Enable BA and adv7481 drivers in MSM8996 auto defconfig.
CRs-Fixed: 1021381
Change-Id: Idb3d9864f33a01477ac384b0f3bef05241458268
Signed-off-by: Shiju Mathew <shijum@codeaurora.org>
Update printk format from %p to %pK in msm_ba driver
to hide exposed kernel pointers.
CRs-Fixed: 2036994
Change-Id: I8f9290670888a0b351339990f0dc2fa4fcc78b26
Signed-off-by: Shiju Mathew <shijum@codeaurora.org>
On APQ8096 Auto ADP Lite platform, it only has two displays,
native HDMI and one DSI-HDMI display through ADV7533 bridge
chip. The secondary ADV7533 instance needs to be disabled.
Change-Id: Ibae5c1561ec9f6890f818eeef185dfcf0bc1a62d
Signed-off-by: Jin Li <jinl@codeaurora.org>
This change adds the HDCP 1x module for MSM DRM
driver and also hooks it up with SDE HDMI driver.
Change-Id: Iaf53c398254f6838a1d3cae610e069c5dbe18138
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Defines the non-removable property for UFS device node.
This basically lets the driver know that UFS is the boot
device.
Change-Id: I11df8441385910fdab7595a96a5deb24c7ca833e
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
If host driver fails to send WMI_VDEV_DOWN_CMDID, firmware will drop
further packets as vdev TX PAUSE reset is done as part of VDEV_DOWN.
Send vdev down to firmware if STA fails to associate.
CRs-Fixed: 2061161
Change-Id: Ie26645389dcb839758ff6aa55812172beeccc171
Signed-off-by: Ashutosh Kumar <askuma@codeaurora.org>
There is still one ADV7535 instance on MSM8996Pro Auto CDP lite
platform, which connects DSI0 interface to HDMI.
Change-Id: I1efe7484d6f4eb1956c95689420b06b40278588e
Signed-off-by: Jin Li <jinl@codeaurora.org>
Add useful helper functions to the DRM HDMI driver
to be used later when HDCP functionality gets added.
Also add and initialize necessary members to the
SDE HDMI controller to facilitate easier integration
of DRM HDCP module.
Change-Id: I699f6685327e674a871a404fe5cf3adebe823d46
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Peer creation in firmware fails if last peer deletion is still
in progress.
Wait for peer delete response from firmware after deleting peer
from host driver.
CRs-Fixed: 2047126
Change-Id: I9eb01393d9cd3dd82f2084262c250081f2076b46
Signed-off-by: Ashutosh Kumar <askuma@codeaurora.org>
Separate out the DRM HDMI utility functions into a separate
module.
Make the DRM HDMI utility functions support self retry where
they shall try for an arbitrary number of times on failure
otherwise let the client call the API to retry the number of
times as warranted.
Add a SDE HDMI utility file which shall invoke the upstream
functions in a manner as required to maintain the functionality
of legacy drivers.
Change-Id: I64af3f997a16b2d9358ea867585aa12772d22599
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add support to parse the HDMI TX version and
HDCP support from the HDMI and QFPROM registers.
This information is used to decide which HDCP driver
module is to be initialized at boot time.
Change-Id: Ib598f3867f1cd2ef9adb7503c5907cbb1e4ba758
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Update the minimum frequency restriction value and maximum frequency
limit value to the correct nominal frequency 1.056 GHz and 1.2096 GHz
respectively, as per the updated frequency plan of msm8996pro.
Change-Id: I725351c064f0211f95af4b4dd708b62360331282
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Without this fix the MMC may incorrectly set the CAPS for the SD card.
Change-Id: Ia4be2e78453663818cfd18deb9a590ec80423bca
Signed-off-by: Bao D. Nguyen <nguyenb@codeaurora.org>
For V4L2_CID_MPEG_VIDC_VIDEO_PICTYPE_DEC_MODE ioctl the valid
ctrl values are V4L2_MPEG_VIDC_VIDEO_PICTYPE_DECODE_ON and
V4L2_MPEG_VIDC_VIDEO_PICTYPE_DECODE_OFF. But for
V4L2_MPEG_VIDC_VIDEO_PICTYPE_DECODE_OFF case
we are sending wrong enable_picture.picture_type value. We are
also oring HAL_PICTURE_IDR, whereas only
HAL_PICTURE_I | HAL_PICTURE_P | HAL_PICTURE_B should be sent.
Change-Id: I96103d068b3e6e5f23da07d9a4c20e92ed55557c
Signed-off-by: Praveen Kumar Dwivedi <pkd@codeaurora.org>
Fix the access to ipacm_client array.
Change-Id: I0e6c026a4f6eb0bc21f4e07cb301e21f78103f33
CRs-Fixed: 2024177
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Glink_ssr channel calls subsystem_restart when remote side does not
responds. This leads to system crash if remote side is already in
shutdown state.
