android_kernel_oneplus_msm8998/drivers/usb
Aaron Ma ae52c0d858 usb: xhci: fix uninitialized completion when USB3 port got wrong status
commit 958c0bd86075d4ef1c936998deefe1947e539240 upstream.

Realtek USB3.0 Card Reader [0bda:0328] reports wrong port status on
Cannon lake PCH USB3.1 xHCI [8086:a36d] after resume from S3,
after clear port reset it works fine.

Since this device is registered on USB3 roothub at boot,
when port status reports not superspeed, xhci_get_port_status will call
an uninitialized completion in bus_state[0].
Kernel will hang because of NULL pointer.

Restrict the USB2 resume status check in USB2 roothub to fix hang issue.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01 09:46:41 +01:00
..
atm
c67x00
chipidea usb: chipidea: Prevent unbalanced IRQ disable 2018-11-21 09:27:33 +01:00
class usb: cdc-acm: add entry for Hiro (Conexant) modem 2018-11-27 16:08:02 +01:00
common usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices 2016-09-07 08:32:39 +02:00
core usb: core: Fix hub port connection events lost 2018-12-01 09:46:33 +01:00
dwc2 usb: gadget: dwc2: fix memory leak in gadget_init() 2018-08-24 13:26:54 +02:00
dwc3 usb: dwc3: omap: fix error return code in dwc3_omap_probe() 2018-11-10 07:41:39 -08:00
early
gadget usb: gadget: storage: Fix Spectre v1 vulnerability 2018-11-10 07:41:43 -08:00
host usb: xhci: fix uninitialized completion when USB3 port got wrong status 2018-12-01 09:46:41 +01:00
image
isp1760
misc USB: misc: appledisplay: add 20" Apple Cinema Display 2018-11-27 16:08:02 +01:00
mon usb: usbmon: Read text within supplied buffer size 2018-03-18 11:17:53 +01:00
musb usb: musb: fix remote wakeup racing with suspend 2018-07-03 11:21:24 +02:00
phy usb/phy: fix PPC64 build errors in phy-fsl-usb.c 2018-09-05 09:18:34 +02:00
renesas_usbhs usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path 2018-02-28 10:17:23 +01:00
serial USB: serial: simple: add Motorola Tetra MTP6550 id 2018-10-13 09:11:33 +02:00
storage usb-storage: fix bogus hardware error messages for ATA pass-thru devices 2018-11-10 07:41:37 -08:00
usbip usbip: usbip_host: fix bad unlock balance during stub_probe() 2018-05-26 08:48:52 +02:00
wusbcore usb: wusbcore: security: cast sizeof to int for comparison 2018-10-10 08:52:05 +02:00
Kconfig
Makefile
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.