[ Upstream commit 53d0f8dbde89cf6c862c7a62e00c6123e02cba41 ]
The error handling in fd_probe_drives() doesn't clean up at all. Fix it
up in preparation for converting to blk-mq. While we're here, get rid of
the commented out amiga_floppy_remove().
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b995f4eec34745f6cb20d66d5277611f0b3c3fa ]
In _scif_prog_signal(), the boolean variable 'x100' is used to indicate
whether the MIC Coprocessor is X100. If 'x100' is true, the status
descriptor will be used to write the value to the destination. Otherwise, a
DMA pool will be allocated for this purpose. Specifically, if the DMA pool
is allocated successfully, two memory addresses will be returned. One is
for the CPU and the other is for the device to access the DMA pool. The
former is stored to the variable 'status' and the latter is stored to the
variable 'src'. After the allocation, the address in 'src' is saved to
'status->src_dma_addr', which is actually in the DMA pool, and 'src' is
then modified.
Later on, if an error occurs, the execution flow will transfer to the label
'dma_fail', which will check 'x100' and free up the allocated DMA pool if
'x100' is false. The point here is that 'status->src_dma_addr' is used for
freeing up the DMA pool. As mentioned before, 'status->src_dma_addr' is in
the DMA pool. And thus, the device is able to modify this data. This can
potentially cause failures when freeing up the DMA pool because of the
modified device address.
This patch avoids the above issue by using the variable 'src' (with
necessary calculation) to free up the DMA pool.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 655603de68469adaff16842ac17a5aec9c9ce89b ]
The sysfs handler should return the number of bytes consumed, which in the
case of a successful write is the entire buffer. Also fix a bug where
param.data_len was being set to (count - (2 * sizeof(u32))) instead of just
(count - sizeof(u32)). The latter is correct because we skip over the
leading u32 which is our param.type, but we were also incorrectly
subtracting sizeof(u32) on the line where we were actually setting
param.data_len:
param.data_len = count - sizeof(u32);
This meant that for our example event.kernel_software_watchdog with total
length 10 bytes, param.data_len was just 2 prior to this change.
To test, successfully append an event to the log with gsmi sysfs.
This sample event is for a "Kernel Software Watchdog"
> xxd -g 1 event.kernel_software_watchdog
0000000: 01 00 00 00 ad de 06 00 00 00
> cat event.kernel_software_watchdog > /sys/firmware/gsmi/append_to_eventlog
> mosys eventlog list | tail -1
14 | 2012-06-25 10:14:14 | Kernl Event | Software Watchdog
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
[zwisler: updated changelog for 2nd bug fix and upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 315bed43fea532650933e7bba316a7601d439edf ]
In btrfs_search_old_slot get_old_root is always used with the assumption
it cannot fail. However, this is not true in rare circumstance it can
fail and return null. This will lead to null point dereference when the
header is read. Fix this by checking the return value and properly
handling NULL by setting ret to -EIO and returning gracefully.
Coverity-id: 1087503
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f38a9774ddde9d79b3487dd888edd8b8623552af ]
when msdc_cmd_is_ready return fail, the req_timeout work has not been
inited and cancel_delayed_work() will return false, then, the request
return directly and never call mmc_request_done().
so need call mod_delayed_work() before msdc_cmd_is_ready()
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f34c6e6257aa477cdfe7e9bbbecd3c5648ecda69 ]
Since commit 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
platform_get_irq() can return -EPROBE_DEFER. However, the driver overrides
an error returned by that function with -ENOENT which breaks the deferred
probing. Propagate upstream an error code returned by platform_get_irq()
and remove the bogus "platform" from the error message, while at it...
Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2258ee58baa554609a3cc3996276e4276f537b6d ]
Beacons are not updated to reflect TIM changes. This is not compliant with
power-saving client stations as the beacons do not have valid TIM and can
cause the network to stall at random occasions and to have highly variable
latencies.
Fix it by updating beacon templates on mac80211 set_tim callback.
Addresses an issue described in:
https://marc.info/?i=20180911163534.21312d08%20()%20manjaro
Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 473af09b56dc4be68e4af33220ceca6be67aa60d ]
eeh_add_to_parent_pe() sometimes removes the EEH_PE_KEEP flag, but it
incorrectly removes it from pe->type, instead of pe->state.
However, rather than clearing it from the correct field, remove it.
Inspection of the code shows that it can't ever have had any effect
(even if it had been cleared from the correct field), because the
field is never tested after it is cleared by the statement in
question.
