Add support to early mount vendor partition so that vendor modules
can be loaded during early init.
Change-Id: I2233f6c3b8eab180631ca0a0472b586b7ec854f1
Signed-off-by: Imran Khan <kimran@codeaurora.org>
Add debugfs nodes to indicate source/sink
HDCP support and authentication state accurately
for DRM HDMI driver.
Change-Id: Ia947c97708c99f23b7b4f23bcad75529b155a42c
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add a utility function to dump HDMI core registers to
command line. This will facilitate debugging issues by
just calling this API wherever necessary.
Change-Id: I4a6727dca34edf4bb1c240adc7b93f50a7530b98
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
UFS PA errors were observed during data read operation hence Hardware
programming guide have recommended setting QSERDES_RX1_UCDR_PI_CONTROLS
register to value 0x81 which will use CDR DIV4 in all bands and fastlock.
Change-Id: I456354b346aca7abfaa4839d538c5054c3e79fbf
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Remove KP and SY countries from regdb.
CRs-Fixed: 2062687
Change-Id: I41575e415844255d48d2f9e6deca20c1dc656d3c
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
It's possible for POR to fail and endpoint not enter correct reset
state. Add a timeout when waiting for MHI state BHI transition event
during firmware download.
CRs-Fixed: 2062442
Change-Id: I6af16ec1a514d50b9e984e3fb16696d23e605ba0
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
Don't clear io pad power switch setting when 3V support is faked.
This bit has to be cleared for allowing IO pad to switch to 3V when
Vccq is really configured to 3V. But in case of faking 3V where we
configure Vccq to 1.8V only, we shouldn't clear this bit.
Change-Id: Ib1a9a2eb7189e161e22c8baf588453b3f2632eb7
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
The max20010 external buck supplies VDD_GFX for msm8996-auto
boards. Add max20010 regulator device driver to program the
necessary configuration as per the board specific requirements.
CRs-Fixed: 2062515
Change-Id: I68ad73e0c7cff1a87d218dc4677801f9e0206db6
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
The patch performs Hypervisor mapping for guaranteed memshare
client's alloted memory at boot time and prevent allocation
for clients with size zero.
CRs-Fixed: 2062478
Change-Id: I96cc7b2014693d97f11411a7b62d2c365f21caf1
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
The patch updates global variables of mdlog session
for user PD during different scenarios.
CRs-Fixed: 2058648
Change-Id: I503caddf8e9d504649ee8d81115da60267a5f560
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
GPU perfcounters gets reset after a soft reset. Currently
GPU busy stats is using previous values after a soft reset.
This might lead to invalid GPU busy calculations. Start GPU
stats from the scratch after a soft reset to get valid GPU
busy calculations.
Change-Id: Ia38c18ad59f438d724ff4710ee2b350853b3810d
Signed-off-by: Abhilash Kumar <krabhi@codeaurora.org>
Currently the sysfs nodes for receiving minimum
encryption level reside within the SDE HDMI driver.
Move the nodes to the misc hdcp driver so that they
are available for use for targets using DRM SDE driver.
Change-Id: I94daa981536e56930f7b15eb0ca7b895b9bc9c44
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add the HDCP 2.2 module for DRM HDMI.
Call the HDCP 2.2 APIs from the SDE HDMI driver and
also invoke the HDCP 2.2 ISR routine from the parent
ISR routine of the SDE HDMI driver.
Change-Id: Ib9a427e5712c827fa93b91fc3a416af61ea83745
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
HDCP 2.2 needs additional helper functions for handling
DDC transactions and interface specific calculations.
Add the necessary utility APIs and also move the necessary
ones to the HDMI utils file for better maintenance.
Change-Id: I215f04991c6ff71ec3e1db7674024e85fbc922e8
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
All sysfs nodes have been moved to the misc hdcp driver.
Make the sde hdcp 1x module interact with the misc hdcp
driver to keep the functionality of repeater topology
intact as its used by wi-fi display userspace module.
Change-Id: Iecf404330695369c17e4afeff864eb6d7b92e372
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add device node for the MSM HDCP driver which manages
communication between HLOS and TZ for HDCP related
operations.
Change-Id: Iecb4c86ae37ddf7cbc84f962895bbe6e1973b989
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Currently the hdcp lib doesn't have a context and
just acts as a lib for HDCP compliant interfaces like
HDMI and Display Port.
Make this lib a standalone driver capable of supporting
sysfs nodes to make communication with other modules
like TZ easier and less roundabout.
Change-Id: If693a9d4c8561e6d8c94e236a0fc108c8a65c05e
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
The OSM clock driver currently enables ACD for the silver and
gold clusters regardless of whether they've been brought up or
not. ACD requires the cluster PLLs to be running for initialization,
a requirement which would not be met if the cluster hasn't been
brought online.
Tie the ACD initialization sequence with enabling OSM for that
cluster.
Change-Id: Ib393dd339f8095029c9703fbe67897d0a491eced
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
Use per CPU NOCB threads to process RCU callbacks, rather than processing
the callbacks in softirq context. Processing large number of callbacks
in softirq context may result in delayed execution of other softirqs, so
remove processing of callbacks from softirq context.
Change-Id: I361221ea302c84d626122538d383f549ea9cea0d
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
64K page pool is currently unused because it doesn't have
any reserved pages and also dynamic page allocation for
this pool is disabled.
Add qcom,mempool-allocate property to allow pool to grow
dynamically and hence being used.
Change-Id: I4036032758ec12500854562d6a92d73742952dcb
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
