Newer versions of bimc-bwmon counters have the capability to fake higher byte count than what's actually transferred between a bus master and DDR if the bus master is being throttled by QoS hardware logic. Add support to set the throttle adjust field that comes with this newer version of bimc-bwmon. Change-Id: I33376c825fb11ab2e378f828b1d2ae46dd582836 Signed-off-by: Rohit Gupta <rohgup@codeaurora.org> [junjiew@codeaurora.org: dropped changes in dtsi.] Signed-off-by: Junjie Wu <junjiew@codeaurora.org>
905 lines
22 KiB
C
905 lines
22 KiB
C
/*
|
|
* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "bw-hwmon: " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ktime.h>
|
|
#include <linux/time.h>
|
|
#include <linux/err.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/devfreq.h>
|
|
#include <trace/events/power.h>
|
|
#include "governor.h"
|
|
#include "governor_bw_hwmon.h"
|
|
|
|
#define NUM_MBPS_ZONES 10
|
|
struct hwmon_node {
|
|
unsigned int guard_band_mbps;
|
|
unsigned int decay_rate;
|
|
unsigned int io_percent;
|
|
unsigned int bw_step;
|
|
unsigned int sample_ms;
|
|
unsigned int up_scale;
|
|
unsigned int up_thres;
|
|
unsigned int down_thres;
|
|
unsigned int down_count;
|
|
unsigned int hist_memory;
|
|
unsigned int hyst_trigger_count;
|
|
unsigned int hyst_length;
|
|
unsigned int idle_mbps;
|
|
unsigned int low_power_ceil_mbps;
|
|
unsigned int low_power_io_percent;
|
|
unsigned int low_power_delay;
|
|
unsigned int mbps_zones[NUM_MBPS_ZONES];
|
|
|
|
unsigned long prev_ab;
|
|
unsigned long *dev_ab;
|
|
unsigned long resume_freq;
|
|
unsigned long resume_ab;
|
|
unsigned long bytes;
|
|
unsigned long max_mbps;
|
|
unsigned long hist_max_mbps;
|
|
unsigned long hist_mem;
|
|
unsigned long hyst_peak;
|
|
unsigned long hyst_mbps;
|
|
unsigned long hyst_trig_win;
|
|
unsigned long hyst_en;
|
|
unsigned long above_low_power;
|
|
unsigned long prev_req;
|
|
unsigned long up_wake_mbps;
|
|
unsigned long down_wake_mbps;
|
|
unsigned int wake;
|
|
unsigned int down_cnt;
|
|
ktime_t prev_ts;
|
|
ktime_t hist_max_ts;
|
|
bool sampled;
|
|
bool mon_started;
|
|
struct list_head list;
|
|
void *orig_data;
|
|
struct bw_hwmon *hw;
|
|
struct devfreq_governor *gov;
|
|
struct attribute_group *attr_grp;
|
|
};
|
|
|
|
#define UP_WAKE 1
|
|
#define DOWN_WAKE 2
|
|
static DEFINE_SPINLOCK(irq_lock);
|
|
|
|
static LIST_HEAD(hwmon_list);
|
|
static DEFINE_MUTEX(list_lock);
|
|
|
|
static int use_cnt;
|
|
static DEFINE_MUTEX(state_lock);
|
|
|
|
#define show_attr(name) \
|
|
static ssize_t show_##name(struct device *dev, \
|
|
struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct devfreq *df = to_devfreq(dev); \
|
|
struct hwmon_node *hw = df->data; \
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", hw->name); \
|
|
}
|
|
|
|
#define store_attr(name, _min, _max) \
|
|
static ssize_t store_##name(struct device *dev, \
|
|
struct device_attribute *attr, const char *buf, \
|
|
size_t count) \
|
|
{ \
|
|
struct devfreq *df = to_devfreq(dev); \
|
|
struct hwmon_node *hw = df->data; \
|
|
int ret; \
|
|
