This patch adds support for the Line 6 POD HD400 to the line6usb driver.
Signed-off-by: Chris Bajumpaa <cbajumpa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A previous set of patches were test compiled with one of the configuration
variables not set. As a result, a number of unused variables were left in the
code.
In several instances, declaration of the unused variable was the only statement
inside ifdef .. endif pairs. In those cases, the entire block was removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A line in the P2P code had been removed in the process of converting the vendor
driver to a form suitable for the kernel. The output of this call was ignored,
and the initial analysis incorrectly determined that the call had no other
effect.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The checking condition in 'validateFlash2xReadWrite()' is not
sufficient. A large number invalid would cause an integer overflow and
pass the condition, which could cause further integer overflows in
'Bcmchar.c:bcm_char_ioctl()'.
Signed-off-by: Wenliang Fan <fanwlexca@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up the multi-line comment and tidy the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The counter->chip_index will always be < counters_per_chip due to the
initialization of the subdevices during the attach of the board.
The dma_selection_counter() helper just does a BUG_ON() check before
returning the original value. Just use the original value directly
in the caller and remove the helper function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a local variable for the 'counter->chip_index' to help shorten the
long lines and clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As prefered by the CodingStyle, rename this CamelCase enum and its labels.
Also, cleanup the ni_gpct_to_660x_register() helper function. Just return the
ni_660x_register for each ni_gpct_register and remove the unnecessary break
statements after the return statements.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the parameters to ni_tio_cmd() to make it a proper comedi
(*do_cmd) function.
The wrappers in the ni_660x and ni_mio_common modules are still needed
to request the mite channel and setup the device before actually doing
the command.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the parameters to ni_tio_cmdtest() to make it a proper comedi
(*do_cmdtest) function. This allows using it directly and removing the
wrapper functions in the ni_660x and ni_mio_common modules.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the parameters to ni_tio_insn_config() to make it a proper comedi
(*insn_config) function. This allows using it directly and removing the
wrapper functions in the ni_660x and ni_mio_common modules.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the parameters to ni_tio_winsn() to make it a proper comedi
(*insn_write) function. This allows using it directly and removing the
wrapper functions in the ni_660x and ni_mio_common modules.
For aesthetics, rename the function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the parameters to ni_tio_rinsn() to make is a proper comedi
(*insn_read) function. This allows using it directly and removing the
wrapper functions in the ni_660x and ni_mio_common modules.
For aesthetics, rename the function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This inline helper function simply returns the s->private void *.
Remove the helper and just get the s->private void * directly where
needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'extern' is not required, remove it.
Tidy up the function prototypes a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, move all the MODULE_* information to the end of the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, move all the MODULE_* information to the end of the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a local variable for the 'counter->counter_index' to help shorten the
long lines and ugly line breaks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a local variable for the 'counter->counter_index' to help shorten the
long lines and ugly line breaks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "HW Save" registers are the only ones missing an access macro.
Add one for completness.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "Interrupt Enable" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "Status" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Rename the define for the shared status register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "Interrupt Acknowledge" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "ABZ" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "DMA Status" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "DMA Config" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The shared "Status2" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The shared "Status1" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The shared "Reset" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The shared "Status" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "Second Gate" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "Counting Mode" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "Input Select" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "LoadB" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "LoadA" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "Mode" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "SW Save" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "Command" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "AutoIncrement" registers are sequential in the enum ni_gpct_register.
Replace this inline CamelCase function with a simple define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As prefered by the CodingStyle, rename all the CamelCase labels of the
enum ni_gpct_register.
Cleanup all the helper functions in ni_tio_internal.h that used the enum.
The 'counter_index' parameter to all the functions is the ni_gpct_device
'counter_index' which is initialized when the subdevices are setup. This
value is always < 4 so the default: BUG() cases can never happen. For
aesthetics, rename the 'counter_idx' to simply 'idx' and fix the type in
some of the helpers.
Also, remove the unnecessary break statements after the return statements.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes all the warning related to spacing issues
found by checkpatch.pl script in InterfaceIdleMode.c
Signed-off-by: Gokulnath Avanashilingam <Gokulnath.Avanashilingam@in.bosch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Used the time_after and time_before insted of comparing
the jiffies directly.This will fix the warnings and errors
found by the checkpatch.pl script.
Signed-off-by: Gokulnath Avanashilingam <Gokulnath.Avanashilingam@in.bosch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed all the line over 80 characters warning found by
checkpatch.pl script.
Signed-off-by: Gokulnath Avanashilingam <Gokulnath.Avanashilingam@in.bosch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed the developer debug prints BCM_DEBUG_PRINT()
as per the TODO list, also removed braces for the
if-statement to match coding style
Signed-off-by: Gokulnath Avanashilingam <Gokulnath.Avanashilingam@in.bosch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the missing destroy_workqueue() before return from
sep_crypto_setup() and sep_crypto_takedown().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of error, the function crypto_alloc_hash() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch mentioned that these macros should be defined with a 'do {...} while(0)' statement.
So we used grep to find all files using these macros and we found out that these macros were only used
in rtl819x_Qos.h, in the defines we removed before.
Since the macros are not used anywhere else we decided to remove them from the driver.
Signed-off-by: Andreas Frembs <andreas.frembs@studium.uni-erlangen.de>
Signed-off-by: Matthias Schoepe <matthias.schoepe@studium.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In rtl819x_Qos.h there were several macros defined but never used.
So we removed this macros.
Signed-off-by: Andreas Frembs <andreas.frembs@studium.uni-erlangen.de>
Signed-off-by: Matthias Schoepe <matthias.schoepe@studium.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch errors from rtllib_endianfree.h:
- ERROR: Macros with complex values should be enclosed in parenthesis
Signed-off-by: Andreas Frembs <andreas.frembs@studium.uni-erlangen.de>
Signed-off-by: Matthias Schoepe <matthias.schoepe@studium.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this patch we fix some "logical" errors in bypass.c of the silicom bypass
driver (in staging).
Checkpatch complains about the following errors:
- unnecessary forward declarations in a source file
- assignment in if condition
In addition to that the __init and __exit macros were missing at the init and
cleanup function.
There are still two warnings left for this file related to too many leadingtabs
at nested blocks. I did not touch this issue becasue the code needs really some
refactoring. And since i do not have the appropriate hardware to test the code,
i do not change the functionality in any way.
Signed-off-by: Michael Hoefler <michael.hoefler@studium.uni-erlangen.de>
Signed-off-by: Christoph Kohl <christoph.kohl@t-online.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
