android_kernel_oneplus_msm8998/drivers/usb
Jia-Ju Bai 95bb041eef USB: serial: io_edgeport: fix possible sleep-in-atomic
commit c7b8f77872c73f69a16528a9eb87afefcccdc18b upstream.

According to drivers/usb/serial/io_edgeport.c, the driver may sleep
under a spinlock.
The function call path is:
edge_bulk_in_callback (acquire the spinlock)
   process_rcvd_data
     process_rcvd_status
       change_port_settings
         send_iosp_ext_cmd
           write_cmd_usb
             usb_kill_urb --> may sleep

To fix it, the redundant usb_kill_urb() is removed from the error path
after usb_submit_urb() fails.

This possible bug is found by my static analysis tool (DSAC) and checked
by my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03 17:04:30 +01:00
..
atm USB: atm: cxacru: fix blank line after declaration 2015-07-22 14:55:22 -07:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea usb: chipidea: vbus event may exist before starting gadget 2017-10-08 10:14:18 +02:00
class CDC-ACM: apply quirk for card reader 2018-02-03 17:04:30 +01:00
common usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices 2016-09-07 08:32:39 +02:00
core USB: Fix off by one in type-specific length check of BOS SSP capability 2018-01-02 20:33:27 +01:00
dwc2 usb: dwc2: fix regression on big-endian PowerPC/ARM systems 2016-07-27 09:47:28 -07:00
dwc3 usb: dwc3: replace %p with %pK 2017-07-15 11:57:45 +02:00
early
gadget usb: gadget: don't dereference g until after it has been null checked 2018-02-03 17:04:29 +01:00
host xhci: Fix ring leak in failure path of xhci_alloc_virt_device() 2018-01-17 09:35:29 +01:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc usb: misc: usb3503: make sure reset is low for at least 100us 2018-01-17 09:35:31 +01:00
mon USB: fix usbmon BUG trigger 2018-01-17 09:35:31 +01:00
musb usb: musb: ux500: Fix NULL pointer dereference at system PM 2018-01-17 09:35:28 +01:00
phy usb: phy: isp1301: Add OF device ID table 2017-12-20 10:04:52 +01:00
renesas_usbhs usb: renesas_usbhs: Fix DMAC sequence for receiving zero-length packet 2017-10-18 09:20:41 +02:00
serial USB: serial: io_edgeport: fix possible sleep-in-atomic 2018-02-03 17:04:30 +01:00
storage uas: ignore UAS for Norelsys NS1068(X) chips 2018-01-17 09:35:32 +01:00
usbip usbip: prevent leaking socket pointer address in messages 2018-01-31 12:06:12 +01:00
wusbcore USB: wusbcore: fix NULL-deref at probe 2017-03-30 09:35:17 +02:00
Kconfig
Makefile usb-host: Remove fusbh200 driver 2015-10-16 23:44:33 -07:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.