The clear statement was added by commit 807a827d4e ("powerpc/eeh:
Keep PE during hotplug"), but it didn't explain why it was necessary.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 014704e6f54189a203cc14c7c0bb411b940241bc ]
The "count < sizeof(struct os_area_db)" comparison is type promoted to
size_t so negative values of "count" are treated as very high values
and we accidentally return success instead of a negative error code.
This doesn't really change runtime much but it fixes a static checker
warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec23df2b0cf3e1620f5db77972b7fb735f267eff ]
Reservations in gfs can span multiple gfs2_bitmaps (but they won't span
multiple resource groups). When removing a reservation, we want to
clear the GBF_FULL flags of all involved gfs2_bitmaps, not just that of
the first bitmap.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2130e82e9454304e9b91ba9da551b5989af8c27 ]
The way we calculate logbuf free space percentage overflows signed
integer:
int free;
free = __LOG_BUF_LEN - log_next_idx;
pr_info("early log buf free: %u(%u%%)\n",
free, (free * 100) / __LOG_BUF_LEN);
We support LOG_BUF_LEN of up to 1<<25 bytes. Since setup_log_buf() is
called during early init, logbuf is mostly empty, so
__LOG_BUF_LEN - log_next_idx
is close to 1<<25. Thus when we multiply it by 100, we overflow signed
integer value range: 100 is 2^6 + 2^5 + 2^2.
Example, booting with LOG_BUF_LEN 1<<25 and log_buf_len=2G
boot param:
[ 0.075317] log_buf_len: -2147483648 bytes
[ 0.075319] early log buf free: 33549896(-28%)
Make "free" unsigned integer and use appropriate printk() specifier.
Link: http://lkml.kernel.org/r/20181010113308.9337-1-sergey.senozhatsky@gmail.com
To: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51e68fb0929c29e47e9074ca3e99ffd6021a1c5a ]
In some error paths, reference count of firewire unit is not decreased.
This commit fixes the bug.
Fixes: 5b14ec25a79b('ALSA: firewire: release reference count of firewire unit in .remove callback of bus driver')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65a576e27309120e0621f54d5c81eb9128bd56be ]
NL80211_TX_POWER_LIMITED was treated as NL80211_TX_POWER_AUTOMATIC,
which is the opposite of what should happen and can cause nasty
regulatory problems.
if/else converted to a switch without default to make gcc warn
on unhandled enum values.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea893695ec1131a5fed0523ff8094bc6e8723bbe ]
A recent bugfix added a call to i8042_install_filter but did
not add the dependency, leading to possible link errors:
drivers/platform/built-in.o: In function `asus_nb_wmi_quirks':
asus-nb-wmi.c:(.text+0x23af): undefined reference to `i8042_install_filter'
This adds a dependency on SERIO_I8042||SERIO_I8042=n to indicate
that we can build the driver when the i8042 driver is disabled,
but it cannot be built-in when that is a loadable module.
Fixes: b5643539b825 ("platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 401fee8195d401b2b94dee57383f627050724d5b ]
Commit 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will
handle the display off hotkey") causes the backlight to be permanently off
on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC
1015BX, Asus EeePC 1025C).
The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added
by that commit is made conditional in this commit and only enabled in
the quirk_entry structs in the asus-nb-wmi driver fixing the broken
display / backlight on various EeePC laptop models.
Cc: João Paulo Rechi Vita <jprvita@endlessm.com>
Fixes: 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db2582afa7444a0ce6bb1ebf1431715969a10b06 ]
This patch adds support for ALS on the Zenbook UX430UQ to the asus_nb_wmi
driver. It also renames "quirk_asus_ux330uak" to "quirk_asus_forceals"
because it is now used for more than one model of computer, and should
thus have a more general name.
Signed-off-by: Kiernan Hager <kah.listaddress@gmail.com>
[andy: massaged commit message, fixed indentation and commas in the code]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9b615186805e2c18a0ac76aca62c1543ecfdbb8 ]
some laptops, for example ASUS UX330UAK, have brocken als_get function
but working als_set funktion. In this case, ALS will stay turned off.
Method (WMNB, 3, Serialized)
{
...
If (Local0 == 0x53545344)
{
...
If (IIA0 == 0x00050001)
{
If (!ALSP)
{
Return (0x02)
}
Local0 = (GALS & 0x10) <<<---- bug,
should be: (GALS () & 0x10)
If (Local0)
{
Return (0x00050001)
}
Else
{
Return (0x00050000)
}
}
.....