unsigned int val; \
|
|
ret = sscanf(buf, "%u", &val); \
|
|
if (ret != 1) \
|
|
return -EINVAL; \
|
|
val = max(val, _min); \
|
|
val = min(val, _max); \
|
|
hw->name = val; \
|
|
return count; \
|
|
}
|
|
|
|
#define gov_attr(__attr, min, max) \
|
|
show_attr(__attr) \
|
|
store_attr(__attr, min, max) \
|
|
static DEVICE_ATTR(__attr, 0644, show_##__attr, store_##__attr)
|
|
|
|
#define show_list_attr(name, n) \
|
|
static ssize_t show_list_##name(struct device *dev, \
|
|
struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct devfreq *df = to_devfreq(dev); \
|
|
struct hwmon_node *hw = df->data; \
|
|
unsigned int i, cnt = 0; \
|
|
\
|
|
for (i = 0; i < n && hw->name[i]; i++) \
|
|
cnt += snprintf(buf + cnt, PAGE_SIZE, "%u ", hw->name[i]);\
|
|
cnt += snprintf(buf + cnt, PAGE_SIZE, "\n"); \
|
|
return cnt; \
|
|
}
|
|
|
|
#define store_list_attr(name, n, _min, _max) \
|
|
static ssize_t store_list_##name(struct device *dev, \
|
|
struct device_attribute *attr, const char *buf, \
|
|
size_t count) \
|
|
{ \
|
|
struct devfreq *df = to_devfreq(dev); \
|
|
struct hwmon_node *hw = df->data; \
|
|
int ret; \
|
|
unsigned int i = 0, val; \
|
|
\
|
|
do { \
|
|
ret = sscanf(buf, "%u", &val); \
|
|
if (ret != 1) \
|
|
break; \
|
|
buf = strnchr(buf, PAGE_SIZE, ' '); \
|
|
if (buf) \
|
|
buf++; \
|
|
val = max(val, _min); \
|
|
val = min(val, _max); \
|
|
hw->name[i] = val; \
|
|
i++; \
|
|
} while (buf && i < n - 1); \
|
|
if (i < 1) \
|
|
return -EINVAL; \
|
|
hw->name[i] = 0; \
|
|
return count; \
|
|
}
|
|
|
|
#define gov_list_attr(__attr, n, min, max) \
|
|
show_list_attr(__attr, n) \
|
|
store_list_attr(__attr, n, min, max) \
|
|
static DEVICE_ATTR(__attr, 0644, show_list_##__attr, store_list_##__attr)
|
|
|
|
#define MIN_MS 10U
|
|
#define MAX_MS 500U
|
|
|
|
/* Returns MBps of read/writes for the sampling window. */
|
|
static unsigned int bytes_to_mbps(long long bytes, unsigned int us)
|
|
{
|
|
bytes *= USEC_PER_SEC;
|
|
do_div(bytes, us);
|
|
bytes = DIV_ROUND_UP_ULL(bytes, SZ_1M);
|
|
return bytes;
|
|
}
|
|
|
|
static unsigned int mbps_to_bytes(unsigned long mbps, unsigned int ms)
|
|
{
|
|
mbps *= ms;
|
|
mbps = DIV_ROUND_UP(mbps, MSEC_PER_SEC);
|
|
mbps *= SZ_1M;
|
|
return mbps;
|
|
}
|
|
|
|
static int __bw_hwmon_sample_end(struct bw_hwmon *hwmon)
|
|
{
|
|
struct devfreq *df;
|
|
struct hwmon_node *node;
|
|
ktime_t ts;
|
|
unsigned long bytes, mbps;
|
|
unsigned int us;
|
|
int wake = 0;
|
|
|
|
df = hwmon->df;
|
|
node = df->data;
|
|
|
|
ts = ktime_get();
|
|
us = ktime_to_us(ktime_sub(ts, node->prev_ts));
|
|
|
|
bytes = hwmon->get_bytes_and_clear(hwmon);
|
|
bytes += node->bytes;
|
|
node->bytes = 0;
|
|
|
|
mbps = bytes_to_mbps(bytes, us);
|
|
node->max_mbps = max(node->max_mbps, mbps);
|
|
|
|
/*
|
|
* If the measured bandwidth in a micro sample is greater than the
|
|
* wake up threshold, it indicates an increase in load that's non
|
|
* trivial. So, have the governor ignore historical idle time or low
|
|
* bandwidth usage and do the bandwidth calculation based on just
|
|
* this micro sample.
