Power management irq wakeup mode is by default disabled.
Calling irq_set_irq_wake() on a disabled irq causes warning.
Remove irq_set_irq_wake() function from mdm_enable/disable_irqs
functions and set it once in probe.
Change-Id: Ib7f49ae101e6dc04790649d408c1722df8da8bd2
Signed-off-by: Arun KS <arunks@codeaurora.org>
Remove the HW SOC-based step-charging logic and enable
SW based step-charging.
The SW based step-charging uses the periodic WD bark
IRQ to notify the battery properties. The bark-time
can be changes using the property 'qcom,wd-bark-time-secs'
'qcom,step-charging-enable' enables the feature.
Change-Id: Ib162f3eb3f98a4e7f144bedc8c8cea40fbf6137a
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Send a KOBJ_CHANGE uevent when creating the wil6210 sysfs directory.
This is mainly needed so selinux policy rules will be applied when
the wil6210 module is dynamically loaded.
Change-Id: I4220c551b8792d419db7a380b16f3c87204be22a
Signed-off-by: Lior David <liord@codeaurora.org>
Move mixer control queue handling to be part of
playback stream in DSP transcode loopback driver.
CRs-Fixed: 2076617
Change-Id: Ia8067237f80d509f969cf454f5afa08aaa6b0e52
Signed-off-by: Siddartha Shaik <sshaik@codeaurora.org>
Currently the code makes liberal use of macros that print a log message
(with pr_err or pr_debug) and then passes the same string on to the
IPC logging mechanism. The problem is that it doesn't actually end up
being the same string in the binary. Using pr_err or one of its friends
appends the KERN_* code to the front of the string with the pre-processor
and the IPC logger just uses the passed in string. Every string used by
the macros ends up appearing twice in the binary, once with KERN_*
prepended and the other not.
This change fix this duplication issue by appending KERN_* to the front
of the IPC logger.
Change-Id: Ibfdf9edf6e243d13cacf1a45838a88e287a684be
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Check is implemented in required function as part of
new implementation.
Change-Id: I346cd27cb254abe7d9706f01a9b463750614245e
Signed-off-by: Neeraj Soni <neersoni@codeaurora.org>
Vdev restart command triggers a vdev down and vdev stop in the
firmware. We do not need to send vdev down before sending vdev
restart to the firmware.
Skip vdev down command before we send the vdev restart command
for wcn3990 in the case of change in the channel context.
CRs-Fixed: 2079703
Change-Id: Idb611ec9ae8d40c7f7c3fe6efe853bf4c60d3123
Signed-off-by: Ashutosh Kumar <askuma@codeaurora.org>
KTM ignores software secure watchdog bite if it is a secure device
since this call support is not there in secure device. But API
scm_is_secure_device() returns false if it is secure device,
true otherwise. But KTM return value check is wrong and leads to
no secure watchdog bite call from KTM for all targets.
Fix return value check properly in KTM to resolve this issue.
Change-Id: I1612fee3f57f6c2d27c4329abc2c563b7b1d8102
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
'commit 9021973bac ("coresight-remote-etm: Adds missing lock to avoid
race condition")' adds lock inside remote_etm_rcv_msg() which is not
needed as we are waiting inside it for a response of request made
remote_etm_enable => qmi_send_req_wait() which already holds lock
'drvdata->mutex'.
So, adding 'drvdata->mutex' inside remote_etm_rcv_msg() adds wait for
the lock and due to which not able to ack the response got which results
in timeout error qmi_send_req_wait().
This patch fixes the above mentioned issue by removing the lock added in
above mentioned commit.
Change-Id: Ie47607722ff170e012d598a2347b1c0ec6913cdf
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Adding remote debugger device configuration. The Remote Debugger driver
allows a debugger running on a host PC to communicate with a remote
stub running on peripheral subsystems.
Change-Id: I4aa40846efbf11739d81a9fbe22df811903d8eee
Acked-by: Chenna Kesava Raju <chennak@qti.qualcomm.com>
Signed-off-by: Tharun Kumar Merugu <mtharu@codeaurora.org>
Peer create fails if the same peer has not been
properly deleted earlier.
