QMI handle was not destroyed during unload and server exit
and resulting in qmi handle leak.
Fix this problem by destroying the QMI handle during
driver unload and server exit.
Change-Id: I7557de7c2ff2cb7d82d6e8a3480e8d5f4be6a5f4
Signed-off-by: Govind Singh <govinds@codeaurora.org>
A3xx device gets the ring buffer read pointer directly
from the GPU registers. So don’t allocate scratch memory
which can’t be used for A3xx GPU devices.
Change-Id: I95016dfc169b9fee74e978f5560592740f34515e
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
Stall on page fault feature is supported on A5XX and later GPUs.
Enabling this feature on unsupported GPUs causes GPU faults.
So don't insert GPU stall related commands in ringbuffer if
not supported. But allow user to capture the GPU snapshot on
GPU page fault.
Change-Id: Ied26a5b4f44c1877b289a0ff5c0a6d47901e453d
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use
tty_port_close") created a case where a port used for a console does not
get shutdown on tty closing. Then a call to uart_tx_stopped() segfaults
because the tty is NULL. This could be fixed to restore old behavior,
but we also want to allow tty_ports to work without a tty attached. So
this change to allow a NULL tty_struct is needed either way.
Fixes: 761ed4a94582
("tty: serial_core: convert uart_close to use tty_port_close")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change-Id: Ifbeeacc89d396b857332ce94cc2d77bdd6e12bb7
Git-repo: git://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git
Git-commit: a727b025f43d7952c0697562f5cecda9f42758aa
Signed-off-by: Lei wang <leiwan@codeaurora.org>
Add a node for a GPIO-based FAN cooling device for msm8996
CV2X boards. This GPIO has a single speed and can be controlled
from user space.
Change-Id: Iee427407f3c4032e1394c61dd1f225e24a091a99
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Enable the GPIO FAN driver to enable control of GPIO based
fans for cooling on msm8996-auto devices.
Change-Id: I5494fae1c7ab75362bc6c71c4e731f0581b01995
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Currently, FULL_SOC and MONOTONIC_SOC registers are updated
multiple times when the recharge SOC threshold is close enough to
trigger the recharging frequently. This was leading to a SOC
fluctuation when SOC masking algorithm is enabled.
Rearrange charge_full_update used in SOC masking algorithm such
that FULL_SOC and MONOTONIC_SOC registers are updated just once
when the charge_full flag is cleared.
Also, when the device is rebooted/shutdown and if charge_full
flag is set, write to FULL_SOC with battery_soc and a full value
to MONOTONIC_SOC registers. This helps to maintain the same SOC
across a device reboot.
Change-Id: I95afa90f27e4c0f948f301ff8d6a1f84ae422ef0
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Add a device tree node for the SPI CAN controller to enable
a CAN network interface for msm8996 CV2X boards.
Change-Id: Ib9c1d63bf86e3b823aa8d762065ed374bdfeaa0e
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Enable configuration for K61 CAN over SPI driver.
Change-Id: I801629ac04303582530bed354282960db8f9c9ab
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Add new parameters to account for different MCUs that can
be used with this driver. These devices have different reset
sequences and number of bits per word supported via SPI. Add
bindings for the mpc5746c controller and make the reset signal
optional.
Change-Id: I616dd3cfedf18a6e21683e1c07551c57c62a675d
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
This driver creates Network device of type CAN
and processes tx and rx frames that it sends and
receives over SPI protocol.
Change-Id: I54a8665d1b9eda7e9b1ff695bd67de312c410195
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Signed-off-by: Abinaya P <abinayap@codeaurora.org>
The patch adds the support for buffering mode configuration
for peripherals not supporting diag_id.
CRs-Fixed: 2104591
Change-Id: I2ed34a5141a9b9042dc925c9109d22009b272484
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
Increase QMI ATHDIAG maximum data size to 6144 bytes so that it
can dump more bytes for debugging.
Change-Id: I21d6197ad67829c38586318d4e76a7c7fd4149c4
CRs-fixed: 2059087
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Information leak issue is reported in mpq_sdmx_log_level_write
function. Added check to validate count is not zero and initialize
the string.
Change-Id: Ieb2ed88c2d7d778c56be2ec3b9875270a9c74dce
Signed-off-by: Udaya Bhaskara Reddy Mallavarapu <udaym@codeaurora.org>
Current SD card resume function does not handle card
init failure but only prints resume error message.
This change powers off mmc host before exit resume
if card init fails.
Change-Id: Idc27d8ed8769b92373bb9770f5e706b18e76404d
Signed-off-by: Can Guo <cang@codeaurora.org>