|
|
*/
|
|
if (mbps > node->up_wake_mbps) {
|
|
wake = UP_WAKE;
|
|
} else if (mbps < node->down_wake_mbps) {
|
|
if (node->down_cnt)
|
|
node->down_cnt--;
|
|
if (node->down_cnt <= 0)
|
|
wake = DOWN_WAKE;
|
|
}
|
|
|
|
node->prev_ts = ts;
|
|
node->wake = wake;
|
|
node->sampled = true;
|
|
|
|
trace_bw_hwmon_meas(dev_name(df->dev.parent),
|
|
mbps,
|
|
us,
|
|
wake);
|
|
|
|
return wake;
|
|
}
|
|
|
|
int bw_hwmon_sample_end(struct bw_hwmon *hwmon)
|
|
{
|
|
unsigned long flags;
|
|
int wake;
|
|
|
|
spin_lock_irqsave(&irq_lock, flags);
|
|
wake = __bw_hwmon_sample_end(hwmon);
|
|
spin_unlock_irqrestore(&irq_lock, flags);
|
|
|
|
return wake;
|
|
}
|
|
|
|
unsigned long to_mbps_zone(struct hwmon_node *node, unsigned long mbps)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_MBPS_ZONES && node->mbps_zones[i]; i++)
|
|
if (node->mbps_zones[i] >= mbps)
|
|
return node->mbps_zones[i];
|
|
|
|
return node->hw->df->max_freq;
|
|
}
|
|
|
|
#define MIN_MBPS 500UL
|
|
#define HIST_PEAK_TOL 60
|
|
static unsigned long get_bw_and_set_irq(struct hwmon_node *node,
|
|
unsigned long *freq, unsigned long *ab)
|
|
{
|
|
unsigned long meas_mbps, thres, flags, req_mbps, adj_mbps;
|
|
unsigned long meas_mbps_zone;
|
|
unsigned long hist_lo_tol, hyst_lo_tol;
|
|
struct bw_hwmon *hw = node->hw;
|
|
unsigned int new_bw, io_percent;
|
|
ktime_t ts;
|
|
unsigned int ms;
|
|
|
|
spin_lock_irqsave(&irq_lock, flags);
|
|
|
|
ts = ktime_get();
|
|
ms = ktime_to_ms(ktime_sub(ts, node->prev_ts));
|
|
if (!node->sampled || ms >= node->sample_ms)
|
|
__bw_hwmon_sample_end(node->hw);
|
|
node->sampled = false;
|
|
|
|
req_mbps = meas_mbps = node->max_mbps;
|
|
node->max_mbps = 0;
|
|
|
|
hist_lo_tol = (node->hist_max_mbps * HIST_PEAK_TOL) / 100;
|
|
/* Remember historic peak in the past hist_mem decision windows. */
|
|
if (meas_mbps > node->hist_max_mbps || !node->hist_mem) {
|
|
/* If new max or no history */
|
|
node->hist_max_mbps = meas_mbps;
|
|
node->hist_mem = node->hist_memory;
|
|
} else if (meas_mbps >= hist_lo_tol) {
|
|
/*
|
|
* If subsequent peaks come close (within tolerance) to but
|
|
* less than the historic peak, then reset the history start,
|
|
* but not the peak value.
|
|
*/
|
|
node->hist_mem = node->hist_memory;
|
|
} else {
|
|
/* Count down history expiration. */
|
|
if (node->hist_mem)
|
|
node->hist_mem--;
|
|
}
|
|
|
|
/* Keep track of whether we are in low power mode consistently. */
|
|
if (meas_mbps > node->low_power_ceil_mbps)
|
|
node->above_low_power = node->low_power_delay;
|
|
if (node->above_low_power)
|
|
node->above_low_power--;
|
|
|
|
if (node->above_low_power)
|
|
io_percent = node->io_percent;
|
|
else
|
|
io_percent = node->low_power_io_percent;
|
|
|
|
/*
|
|
* The AB value that corresponds to the lowest mbps zone greater than
|
|
* or equal to the "frequency" the current measurement will pick.
|
|
* This upper limit is useful for balancing out any prediction
|
|
* mechanisms to be power friendly.
