During soundcard deregistration, free_chmap() is called as part of
pcm_free. This only frees downmix kcontrol as pcm has reference
only to downmix kcontrol followed by freeing of pcm pointer. The
other two kcontrol are freed as part of snd_ctl_remove(). However,
while freeing other two kcontrols, pcm_usr_ctl_private_free()
accesses pcm->streams which are already freed causing crash.
Fix is to add pan/scale & downmix controls as platform controls
instead of user control.
Change-Id: Ib2890122d079201e02c4b7839694d2e7618037b7
Signed-off-by: Varun Balaraj <varunb@codeaurora.org>
ION page pool and cma shrinkers return the total pooled
memory instead of the freed. This can result in an early
exit of ION page pool shrinker thus giving back less memory
to the system. For cma shrinker this change doesn't have an
effect since the callers of shrink_slab currently ignores
the return value.
Change-Id: I0b3727807d9a5f020623766d27da360d077395f3
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Sde client customization is disabled by previous commit which
is propagated from other branch. After disabling this, 4K display
on HDMI can not be up. This is because when creating drm plane in kernel,
sde client customization will directly set possible_crtcs per plane
reporting to user space. When disabling it, user space's sdm strategy
could not get and assign correct pipes for 4K display.
Change-Id: Ie6a870c352533060f7c810bdb5c99b7c1534117d
CRs-fixed: 2107328
Signed-off-by: Guchun Chen <guchunc@codeaurora.org>
This patch disables Rx and Tx engine properly while going to suspend or
shutdown. There are chances when BT SOC or client is going bad and
disrupts the UART SW state machine.
1.Do not allow double resource_vote and hence pipe connect at port open.
2.While going to suspend, close the HW resources forcibly to prevent
UART from going bad for the subsequent resume cycle.
3.Stop Rx engine gracefully even if clocks are off to obey the framework.
4.During resource unvote, if runtime PM is disabled then go for forced
suspend.
5.In case of fatal error, stop further IPC logging.
6.Add relevant log if the Rx pipe is not empty at the time disconnecting.
7.Prevent Rx byte entering in case of back to back loopback test, as
this causes data mismatch.
8.Add the logs correctly just after reading the status instead doing it
later which doesn't get logged in case of any failure.
Change-Id: I9426e9ae8c5b07d74e95ec37651ece0d46928104
Signed-off-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
Pagetable pgd is allocated in arm_smmu_init_domain_context and is freed in
arm_smmu_domain_free. Client can attach/detach domain without freeing the
same. This causes memory leak. This was introduced with
commit fe676929a9 ("iommu/arm-smmu: fix a DOMAIN_ATTR_DYNAMIC memory
leak")
Free io pgtables in arm_smmu_destroy_domain_context, which is invoked at
the time of domain detach.
Change-Id: Ib53e4efdd8dca33437596f3f0ccaa8ccaae79ca0
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
Disable USB IRQs after high duty cycle IRQ triggered and re-enable
them in the delay worker. This helps to avoid the high duty cycle
IRQ storming.
CRs-Fixed: 2094725
Change-Id: Iba22a7402692b5ee5f738cc17ed9c214f6014ac0
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Currently the driver skips invoking adc api's if usb is not
present i.e. vbus has fallen below 3.3V.
This presence check is not required for the vbus. Skip that
check.
Change-Id: I4a2dd91109a308b553b7407618ee8f3221127f61
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
The export of save_stack_trace_tsk() was previously backported to
msm-4.9, without a backported flag to detect support. Define a new
backport flag, so kernel modules can use this function when it is
exported.
Change-Id: Iec65e6f9fed0a9bf686f5e5c8ba4f59691eb1ee0
CRs-Fixed: 2105458
Signed-off-by: Dustin Brown <dustinb@codeaurora.org>
Dfps info is calculated for a specific msm part and needs to be
used for the same. Add a chip serial number for the dfps info so
that the PLL trim codes are used for the same msm part on which
they are generated.
Change-Id: I6f1e519c1e9278b35dfbdf3d9ba4a2ed0e1a6a78
Signed-off-by: Ashish Garg <ashigarg@codeaurora.org>
Max ASM session upperbound condition is corrected to support
8 interactive plus a primary streams playback.
