I don't see why the server should stop responding, or that we should just
give up if it does. Wait forever when enabling/disabling the visornic
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I don't see why serverdown should be async on a workqueue. Just make it
synchronous, and remove some code in the process
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theres a lot of code duplication going on in visornic_serverdown_complete.
We should just be able to send it through the dev_close path and have it
do the right things.
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Its possible to overwrite the old task pointer in visornic_resume. Add a
check to guard against that and a warning if we find that its already
running
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the has_stopped completion as theres already one available
internally.
Correct the while loops
Remove the while loop in drain_queue as it already exists in the top level
loop
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we can't fit an skb into a frag array, linaraize it so we don't have to
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We precheck that we have enough space in an iochannel prior to writing to
it when we send in a fragmented skb. Given that there is no recovery from
this condition that I can see, turn it into a BUG halt
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One call site for visor_copy_fragsinfo_from_skb was checking for an rc of
-1, but thhe function doesn't return that, it returns -errno. Correct it
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As pointed out in a recent review, the num_visornic_open array didn't do
anything useful, and it exposed a potential race in the visornic code that
could arise while taking down a net interface while reading from the
debugfs files. Fix that by removing the array entirely, and just iterating
over all the registered netdevs in a given namespace, filtering on them
having visornic ops (to identify which are ours), and having their queues
not be stopped (identifying that they are up). This should prevent any oops
conditions happening due to changing state in that array, and save us a
bunch of code too.
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Repaced calls to htons and memcpy with a single call to put_unaligned_be16
to fix the following sparse warning:
drivers/staging/rtl8723au/core/rtw_recv.c:1557:21: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8723au/core/rtw_recv.c:1557:21: expected unsigned short [unsigned] [assigned] [usertype] len
drivers/staging/rtl8723au/core/rtw_recv.c:1557:21: got restricted __be16 [usertype] <noident>
Signed-off-by: Steve Pennington <sgpenn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use dma_get_sgtable rather than dma_common_get_sgtable so a device's
dma_ops aren't bypassed. This is essential in situations where a device
uses an IOMMU and the physical memory is not contiguous (as the common
function assumes).
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
update TODO list to provide more detail on remaining work
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pointer math here was totally wrong so we were reading nonsense
information from beyond the end of the buffer. It could lead to an oops
if that memory wasn't mapped.
The "pReasonCode" pointer is assigned but never used so I deleted it.
With-Fix-From: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bool Reval is set to match the value of bHalfWirelessN24GMode just to
this. The value can be returned directly. Removing uneeded bool.
Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Franks Klaver <fransklaver@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch complains because "delba" is a pointer to struct
rtl_80211_hdr_3addr so the "delba += sizeof(struct rtl_80211_hdr_3addr);"
is clearly wrong. We are reading nonsense data from beyond the end of
the buffer and could oops if that memory isn't mapped.
It turns out the next two statements are also wrong. We should delete
the += sizeof() statement and "delba+2" should be "&delba->payload[2]".
"pReasonCode" isn't used so I deleted that.
With-Fix-From: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Success and error path was mixed. Separate them by directly returning 0
from the success path. In the process remove the variable which became
unused.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check for kzalloc failure and directly return from the error patch thus
simplifying the success path.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Directly return NULL instead of using another label and goto.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_HCI_INTF_C_ was only defined here but not being used anywhere.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix up "line over 80 characters" warning found by the checkpatch.pl script.
Signed-off-by: Antoine BLIN <antoine.blin@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixed checkpatch.pl error:
ERROR: return is not a function, parentheses are not needed
Signed-off-by: Aaron Ouellette <aouellette2016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
urb->interval is deprecated and thus I've changed the driver
that it now always assumes interval=1 which means every frame
in USB 1.1 and every uframe in USB 2.0. However we still need
to have different sampling rates which are still multiples
of the interval which is now transmitted to the firmware.
The firmware transmits either zero length packets or none every (u)frame.