|
|
*/
|
|
meas_mbps_zone = (meas_mbps * 100) / io_percent;
|
|
meas_mbps_zone = to_mbps_zone(node, meas_mbps_zone);
|
|
meas_mbps_zone = (meas_mbps_zone * io_percent) / 100;
|
|
meas_mbps_zone = max(meas_mbps, meas_mbps_zone);
|
|
|
|
/*
|
|
* If this is a wake up due to BW increase, vote much higher BW than
|
|
* what we measure to stay ahead of increasing traffic and then set
|
|
* it up to vote for measured BW if we see down_count short sample
|
|
* windows of low traffic.
|
|
*/
|
|
if (node->wake == UP_WAKE) {
|
|
req_mbps += ((meas_mbps - node->prev_req)
|
|
* node->up_scale) / 100;
|
|
/*
|
|
* However if the measured load is less than the historic
|
|
* peak, but the over request is higher than the historic
|
|
* peak, then we could limit the over requesting to the
|
|
* historic peak.
|
|
*/
|
|
if (req_mbps > node->hist_max_mbps
|
|
&& meas_mbps < node->hist_max_mbps)
|
|
req_mbps = node->hist_max_mbps;
|
|
|
|
req_mbps = min(req_mbps, meas_mbps_zone);
|
|
}
|
|
|
|
hyst_lo_tol = (node->hyst_mbps * HIST_PEAK_TOL) / 100;
|
|
if (meas_mbps > node->hyst_mbps && meas_mbps > MIN_MBPS) {
|
|
hyst_lo_tol = (meas_mbps * HIST_PEAK_TOL) / 100;
|
|
node->hyst_peak = 0;
|
|
node->hyst_trig_win = node->hyst_length;
|
|
node->hyst_mbps = meas_mbps;
|
|
}
|
|
|
|
/*
|
|
* Check node->max_mbps to avoid double counting peaks that cause
|
|
* early termination of a window.
|
|
*/
|
|
if (meas_mbps >= hyst_lo_tol && meas_mbps > MIN_MBPS
|
|
&& !node->max_mbps) {
|
|
node->hyst_peak++;
|
|
if (node->hyst_peak >= node->hyst_trigger_count
|
|
|| node->hyst_en)
|
|
node->hyst_en = node->hyst_length;
|
|
}
|
|
|
|
if (node->hyst_trig_win)
|
|
node->hyst_trig_win--;
|
|
if (node->hyst_en)
|
|
node->hyst_en--;
|
|
|
|
if (!node->hyst_trig_win && !node->hyst_en) {
|
|
node->hyst_peak = 0;
|
|
node->hyst_mbps = 0;
|
|
}
|
|
|
|
if (node->hyst_en) {
|
|
if (meas_mbps > node->idle_mbps)
|
|
req_mbps = max(req_mbps, node->hyst_mbps);
|
|
}
|
|
|
|
/* Stretch the short sample window size, if the traffic is too low */
|
|
if (meas_mbps < MIN_MBPS) {
|
|
node->up_wake_mbps = (max(MIN_MBPS, req_mbps)
|
|
* (100 + node->up_thres)) / 100;
|
|
node->down_wake_mbps = 0;
|
|
thres = mbps_to_bytes(max(MIN_MBPS, req_mbps / 2),
|
|
node->sample_ms);
|
|
} else {
|
|
/*
|
|
* Up wake vs down wake are intentionally a percentage of
|
|
* req_mbps vs meas_mbps to make sure the over requesting
|
|
* phase is handled properly. We only want to wake up and
|
|
* reduce the vote based on the measured mbps being less than
|
|
* the previous measurement that caused the "over request".
