android_kernel_oneplus_msm8998/drivers/usb
Johan Hovold 3983567fba USB: serial: cypress_m8: fix interrupt-out transfer length
[ Upstream commit 56445eef55cb5904096fed7a73cf87b755dfffc7 ]

Fix interrupt-out transfer length which was being set to the
transfer-buffer length rather than the size of the outgoing packet.

Note that no slab data was leaked as the whole transfer buffer is always
cleared before each transfer.

Fixes: 9aa8dae7b1 ("cypress_m8: use usb_fill_int_urb where appropriate")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25 15:54:40 +01:00
..
atm USB: atm: cxacru: fix blank line after declaration 2015-07-22 14:55:22 -07:00
c67x00
chipidea usb: chipidea: Fix otg event handler 2019-11-25 15:54:05 +01:00
class USB: usblp: fix use-after-free on disconnect 2019-10-29 09:13:25 +01:00
common usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices 2016-09-07 08:32:39 +02:00
core USB: Skip endpoints with 0 maxpacket length 2019-11-12 19:13:28 +01:00
dwc2 usb: dwc2: Remove unnecessary kfree 2019-02-20 10:13:24 +01:00
dwc3 usb: dwc3: Fix default lpm_nyet_threshold value 2019-05-16 19:45:04 +02:00
early
gadget usb: gadget: udc: fotg210-udc: Fix a sleep-in-atomic-context bug in fotg210_get_status() 2019-11-25 15:54:29 +01:00
host xhci: Increase STS_SAVE timeout in xhci_suspend() 2019-10-17 13:40:59 -07:00
image USB: microtek: fix info-leak at probe 2019-10-17 13:41:01 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc USB: ldusb: fix control-message timeout 2019-11-06 12:09:19 +01:00
mon usb: usbmon: Read text within supplied buffer size 2018-03-18 11:17:53 +01:00
musb usb: musb: fix remote wakeup racing with suspend 2018-07-03 11:21:24 +02:00
phy usb: phy: am335x: fix race condition in _probe 2019-02-20 10:13:16 +01:00
renesas_usbhs usb: renesas_usbhs: gadget: Fix usb_ep_set_{halt,wedge}() behavior 2019-10-17 13:41:01 -07:00
serial USB: serial: cypress_m8: fix interrupt-out transfer length 2019-11-25 15:54:40 +01:00
storage UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments") 2019-11-06 12:09:18 +01:00
usbip drivers: usb: usbip: Add missing break statement to switch 2019-11-12 19:13:24 +01:00
wusbcore usb: wusbcore: security: cast sizeof to int for comparison 2018-10-10 08:52:05 +02:00
Kconfig
Makefile usb-host: Remove fusbh200 driver 2015-10-16 23:44:33 -07:00
README
usb-skeleton.c USB: usb-skeleton: fix NULL-deref on disconnect 2019-10-17 13:40:58 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.