"
|
|
depends on AB8500_CORE && REGULATOR_AB8500
|
|
default y
|
|
help
|
|
AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
|
|
|
|
config MFD_DB8500_PRCMU
|
|
bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
|
|
depends on UX500_SOC_DB8500
|
|
select MFD_CORE
|
|
help
|
|
Select this option to enable support for the DB8500 Power Reset
|
|
and Control Management Unit. This is basically an autonomous
|
|
system controller running an XP70 microprocessor, which is accessed
|
|
through a register map.
|
|
|
|
config MFD_STMPE
|
|
bool "STMicroelectronics STMPE"
|
|
depends on (I2C=y || SPI_MASTER=y)
|
|
depends on OF
|
|
select MFD_CORE
|
|
help
|
|
Support for the STMPE family of I/O Expanders from
|
|
STMicroelectronics.
|
|
|
|
Currently supported devices are:
|
|
|
|
STMPE811: GPIO, Touchscreen
|
|
STMPE1601: GPIO, Keypad
|
|
STMPE1801: GPIO, Keypad
|
|
STMPE2401: GPIO, Keypad
|
|
STMPE2403: GPIO, Keypad
|
|
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the functionality
|
|
of the device. Currently available sub drivers are:
|
|
|
|
GPIO: stmpe-gpio
|
|
Keypad: stmpe-keypad
|
|
Touchscreen: stmpe-ts
|
|
|
|
menu "STMicroelectronics STMPE Interface Drivers"
|
|
depends on MFD_STMPE
|
|
|
|
config STMPE_I2C
|
|
bool "STMicroelectronics STMPE I2C Interface"
|
|
depends on I2C=y
|
|
default y
|
|
help
|
|
This is used to enable I2C interface of STMPE
|
|
|
|
config STMPE_SPI
|
|
bool "STMicroelectronics STMPE SPI Interface"
|
|
depends on SPI_MASTER
|
|
help
|
|
This is used to enable SPI interface of STMPE
|
|
endmenu
|
|
|
|
config MFD_STA2X11
|
|
bool "STMicroelectronics STA2X11"
|
|
depends on STA2X11
|
|
select MFD_CORE
|
|
select REGMAP_MMIO
|
|
|
|
config MFD_SUN6I_PRCM
|
|
bool "Allwinner A31 PRCM controller"
|
|
depends on ARCH_SUNXI
|
|
select MFD_CORE
|
|
help
|
|
Support for the PRCM (Power/Reset/Clock Management) unit available
|
|
in A31 SoC.
|
|
|
|
config MFD_SYSCON
|
|
bool "System Controller Register R/W Based on Regmap"
|
|
select REGMAP_MMIO
|
|
help
|
|
Select this option to enable accessing system control registers
|
|
via regmap.
|
|
|
|
config MFD_DAVINCI_VOICECODEC
|
|
tristate
|
|
select MFD_CORE
|
|
select REGMAP_MMIO
|
|
|
|
config MFD_TI_AM335X_TSCADC
|
|
tristate "TI ADC / Touch Screen chip support"
|
|
select MFD_CORE
|
|
select REGMAP
|
|
select REGMAP_MMIO
|
|
help
|
|
If you say yes here you get support for Texas Instruments series
|
|
of Touch Screen /ADC chips.
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ti_am335x_tscadc.
|
|
|
|
config MFD_DM355EVM_MSP
|
|
bool "TI DaVinci DM355 EVM microcontroller"
|
|
depends on I2C=y && MACH_DAVINCI_DM355_EVM
|
|
help
|
|
This driver supports the MSP430 microcontroller used on these
|
|
boards. MSP430 firmware manages resets and power sequencing,
|
|
inputs from buttons and the IR remote, LEDs, an RTC, and more.
|
|
|
|
config MFD_LP3943
|
|
tristate "TI/National Semiconductor LP3943 MFD Driver"
|
|
depends on I2C
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
help
|
|
Support for the TI/National Semiconductor LP3943.
|
|
This driver consists of GPIO and PWM drivers.
