Most of these are fairly standard little fixes, a bmc150 and bmg160 patch
is to make an ABI change to indicated a specific axis in an event rather
than the generic option in the original drivers. As both of these drivers
are new in this cycle it would be ideal to push this minor change through
even though it isn't strictly a fix. A couple of other 'fixes' change
defaults for some settings on these new drivers to more intuitive calues.
Looks like some useful feedback has been coming in for this driver
since it was applied.
* IIO_EVENT_CODE_EXTRACT_DIR bit mask was wrong and has been for a while
0xCF clearly doesn't give a contiguous bitmask.
* kxcjk-1013 range setting was failing to mask out the previous value
in the register and hence was 'enable only'.
* men_z188 device id table wasn't null terminated.
* bmg160 and bmc150 both failed to correctly handling an error in mode
setting.
* bmg160 and bmc150 both had a bug in setting the event direction in the
event spec (leads to an attribute name being incorrect)
* bmg160 defaulted to an open drain output for the interrupt - as a default
this obviously only works with some interrupt chips - hence change the
default to push-pull (note this is a new driver so we aren't going to
cause any regressions with this change).
* bmc150 had an unintuitive default for the rate of change (motion detector)
so change it to 0 (new driver so change of default won't cause any
regressions).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=IPMl
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-3.18c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Third set of IIO fixes for the 3.18 cycle.
Most of these are fairly standard little fixes, a bmc150 and bmg160 patch
is to make an ABI change to indicated a specific axis in an event rather
than the generic option in the original drivers. As both of these drivers
are new in this cycle it would be ideal to push this minor change through
even though it isn't strictly a fix. A couple of other 'fixes' change
defaults for some settings on these new drivers to more intuitive calues.
Looks like some useful feedback has been coming in for this driver
since it was applied.
* IIO_EVENT_CODE_EXTRACT_DIR bit mask was wrong and has been for a while
0xCF clearly doesn't give a contiguous bitmask.
* kxcjk-1013 range setting was failing to mask out the previous value
in the register and hence was 'enable only'.
* men_z188 device id table wasn't null terminated.
* bmg160 and bmc150 both failed to correctly handling an error in mode
setting.
* bmg160 and bmc150 both had a bug in setting the event direction in the
event spec (leads to an attribute name being incorrect)
* bmg160 defaulted to an open drain output for the interrupt - as a default
this obviously only works with some interrupt chips - hence change the
default to push-pull (note this is a new driver so we aren't going to
cause any regressions with this change).
* bmc150 had an unintuitive default for the rate of change (motion detector)
so change it to 0 (new driver so change of default won't cause any
regressions).
8bb9b9a006