android_kernel_oneplus_msm8998/drivers/usb
John Stultz ed5fb54799 usb: dwc2: Make sure we disconnect the gadget state
[ Upstream commit dad3f793f20fbb5c0c342f0f5a0bdf69a4d76089 ]

I had seen some odd behavior with HiKey's usb-gadget interface
that I finally seemed to have chased down. Basically every other
time I plugged in the OTG port, the gadget interface would
properly initialize. The other times, I'd get a big WARN_ON
in dwc2_hsotg_init_fifo() about the fifo_map not being clear.

Ends up if we don't disconnect the gadget state, the fifo-map
doesn't get cleared properly, which causes WARN_ON messages and
also results in the device not properly being setup as a gadget
every other time the OTG port is connected.

So this patch adds a call to dwc2_hsotg_disconnect() in the
reset path so the state is properly cleared.

With it, the gadget interface initializes properly on every
plug in.

Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: John Youn <johnyoun@synopsys.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Chen Yu <chenyu56@huawei.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22 09:23:26 +01:00
..
atm
c67x00
chipidea usb: chipidea: vbus event may exist before starting gadget 2017-10-08 10:14:18 +02:00
class CDC-ACM: apply quirk for card reader 2018-02-03 17:04:30 +01:00
common usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices 2016-09-07 08:32:39 +02:00
core usb: quirks: add control message delay for 1b1c:1b20 2018-03-18 11:17:53 +01:00
dwc2 usb: dwc2: Make sure we disconnect the gadget state 2018-03-22 09:23:26 +01:00
dwc3 usb: dwc3: gadget: Set maxpacket size for ep0 IN 2018-02-28 10:17:23 +01:00
early
gadget usb: gadget: f_fs: Fix use-after-free in ffs_fs_kill_sb() 2018-03-18 11:17:53 +01:00
host usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks() 2018-02-28 10:17:22 +01:00
image
isp1760
misc usb: ldusb: add PIDs for new CASSY devices supported by this driver 2018-02-28 10:17:23 +01:00
mon usb: usbmon: Read text within supplied buffer size 2018-03-18 11:17:53 +01:00
musb usb: musb/ux500: remove duplicate check for dma_is_compatible 2018-02-25 11:03:45 +01:00
phy usb: phy: msm add regulator dependency 2018-02-25 11:03:51 +01:00
renesas_usbhs usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path 2018-02-28 10:17:23 +01:00
serial USB: serial: simple: add Motorola Tetra driver 2018-02-03 17:04:30 +01:00
storage USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h 2018-03-18 11:17:53 +01:00
usbip usbip: keep usbip_device sockfd state in sync with tcp_socket 2018-02-25 11:03:38 +01:00
wusbcore USB: wusbcore: fix NULL-deref at probe 2017-03-30 09:35:17 +02:00
Kconfig
Makefile
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.