|
|
With these functionalities, it can be used for LED string control or
|
|
general usage such like a GPIO controller and a PWM controller.
|
|
|
|
config MFD_LP8788
|
|
bool "TI LP8788 Power Management Unit Driver"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select IRQ_DOMAIN
|
|
help
|
|
TI LP8788 PMU supports regulators, battery charger, RTC,
|
|
ADC, backlight driver and current sinks.
|
|
|
|
config MFD_OMAP_USB_HOST
|
|
bool "TI OMAP USBHS core and TLL driver"
|
|
depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
|
|
default y
|
|
help
|
|
This is the core driver for the OAMP EHCI and OHCI drivers.
|
|
This MFD driver does the required setup functionalities for
|
|
OMAP USB Host drivers.
|
|
|
|
config MFD_PALMAS
|
|
bool "TI Palmas series chips"
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
depends on I2C=y
|
|
help
|
|
If you say yes here you get support for the Palmas
|
|
series of PMIC chips from Texas Instruments.
|
|
|
|
config TPS6105X
|
|
tristate "TI TPS61050/61052 Boost Converters"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
select REGULATOR
|
|
select MFD_CORE
|
|
select REGULATOR_FIXED_VOLTAGE
|
|
help
|
|
This option enables a driver for the TP61050/TPS61052
|
|
high-power "white LED driver". This boost converter is
|
|
sometimes used for other things than white LEDs, and
|
|
also contains a GPIO pin.
|
|
|
|
config TPS65010
|
|
tristate "TI TPS6501x Power Management chips"
|
|
depends on I2C && GPIOLIB
|
|
default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
|
|
help
|
|
If you say yes here you get support for the TPS6501x series of
|
|
Power Management chips. These include voltage regulators,
|
|
lithium ion/polymer battery charging, and other features that
|
|
are often used in portable devices like cell phones and cameras.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tps65010.
|
|
|
|
config TPS6507X
|
|
tristate "TI TPS6507x Power Management / Touch Screen chips"
|
|
select MFD_CORE
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the TPS6507x series of
|
|
Power Management / Touch Screen chips. These include voltage
|
|
regulators, lithium ion/polymer battery charging, touch screen
|
|
and other features that are often used in portable devices.
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tps6507x.
|
|
|
|
config TPS65911_COMPARATOR
|
|
tristate
|
|
|
|
config MFD_TPS65090
|
|
bool "TI TPS65090 Power Management chips"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
help
|
|
If you say yes here you get support for the TPS65090 series of
|
|
Power Management chips.
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the
|
|
functionality of the device.
|
|
|
|
config MFD_TPS65217
|
|
tristate "TI TPS65217 Power Management / White LED chips"
|
|
depends on I2C
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for the TPS65217 series of
|
|
Power Management / White LED chips.
|
|
These include voltage regulators, lithium ion/polymer battery
|
|
charger, wled and other features that are often used in portable
|
|
devices.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tps65217.
|
|
|
|
config MFD_TPS65218
|
|
tristate "TI TPS65218 Power Management chips"
|
|
depends on I2C
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
help
|
|
If you say yes here you get support for the TPS65218 series of
|
|
Power Management chips.
|
|
These include voltage regulators, gpio and other features
|
|
that are often used in portable devices. Only regulator
|
|
component is currently supported.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tps65218.
|
|
|
|
config MFD_TPS6586X
|
|
bool "TI TPS6586x Power Management chips"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for the TPS6586X series of
|
|
Power Management chips.
