android_kernel_oneplus_msm8998/drivers/usb
Bin Liu 68fe05e2a4 usb: musb: fix tx fifo flush handling
Here are a few changes in musb_h_tx_flush_fifo().

- It has been observed that sometimes (if not always) musb is unable
  to flush tx fifo during urb dequeue when disconnect a device. But
  it seems to be harmless, since the tx fifo flush is done again in
  musb_ep_program() when re-use the hw_ep.

  But the WARN() floods the console in the case when multiple tx urbs
  are queued, so change it to dev_WARN_ONCE().

- applications could queue up many tx urbs, then the 1ms delay could
  causes minutes of delay in device disconnect. So remove it to get
  better user experience. The 1ms delay does not help the flushing
  anyway.

- cleanup the debug code - related to lastcsr.

----
Note: The tx fifo flush issue has been observed during device disconnect
on AM335x.

To reproduce the issue, ensure tx urb(s) are queued when unplug the usb
device which is connected to AM335x usb host port.

I found using a usb-ethernet device and running iperf (client on AM335x)
has very high chance to trigger the problem.

Better to turn on dev_dbg() in musb_cleanup_urb() with CPPI enabled to
see the issue when aborting the tx channel.

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-17 11:35:48 -06:00
..
atm USB: atm: cxacru: fix blank line after declaration 2015-07-22 14:55:22 -07:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea USB Chipidea updates for v4.4-rc1 2015-10-22 18:24:38 -07:00
class Merge 4.2-rc4 into usb-next 2015-07-27 11:15:16 -07:00
common usb: common: of_usb_get_dr_mode to usb_get_dr_mode 2015-09-27 10:54:31 -05:00
core USB: core: Codestyle fix in urb.c 2015-10-26 04:04:48 +09:00
dwc2 usb: dwc2: host: Fix remote wakeup when not in DWC2_L2 2015-11-17 11:35:38 -06:00
dwc3 usb: dwc3: pci: add support for Intel Broxton SOC 2015-11-16 10:12:29 -06:00
early
gadget usb: gadget: f_loopback: fix the warning during the enumeration 2015-11-17 11:35:47 -06:00
host dma: remove external references to dma_supported 2015-11-09 15:11:24 -08:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc usb: misc: usb3503: Use i2c_add_driver helper macro 2015-10-24 19:53:53 -07:00
mon USB: mon_stat.c: move assignment out of if () block 2015-05-10 16:01:11 +02:00
musb usb: musb: fix tx fifo flush handling 2015-11-17 11:35:48 -06:00
phy usb: phy: omap-otg: fix uninitialized pointer 2015-11-16 10:17:40 -06:00
renesas_usbhs This is the big bulk of pin control changes for the 2015-11-02 12:30:39 -08:00
serial USB: qcserial: add Sierra Wireless MC74xx/EM74xx 2015-10-22 18:26:57 -07:00
storage SCSI misc on 20151113 2015-11-13 20:35:54 -08:00
usbip usbip: vhci_hcd: at unlink, return -EIDRM if vhci_rx took the urb 2015-10-04 10:59:03 +01:00
wusbcore wusbcore: rh: use USB_DT_HUB 2015-04-03 19:03:15 +02:00
Kconfig usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/ 2015-01-27 09:39:38 -06:00
Makefile usb-host: Remove fusbh200 driver 2015-10-16 23:44:33 -07:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.