Change-Id: I5ec29c70941f52af020a64cc58bf10be52354f1b
Signed-off-by: Varun Balaraj <varunb@codeaurora.org>
Add laser LED device for msm8998 MTP to support
depth sensor.
Change-Id: I8603540d56adbc0d0d3ee41959f7e235dc459a8d
Signed-off-by: Vijay kumar Tumati <vtumati@codeaurora.org>
Prevent deadlock between tasklet and delete_stream by stopping
irq during delete_stream.
Change-Id: I4aba47b5cab2722c352139f793b75d7c86cd49d8
CRs-fixed: 2076578
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
Currently the driver moves FCC to PMI as it steps down
from SMB. Instead we should step down just the SMB.
Change-Id: I7ad9ca4364a44bacb539f8b045cf97f7945155f5
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Currently the code only waits 100mS between steps. The hardware
could take longer to deglitch its signals and status. Extend the
wait to 500mS.
Change-Id: I4a037f85f43bc670c5a357e4ecb46962b0d33598
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Update max tx power of country BZ/IN/KN/PA/TT/UZ/VE
Update max bandwidth of country CA
Add country GI/IQ
Remove channel 14 of country JP
Change-Id: Iacbb07b222d1c15e9109d8bbfac797fd889444a0
CRs-Fixed: 2094357
Signed-off-by: Will Huang <wilhuang@codeaurora.org>
Update upper bound of 5GHz channels for country MY from 5815 to 5835
Change-Id: Ib11cfa97316b90bc4ffb50420c84df187ff80a7f
CRs-Fixed: 2103994
Signed-off-by: Will Huang <wilhuang@codeaurora.org>
Signed-off-by: Ashish Kumar Dhanotiya <adhanoti@codeaurora.org>
Adding new submodule for lased LED and APIs to
support register WRITE/READ operations.
Change-Id: I7e6dc27a01985c223be791b16e6b7da4bbc1be74
Signed-off-by: Vijay kumar Tumati <vtumati@codeaurora.org>
In most code paths involving cgroup migration cgroup_threadgroup_rwsem
is taken. There are two exceptions:
- remove_tasks_in_empty_cpuset calls cgroup_transfer_tasks
- vhost_attach_cgroups_work calls cgroup_attach_task_all
With cgroup_threadgroup_rwsem held it is guaranteed that cgroup_post_fork
and copy_cgroup_ns will reference the same css_set from the process calling
fork.
Without such an interlock there process after fork could reference one
css_set from it's new cgroup namespace and another css_set from
task->cgroups, which semantically is nonsensical.
Change-Id: Iadec82bd07a43bf7cefcf8fc17603700fd4895c3
Cc: stable@vger.kernel.org
Fixes: a79a908fd2b0 ("cgroup: introduce cgroup namespaces")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Git-commit: eedd0f4cbf5f3b81e82649832091e1d9d53f0709
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
PCIe WAKE for msm8998 is set to pull-down. This configuration
can cause the wake signal to be trigerred in some scenarios.
WAKE gpio should be always pull-up for preventing false wakes.
Change-Id: I893ef8908437d2118238c6fd45809703b1f5e3bb
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Currently, ESR extraction control is configured from two paths.
First is invoked when Qnovo is enabled or disabled. Second is
invoked when the pulse train is done and ESR measurement is
requested. When the latter is run, there is a sleep time of 1.5
seconds that is essential for allowing FG to do ESR measurement.
However in that time window, if Qnovo is disabled for some reason
then ESR extraction control will be kept disabled unexpectedly.
Fix this by protecting both the paths using a mutex lock as well
as checking for qnovo enable status before disabling ESR
extraction control after measuring ESR.
Change-Id: Ib93539071724a1ce59d198074854a8a9c5fd3ab3
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
With support for new AKM suites (example FILS-SHA256), the KEK length
can now be more than NL80211_KEK_LEN and the KCK length can be zero.
Add changes in cfg80211 to specify the length of KEK, and make KCK
optional. Make NL80211_REKEY_DATA_KEK as NLA_BINARY to enforce a maximum
length check.
Also add macro CFG80211_REKEY_DATA_KEK_LEN to indicate support for
including KEK length in rekey data.