If (Local0 == 0x53564544)
{
...
If (IIA0 == 0x00050001)
{
Return (ALSC (IIA1))
}
......
Method (GALS, 0, NotSerialized)
{
Local0 = Zero
Local0 |= 0x20
If (ALAE)
{
Local0 |= 0x10
}
Local1 = 0x0A
Local1 <<= 0x08
Local0 |= Local1
Return (Local0)
}
Since it works without problems on Windows I assume ASUS WMI driver for Win
never trying to get ALS state, and instead it is setting it by default to ON.
This patch will do the same. Turn ALS on by default.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aca234f6378864d85514be558746c0ea6eabfa8e ]
Asus Zenbook ux31a is providing ACPI0008 interface for ALS
(Ambient Light Sensor), which is accessible for OS => Win 7.
This sensor can be used with iio/acpi-als driver.
Since it is disabled by default, we should use asus-wmi
interface to enable it.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5643539b82559b858b8efe3fc8343f66cf9a0b5 ]
Some revisions of the ASUS Q500A series have a keyboard related
issue which is reproducible only after Windows with installed ASUS
tools is started.
In this case the Linux side will have a blocked keyboard or
report incorrect or incomplete hotkey events.
To make Linux work properly again, a complete power down
(unplug power supply and remove battery) is needed.
Linux/atkbd after a clean start will get the following code on VOLUME_UP
key: {0xe0, 0x30, 0xe0, 0xb0}. After Windows, the same key will generate
this codes: {0xe1, 0x23, 0xe0, 0x30, 0xe0, 0xb0}. As result atkdb will
be confused by buggy codes.
This patch is filtering this buggy code out.
https://bugzilla.kernel.org/show_bug.cgi?id=119391
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Cc: Alex Henrie <alexhenrie24@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: acpi4asus-user@lists.sourceforge.net
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
[dvhart: Add return after pr_warn to avoid false confirmation of filter]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b7ff2af5286a8c6bec7ff5f4df62e3506c1674e ]
The Asus Z550MA has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion. quirk_no_rfkill prevents asus-wmi
from registering RFKill switches at all for this laptop and allows
asus-wireless to drive the LED through the ASHS ACPI device.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: Ming Shuo Chiu <chiu@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02db9ff7af18f7ace60f430cbbaa1d846b350916 ]
The Asus U303LB has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion. quirk_no_rfkill prevents asus-wmi
from registering RFKill switches at all for this laptop and allows
asus-wireless to drive the LED through the ASHS ACPI device.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: Mousou Yuu <guogaishiwo@gmail.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d735244b798f0c8bf93ace1facfafdc1f7a4e6e ]
The Asus N552VW has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion. quirk_no_rfkill prevents asus-wmi
from registering RFKill switches at all for this laptop and allows
asus-wireless to drive the LED through the ASHS ACPI device.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a961a285b479977fa21f12f71cd62f28adaba17c ]
The Asus X456UF has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion.
quirk_no_rfkill prevents asus-wmi from registering RFKill switches at
all for this laptop and allows asus-wireless to drive the LED through
the ASHS ACPI device. This laptop already has a quirk for setting
WAPF=4, so this commit creates a new quirk, quirk_no_rfkill_wapf4, which
both disables rfkill and sets WAPF=4.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: Carlo Caione <carlo@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a977e59c0c67c9d492bb16677ce66d67cae0ebd8 ]
Some Asus laptops that have an airplane-mode indicator LED, also have
the WMI WLAN user bit set, and the following bits in their DSDT:
Scope (_SB)
{
(...)
Device (ATKD)
{
(...)
Method (WMNB, 3, Serialized)
{
(...)
If (LEqual (IIA0, 0x00010002))
{
OWGD (IIA1)
Return (One)
}
}
}
}
So when asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store the
wlan state, it drives the airplane-mode indicator LED (through the call
to OWGD) in an inverted fashion: the LED is ON when airplane mode is OFF
(since wlan is ON), and vice-versa.
This commit creates a quirk to not register a RFKill switch at all for
these laptops, to allow the asus-wireless driver to drive the airplane
mode LED correctly through the ASHS ACPI device. It also adds a match to
that quirk for the Asus X555UB, which is affected by this problem.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9a63236f1ad82d71a98aa80320b6cb618fb32f44 upstream.
It's possible to hit the WARN_ON_ONCE(page_mapped(page)) in
remove_stable_node() when it races with __mmput() and squeezes in
between ksm_exit() and exit_mmap().
