It is recommended [1] to use synchronize_rcu to simplify the code -
especially when otherwise extra locking is needed to protect other code
from picking stale elements. It also protects us for emitting to many
callbacks which may results in OOM conditions.
The only reason not to use it, would be in performance critical sections
or when we are not allowed to block.
[1] Documentation/RCU/checklist.txt
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Regions which do not use rcu functions don't need to protected by
rcu_read_lock. If we want to protect data from being freed than it must
be covered by the same read-side critical section or otherwise the grace
period may already ended and freed the memory before we called
rcu_read_lock again.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
receive_bat_packet is not called with rcu_read_lock so we must ensure by
ourself that we protect list_for_each_entry_rcu using the correct RCU
locks.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The update critical sections of if_list must be protected by a locking
primitive other than RCU. The iterator must also be protected by the
chosen locking mechanism.
The rtnl_lock in hardif_remove_interfaces must also be moved outside the
iterator primitive to ensure that we don't deadlock the kernel due to
differently nested locks in hardif_remove_interfaces and hard_if_event.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
synchronize_rcu respective synchronize_net only waits for the rcu grace
period to elapse and we may fail to finish the calls which were made to
call_rcu in that time. In result the module could be unloaded during the
execution of the RCU callbacks.
rcu_barrier[1] will now wait for all outstanding RCU callbacks to finish
before continuing.
[1] Documentation/RCU/rcubarrier.txt
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We don't allow to seek in the debugfs socket and log files. Thus we
should mark the file descriptor as nonseekable.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The official mailing list is run on lists.open-mesh.org and it should be
avoided to sent them to lists.open-mesh.net to reduce the number of
receipents and double posts.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
checkpatch now detects the start of a comment and warns about usage of
multiple spaces at the beginning of a line. We have to replace the ' '
in multiple lines comments by ' * ' to fix it.
Checkpatch also wants a comment after a definition of a spinlock_t which
describes what it protects. It is currently not possible to add it
before the actual struct which includes the spinlock.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Platform devices tend to have id as -1 when only 1 device exist and
a value >=0 when multiple devices exist, since we plan to store all
these platform devices if multiple exist, there was a requirement to
have id to be >=0.
The patch fixes this problem.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
keucr lost the disconnect,
so keucr crash when plug-in and then plug-out SD-card quickly.
unmark the part of usb disconnect
Signed-off-by: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed the last 5 lines, indented with spaces, replacing spaces with tabs.
Signed-off-by: Clelia V. Korol <cvkorol@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I remove parenthesis for a return variable, and also delete a space and tab the code line
Signed-off-by: matias <munozmatiasn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Added an space after the definition of the variable MSG_LEVEL_INFO on line 43
Signed-off-by: Emanuel Mariano Ravera <ravera.emanuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed not required parentheses in return statements.
Signed-off-by: Diego H. Iglesias <diegohi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ai_count and ao_counter are unsigned, check for < 0 doesn't make sense.
Cast them to int.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
chd_dec_major is unsigned, so check chd_dec_major < 0 doesn't make sense.
Since it is used as signed, declare it as int.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
video_nr is unsigned, so check video_nr >= 0 doesn't make sense.
The only "negative" value may be -1, so explicitly check for it.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Handle build case of CONFIG_PM not being enabled.
drivers/staging/bcm/InterfaceInit.c:280: error: 'struct usb_device' has no member named 'autosuspend_delay'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix lots of printk format warnings in bcm. Here is a sample of them:
drivers/staging/bcm/CmHost.c:1955: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/staging/bcm/CmHost.c:1955: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'long unsigned int'
drivers/staging/bcm/CmHost.c:1955: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/staging/bcm/LeakyBucket.c:85: warning: format '%d' expects type 'int', but argument 4 has type 'long int'
drivers/staging/bcm/LeakyBucket.c:85: warning: format '%d' expects type 'int', but argument 3 has type 'long int'
drivers/staging/bcm/LeakyBucket.c:85: warning: format '%d' expects type 'int', but argument 4 has type 'long int'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
keucr driver has a build error when CONFIG_PM is not enabled, so fix that.
drivers/staging/keucr/usb.c:42: error: 'struct us_data' has no member named 'suspend_resume_hook'
drivers/staging/keucr/usb.c:43: error: 'struct us_data' has no member named 'suspend_resume_hook'
drivers/staging/keucr/usb.c:64: error: 'struct us_data' has no member named 'suspend_resume_hook'
drivers/staging/keucr/usb.c:65: error: 'struct us_data' has no member named 'suspend_resume_hook'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Update keucr TODO with additional work items.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are many locations where MAC or BSSID is printed. The plain format
is used in such places. *printf() in kernel recognizes
%pM, %pMF and %pm format parameters to print out 6-byte array as MAC
address. This patch changes plain format to custom %pM which is widely
used in kernel.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch includes changing some defines, necessary for compilation
with the linux-next tree.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch remove file system specific (fat_get_block) and vfs calls
from the cyasgadget driver. The current implementation expects user
space to write the file (open, seek to end, 1 byte write), followed by a
call to clear the dirty pages from the the page cache.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