Peer delete response indicates the successful deletion
of a peer. Wait for peer delete resp after every peer
delete cmd.
CRs-Fixed: 2079668
Change-Id: I48d6787a42f79d3ce1225c885ca9fa159ef6df77
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
For calculation of busy time and total time, KGSL relies on perf
counters and CPU clock. These can be a bit out of sync and may
give GPU busy greater than 100 percent. Updating time at the right
place will give more accurate total time and will avoid crossing
100% in GPU busy calculation.
Change-Id: I3cc702492325b9dc44ea2b705e4d9014d95abd33
Signed-off-by: Abhilash Kumar <krabhi@codeaurora.org>
In the scenario where the charging is terminated in the
JEITA soft condition, the HW is expected to restart
charging when battery temperature returns back to normal.
However, this does not work as expected and the charging
stays terminated. Fix this by disabling and re-enabling
charging CMD bit to restart charging.
CRs-Fixed: 2071261
Change-Id: I81d2a89c72ede840cc561b736ce1366c65da8c42
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Add board-id for UFS board which has a different board sub type.
Change-Id: Ic231784c46d4439944e403e26410515856fdc5fb
Signed-off-by: Lei wang <leiwan@codeaurora.org>
When calculating po->tp_hdrlen + po->tp_reserve the result can overflow.
Fix by checking that tp_reserve <= INT_MAX on assign.
Change-Id: If3b5fd73bd440de2a1050644b71ef7430f09810f
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Git-commit: bcc5364bdcfe131e6379363f089e7b4108d35b70
Signed-off-by: Dennis Cagle <dcagle@codeaurora.org>
When calculating rb->frames_per_block * req->tp_block_nr the result
can overflow.
Add a check that tp_block_size * tp_block_nr <= UINT_MAX.
Since frames_per_block <= tp_block_size, the expression would
never overflow.
Change-Id: I183d9adb8b90010f408b5e1d0785aa06814f4348
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Git-commit: 8f8d28e4d6d815a391285e121c3a53a0b6cb9e7b
Signed-off-by: Dennis Cagle <dcagle@codeaurora.org>
Not all targets support the DCI channel over MHI. Fix
error handling to only cleanup the failing device if
MHI registration fails.
Change-Id: I5ba23d69bc1fa3c08468d930f5f50151bfcd5bc0
Signed-off-by: Chris Lew <clew@codeaurora.org>
On an MHI down notification, the enabled state is set to 0 before
flushing the workqueue and buffers. This sanity check conflicts
with the down notification. Remove unneeded sanity check.
Change-Id: I6bedc353187bee907775347009e0d4157b0e35e2
Signed-off-by: Chris Lew <clew@codeaurora.org>
In order to support DT on DIAG, convert diag
bridge driver to platform driver.
Change-Id: I0ddecc06d9b4845d822799f3cff942789d1441c6
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
This can make sure MHI driver can safely free the memory which
is used by WLAN firmware since device is powered off.
Change-Id: If9d891eaf1ca7c28869448b3a0a42be713e16c2e
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Mark as rw when adding as linear target to allow changes
to the underlying filesystem through adb disable verity
and adb remount.
(Cherry-picked from
https://partner-android-review.googlesource.com/#/c/613573/
79a3032bb62da65a5d724eb70c8bdc662945d475)
BUG: 28845874
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: If41e9cad8e0f054f4778c09a6e2f0cb8af6fddaf
Git-commit: 492a6047e7
Git-repo: https://android.googlesource.com/kernel/common/
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Add MultiMedia21 capture and routing support for ASM
loopback from AUX PCM TX to QUAT TDM RX.
CRs-fixed: 2069348
Signed-off-by: Derek Chen <chenche@codeaurora.org>
Change-Id: I632392d98092ff31fa9bdb13c02eef8c2a0a54a3
Update bootargs with configuration of lpm_levels.sleep_disabled.
CRs-Fixed: 2079671
Change-Id: Iced6d6fc8e571b342a77ce49b4fa54bf511d7dbc
Signed-off-by: John Zhao <yuankuiz@codeaurora.org>