WARNING: CPU: 0 PID: 3295 at mm/ksm.c:888 remove_stable_node+0x10c/0x150
Call Trace:
remove_all_stable_nodes+0x12b/0x330
run_store+0x4ef/0x7b0
kernfs_fop_write+0x200/0x420
vfs_write+0x154/0x450
ksys_write+0xf9/0x1d0
do_syscall_64+0x99/0x510
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Remove the warning as there is nothing scary going on.
Link: http://lkml.kernel.org/r/20191119131850.5675-1-aryabinin@virtuozzo.com
Fixes: cbf86cfe04 ("ksm: remove old stable nodes more thoroughly")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94b07b6f9e2e996afff7395de6b35f34f4cb10bf upstream.
This reverts commit 56e94ea132bb5c2c1d0b60a6aeb34dcb7d71a53d.
Commit 56e94ea132bb ("fs: ocfs2: fix possible null-pointer dereferences
in ocfs2_xa_prepare_entry()") introduces a regression that fail to
create directory with mount option user_xattr and acl. Actually the
reported NULL pointer dereference case can be correctly handled by
loc->xl_ops->xlo_add_entry(), so revert it.
Link: http://lkml.kernel.org/r/1573624916-83825-1-git-send-email-joseph.qi@linux.alibaba.com
Fixes: 56e94ea132bb ("fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Thomas Voegtle <tv@lio96.de>
Acked-by: Changwei Ge <gechangwei@live.cn>
Cc: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 723eb53690041740a13ac78efeaf6804f5d684c9 ]
The workqueue only exists for the primary PF. For other functions
we hit a WARN_ON in kernel/workqueue.c.
Fixes: 7c236c43b8 ("sfc: Add support for IEEE-1588 PTP")
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 34e59836565e36fade1464e054a3551c1a0364be ]
ethtool expects ETHTOOL_GRXCLSRLALL to set ethtool_rxnfc->data with the
total number of entries in the rx classifier table. Surprisingly, mlx4
is missing this part (in principle ethtool could still move forward and
try the insert).
Tested: compiled and run command:
phh13:~# ethtool -N eth1 flow-type udp4 queue 4
Added rule with ID 255
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94bb804e1e6f0a9a77acf20d7c70ea141c6c821e upstream.
A number of our uaccess routines ('__arch_clear_user()' and
'__arch_copy_{in,from,to}_user()') fail to re-enable PAN if they
encounter an unhandled fault whilst accessing userspace.
For CPUs implementing both hardware PAN and UAO, this bug has no effect
when both extensions are in use by the kernel.
For CPUs implementing hardware PAN but not UAO, this means that a kernel
using hardware PAN may execute portions of code with PAN inadvertently
disabled, opening us up to potential security vulnerabilities that rely
on userspace access from within the kernel which would usually be
prevented by this mechanism. In other words, parts of the kernel run the
same way as they would on a CPU without PAN implemented/emulated at all.
For CPUs not implementing hardware PAN and instead relying on software
emulation via 'CONFIG_ARM64_SW_TTBR0_PAN=y', the impact is unfortunately
much worse. Calling 'schedule()' with software PAN disabled means that
the next task will execute in the kernel using the page-table and ASID
of the previous process even after 'switch_mm()', since the actual
hardware switch is deferred until return to userspace. At this point, or
if there is a intermediate call to 'uaccess_enable()', the page-table
and ASID of the new process are installed. Sadly, due to the changes
introduced by KPTI, this is not an atomic operation and there is a very
small window (two instructions) where the CPU is configured with the
page-table of the old task and the ASID of the new task; a speculative
access in this state is disastrous because it would corrupt the TLB
entries for the new task with mappings from the previous address space.
As Pavel explains:
| I was able to reproduce memory corruption problem on Broadcom's SoC
| ARMv8-A like this:
|
| Enable software perf-events with PERF_SAMPLE_CALLCHAIN so userland's
| stack is accessed and copied.
|
| The test program performed the following on every CPU and forking
| many processes:
|
| unsigned long *map = mmap(NULL, PAGE_SIZE, PROT_READ|PROT_WRITE,
| MAP_SHARED | MAP_ANONYMOUS, -1, 0);
| map[0] = getpid();
| sched_yield();
| if (map[0] != getpid()) {
| fprintf(stderr, "Corruption detected!");
| }
| munmap(map, PAGE_SIZE);
|
| From time to time I was getting map[0] to contain pid for a
| different process.