|
|
*/
|
|
node->up_wake_mbps = (req_mbps * (100 + node->up_thres)) / 100;
|
|
node->down_wake_mbps = (meas_mbps * node->down_thres) / 100;
|
|
thres = mbps_to_bytes(meas_mbps, node->sample_ms);
|
|
}
|
|
node->down_cnt = node->down_count;
|
|
|
|
node->bytes = hw->set_thres(hw, thres);
|
|
|
|
node->wake = 0;
|
|
node->prev_req = req_mbps;
|
|
|
|
spin_unlock_irqrestore(&irq_lock, flags);
|
|
|
|
adj_mbps = req_mbps + node->guard_band_mbps;
|
|
|
|
if (adj_mbps > node->prev_ab) {
|
|
new_bw = adj_mbps;
|
|
} else {
|
|
new_bw = adj_mbps * node->decay_rate
|
|
+ node->prev_ab * (100 - node->decay_rate);
|
|
new_bw /= 100;
|
|
}
|
|
|
|
node->prev_ab = new_bw;
|
|
if (ab)
|
|
*ab = roundup(new_bw, node->bw_step);
|
|
|
|
*freq = (new_bw * 100) / io_percent;
|
|
trace_bw_hwmon_update(dev_name(node->hw->df->dev.parent),
|
|
new_bw,
|
|
*freq,
|
|
node->up_wake_mbps,
|
|
node->down_wake_mbps);
|
|
return req_mbps;
|
|
}
|
|
|
|
static struct hwmon_node *find_hwmon_node(struct devfreq *df)
|
|
{
|
|
struct hwmon_node *node, *found = NULL;
|
|
|
|
mutex_lock(&list_lock);
|
|
list_for_each_entry(node, &hwmon_list, list)
|
|
if (node->hw->dev == df->dev.parent ||
|
|
node->hw->of_node == df->dev.parent->of_node ||
|
|
(!node->hw->dev && !node->hw->of_node &&
|
|
node->gov == df->governor)) {
|
|
found = node;
|
|
break;
|
|
}
|
|
mutex_unlock(&list_lock);
|
|
|
|
return found;
|
|
}
|
|
|
|
int update_bw_hwmon(struct bw_hwmon *hwmon)
|
|
{
|
|
struct devfreq *df;
|
|
struct hwmon_node *node;
|
|
int ret;
|
|
|
|
if (!hwmon)
|
|
return -EINVAL;
|
|
df = hwmon->df;
|
|
if (!df)
|
|
return -ENODEV;
|
|
node = df->data;
|
|
if (!node)
|
|
return -ENODEV;
|
|
|
|
if (!node->mon_started)
|
|
return -EBUSY;
|
|
|
|
dev_dbg(df->dev.parent, "Got update request\n");
|
|
devfreq_monitor_stop(df);
|
|
|
|
mutex_lock(&df->lock);
|
|
ret = update_devfreq(df);
|
|
if (ret)
|
|
dev_err(df->dev.parent,
|
|
"Unable to update freq on request!\n");
|
|
mutex_unlock(&df->lock);
|
|
|
|
devfreq_monitor_start(df);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int start_monitor(struct devfreq *df, bool init)
|
|
{
|
|
struct hwmon_node *node = df->data;
|
|
struct bw_hwmon *hw = node->hw;
|
|
struct device *dev = df->dev.parent;
|
|
unsigned long mbps;
|
|
int ret;
|
|
|
|
node->prev_ts = ktime_get();
|
|
|
|
if (init) {
|
|
node->prev_ab = 0;
|
|
node->resume_freq = 0;
|
|
node->resume_ab = 0;
|
|
mbps = (df->previous_freq * node->io_percent) / 100;
|
|
ret = hw->start_hwmon(hw, mbps);
|
|
} else {
|
|
ret = hw->resume_hwmon(hw);
|
|
}
|
|
|
|
if (ret) {
|
|
dev_err(dev, "Unable to start HW monitor! (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (init)
|
|
devfreq_monitor_start(df);
|
|
else
|
|
devfreq_monitor_resume(df);
|
|
|
|
node->mon_started = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stop_monitor(struct devfreq *df, bool init)
|
|
{
|
|
struct hwmon_node *node = df->data;
|
|
struct bw_hwmon *hw = node->hw;
|
|
|
|
node->mon_started = false;
|
|
|
|
if (init) {
|
|
devfreq_monitor_stop(df);
|
|
hw->stop_hwmon(hw);
|
|
} else {
|
|