Call to subsystem_restart is removed from glink_ssr client.
CRs-Fixed: 2061085
Change-Id: I0df382950d34d8c8d4e2bc1cbbe5edef1d4135c1
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
Reset for qos rate of xprt is not done duering SSR, this leads to
exhaustion of qos bandwidth when multiple SSR happens.
Reset qos rate of xprt to zero when link goes down.
CRs-Fixed: 2061061
Change-Id: Ibabca5584b01eb93a5b7fcc8a5304136ef400ba0
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
Assert the device upon send command failure
after reaching maximum retries.
Change-Id: I154eda0697ec190662dc16edbe09e2213b4a0bae
Acked-by: Ashok Vuyyuru <avuyyuru@qti.qualcomm.com>
Acked-by: Mohammed Javid <mjavid@qti.qualcomm.com>
Signed-off-by: Utkarsh Saxena <usaxena@codeaurora.org>
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
IPI's from the victim cpu are not handled in dev_cpu_callback.
So these pending IPI's would be sent to the remote cpu only when
NET_RX is scheduled on the victim cpu and since this trigger is
unpredictable it would result in packet latencies on the remote cpu.
This patch add support to send the pending ipi's of victim cpu.
Change-Id: I6e688bf0d09a952468eec18f80ce6b21bf370ef1
Signed-off-by: Ashwanth Goli <ashwanth@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refine the code change for this changeID:
I335a046a886ac3ce35cf96eb71231bfe75d33c60
CRs-Fixed: 2058348
Change-Id: I9a734c8bed284870562ff2d096e7316328f37e02
Signed-off-by: Paul Zhang <paulz@codeaurora.org>
With certain senarios such as error FATAL, WBOG Bite in modem
WLAN hardware is still alive, while trying to collect the dump
platform driver is removing the MSA permissions from MSS
and WLAN Hardware to HLOS, at the same time if WLAN Hardware
is trying to access the MSA region which results into SNOC error
To avoid such senarios instead of removing MSS and WLAN permissions
MSA is assigned HLOS permissions as well and once the ramdump is collected
HLOS permissions will be removed.
Change-Id: Ic71e0fa8c064fd70dad9958187244909cbb80c0a
CRs-fixed: 2048531
Signed-off-by: Anurag Chouhan <achouhan@qti.qualcomm.com>
On qcom platforms, bootdevice is the primary storage
device. The regulators to this device are left ON by
the bootloaders. Detecting further in the init sequence
that UFS is not the bootdevice entails turning-off of
these regulators without sending PON. This is bad for
the underlying storage device.
Change-Id: I7e9231f0bcf90d8f329146ae2d831bbb5ef8190e
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
When calling smmu mapping, if iova is specified directly by user, not
allocated dynamically in dma-mapping.c, smmu driver needs to provide
support for this. This is needed in early display case. In this scenario,
LK has set physical memory to display hardware for fetching, so if iova
is not explicitly specified in kernel, but instead dynamically produced
by "alloc_iova" in dma-mapping.c, display hardware has no chance to know
this new iova, then smmu fault will happen if enabling the iommu stage-1
translation.
To fix this smmu fault problem, add re-routing to the right path when
iova specified by user is not 0 in smmu map function.
Change-Id: I555fe7ae44464f25245d2d0a6740a2411a8624ba
Signed-off-by: Guchun Chen <guchunc@codeaurora.org>
Fix the number accuracy when convert backlight to brightness.
CRs-Fixed: 2054751
Change-Id: I5d30b65e795ad84d2ba897a9d5be2a8bb36f32eb
Signed-off-by: Xu Yang <yangxu@codeaurora.org>
Most VGA dongles expect the source to use a fixed NVID value of
0x8000 even though the source may be operating in a synchronous
clocking mode. Using any other values for NVID may result in
no display on the attached VGA sink. Add support for this by
calculating the correct MVID based on the fixed NVID value.
CRs-Fixed: 1095718
Change-Id: Icfef570c8584a51342015a9981b778436edaf84a
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
This change increases the max command logging capability.
It also adds cmd log print if pwr ctrl failure detected.
Finally, it changes function name ufshcd_cmd_log_print to
ufshchd_print_cmd_log to align with the naming of other
ufshcd debug print functions.
Change-Id: Ia407b239a0e231c353cccf7e6acf87a5f73d7bd8
Signed-off-by: Can Guo <cang@codeaurora.org>
Hflip is not supported on cursor pipes as there
is no flip buffer in the hardware. Invalidate
any commit request for cursor hflip.
Change-Id: I4b0ad28caffb75a4bd5a928a90daa6aa59f51848
Signed-off-by: Animesh Kishore <animeshk@codeaurora.org>