Ensure that PAN is re-enabled when returning after an unhandled user
fault from our uaccess routines.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: 338d4f49d6 ("arm64: kernel: Add support for Privileged Access Never")
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
[will: rewrote commit message]
[will: backport for 4.4.y stable kernels]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dd8fd2cbc73f8650f651da71fc61a6e4f30c1566 ]
The rxconf and txconf structs are allocated on the
stack, so make sure we zero them before filling out
the relevant fields.
Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80df9be67c44cb636bbc92caeddad8caf334c53c ]
Fixes a harmless underflow issue when CCK rates are actively being used
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f67f7583e77fe5dc57aab3a6159c2642544eaad ]
Probe deferrals aren't actual errors, so silence the error message in
case the PWM cannot yet be acquired.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f18aef742c8fbd68e280dff0a63ba0ca6ee8ad85 ]
On at least x86 and ARM64, and as documented in the ptrace man page
a skipped system call will still cause a syscall exit ptrace stop.
Previous to this commit 32-bit ARM did not, resulting in strace
being confused when seccomp skips system calls.
This change also impacts programs that use ptrace to skip system calls.
Fixes: ad75b51459 ("ARM: 7579/1: arch/allow a scno of -1 to not cause a SIGILL")
Signed-off-by: Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Eugene Syromyatnikov <evgsyr@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Eugene Syromyatnikov <evgsyr@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 605b3bec73cbd74b4ac937b580cd0b47d1300484 ]
spidev will make a big fuss if a device tree node binds a device by
using "spidev" as the node's compatible property.
However, the logic for this isn't looking for "spidev" in the
compatible, but rather checking that the device is NOT compatible with
spidev's list of devices.
This causes a false positive if a device not named "rohm,dh2228fv", etc.
binds to spidev, even if a means other than putting "spidev" in the
device tree was used. E.g., the sysfs driver_override attribute.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70728c29465bc4bfa7a8c14304771eab77e923c7 ]
The priv->data->set can be NULL while flags contains GPIO_SYSCON_FEAT_OUT
and chip->set is valid pointer. This happens in case the controller uses
the default GPIO setter. Always use chip->set to access the setter to avoid
possible NULL pointer dereferencing.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51fbf14f2528a8c6401290e37f1c893a2412f1d3 ]
The only use of KEXEC_BACKUP_SRC_END is as an argument to
walk_system_ram_res():
int crash_load_segments(struct kimage *image)
{
...
walk_system_ram_res(KEXEC_BACKUP_SRC_START, KEXEC_BACKUP_SRC_END,
image, determine_backup_region);
walk_system_ram_res() expects "start, end" arguments that are inclusive,
i.e., the range to be walked includes both the start and end addresses.
KEXEC_BACKUP_SRC_END was previously defined as (640 * 1024UL), which is the
first address *past* the desired 0-640KB range.
Define KEXEC_BACKUP_SRC_END as (640 * 1024UL - 1) so the KEXEC_BACKUP_SRC
region is [0-0x9ffff], not [0-0xa0000].
Fixes: dd5f726076 ("kexec: support for kexec on panic using new system call")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Brijesh Singh <brijesh.singh@amd.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Ingo Molnar <mingo@redhat.com>
CC: Lianbo Jiang <lijiang@redhat.com>
CC: Takashi Iwai <tiwai@suse.de>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Vivek Goyal <vgoyal@redhat.com>
CC: baiyaowei@cmss.chinamobile.com
CC: bhe@redhat.com
CC: dan.j.williams@intel.com
CC: dyoung@redhat.com
CC: kexec@lists.infradead.org
Link: http://lkml.kernel.org/r/153805811578.1157.6948388946904655969.stgit@bhelgaas-glaptop.roam.corp.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32ae592036d7aeaabcccb2b1715373a68639a768 ]
Shifting the u8 value[3] by an int can lead to sign-extension
overflow. For example, if value[3] is 0xff and the shift is 24 then it
is promoted to int and then the top bit is sign-extended so that all
upper 32 bits are set. Fix this by casting value[3] to a u32 before
the shift.
Detected by CoverityScan, CID#1016522 ("Unintended sign extension")
Fixes: e0d3bafd02 ("V4L/DVB (10954): Add cx231xx USB driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1eb8d7387908022951792a46fa040ad3942b3b08 ]
Flushing the workqueue can cause operations to happen which might
call gfs2_log_reserve(), or get stuck waiting for locks taken by such
operations. gfs2_log_reserve() can io_schedule(). If this happens, it
will never wake because the only thing which can wake it is gfs2_logd()
which was already stopped.