devfreq_monitor_suspend(df);
|
|
hw->suspend_hwmon(hw);
|
|
}
|
|
|
|
}
|
|
|
|
static int gov_start(struct devfreq *df)
|
|
{
|
|
int ret = 0;
|
|
struct device *dev = df->dev.parent;
|
|
struct hwmon_node *node;
|
|
struct bw_hwmon *hw;
|
|
struct devfreq_dev_status stat;
|
|
|
|
node = find_hwmon_node(df);
|
|
if (!node) {
|
|
dev_err(dev, "Unable to find HW monitor!\n");
|
|
return -ENODEV;
|
|
}
|
|
hw = node->hw;
|
|
|
|
stat.private_data = NULL;
|
|
if (df->profile->get_dev_status)
|
|
ret = df->profile->get_dev_status(df->dev.parent, &stat);
|
|
if (ret || !stat.private_data)
|
|
dev_warn(dev, "Device doesn't take AB votes!\n");
|
|
else
|
|
node->dev_ab = stat.private_data;
|
|
|
|
hw->df = df;
|
|
node->orig_data = df->data;
|
|
df->data = node;
|
|
|
|
if (start_monitor(df, true))
|
|
goto err_start;
|
|
|
|
ret = sysfs_create_group(&df->dev.kobj, node->attr_grp);
|
|
if (ret)
|
|
goto err_sysfs;
|
|
|
|
return 0;
|
|
|
|
err_sysfs:
|
|
stop_monitor(df, true);
|
|
err_start:
|
|
df->data = node->orig_data;
|
|
node->orig_data = NULL;
|
|
hw->df = NULL;
|
|
node->dev_ab = NULL;
|
|
return ret;
|
|
}
|
|
|
|
static void gov_stop(struct devfreq *df)
|
|
{
|
|
struct hwmon_node *node = df->data;
|
|
struct bw_hwmon *hw = node->hw;
|
|
|
|
sysfs_remove_group(&df->dev.kobj, node->attr_grp);
|
|
stop_monitor(df, true);
|
|
df->data = node->orig_data;
|
|
node->orig_data = NULL;
|
|
hw->df = NULL;
|
|
/*
|
|
* Not all governors know about this additional extended device
|
|
* configuration. To avoid leaving the extended configuration at a
|
|
* stale state, set it to 0 and let the next governor take it from
|
|
* there.
|
|
*/
|
|
if (node->dev_ab)
|
|
*node->dev_ab = 0;
|
|
node->dev_ab = NULL;
|
|
}
|
|
|
|
static int gov_suspend(struct devfreq *df)
|
|
{
|
|
struct hwmon_node *node = df->data;
|
|
unsigned long resume_freq = df->previous_freq;
|
|
unsigned long resume_ab = *node->dev_ab;
|
|
|
|
if (!node->hw->suspend_hwmon)
|
|
return -ENOSYS;
|
|
|
|
if (node->resume_freq) {
|
|
dev_warn(df->dev.parent, "Governor already suspended!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
stop_monitor(df, false);
|
|
|
|
mutex_lock(&df->lock);
|
|
update_devfreq(df);
|
|
mutex_unlock(&df->lock);
|
|
|
|
node->resume_freq = resume_freq;
|
|
node->resume_ab = resume_ab;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gov_resume(struct devfreq *df)
|
|
{
|
|
struct hwmon_node *node = df->data;
|
|
|
|
if (!node->hw->resume_hwmon)
|
|
return -ENOSYS;
|
|
|
|
if (!node->resume_freq) {
|
|
dev_warn(df->dev.parent, "Governor already resumed!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
mutex_lock(&df->lock);
|
|
update_devfreq(df);
|
|
mutex_unlock(&df->lock);
|
|
|
|
node->resume_freq = 0;
|
|
node->resume_ab = 0;
|
|
|
|
return start_monitor(df, false);
|
|
}
|
|
|
|
static int devfreq_bw_hwmon_get_freq(struct devfreq *df,
|
|
unsigned long *freq,
|
|
u32 *flag)
|
|
{
|
|
struct hwmon_node *node = df->data;
|
|
|
|
/* Suspend/resume sequence */
|
|
if (!node->mon_started) {
|
|
*freq = node->resume_freq;
|
|
