android_kernel_oneplus_msm8998/drivers/clk/rockchip/clk-mmc-phase.c
Shawn Lin 48337eb7a9 clk: rockchip: Prevent calculating mmc phase if clock rate is zero
[ Upstream commit 4bf59902b50012b1dddeeaa23b217d9c4956cdda ]

The MMC sample and drv clock for rockchip platforms are derived from
the bus clock output to the MMC/SDIO card. So it should never happens
that the clk rate is zero given it should inherits the clock rate from
its parent. If something goes wrong and makes the clock rate to be zero,
the calculation would be wrong but may still make the mmc tuning process
work luckily. However it makes people harder to debug when the following
data transfer is unstable.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30 07:49:14 +02:00

206 lines
5.7 KiB
C

/*
* Copyright 2014 Google, Inc
* Author: Alexandru M Stan <amstan@chromium.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include "clk.h"
struct rockchip_mmc_clock {
struct clk_hw hw;
void __iomem *reg;
int id;
int shift;
};
#define to_mmc_clock(_hw) container_of(_hw, struct rockchip_mmc_clock, hw)
#define RK3288_MMC_CLKGEN_DIV 2
static unsigned long rockchip_mmc_recalc(struct clk_hw *hw,
unsigned long parent_rate)
{
return parent_rate / RK3288_MMC_CLKGEN_DIV;
}
#define ROCKCHIP_MMC_DELAY_SEL BIT(10)
#define ROCKCHIP_MMC_DEGREE_MASK 0x3
#define ROCKCHIP_MMC_DELAYNUM_OFFSET 2
#define ROCKCHIP_MMC_DELAYNUM_MASK (0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET)
#define ROCKCHIP_MMC_INIT_STATE_RESET 0x1
#define ROCKCHIP_MMC_INIT_STATE_SHIFT 1
#define PSECS_PER_SEC 1000000000000LL
/*
* Each fine delay is between 44ps-77ps. Assume each fine delay is 60ps to
* simplify calculations. So 45degs could be anywhere between 33deg and 57.8deg.
*/
#define ROCKCHIP_MMC_DELAY_ELEMENT_PSEC 60
static int rockchip_mmc_get_phase(struct clk_hw *hw)
{
struct rockchip_mmc_clock *mmc_clock = to_mmc_clock(hw);
unsigned long rate = clk_get_rate(hw->clk);
u32 raw_value;
u16 degrees;
u32 delay_num = 0;
/* See the comment for rockchip_mmc_set_phase below */
if (!rate) {
pr_err("%s: invalid clk rate\n", __func__);
return -EINVAL;
}
raw_value = readl(mmc_clock->reg) >> (mmc_clock->shift);
degrees = (raw_value & ROCKCHIP_MMC_DEGREE_MASK) * 90;
if (raw_value & ROCKCHIP_MMC_DELAY_SEL) {
/* degrees/delaynum * 10000 */
unsigned long factor = (ROCKCHIP_MMC_DELAY_ELEMENT_PSEC / 10) *
36 * (rate / 1000000);
delay_num = (raw_value & ROCKCHIP_MMC_DELAYNUM_MASK);
delay_num >>= ROCKCHIP_MMC_DELAYNUM_OFFSET;
degrees += DIV_ROUND_CLOSEST(delay_num * factor, 10000);
}
return degrees % 360;
}
static int rockchip_mmc_set_phase(struct clk_hw *hw, int degrees)
{
struct rockchip_mmc_clock *mmc_clock = to_mmc_clock(hw);
unsigned long rate = clk_get_rate(hw->clk);
u8 nineties, remainder;
u8 delay_num;
u32 raw_value;
u32 delay;
/*
* The below calculation is based on the output clock from
* MMC host to the card, which expects the phase clock inherits
* the clock rate from its parent, namely the output clock
* provider of MMC host. However, things may go wrong if
* (1) It is orphan.
* (2) It is assigned to the wrong parent.
*
* This check help debug the case (1), which seems to be the
* most likely problem we often face and which makes it difficult
* for people to debug unstable mmc tuning results.
*/
if (!rate) {
pr_err("%s: invalid clk rate\n", __func__);
return -EINVAL;
}
nineties = degrees / 90;
remainder = (degrees % 90);
/*
* Due to the inexact nature of the "fine" delay, we might
* actually go non-monotonic. We don't go _too_ monotonic
* though, so we should be OK. Here are options of how we may
* work:
*
* Ideally we end up with:
* 1.0, 2.0, ..., 69.0, 70.0, ..., 89.0, 90.0
*
* On one extreme (if delay is actually 44ps):
* .73, 1.5, ..., 50.6, 51.3, ..., 65.3, 90.0
* The other (if delay is actually 77ps):
* 1.3, 2.6, ..., 88.6. 89.8, ..., 114.0, 90
*
* It's possible we might make a delay that is up to 25
* degrees off from what we think we're making. That's OK
* though because we should be REALLY far from any bad range.
*/
/*
* Convert to delay; do a little extra work to make sure we
* don't overflow 32-bit / 64-bit numbers.
*/
delay = 10000000; /* PSECS_PER_SEC / 10000 / 10 */
delay *= remainder;
delay = DIV_ROUND_CLOSEST(delay,
(rate / 1000) * 36 *
(ROCKCHIP_MMC_DELAY_ELEMENT_PSEC / 10));
delay_num = (u8) min_t(u32, delay, 255);
raw_value = delay_num ? ROCKCHIP_MMC_DELAY_SEL : 0;
raw_value |= delay_num << ROCKCHIP_MMC_DELAYNUM_OFFSET;
raw_value |= nineties;
writel(HIWORD_UPDATE(raw_value, 0x07ff, mmc_clock->shift), mmc_clock->reg);
pr_debug("%s->set_phase(%d) delay_nums=%u reg[0x%p]=0x%03x actual_degrees=%d\n",
clk_hw_get_name(hw), degrees, delay_num,
mmc_clock->reg, raw_value>>(mmc_clock->shift),
rockchip_mmc_get_phase(hw)
);
return 0;
}
static const struct clk_ops rockchip_mmc_clk_ops = {
.recalc_rate = rockchip_mmc_recalc,
.get_phase = rockchip_mmc_get_phase,
.set_phase = rockchip_mmc_set_phase,
};
struct clk *rockchip_clk_register_mmc(const char *name,
const char *const *parent_names, u8 num_parents,
void __iomem *reg, int shift)
{
struct clk_init_data init;
struct rockchip_mmc_clock *mmc_clock;
struct clk *clk;
mmc_clock = kmalloc(sizeof(*mmc_clock), GFP_KERNEL);
if (!mmc_clock)
return NULL;
init.name = name;
init.flags = 0;
init.num_parents = num_parents;
init.parent_names = parent_names;
init.ops = &rockchip_mmc_clk_ops;
mmc_clock->hw.init = &init;
mmc_clock->reg = reg;
mmc_clock->shift = shift;
/*
* Assert init_state to soft reset the CLKGEN
* for mmc tuning phase and degree
*/
if (mmc_clock->shift == ROCKCHIP_MMC_INIT_STATE_SHIFT)
writel(HIWORD_UPDATE(ROCKCHIP_MMC_INIT_STATE_RESET,
ROCKCHIP_MMC_INIT_STATE_RESET,
mmc_clock->shift), mmc_clock->reg);
clk = clk_register(NULL, &mmc_clock->hw);
if (IS_ERR(clk))
goto err_free;
return clk;
err_free:
kfree(mmc_clock);
return NULL;
}