This causes umount of a gfs2 filesystem to wedge permanently if, for
example, the umount immediately follows a large delete operation.
When this occured, the following stack trace was obtained from the
umount command
[<ffffffff81087968>] flush_workqueue+0x1c8/0x520
[<ffffffffa0666e29>] gfs2_make_fs_ro+0x69/0x160 [gfs2]
[<ffffffffa0667279>] gfs2_put_super+0xa9/0x1c0 [gfs2]
[<ffffffff811b7edf>] generic_shutdown_super+0x6f/0x100
[<ffffffff811b7ff7>] kill_block_super+0x27/0x70
[<ffffffffa0656a71>] gfs2_kill_sb+0x71/0x80 [gfs2]
[<ffffffff811b792b>] deactivate_locked_super+0x3b/0x70
[<ffffffff811b79b9>] deactivate_super+0x59/0x60
[<ffffffff811d2998>] cleanup_mnt+0x58/0x80
[<ffffffff811d2a12>] __cleanup_mnt+0x12/0x20
[<ffffffff8108c87d>] task_work_run+0x7d/0xa0
[<ffffffff8106d7d9>] exit_to_usermode_loop+0x73/0x98
[<ffffffff81003961>] syscall_return_slowpath+0x41/0x50
[<ffffffff815a594c>] int_ret_from_sys_call+0x25/0x8f
[<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: Tim Smith <tim.smith@citrix.com>
Signed-off-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a26ac6c1bed951b2066cc4b2257facd919e35c0b ]
In isif_probe(), there is a while loop to get the ISIF base address and
linearization table0 and table1 address. In the loop body, the function
platform_get_resource() is called to get the resource. If
platform_get_resource() returns NULL, the loop is terminated and the
execution goes to 'fail_nobase_res'. Suppose the loop is terminated at the
first iteration because platform_get_resource() returns NULL and the
execution goes to 'fail_nobase_res'. Given that there is another while loop
at 'fail_nobase_res' and i equals to 0, one iteration of the second while
loop will be executed. However, the second while loop does not check the
return value of platform_get_resource(). This can cause a NULL pointer
dereference bug if the return value is a NULL pointer.
This patch avoids the above issue by adding a check in the second while
loop after the call to platform_get_resource().
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6fe3e5b7d16e8f146a4ae7fe481bc6e97acde1e ]
The current printk() is ready to handle log buffer size up to 2G.
Give an explicit error for users who want to use larger log buffer.
Also fix printk formatting to show the 2G as a positive number.
Link: http://lkml.kernel.org/r/20181008135916.gg4kkmoki5bgtco5@pathway.suse.cz
Cc: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek: Fixed to the really safe limit 2GB.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cea645ae9c5a54aa7904fddb2cdf250acd63a6c ]
Clang warns that the address of a pointer will always evaluated as true
in a boolean context.
drivers/video/backlight/lm3639_bl.c:403:14: warning: address of
'pchip->cdev_torch' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (&pchip->cdev_torch)
~~ ~~~~~~~^~~~~~~~~~
drivers/video/backlight/lm3639_bl.c:405:14: warning: address of
'pchip->cdev_flash' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (&pchip->cdev_flash)
~~ ~~~~~~~^~~~~~~~~~
2 warnings generated.
These statements have been present since 2012, introduced by
commit 0f59858d51 ("backlight: add new lm3639 backlight
driver"). Given that they have been called unconditionally since
then presumably without any issues, removing the always true if
statements to fix the warnings without any real world changes.
Link: https://github.com/ClangBuiltLinux/linux/issues/119
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf089611f4c446285046fcd426d90c18f37d2905 ]
Lianbo reported a build error with a particular 32-bit config, see Link
below for details.
Provide a weak copy_oldmem_page_encrypted() function which architectures
can override, in the same manner other functionality in that file is
supplied.
Reported-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: x86@kernel.org
Link: http://lkml.kernel.org/r/710b9d95-2f70-eadf-c4a1-c3dc80ee4ebb@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46010141da6677b81cc77f9b47f8ac62bd1cbfd3 ]
Recal cached_dev_sectors on cached_dev detached, as recal done on
cached_dev attached.
Update the cached_dev_sectors before bcache_device_detach called
as bcache_device_detach will set bcache_device->c to NULL.
Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5017716adb8aa5c01c52386c1b7470101ffe9c5 ]
The "index + count" addition can overflow. Both come directly from the
user. This bug leads to an information leak.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Peter Malone <peter.malone@gmail.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