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the
|
|
functionality of the device.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tps6586x.
|
|
|
|
config MFD_TPS65910
|
|
bool "TI TPS65910 Power Management chip"
|
|
depends on I2C=y
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
select IRQ_DOMAIN
|
|
help
|
|
if you say yes here you get support for the TPS65910 series of
|
|
Power Management chips.
|
|
|
|
config MFD_TPS65912
|
|
bool "TI TPS65912 Power Management chip"
|
|
depends on GPIOLIB
|
|
select MFD_CORE
|
|
help
|
|
If you say yes here you get support for the TPS65912 series of
|
|
PM chips.
|
|
|
|
config MFD_TPS65912_I2C
|
|
bool "TI TPS65912 Power Management chip with I2C"
|
|
select MFD_CORE
|
|
select MFD_TPS65912
|
|
depends on I2C=y && GPIOLIB
|
|
help
|
|
If you say yes here you get support for the TPS65912 series of
|
|
PM chips with I2C interface.
|
|
|
|
config MFD_TPS65912_SPI
|
|
bool "TI TPS65912 Power Management chip with SPI"
|
|
select MFD_CORE
|
|
select MFD_TPS65912
|
|
depends on SPI_MASTER && GPIOLIB
|
|
help
|
|
If you say yes here you get support for the TPS65912 series of
|
|
PM chips with SPI interface.
|
|
|
|
config MFD_TPS80031
|
|
bool "TI TPS80031/TPS80032 Power Management chips"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
help
|
|
If you say yes here you get support for the Texas Instruments
|
|
TPS80031/ TPS80032 Fully Integrated Power Management with Power
|
|
Path and Battery Charger. The device provides five configurable
|
|
step-down converters, 11 general purpose LDOs, USB OTG Module,
|
|
ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
|
|
Power Path from USB, 32K clock generator.
|
|
|
|
config TWL4030_CORE
|
|
bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
|
|
depends on I2C=y
|
|
select IRQ_DOMAIN
|
|
select REGMAP_I2C
|
|
help
|
|
Say yes here if you have TWL4030 / TWL6030 family chip on your board.
|
|
This core driver provides register access and IRQ handling
|
|
facilities, and registers devices for the various functions
|
|
so that function-specific drivers can bind to them.
|
|
|
|
These multi-function chips are found on many OMAP2 and OMAP3
|
|
boards, providing power management, RTC, GPIO, keypad, a
|
|
high speed USB OTG transceiver, an audio codec (on most
|
|
versions) and many other features.
|
|
|
|
config TWL4030_POWER
|
|
bool "TI TWL4030 power resources"
|
|
depends on TWL4030_CORE && ARM
|
|
help
|
|
Say yes here if you want to use the power resources on the
|
|
TWL4030 family chips. Most of these resources are regulators,
|
|
which have a separate driver; some are control signals, such
|
|
as clock request handshaking.
|
|
|
|
This driver uses board-specific data to initialize the resources
|
|
and load scripts controlling which resources are switched off/on
|
|
or reset when a sleep, wakeup or warm reset event occurs.
|
|
|
|
config MFD_TWL4030_AUDIO
|
|
bool "TI TWL4030 Audio"
|
|
depends on TWL4030_CORE
|
|
select MFD_CORE
|
|
default n
|
|
|
|
config TWL6040_CORE
|
|
bool "TI TWL6040 audio codec"
|
|
depends on I2C=y
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
default n
|
|
help
|
|
Say yes here if you want support for Texas Instruments TWL6040 audio
|
|
codec.
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the
|
|
functionality of the device (audio, vibra).
|
|
|
|
config MENELAUS
|
|
bool "TI TWL92330/Menelaus PM chip"
|
|
depends on I2C=y && ARCH_OMAP2
|
|
help
|
|
If you say yes here you get support for the Texas Instruments
|
|
TWL92330/Menelaus Power Management chip. This include voltage
|
|
regulators, Dual slot memory card transceivers, real-time clock
|
|
and other features that are often used in portable devices like
|
|
cell phones and PDAs.
|
|
|
|
config MFD_WL1273_CORE
|
|
tristate "TI WL1273 FM radio"
|
|
depends on I2C
|
|
select MFD_CORE
|
|
default n
|
|
help
|
|
This is the core driver for the TI WL1273 FM radio. This MFD
|
|
driver connects the radio-wl1273 V4L2 module and the wl1273
|
|
audio codec.
|
|
|
|
config MFD_LM3533
|
|
tristate "TI/National Semiconductor LM3533 Lighting Power chip"
|
|
depends on I2C
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
help
|
|
Say yes here to enable support for National Semiconductor / TI
|
|
LM3533 Lighting Power chips.