This is checked in the completion handler and any packet
at zero length is discarded so that comedi again sees the data
coming in at the interval specified. This also then gives the ADC
the necessary time to convert. For example 16 channels require
about 700us and in this period no packet could be transmitted.
In this case this is padded up to 1ms so that we have then 7 zero
length packets and one packet with the ADC data.
Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changed my e-mail address to mail@berndporr.me.uk. The old one
is no longer used.
Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device is limited to 32 bit address space.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Should be __le16 and do and correct endian conversion.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
variable is assigned a value that is never used.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable is assigned a value that is never used.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skb_dma flips from 0 to the contents buf_dma.
This is nolonger necessary so use buf_dma directly
and remove skb_dma altogether.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When pTDInfo->skb_dma not equal to pTDInfo->buf_dma, pTDInfo->skb_dma
equals zero.
as mentioned in comment pre-allocated buf_dma can't be unmapped
so remove dead code.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VIAWET_DEBUG is never defined so DBG_PORT80 is empty and never used.
Remove both macros.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VIAWET_DEBUG is not defined so macro is empty.
Remove the macro.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
obd_device_list_sops and obd_device_list_fops are not referenced
outside of linux-module.c, and in the general use case
struct file_operations and struct seq_operations should be a const
object, so make them static and const.
This patch fixes the following sparse warnings:
WARNING: struct seq_operations should normally be const
WARNING: struct file_operations should normally be const
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
target_send_reply_msg function is not referenced outside of ldlm_lib.c
file, so make it static.
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a static modifier to two functions that have no
separate declaration and are only used within the file they are
defined in. This problem was reported by sparse.
Signed-off-by: Kolbeinn Karlsson <kk752@cornell.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two fairly simple fixes: one is a change that causes us to have a very low
queue depth leading to performance issues and the other is a null deref
occasionally in tapes thanks to use after put.
Signed-off-by: James Bottomley <JBottomley@Odin.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJVq2/DAAoJEDeqqVYsXL0MhqoH/2ZlycWVQ2ZQyC9k2UWjAS7t
By0ufRZKeaxgwriVWZqTCE3QHfqqeR5tNNSvk26k+CJTS6nyVGX+g8cxLQJf1gey
DyAi9za+5P5SwYFuJxzULyZddTyeshoZplVvRwjd1/gnRUJXybuO+HRkYzaROd5e
7snX56jGt1MzpmIrO2wln24pFLVfdC5JivzUcXgYecHD/XZuzOEdZE1dCxONXy27
rTeqYayIGLFo7vhSt9J9ViF0QiU6ahCKmQ/TDsv3Sq1zg228E7DAmlzVAo2NCwLM
gelTRHRdO4rwwkehZH8QIdUI77MzgmwQIU4nZp3FBG9SWrIEPHaRpiDxCHr3UE0=
=bfE2
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fairly simple fixes: one is a change that causes us to have a very
low queue depth leading to performance issues and the other is a null
deref occasionally in tapes thanks to use after put"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fix host max depth checking for the 'queue_depth' sysfs interface
st: null pointer dereference panic caused by use after kref_put by st_open
Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes for 4.2.
Things are looking quite decent at this stage but the recent work on
the FPU support took its toll:
- fix an incorrect overly restrictive ifdef
- select O32 64-bit FP support for O32 binary compatibility
- remove workarounds for Sibyte SB1250 Pass1 parts. There are rare
fixing the workarounds is not worth the effort.
- patch up an outdated and now incorrect comment"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU
MIPS: SB1: Remove support for Pass 1 parts.
MIPS: Require O32 FP64 support for MIPS64 with O32 compat
MIPS: asm-offset.c: Patch up various comments refering to the old filename.
Pull parisc fix from Helge Deller:
"A memory leak fix from Christophe Jaillet which was introduced with
kernel 4.0 and which leads to kernel crashes on parisc after 1-3 days"
* 'parisc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: mm: Fix a memory leak related to pmd not attached to the pgd