*node->dev_ab = node->resume_ab;
|
|
return 0;
|
|
}
|
|
|
|
get_bw_and_set_irq(node, freq, node->dev_ab);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t store_throttle_adj(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct devfreq *df = to_devfreq(dev);
|
|
struct hwmon_node *node = df->data;
|
|
int ret;
|
|
unsigned int val;
|
|
|
|
if (!node->hw->set_throttle_adj)
|
|
return -ENOSYS;
|
|
|
|
ret = kstrtouint(buf, 10, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = node->hw->set_throttle_adj(node->hw, val);
|
|
|
|
if (!ret)
|
|
return count;
|
|
else
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t show_throttle_adj(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct devfreq *df = to_devfreq(dev);
|
|
struct hwmon_node *node = df->data;
|
|
unsigned int val;
|
|
|
|
if (!node->hw->get_throttle_adj)
|
|
val = 0;
|
|
else
|
|
val = node->hw->get_throttle_adj(node->hw);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", val);
|
|
}
|
|
|
|
static DEVICE_ATTR(throttle_adj, 0644, show_throttle_adj,
|
|
store_throttle_adj);
|
|
|
|
gov_attr(guard_band_mbps, 0U, 2000U);
|
|
gov_attr(decay_rate, 0U, 100U);
|
|
gov_attr(io_percent, 1U, 100U);
|
|
gov_attr(bw_step, 50U, 1000U);
|
|
gov_attr(sample_ms, 1U, 50U);
|
|
gov_attr(up_scale, 0U, 500U);
|
|
gov_attr(up_thres, 1U, 100U);
|
|
gov_attr(down_thres, 0U, 90U);
|
|
gov_attr(down_count, 0U, 90U);
|
|
gov_attr(hist_memory, 0U, 90U);
|
|
gov_attr(hyst_trigger_count, 0U, 90U);
|
|
gov_attr(hyst_length, 0U, 90U);
|
|
gov_attr(idle_mbps, 0U, 2000U);
|
|
gov_attr(low_power_ceil_mbps, 0U, 2500U);
|
|
gov_attr(low_power_io_percent, 1U, 100U);
|
|
gov_attr(low_power_delay, 1U, 60U);
|
|
gov_list_attr(mbps_zones, NUM_MBPS_ZONES, 0U, UINT_MAX);
|
|
|
|
static struct attribute *dev_attr[] = {
|
|
&dev_attr_guard_band_mbps.attr,
|
|
&dev_attr_decay_rate.attr,
|
|
&dev_attr_io_percent.attr,
|
|
&dev_attr_bw_step.attr,
|
|
&dev_attr_sample_ms.attr,
|
|
&dev_attr_up_scale.attr,
|
|
&dev_attr_up_thres.attr,
|
|
&dev_attr_down_thres.attr,
|
|
&dev_attr_down_count.attr,
|
|
&dev_attr_hist_memory.attr,
|
|
&dev_attr_hyst_trigger_count.attr,
|
|
&dev_attr_hyst_length.attr,
|
|
&dev_attr_idle_mbps.attr,
|
|
&dev_attr_low_power_ceil_mbps.attr,
|
|
&dev_attr_low_power_io_percent.attr,
|
|
&dev_attr_low_power_delay.attr,
|
|
&dev_attr_mbps_zones.attr,
|
|
&dev_attr_throttle_adj.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group dev_attr_group = {
|
|
.name = "bw_hwmon",
|
|
.attrs = dev_attr,
|
|
};
|
|
|
|
static int devfreq_bw_hwmon_ev_handler(struct devfreq *df,
|
|
unsigned int event, void *data)
|
|
{
|
|
int ret;
|
|
unsigned int sample_ms;
|
|
|
|
switch (event) {
|
|
case DEVFREQ_GOV_START:
|
|
sample_ms = df->profile->polling_ms;
|
|
sample_ms = max(MIN_MS, sample_ms);
|
|
sample_ms = min(MAX_MS, sample_ms);
|
|
df->profile->polling_ms = sample_ms;
|
|
|
|
ret = gov_start(df);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_dbg(df->dev.parent,
|
|
"Enabled dev BW HW monitor governor\n");
|
|
break;
|
|
|
|
case DEVFREQ_GOV_STOP:
|
|
gov_stop(df);
|
|
dev_dbg(df->dev.parent,