|
|
|
|
This driver provides common support for accessing the device;
|
|
additional drivers must be enabled in order to use the LED,
|
|
backlight or ambient-light-sensor functionality of the device.
|
|
|
|
config MFD_TIMBERDALE
|
|
tristate "Timberdale FPGA"
|
|
select MFD_CORE
|
|
depends on PCI && GPIOLIB && (X86_32 || COMPILE_TEST)
|
|
---help---
|
|
This is the core driver for the timberdale FPGA. This device is a
|
|
multifunction device which exposes numerous platform devices.
|
|
|
|
The timberdale FPGA can be found on the Intel Atom development board
|
|
for in-vehicle infontainment, called Russellville.
|
|
|
|
config MFD_TC3589X
|
|
bool "Toshiba TC35892 and variants"
|
|
depends on I2C=y
|
|
depends on OF
|
|
select MFD_CORE
|
|
help
|
|
Support for the Toshiba TC35892 and variants I/O Expander.
|
|
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the
|
|
functionality of the device.
|
|
|
|
config MFD_TMIO
|
|
bool
|
|
default n
|
|
|
|
config MFD_T7L66XB
|
|
bool "Toshiba T7L66XB"
|
|
depends on ARM && HAVE_CLK
|
|
select MFD_CORE
|
|
select MFD_TMIO
|
|
help
|
|
Support for Toshiba Mobile IO Controller T7L66XB
|
|
|
|
config MFD_TC6387XB
|
|
bool "Toshiba TC6387XB"
|
|
depends on ARM && HAVE_CLK
|
|
select MFD_CORE
|
|
select MFD_TMIO
|
|
help
|
|
Support for Toshiba Mobile IO Controller TC6387XB
|
|
|
|
config MFD_TC6393XB
|
|
bool "Toshiba TC6393XB"
|
|
depends on ARM && HAVE_CLK
|
|
select GPIOLIB
|
|
select MFD_CORE
|
|
select MFD_TMIO
|
|
help
|
|
Support for Toshiba Mobile IO Controller TC6393XB
|
|
|
|
config MFD_VX855
|
|
tristate "VIA VX855/VX875 integrated south bridge"
|
|
depends on PCI
|
|
select MFD_CORE
|
|
help
|
|
Say yes here to enable support for various functions of the
|
|
VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
|
|
and/or vx855_gpio drivers for this to do anything useful.
|
|
|
|
config MFD_ARIZONA
|
|
select REGMAP
|
|
select REGMAP_IRQ
|
|
select MFD_CORE
|
|
bool
|
|
|
|
config MFD_ARIZONA_I2C
|
|
tristate "Wolfson Microelectronics Arizona platform with I2C"
|
|
select MFD_ARIZONA
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
depends on I2C
|
|
help
|
|
Support for the Wolfson Microelectronics Arizona platform audio SoC
|
|
core functionality controlled via I2C.
|
|
|
|
config MFD_ARIZONA_SPI
|
|
tristate "Wolfson Microelectronics Arizona platform with SPI"
|
|
select MFD_ARIZONA
|
|
select MFD_CORE
|
|
select REGMAP_SPI
|
|
depends on SPI_MASTER
|
|
help
|
|
Support for the Wolfson Microelectronics Arizona platform audio SoC
|
|
core functionality controlled via I2C.
