android_kernel_oneplus_msm8998/drivers/usb
Lee, Chiasheng 259cad0a1c usb: Handle USB3 remote wakeup for LPM enabled devices correctly
commit e244c4699f859cf7149b0781b1894c7996a8a1df upstream.

With Link Power Management (LPM) enabled USB3 links transition to low
power U1/U2 link states from U0 state automatically.

Current hub code detects USB3 remote wakeups by checking if the software
state still shows suspended, but the link has transitioned from suspended
U3 to enabled U0 state.

As it takes some time before the hub thread reads the port link state
after a USB3 wake notification, the link may have transitioned from U0
to U1/U2, and wake is not detected by hub code.

Fix this by handling U1/U2 states in the same way as U0 in USB3 wakeup
handling

This patch should be added to stable kernels since 4.13 where LPM was
kept enabled during suspend/resume

Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Lee, Chiasheng <chiasheng.lee@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-04 09:34:53 +02:00
..
atm
c67x00
chipidea usb: chipidea: udc: workaround for endpoint conflict issue 2019-07-10 09:56:31 +02:00
class usb: cdc-acm: send ZLP for Telit 3G Intel based modems 2019-01-16 22:16:10 +01:00
common usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices 2016-09-07 08:32:39 +02:00
core usb: Handle USB3 remote wakeup for LPM enabled devices correctly 2019-08-04 09:34:53 +02:00
dwc2 usb: dwc2: Remove unnecessary kfree 2019-02-20 10:13:24 +01:00
dwc3 usb: dwc3: Fix default lpm_nyet_threshold value 2019-05-16 19:45:04 +02:00
early
gadget usb: gadget: ether: Fix race between gether_disconnect and rx_submit 2019-07-21 09:07:11 +02:00
host usb: xhci: avoid null pointer deref when bos field is NULL 2019-06-11 12:24:08 +02:00
image
isp1760
misc USB: rio500: fix memory leak in close after disconnect 2019-06-11 12:24:09 +02:00
mon usb: usbmon: Read text within supplied buffer size 2018-03-18 11:17:53 +01:00
musb usb: musb: fix remote wakeup racing with suspend 2018-07-03 11:21:24 +02:00
phy usb: phy: am335x: fix race condition in _probe 2019-02-20 10:13:16 +01:00
renesas_usbhs usb: renesas_usbhs: add a workaround for a race condition of workqueue 2019-07-21 09:07:11 +02:00
serial USB: serial: option: add support for GosunCn ME3630 RNDIS mode 2019-07-21 09:07:11 +02:00
storage USB: usb-storage: Add new ID to ums-realtek 2019-06-22 08:18:24 +02:00
usbip usb: usbip: fix isoc packet num validation in get_pipe 2019-05-16 19:45:02 +02:00
wusbcore usb: wusbcore: security: cast sizeof to int for comparison 2018-10-10 08:52:05 +02:00
Kconfig
Makefile usb-host: Remove fusbh200 driver 2015-10-16 23:44:33 -07:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.