|
|
"Disabled dev BW HW monitor governor\n");
|
|
break;
|
|
|
|
case DEVFREQ_GOV_INTERVAL:
|
|
sample_ms = *(unsigned int *)data;
|
|
sample_ms = max(MIN_MS, sample_ms);
|
|
sample_ms = min(MAX_MS, sample_ms);
|
|
devfreq_interval_update(df, &sample_ms);
|
|
break;
|
|
|
|
case DEVFREQ_GOV_SUSPEND:
|
|
ret = gov_suspend(df);
|
|
if (ret) {
|
|
dev_err(df->dev.parent,
|
|
"Unable to suspend BW HW mon governor (%d)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(df->dev.parent, "Suspended BW HW mon governor\n");
|
|
break;
|
|
|
|
case DEVFREQ_GOV_RESUME:
|
|
ret = gov_resume(df);
|
|
if (ret) {
|
|
dev_err(df->dev.parent,
|
|
"Unable to resume BW HW mon governor (%d)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(df->dev.parent, "Resumed BW HW mon governor\n");
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct devfreq_governor devfreq_gov_bw_hwmon = {
|
|
.name = "bw_hwmon",
|
|
.get_target_freq = devfreq_bw_hwmon_get_freq,
|
|
.event_handler = devfreq_bw_hwmon_ev_handler,
|
|
};
|
|
|
|
int register_bw_hwmon(struct device *dev, struct bw_hwmon *hwmon)
|
|
{
|
|
int ret = 0;
|
|
struct hwmon_node *node;
|
|
struct attribute_group *attr_grp;
|
|
|
|
if (!hwmon->gov && !hwmon->dev && !hwmon->of_node)
|
|
return -EINVAL;
|
|
|
|
node = devm_kzalloc(dev, sizeof(*node), GFP_KERNEL);
|
|
if (!node) {
|
|
dev_err(dev, "Unable to register gov. Out of memory!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (hwmon->gov) {
|
|
attr_grp = devm_kzalloc(dev, sizeof(*attr_grp), GFP_KERNEL);
|
|
if (!attr_grp)
|
|
return -ENOMEM;
|
|
|
|
hwmon->gov->get_target_freq = devfreq_bw_hwmon_get_freq;
|
|
hwmon->gov->event_handler = devfreq_bw_hwmon_ev_handler;
|
|
attr_grp->name = hwmon->gov->name;
|
|
attr_grp->attrs = dev_attr;
|
|
|
|
node->gov = hwmon->gov;
|
|
node->attr_grp = attr_grp;
|
|
} else {
|
|
node->gov = &devfreq_gov_bw_hwmon;
|
|
node->attr_grp = &dev_attr_group;
|
|
}
|
|
|
|
node->guard_band_mbps = 100;
|
|
node->decay_rate = 90;
|
|
node->io_percent = 16;
|
|
node->low_power_ceil_mbps = 0;
|
|
node->low_power_io_percent = 16;
|
|
node->low_power_delay = 60;
|
|
node->bw_step = 190;
|
|
node->sample_ms = 50;
|
|
node->up_scale = 0;
|
|
node->up_thres = 10;
|
|
node->down_thres = 0;
|
|
node->down_count = 3;
|
|
node->hist_memory = 0;
|
|
node->hyst_trigger_count = 3;
|
|
node->hyst_length = 0;
|
|
node->idle_mbps = 400;
|
|
node->mbps_zones[0] = 0;
|
|
node->hw = hwmon;
|
|
|
|
mutex_lock(&list_lock);
|
|
list_add_tail(&node->list, &hwmon_list);
|
|
mutex_unlock(&list_lock);
|
|
|
|
if (hwmon->gov) {
|
|
ret = devfreq_add_governor(hwmon->gov);
|
|
} else {
|
|
mutex_lock(&state_lock);
|
|
if (!use_cnt)
|
|
ret = devfreq_add_governor(&devfreq_gov_bw_hwmon);
|
|
if (!ret)
|
|
use_cnt++;
|
|
mutex_unlock(&state_lock);
|
|
}
|
|
|
|
if (!ret)
|
|
dev_info(dev, "BW HWmon governor registered.\n");
|
|
else
|
|
dev_err(dev, "BW HWmon governor registration failed!\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
MODULE_DESCRIPTION("HW monitor based dev DDR bandwidth voting driver");
|
|
MODULE_LICENSE("GPL v2");
|