|
|
|
|
config MFD_WM5102
|
|
bool "Wolfson Microelectronics WM5102"
|
|
depends on MFD_ARIZONA
|
|
help
|
|
Support for Wolfson Microelectronics WM5102 low power audio SoC
|
|
|
|
config MFD_WM5110
|
|
bool "Wolfson Microelectronics WM5110 and WM8280/WM8281"
|
|
depends on MFD_ARIZONA
|
|
help
|
|
Support for Wolfson Microelectronics WM5110 and WM8280/WM8281
|
|
low power audio SoC
|
|
|
|
config MFD_WM8997
|
|
bool "Wolfson Microelectronics WM8997"
|
|
depends on MFD_ARIZONA
|
|
help
|
|
Support for Wolfson Microelectronics WM8997 low power audio SoC
|
|
|
|
config MFD_WM8998
|
|
bool "Wolfson Microelectronics WM8998"
|
|
depends on MFD_ARIZONA
|
|
help
|
|
Support for Wolfson Microelectronics WM8998 low power audio SoC
|
|
|
|
config MFD_WM8400
|
|
bool "Wolfson Microelectronics WM8400"
|
|
select MFD_CORE
|
|
depends on I2C=y
|
|
select REGMAP_I2C
|
|
help
|
|
Support for the Wolfson Microelecronics WM8400 PMIC and audio
|
|
CODEC. This driver provides common support for accessing
|
|
the device, additional drivers must be enabled in order to use
|
|
the functionality of the device.
|
|
|
|
config MFD_WM831X
|
|
bool
|
|
|
|
config MFD_WM831X_I2C
|
|
bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
|
|
select MFD_CORE
|
|
select MFD_WM831X
|
|
select REGMAP_I2C
|
|
select IRQ_DOMAIN
|
|
depends on I2C=y
|
|
help
|
|
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
|
|
when controlled using I2C. This driver provides common support
|
|
for accessing the device, additional drivers must be enabled in
|
|
order to use the functionality of the device.
|
|
|
|
config MFD_WM831X_SPI
|
|
bool "Wolfson Microelectronics WM831x/2x PMICs with SPI"
|
|
select MFD_CORE
|
|
select MFD_WM831X
|
|
select REGMAP_SPI
|
|
select IRQ_DOMAIN
|
|
depends on SPI_MASTER
|
|
help
|
|
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
|
|
when controlled using SPI. This driver provides common support
|
|
for accessing the device, additional drivers must be enabled in
|
|
order to use the functionality of the device.
|
|
|
|
config MFD_WM8350
|
|
bool
|
|
|
|
config MFD_WM8350_I2C
|
|
bool "Wolfson Microelectronics WM8350 with I2C"
|
|
select MFD_WM8350
|
|
select REGMAP_I2C
|
|
depends on I2C=y
|
|
help
|
|
The WM8350 is an integrated audio and power management
|
|
subsystem with watchdog and RTC functionality for embedded
|
|
systems. This option enables core support for the WM8350 with
|
|
I2C as the control interface. Additional options must be
|
|
selected to enable support for the functionality of the chip.
|
|
|
|
config MFD_WM8994
|
|
tristate "Wolfson Microelectronics WM8994"
|
|
select MFD_CORE
|
|
select REGMAP_I2C
|
|
select REGMAP_IRQ
|
|
depends on I2C
|
|
help
|
|
The WM8994 is a highly integrated hi-fi CODEC designed for
|
|
smartphone applications. As well as audio functionality it
|
|
has on board GPIO and regulator functionality which is
|
|
supported via the relevant subsystems. This driver provides
|
|
core support for the WM8994, in order to use the actual
|
|
functionaltiy of the device other drivers must be enabled.
|
|
|
|
config MFD_STW481X
|
|
tristate "Support for ST Microelectronics STw481x"
|
|
depends on I2C && (ARCH_NOMADIK || COMPILE_TEST)
|
|
select REGMAP_I2C
|
|
select MFD_CORE
|
|
help
|
|
Select this option to enable the STw481x chip driver used
|
|
in various ST Microelectronics and ST-Ericsson embedded
|
|
Nomadik series.
|
|
|
|
config MSM_CDC_PINCTRL
|
|
tristate "MSM Codec Pinctrl"
|
|
select MFD_CORE
|
|
help
|
|
Enables msm codec pinctrl driver. The pinctrl driver
|
|
provides support for handling WCD and WSA MSM gpios. This
|
|
pinctrl driver will handle WCD and WSA gpios pinctrl states.
|
|
This driver acts as interface between codec and pinctrl
|
|
framework.