CRs-Fixed: 2087759
Change-Id: Ica8dbb8614e0a9c3905e125b4a5254e43821984e
Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org>
Pop is observed after we start playback on hph.
This is because we do not enable both compander
channels at the same time which is not according to
qcrg. Amplitude of pop gets reduced after
corresponding change is made.
Also kernel panic is observed during SSR. This is because
DSP does not get sufficient time to bring up LPASS after SSR.
An increase in ADSP Ready timeout resolves the issue.
CRs-Fixed: 2101404
Change-Id: Iaea0f5060cdd87754e074ecbba18b5045cd4351a
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
During system suspend/resume or WLAN interface up/down
by the network subsystem the ath10k SNOC WLAN driver
configure WLAN enable/disable cmd with the WLAN firmware
over QMI interface. The WLAN enable/disable cmd configuration
with the WLAN firmware during system suspend is preventing
the system suspend.
Register PM event notifier for the ath10k SNOC platform
driver and synchronize the WLAN HIF power down/up
configuration, WLAN enable/disable cmd configuration
with WLAN firmware according to the system power state.
CRs-Fixed: 2110607
Change-Id: I5eeda967ae11c21ab5164c18b3e0a3bf668c916a
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Use NL80211_CMD_UPDATE_CONNECT_PARAMS to update new ERP information,
Association IEs and the Authentication type to driver / firmware which
will be used in subsequent roamings.
CRs-Fixed: 2087764
Change-Id: Ic296b66a39b9ceb8de992a9f37112439389946a2
Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org>
In DRM driver gpu clock don't change. override the initial gpu clock to
maximal value to ensure the performance in auto system.
Change-Id: I95515aedfb7b6e462d693cc5ae945ac21fcba7b8
Signed-off-by: Kasin Li <donglil@codeaurora.org>
Synchronize camera_v4l2_open and camera_v4l2_close to avoid use
after free.
Change-Id: I4055f00ff30408cc0469015b3e49d877632726bf
CRs-fixed: 2048964
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
Currently driver is enabling hsphy_irq and ssphy_irq at the end
of dwc3_msm_suspend() without any spinlock/mutex protection. But
if it happens that hsphy_irq or ssphy_irq gets fired right after
enablement of irqs, there is a chance that we might see warnings
related to unbalanced irq enable. This could happen due to flag
is not yet set to indicate phy irqs enabled in suspend(). This
might cause phy irq left enabled after resume and could cause
crash due to unclocked access in host mode. Fix the unbalance irq
enable by having mutex protection and also extend mutex protection
for dwc3_msm_suspend() and dwc3_msm_resume().
Change-Id: I8c2d26f82feb235add64305c1d0e5b686993e9e9
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
dchdr->dlen is a short variable controlled by the user-provided data
(a string). If the value is negative, the condition does not pass
and loop continues, also increasing the value of "len". As a result
buffer overflow and overwrite occurs.
Change-Id: I5eacec446c9a8b5b82fc3bc6d1281303f336d4de
Signed-off-by: Ashish Garg <ashigarg@codeaurora.org>
Currently there is a possibility of NULL pointer
dereference issue due to NULL pointers checks are
missing for mask info. The patch fixes the issue by
adding NULL pointer checks.
CRs-Fixed: 2108911
Change-Id: I097aeacc90c8d88034bf799ee4e398ddda5e23f1
Signed-off-by: Hardik Arya <harya@codeaurora.org>
APPS interact with MPSS through 32 bit register interface.
Set dma mask for 32 bit so that mba and mdt memory are allocated
from 32 bit physical address range.
Change-Id: I623f00097d464b1bdd8f609e2d6c9a126f4bea4d
Signed-off-by: Arun KS <arunks@codeaurora.org>
mmc_blk_cmdq_part_switch always returned 0 even in case of
failures as errors are not handled in this function.
We need to un-halt cmdq in case it's in halt state when
mmc_switch fails. This change adds error handling code and
returns error in case of any failure.
Change-Id: Icd7ec4b7b53fc56d39dbcea195ae44bf08de17e5
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
In case of any UFS error or aborts, read TX and RX
FSM states which can be used for debugging purpose.
Change-Id: I24a989a9e1b07ba904ec639e26736a01769f0593
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