|
|
|
|
config MSM_CDC_SUPPLY
|
|
tristate "MSM Codec Power Supply"
|
|
help
|
|
Enables msm codec power supply driver. The power supply
|
|
driver provides API support for handling WCD and WSA codec
|
|
power supply enable or disable. This driver acts as interface
|
|
between codec and regulator framework.
|
|
|
|
config WCD9XXX_CODEC_UTIL
|
|
tristate "WCD9XXX Codec Utils"
|
|
select MFD_CORE
|
|
help
|
|
WCD9XXX Util driver provides APIs for WCD drivers to reset,
|
|
suspend/resume, regmap bus callback functions and read/write
|
|
functions. This driver also hides the underlying bus related
|
|
functionalities.
|
|
|
|
config WCD9330_CODEC
|
|
tristate "WCD9330 Codec"
|
|
select SLIMBUS
|
|
select MFD_CORE
|
|
select WCD9XXX_CODEC_UTIL
|
|
select MSM_CDC_SUPPLY
|
|
help
|
|
Enables the WCD9xxx codec core driver. The core driver provides
|
|
read/write capability to registers which are part of the
|
|
WCD9330 core and gives the ability to use the WCD9330 codec.
|
|
The WCD9330 codec support either I2C/I2S or Slimbus for
|
|
control and data exchnage with master processor.
|
|
|
|
config WCD9335_CODEC
|
|
tristate "WCD9335 Codec"
|
|
select SLIMBUS
|
|
select SOUNDWIRE_WCD_CTRL
|
|
select MFD_CORE
|
|
select WCD9XXX_CODEC_UTIL
|
|
select MSM_CDC_SUPPLY
|
|
select MSM_CDC_PINCTRL
|
|
help
|
|
Enables the WCD9xxx codec core driver. The core driver provides
|
|
read/write capability to registers which are part of the
|
|
WCD9335 core and gives the ability to use the WCD9335 codec.
|
|
The WCD9335 codec support either I2C/I2S or Slimbus for
|
|
control and data exchnage with master processor.
|
|
|
|
config WCD934X_CODEC
|
|
tristate "WCD934X Codec"
|
|
depends on SLIMBUS
|
|
select SOUNDWIRE_WCD_CTRL
|
|
select MFD_CORE
|
|
select WCD9XXX_CODEC_UTIL
|
|
select MSM_CDC_SUPPLY
|
|
select MSM_CDC_PINCTRL
|
|
select PINCTRL_WCD
|
|
help
|
|
Enables the WCD9xxx codec core driver. The core driver provides
|
|
read/write capability to registers which are part of the
|
|
WCD934X core and gives the ability to use the WCD934X codec.
|
|
The WCD934X codec supports either I2C/I2S or Slimbus for
|
|
control and data exchange with master processor.
|
|
|
|
menu "Multimedia Capabilities Port drivers"
|
|
depends on ARCH_SA1100
|
|
|
|
config MCP
|
|
tristate
|
|
|
|
# Interface drivers
|
|
config MCP_SA11X0
|
|
tristate "Support SA11x0 MCP interface"
|
|
depends on ARCH_SA1100
|
|
select MCP
|
|
|
|
# Chip drivers
|
|
config MCP_UCB1200
|
|
tristate "Support for UCB1200 / UCB1300"
|
|
depends on MCP_SA11X0
|
|
select MCP
|
|
|
|
config MCP_UCB1200_TS
|
|
tristate "Touchscreen interface support"
|
|
depends on MCP_UCB1200 && INPUT
|
|
|
|
endmenu
|
|
|
|
config MFD_VEXPRESS_SYSREG
|
|
bool "Versatile Express System Registers"
|
|
depends on VEXPRESS_CONFIG && GPIOLIB
|
|
default y
|
|
select CLKSRC_MMIO
|
|
select GPIO_GENERIC_PLATFORM
|
|
select MFD_CORE
|
|
select MFD_SYSCON
|
|
help
|
|
System Registers are the platform configuration block
|
|
on the ARM Ltd. Versatile Express board.
|
|
|
|
endmenu
|
|
endif
|